Tab set Managment

Hi All Concerns,
i am developing app for iphone.. according to its screen resoulition i m bound to create 12 tabs. But i hav 20 pages means still 8 tabs to be created. So is there any option to handle this situtation ?
Help

I'm having the same problem here immediately after installing a second machine running Win 7. Both are RC and Ultimate, one 32 the other 64. The 64 bit version was reliably sleeping for months, but when I replaced a Vista machine with a Win 7 32 bit, BOTH keep each other awake in a vicious cycle.
I use powercfg /energy or /requests and get the same error as above. I have stripped all other connections from the network and de-selected Mediacenter and deleted the Homegroup that was working. Both did not help.
Since I don't know much on networking I am not sure where else to look, but I can reliably fix the problem in one PC by taking THE OTHER one off line or forcing a sleep. And it works symmetrically. It is particularly hard to diagnose as there is a long timeout of many minutes from disconnecting the network until the error message goes away .
The network adaptors have all been set to powerdown and not accept wake.
Any ideas? I see lots of posts on this but no answers other than suggesting some of the things above and that clealy does not help.

Similar Messages

Performance Tab in Manage Data Targets

Hi.
In the Performance tab of Manage Data Targets screen, under DB statistics, it's stated "10 percentage of IC data used to create statistics".
What does this mean?
Thanks,
Sai.

Hi Sai,
here is some info from SAP help:
"Specify the percentage rate of InfoCube data that is to be used for compiling statistics.
The larger the InfoCube is, the smaller the percentage rate you should select, as the system expenditure for compiling statisics increases with the increase in size."
"For up to 10 million entries in the InfoCube, you should set the percentage of InfoCube data, that is used for creating the statistics, to 100%."
Hope it helps!
Bye,
Roberto

Tab SET Problems

Apex 3.0
How do you delete a parent tab set?
As I have accidentally created a second parent tab set, I am finding it difficult to create new tabs within my main parent tab set. Any new tabs are automatically placed within the unwanted parent tab set.
Am I correct in saying there are 4 entities with tabs?
1. the parent tab set
2. the parent tab
3. the standard tab set
4. the standard tab
Gus..

What I do in 2.1 is...
go to your tab setup (Home > App builder > Application # > Shared Components > Tabs)
Select "Manage Parent Tabs" on the Right bar
Rename Parent Tab Set on Right Bar
Then Rename your set to the same on you curerntly use
Parent Tab Set to rename: BadPTS
New Name: CurrentPTS

How to switch between 2 Parent Tab Sets main and main2

Hi,
I have the following structure:
Parent-Tab-Set: main
Parent-Tab : Parent 1
Child-Tab : Child 1
Parent-Tab : Parent 2
Child-Tab : Child 2
Parent-Tab-Set: main2
Parent-Tab : Parent 3
Child-Tab : Child 3
Parent-Tab : Parent 4
Child-Tab : Child 4
Now I want to create a new Parent Tab in main, but always creates it in main2
My goal:
Parent-Tab-Set: main
Parent-Tab : Parent 1
Child-Tab : Child 1
Parent-Tab : Parent 2
Child-Tab : Child 2
Parent-Tab : Parent 5
Child-Tab : Child 5
Who understand this Tab-Thing... ;)
Thanks, Juergen

Hi Kappy,
well what you are saying is obvious to me. This is not the point for me and not what I wanted to know. But I think you answered my question anyway: OS X is unable to switch between windows of the same application as I mentioned in my example.
WHY NOT???
Every other OS is able to differentiate between windows and not just applications.
Another example: The Mail application and an Email editor window. When you are writing an Email and you want to switch to the main window of the Mail application to read something you must again use the mouse!
I mean Apple seems to be "somehow" using FreeBSD in the background and even in FreeBSD's window manager it is possible to switch between windows of the same application.
Well, in the Apple world it is always the pour user who is not intelligent enough to understand Apple's philosophy ;-(
To me this is not modern, it is simply a weakness of the OS.
Cheers
Quartz84

Parent Tab Set Problem with 1.6

Hi,
I came across a small issue when trying to add tabs (2 sets) to a non tab enabled application. Here are the steps to reproduce it:
1. Switch page default theme to 2 tab sets (edit theme)
2. Click on tabs link in page editor, takes you to tab manager with 2 add buttons, one on parent and one on tab set.
3. Click add parent (opens create parent tab wizard)
4. Enter Parent Tab Label then click next
5. Error: Tab set or new tab set must be specified.
It seems that the only way to create a parent tab set is through the new application wizard (defaults to main) or through the standard tab set wizard (Tab Parent). Do you think this should also be available through the create parent wizard?
I also had some problems with the automatic naming of the tabs. The wizards seem to be a little inconsistent, sometimes asking for a label (and deriving the name) and other times asking for the name. It gets very confusing when you have tabs and parent tabs named the same, especially with the addition of parent tab set and tab sets. Would it be possible to use a different prefix for the different tab types, e.g.
PTS_XXX (parent tab set)
PT_XXX (parent tab)
TS_XXX (tab set)
T_XXX (tab)
I'm really impressed with this product, but I think the tabs section tripped me up the most (page templates, page attributes, parent tab sets, parent tabs, tab sets, tabs, etc.) and the manual kind of glossed over a lot of it.
Thanks.
James Thorby
HTMLDB 1.6
Oracle 10G

Hello,
Ahg 1.6?
You really need to upgrade. If your not the one in charge of that start complaining to whoever is, there are so many enhancements and new features it would be hard to list them.
Regards,
Carl
blog : http://carlback.blogspot.com/
apex examples : http://apex.oracle.com/pls/otn/f?p=11933:5

Unique prob - often when I R-click a link in a page, FF goes "Not Resp" for up to 2 min - S/times crashes, or Re Starts with stalled tab set last on task bar.

Unique prob - often when I Right-click a link in a page, FF goes "Not Resp" for up to 2 mins, then most often Re Starts with the stalled tab set (of the window that I clicked in) moving to last place on the browser task bar. Roughly 1 in 5 times when it happens, FF crashes. Done copious searching here & elsewhere & it would appear this is unique, as I can't see this exact problem mentioned. I have the latest FF version & assume all add ons update at that time or auto do so, (all set to default). Have also updated to latest "flash / shock wave".

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the about:crashes page.
*You can open the about:crashes page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

How can I create a new standard tab set?

I have a tab set right now with one tab in it. How can I create a new tab set in an existing page with different tabs in it? Thanks.....

Hi,
Refer:
http://proskudin.blogspot.com/2007/06/two-level-tabs.html
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

Export to Word loses tab setting

Post Author: HmCody
CA Forum: .NET
I am very new to Crystal Reports with VS.net and have run into a problem that I hope isn't a bug.
I am creating a report that needs to be able to be exported to Word (it gets sent to the printer for inclusion in a program). Several of the text objects are formatted with right tabs set at the right edge of the object. Everything lines up perfectly when the report is viewed in the Report viewer and when I export to a pdf, but when I export to Word the right tabs are converted to left tabs and the text aligned to them is out of view.
Anyone have a clue as to why this is happening and if there is a way to fix it?
Thanks for your help.
Helenmary

Sorry - no pointers. Other than patience - this is a known issue, probably to be addressed in Service Pack 3 of Crystal reports. See Kb [1643979 - Crystal Reports for Visual Studio 2010 does not look for ForceLargerFonts registry key|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633343333333933373339%7D.do]
I have seen one or two reports of people using the below KBase with success (you'll have to modify the reg key to reflect CRVS2010). But most have no success. Testing this I did not have any success either, nor did I see the CRVS2010 engine looking for any of the keys noted in the KB....
[1644563 - How to create the ForceLargerFonts registry key when using Crystal Reports 2008 (12.x)|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633343334333533363333%7D.do]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Jan 19, 2012 6:37 AM

Can't set managed bean property:

Hi,
I am trying to experiment with JSF and I am extending an example I downloaded from the web. When I added a new secret field and extened the bean. I get the following error. I trying to resolve this problem from two days , cant figure out why I get this exception. I tried changed the property name I still get the same error. It is something to do with the bean, I am not sure why its not able to set the property, I know that the get and set methods exist in the class file. Any help would be greatly appreciated . I have pasted the bean file, faces-config.xml, and the inputname.jsp file below. Thanks a lot.
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: javax.faces.FacesException: javax.faces.FacesException: Can't set managed bean property: 'word'.
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:254)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:684)
 at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:432)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:356)
 at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
 at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:147)
 at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
 at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
 at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
 at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:684)
 at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:432)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:356)
 at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:430)
 at org.apache.jsp.index_jsp._jspService(index_jsp.java:48)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:210)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
 at org.jboss.web.tomcat.security.JBossSecurityMgrRealm.invoke(JBossSecurityMgrRealm.java:220)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.jboss.web.tomcat.tc4.statistics.ContainerStatsValve.invoke(ContainerStatsValve.java:76)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
 at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2417)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
 at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:65)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:577)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
 at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:197)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:781)
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:549)
 at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:605)
 at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:677)
 at java.lang.Thread.run(Thread.java:536)
root cause
javax.servlet.ServletException: javax.faces.FacesException: javax.faces.FacesException: Can't set managed bean property: 'word'.
 at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:531)
 at org.apache.jsp.inputname_jsp._jspService(inputname_jsp.java:94)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:210)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:684)
 at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:432)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:356)
 at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
 at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:147)
 at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
 at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
 at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
 at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:684)
 at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:432)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:356)
 at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:430)
 at org.apache.jsp.index_jsp._jspService(index_jsp.java:48)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:210)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
 at org.jboss.web.tomcat.security.JBossSecurityMgrRealm.invoke(JBossSecurityMgrRealm.java:220)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.jboss.web.tomcat.tc4.statistics.ContainerStatsValve.invoke(ContainerStatsValve.java:76)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
 at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2417)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
 at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:65)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:577)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
 at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
 at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:197)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:781)
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:549)
 at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:605)
 at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:677)
 at java.lang.Thread.run(Thread.java:536)
My JSP file is
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<f:loadBundle basename="demo.bundle.Messages" var="Message"/>
<HTML>
<HEAD> <title>Input Name Page</title> </HEAD>
<body bgcolor="white">
 <f:view>
 <h1><h:outputText value="#{Message.inputname_header}"/></h1>
 <h:messages style="color: red"/>
 <h:form id="helloForm" >
 <h:outputText value="#{Message.prompt}"/>
 <h:inputText id="userName" value="#{GetNameBean.userName}" required="true">
 <f:validateLength minimum="2" maximum="10"/>
 </h:inputText>
 <h:inputSecret id="word" value="#{GetNameBean.word}" required="true">
 <f:validateLength minimum="2" maximum="10"/>
 </h:inputSecret>
 <h:commandButton id="submit" action="sayhello" value="Say Hello" />
 </h:form>
</f:view>
</HTML>
My faces-config.xml is as follow
<?xml version="1.0"?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config>
<navigation-rule>
<from-view-id>/inputname.jsp</from-view-id>
<navigation-case>
<to-view-id>/greeting.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<managed-bean>
<description>
Input Value Holder
</description>
<managed-bean-name>GetNameBean</managed-bean-name>
<managed-bean-class>demo.GetNameBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>userName</property-name>
<property-class>java.lang.String</property-class>
<value></value>
 </managed-property>
 <managed-property>
<property-name>word</property-name>
 <property-class>java.lang.String</property-class>
 <value></value>
 </managed-property>
</managed-bean>
</faces-config>
My bean file is as follows GetNameBean.java
package demo;
* @author Sergey Smirnov. Exadel, Inc.
public class GetNameBean {
private String userName;
private String word;
* @return User Name
public String getUserName() {
return userName;
* @param User Name
public void setUserName(String name) {
this.userName = name;
* @return Password
public String getWord() {
return word;
* @param Password
public void setWord(String word) {
this.word = word;

Hello,
Thanks for the reply. I used Camelcase, but its giving me the same error. I am also posting my bean files and jsp files for your reference.
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: org.apache.jasper.JasperException: javax.faces.FacesException: javax.faces.FacesException: Can't set managed bean property: 'UserName'.
 javax.faces.webapp.FacesServlet.service(FacesServlet.java:121)
 org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
root cause
javax.faces.FacesException: org.apache.jasper.JasperException: javax.faces.FacesException: javax.faces.FacesException: Can't set managed bean property: 'UserName'.
 com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:327)
 com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:147)
 com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
 com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
 com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
 javax.faces.webapp.FacesServlet.service(FacesServlet.java:107)
 org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.20 logs.
LOGIN.JSP file
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core" %>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html" %>
<f:view>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<f:verbatim escape="false">
<head>
<title>My JSP 'login.jsp' starting page</title>
 <meta http-equiv="pragma" content="no-cache">
 <meta http-equiv="cache-control" content="no-cache">
 <meta http-equiv="expires" content="0">
 <meta http-equiv="keywords" content="keyword1,keyword2,keyword3">
 <meta http-equiv="description" content="This is my page">
 
</head>
</f:verbatim>
<body>
<h:form rendered="true" id="loginform">
<f:verbatim escape="false"> </f:verbatim>
<h:outputLabel for="userName" rendered="true"></h:outputLabel>
<h:inputText id="userName" required="true" rendered="true" value="#{UserBean.userName}"></h:inputText>
<f:verbatim escape="false"> </f:verbatim>
<h:outputLabel for="password" rendered="true"></h:outputLabel>
<h:inputSecret id="password" redisplay="false" required="true" rendered="true" value="#{UserBean.password}"></h:inputSecret>
<h:commandButton id="submit" action="#{UserBean.loginUser}" rendered="true" value=" Submit"></h:commandButton> </h:form>
</body>
</html>
</f:view>
UserBean file
package com.jsfdemo.bean;
import javax.faces.application.FacesMessage;
import javax.faces.context.FacesContext;
* @author ExterroAdmin
public final class UserBean extends Object
 private String password;
 private String userName;
 public UserBean()
 super();
 public String getPassword()
 return password;
 public void setPassword(String password)
 this.password = password;
 public String getUserName()
 return userName;
 public void setUserName(String userName)
 this.userName = userName;
 public String loginUser() {
if("myeclipse".equals(getUserName()) && "myeclipse".equals(getPassword()))
return "success";
FacesContext facesContext = FacesContext.getCurrentInstance();
FacesMessage facesMessage = new FacesMessage(
"You have entered an invalid user name and/or password");
facesContext.addMessage("loginForm", facesMessage);
return "failure";
If you need any more information, please let me know

Problems setting managed bean property of type Integer

I got a problem when I use valueBinding #{param.productId} in faces-config.xml for my managed bean:
My property 'productId' in bean Product is of type Integer, and my bean is in request scope. When I try to invoke some action on page, wich should navigate me to another view - JSF is trying to set productId for current view, and of course it is empty (""), and for the reasons given above I'm getting an error:
javax.faces.FacesException: Can't set managed bean property: 'applicationId'.
at com.sun.faces.config.ManagedBeanFactory.setPropertiesIntoBean(ManagedBeanFactory.java:576)
at com.sun.faces.config.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:233)
at com.sun.faces.application.ApplicationAssociate.createAndMaybeStoreManagedBeans(ApplicationAssociate.java:256)
... 60 more
Caused by: java.lang.NumberFormatException: For input string: ""
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:489)
at java.lang.Integer.<init>(Integer.java:609)
at com.sun.faces.config.ManagedBeanFactory.getConvertedValueConsideringPrimitives(ManagedBeanFactory.java:855)
at com.sun.faces.config.ManagedBeanFactory.setPropertiesIntoBean(ManagedBeanFactory.java:555)
Should I use requestScope instead of param to have my parameter null, and not "" ?
If so, how should I pass requestScope parameter using commandLink?

Hi! I have a problem with setting params too. Probably my one is different.
I have a jsp page which show a datatable, where I can see a row for each Product. If I click on its name I would navigate to another page that shows product informations, as several ecommerce sites do.
But I can't understand what and how I must set to inform the details page on which product have to show.
I read in this forum that it's possible to set a parameter in productBean, and then the constructor of product bean loads others fields knowing its id.
The snippet of my faces-config.xml is:
<managed-bean>
 <managed-bean-name>product</managed-bean-name>
 <managed-bean-class>test.backing.ProductBean</managed-bean-class>
 <managed-bean-scope>request</managed-bean-scope>
 <managed-property>
 <property-name>idToLoad</property-name>
 <property-class>java.lang.Integer</property-class>
 <value>#{param.id}</value>
 </managed-property>
</managed-bean>It is possible? is a correct solution? and if it is, how can I do that?
Thanks very much if someone can resolve my problem.
Claudio.

Ignore Tab-Setting in a JTextPane

Hello,
i have a JTextPane and I need a Tab Size 0. I want to ignore the Tab-Setting, cuz I got an XML-Editor, with automaticaly indent.
Does anyone Have an Idea ?

This thread might help:
http://forum.java.sun.com/thread.jsp?forum=57&thread=331679

Setting management interface WLC 7.4.121.0

Hello.
I have a problem setting Management interface IP in new controller 5508. I get the error "Error in setting management interface IP".I can not place a management controller IP.
Starting IPv6 Services: ok
Starting Config Sync Manager : ok
Starting Hotspot Services: ok
Starting PMIP Services: ok
Starting Portal Server Services: ok
Starting mDNS Services: ok
Starting Management Services:
Web Server: CLI: ok
Secure Web: Web Authentication Certificate not found (error). If you cannot access management interface via HTTPS please reconfigure Virtual Interface.
License Agent: ok
(Cisco Controller)
Welcome to the Cisco Wizard Configuration Tool
Use the '-' character to backup
Would you like to terminate autoinstall? [yes]: -
Invalid response
Would you like to terminate autoinstall? [yes]: no
System Name [Cisco_bf:dd:c4] (31 characters max):
AUTO-INSTALL: process terminated -- no configuration loaded
Enter Administrative User Name (24 characters max): admin
Enter Administrative Password (3 to 24 characters): ********
Re-enter Administrative Password : ********
Service Interface IP Address Configuration [static][DHCP]: none
Service Interface IP Address: 1.1.1.1
Service Interface Netmask: 255.255.255.0
Enable Link Aggregation (LAG) [yes][NO]: no
Management Interface IP Address: 192.168.10.1
Management Interface Netmask: 255.255.255.0
Management Interface Default Router: 192.168.10.10
Error in setting management interface IP
Management Interface IP Address: 10.10.10.1
Management Interface Netmask: 255.255.255.0
Management Interface Default Router: 10.10.10.100
Error in setting management interface IP
Management Interface IP Address:
Does anyone faced this issue?
Thanks.

Hi,
Try these:
1. With the WLC, Please set flow control(in SecureCRT or hperterminal) to none. Once the changes are made, CLI will start working as usual.
2. Another common reason can be related to the virtual interface configuration of the controller. In order to resolve this problem, remove the virtual interface and then re-generate it with this command:
WLC>config interface address virtual 1.1.1.1
Then, reboot the controller. After the controller is rebooted, re-generate the webauth certificate locally on the controller with this command:
WLC>config certificate generate webauth
In the output of this command, you should see this message: Web Authentication certificate has been generated.
Now, you should be able to access the secure web mode of the controller upon reboot.
3. Try to use some diff IP address for service interface don't use 1.1.1.1.
Regards
Dont forget to rate helpful posts

Help, I accidentally deleted the parent tab set.

I accidentally deleted the parent tab set from my application, and cannot find anyway to create a new one. Has anyone had this problem?
Oracle - 9.04R2
ApEx - 2.2.0
Browser - Firefox
Thanks,
Michelle

Hi Scott,
unfortunately I made a stupid thing, being too smart and updating the FLOWS_020200.wwv_SOMETHING_tabs record, modifying parent tab of the problematic tab to main. Doing that caused the complete application to disappear from the Application builder. I guess some checksums in APEX internal objects were modified and that is the result.
Fortunately I had a recent export of an application, so I didn't loose too much. That also means that I can not help myself with "as of" export.
Could you please just tell if recreating parent tabs is possible by "clicking through apex screens" or should there be some hacking used.
Zober

Problem: Two Tab Sets for one page

Hello everyone. I have two tab sets and each tab set has one common tab, for example an "About" tab that redirects the user to page 25 when clicked. The tab set works perfectly for the first tab set but when I'm in the second tab set and I click "About" the other tabs change to the first tab set.
Does anyone know how to solve this problem without having to create multiple "About" pages?

Hi Nithya,
My requirement is to have two main windows in the same page. For each line item it is triggering a new page. In the first page both the windows are displayed as expected but in the second page only the first main window (MAIN00) is getting triggered and the second main window (MAIN01) is not triggered.
Output got :
page1:
MAIN00
a
MAIN01
a
page2:
MAIN00
b
MAIN01
(blank)
Expected output:
page1:
MAIN00
a
MAIN01
a
page2:
MAIN00
b
MAIN01
b

Tab Set Label Colors - How do I change the selected tab label color?

No matter what color I tell it to use for the Labels - Selected color I get white. Is this a known bug in the system or am I not doing something correct. I have a tab set component and a label based menu selector component on my display. I've set up the labels and backgrounds for both components exactly the same but I can only get white for the selected tab set label.
Edited by: Maureen LaComb on Feb 19, 2009 5:38 PM

Hi, Maureen
You can set the color of Tab Set by using the Following Steps.
--> Select the Tab Set
--> From the the Properties Window
--> Select Appearance
--> There are Two Tabs "Text" and "Color"
--> From the Color Tab you can Select the Background Color
--> Tab BackGrounds Or Labels from here you can select the color.
But this setting will Apply to all the Tabs in a Tab Set, I think you can't set the Specific Setting for a single Tab in a Tab Set.
Please Reply if any Issue,
Kind Regards,
Faisal

Tab set Managment

Similar Messages

Maybe you are looking for