Tab Set

Is my understanding correct that to use the Tab Set feature one page must be created for each tab required? And each page must have a tab set on it in the same position as the others?
How would this work if I only wanted a portion of the page given over to the tab set? Would I have to repeat the content outside the tab set on each page used by the tab set?
I have an implementation of a tabbed set using Tomahawk and, I beleive, when a tab is selected a full page refresh is not required. Within the jsp code I can define the html controls that appear on each tab and do not have to create new jsps. Is this functionality available with Creator?
Andrew

Having followed the example I have noticed that the content of the first tab (Page1.jsp) is never re-displayed after visiting another tab and attemtpting to return ot the first tab again.

Similar Messages

  • How can I create a new standard tab set?

    I have a tab set right now with one tab in it. How can I create a new tab set in an existing page with different tabs in it? Thanks.....

    Hi,
    Refer:
    http://proskudin.blogspot.com/2007/06/two-level-tabs.html
    Regards,
    Kartik Patel
    http://patelkartik.blogspot.com/
    http://apex.oracle.com/pls/apex/f?p=9904351712:1

  • Export to Word loses tab setting

    Post Author: HmCody
    CA Forum: .NET
    I am very new to Crystal Reports with VS.net and have run into a problem that I hope isn't a bug.
    I am creating a report that needs to be able to be exported to Word (it gets sent to the printer for inclusion in a program).  Several of the text objects are formatted with right tabs set at the right edge of the object.  Everything lines up perfectly when the report is viewed in the Report viewer and when I export to a pdf, but when I export to Word the right tabs are converted to left tabs and the text aligned to them is out of view.
    Anyone have a clue as to why this is happening and if there is a way to fix it?
    Thanks for your help.
    Helenmary

    Sorry - no pointers. Other than patience - this is a known issue, probably to be addressed in Service Pack 3 of Crystal reports. See Kb [1643979 - Crystal Reports for Visual Studio 2010 does not look for ForceLargerFonts registry key|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633343333333933373339%7D.do]
    I have seen one or two reports of people using the below KBase with success (you'll have to modify the reg key to reflect CRVS2010). But most have no success. Testing this I did not have any success either, nor did I see the CRVS2010 engine looking for any of the keys noted in the KB....
    [1644563 - How to create the ForceLargerFonts registry key when using Crystal Reports 2008 (12.x)|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633343334333533363333%7D.do]
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
    Edited by: Ludek Uher on Jan 19, 2012 6:37 AM

  • Ignore Tab-Setting in a JTextPane

    Hello,
    i have a JTextPane and I need a Tab Size 0. I want to ignore the Tab-Setting, cuz I got an XML-Editor, with automaticaly indent.
    Does anyone Have an Idea ?

    This thread might help:
    http://forum.java.sun.com/thread.jsp?forum=57&thread=331679

  • Help, I accidentally deleted the parent tab set.

    I accidentally deleted the parent tab set from my application, and cannot find anyway to create a new one. Has anyone had this problem?
    Oracle - 9.04R2
    ApEx - 2.2.0
    Browser - Firefox
    Thanks,
    Michelle

    Hi Scott,
    unfortunately I made a stupid thing, being too smart and updating the FLOWS_020200.wwv_SOMETHING_tabs record, modifying parent tab of the problematic tab to main. Doing that caused the complete application to disappear from the Application builder. I guess some checksums in APEX internal objects were modified and that is the result.
    Fortunately I had a recent export of an application, so I didn't loose too much. That also means that I can not help myself with "as of" export.
    Could you please just tell if recreating parent tabs is possible by "clicking through apex screens" or should there be some hacking used.
    Zober

  • Problem: Two Tab Sets for one page

    Hello everyone. I have two tab sets and each tab set has one common tab, for example an "About" tab that redirects the user to page 25 when clicked. The tab set works perfectly for the first tab set but when I'm in the second tab set and I click "About" the other tabs change to the first tab set.
    Does anyone know how to solve this problem without having to create multiple "About" pages?

    Hi Nithya,
    My requirement is to have two main windows in the same page. For each line item it is triggering a new page. In the first page both the windows are displayed as expected but in the second page only the first main window (MAIN00) is getting triggered and the second main window (MAIN01) is not triggered.
    Output got :
    page1:
    MAIN00
    a
    MAIN01
    a
    page2:
    MAIN00
    b
    MAIN01
    (blank)
    Expected output:
    page1:
    MAIN00
    a
    MAIN01
    a
    page2:
    MAIN00
    b
    MAIN01
    b

  • Tab Set Label Colors - How do I change the selected tab label color?

    No matter what color I tell it to use for the Labels - Selected color I get white.  Is this a known bug in the system or am I not doing something correct.  I have a tab set component and a label based menu selector component on my display.  I've set up the labels and backgrounds for both components exactly the same but I can only get white for the selected tab set label.
    Edited by: Maureen LaComb on Feb 19, 2009 5:38 PM

    Hi, Maureen
    You can set the color of Tab Set by using the Following Steps.
    --> Select the Tab Set
    --> From the the Properties Window
    --> Select Appearance
    --> There are Two Tabs "Text" and "Color"
    --> From the Color Tab you can Select the Background Color
    --> Tab BackGrounds Or Labels from here you can select the color.
    But this setting will Apply to all the Tabs in a Tab Set, I think you can't set the Specific Setting for a single Tab in a Tab Set.
    Please Reply if any Issue,
    Kind Regards,
    Faisal

  • Display the panel container when user select the specific tab in a tab set

    Hi SAP Experts,
    I've faced some problems and i would like to seek some help from the experts.
    Basically, my requirement is to display the component "panel container" which contains some data whenever a user select e.g. Tab "A" of my component Tab set. Similarly, it hides again when the user select Tab "B" and another panel container appear for it.
    I am not sure if this is achievable in Xcelsius. Experts, please advise me.
    Your help will be greatly appreciated!
    Thanks a lot!
    Feel free to clear any doubts with me
    Best regards,
    htoh

    actually, you can not do that, since you dont have a reference of the current selected tab

  • Tab set font color

    I just downloaded the fix pack and have noticed that I am still unable to change the tab set tab font color.  Am I doing anything wrong?'
    Thanks,
    DD

    I believe what Purnima was speaking of was the Tab Background color properties.
    However, I believe there is an issue with the Label Over Color and Label Selected Color mapping properties of the Tab Set.
    Thanks.

  • Insert new tab at front of Tab Set Container

    In Xcelsius 2008, I have an existing Tab Set Container with four tabs.
    Based on user feedback, I need to add an additional tab at the front/first position of the previously created tabs.  I can click on the first existing tab and insert, but the "new" tab is in the "second" position and I cannot seem to move it.
    Is there a capability I'm missing that allows me to order the tabs in the Tab Set or re-order to my custom preferences? 
    Or am I going to have to start from scratch? 

    Hi Brent,
    To get the new tab added on the first position, add the tab as you are doing.
    Then go to the object browser,expand the TAB SET.
    Select the tab which you want to set on first or any position and then use the "UP/DOWN-Arrow mark" present at the bottom of the Object browser window.
    This will enable you to move the tab to any location you want.
    Thanks,
    Amit Mathur.
    Edited by: Amit Mathur on Dec 30, 2008 9:05 PM

  • Can't grasp the relation between tab set, parent tab, standard tab set and standard tab

    Very novice to apex application building, but after trying to figure the concepts behind the tab sets I'm getting more and more confused about it as I always get different behaviour when changing things.
    The documentation is not very clear on this.
    Is there someone who can explain this in a comprehensive way?
    It would be nice to have a view on the consequences of using these different levels of groupings.
    Any help will be dearly appreciated ;-)

    Jan
    One level tab application
    Tabsets are used to group standard tabs.
    Use full when splitting up the application in different sections. Much like how the apex is split up in the application builder, sql workshop, team developend and administration.
    Parent tabs aren't used. And a one level tab application can't be turned into a two level tab application.
    Two level tab application
    Parent tabs belong to only one tabset "main".
    The standard tabset is the connection between the parent tab and standerd tab.
    There is one standard tabset for every parent tab.
    The standard tabset in the two level application has the same function as the tabset in the one level application.
    The standard tabset also determines when a parent tab is current.
    When on the page the setting Standard Tab Set is set then the parent tab belonging to that standard tabset is current.
    This means that if you change a page form one parent tab to an other you not only need to change the tab settings. But also the settings on the page.
    If you still in the position to choose between list or tabs as your main form of navigation I would recommend using lists.
    The possibilities with the list templates are greater that with tabs.
    Tabs have a maximum of two levels. List don't have such a limit.
    If you created your application as a one level tab application you can't turn it in a second level application without some serious hacking.
    Clicking on a standard tab submits the page and branch after the computations. This could also be viewed as a pro for tabs because with list navigation your page needs to be accessible by url. Did isn't necessary with standard tabs making them more secure. Parent tabs also use an url to navigate.
    Only the standard tabs belonging to the current standard tabset are rendered making a drop down menu impossible.
    Hope this clears up some of your questions.
    Nicolette

  • Tab Set error - ORA-00928

    Hi,
    I have a strange error can anyone decipher this one - When I edit a page and change the "standard tab set" to a particular tab set I get the following error message when running the page.
    "Invalid exists/not exists condition: ORA-00928: missing SELECT keyword "
    When I run the page with no tab-set there is no error.
    Thanks in advance,
    Brandon

    Hi,
    I have a strange error can anyone decipher this one - When I edit a page and change the "standard tab set" to a particular tab set I get the following error message when running the page.
    "Invalid exists/not exists condition: ORA-00928: missing SELECT keyword "
    When I run the page with no tab-set there is no error.
    Thanks in advance,
    Brandon

  • In OSX Safari, how do I drag a single open window to an existing tab set?

    In OSX Safari, how do I drag a single open window, without tabs, to an existing window with a tab set?
    I have an iMac 5K running Yosemite.

    Thanks, but I have multiple open tab sets and want to move a solo window to one of the windows with multiple tabs. It seems there must be a way to grab that solo and move it in with the tabs. My workaround is to add a tab to the solo window to create a tab that I can grab, but isn't there a "handle" for a solo window that is "grabbable"?

  • TextEdit Tab setting

    I write just about everything on TextEdit and have tons of documents. The problem I've been experiencing, starting back at some point but too busy to figure out what's going on, is that my TAB setting is changing while I'm typing. I'm an idiot as far as inner workings of anything... like cars.. computer etc etc. I just use it. I have no clue how to set the tab so it doesn't change on me from line to line. I need something like: "TAB SETTING HERE" or "Click here to LOCK your TAB SPACING" but I just don't see it.
    Right now it flips between slightly over 3/8" to 1/2" spacings. Sometimes some other weirdness goes on that I can't make rhyme or reason why it's doing what it's doing. It's kinda like spring loaded and I don't know when it gonna go off. All I want is the control so I can make it stop... or perhaps, I suppose, understanding of how it works. What am I doing wrong? I'm thinking pasting types etc from elsewhere is throwing the tab setting off? May be because I intermix bold types etc? I've no clue???
    Help please.

    I understand that part.
    What's happening is that TAB spacing of every 1/2" somehow changes amid typing to something like 13/32" spacing. I can see the arrows on the top ruler pointing to every 1/2" changing to every 13/32", eg the stuff that needs to be at 1 1/2" mark ends up at 1 7/32" and so on on the next line. Another words I can't lock the tab setting at every 1/2". I don't know what's causing the Tab spacing to change from every 1/2" to every 13/32"...??? How do I get around this problem? I want to be able to past text from other sources without causing havoc to my tab setting... ie if that is the cause of this problem.

  • Tab Setting in Code Style

    JDeveloper 11.1.1.3 (PS2)
    We're using a code style with
    -- Indentation Size = 4
    -- Use Tab Character = Checked
    -- Tab Size = 4
    Every time we restart JDeveloper, my documents appear to be reformatted with a tab setting of 2, although the code style still says it's 4. I can reformat the document by going into Code Style, and clearing the Tab Checkbox. I then have to go back in and recheck it. Can someone please take a look?
    Thanks,
    Tom

    There appear to be bugs filed for this and related issues already (c.f. bug#9793235). They are marked as fixed in 11.1.2 or 11.1.1.4 (depending on the bug) - I guess you could file an SR and ask for a backport to 11.1.1.3
    John

Maybe you are looking for