Tab setting in the main window sapscript table

Hi ,
i have one problem ,i am doveloping new script.in the main window having 5 column table .the table col size is grater than the populated field size.main problem is these values are not populated in the middle of the every column of the table.
to achive this how to set the tabsettings?
please sent the solution for this asap.
Thanking u.

Hi SS,
U can do that by giving the alignment (Right,Left,Center Alignment) in the Pragraph format and also in Character format.......
any of the format you can choose....
as for as tab is concern you must have the size of the value which you want to populate...
accordingly you have to give the tab size in paragraph format...
thnx
Rohit

Similar Messages

New links will not open in a tab, only in the main window

with firefox 21, links will not open a new tab, only in the main window. I have set the option for tab opening, but it still will not work

Did you installed ASK toolbar?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How do I get my tabs back into the main window?

I've had a problem with an add-on displaying a small extra window every time I open a session for some months now: I know you're supposed to try disabling and re-enabling every add-on you've got to find out which one is responsible, but this is a work computer and with all the add-ons I have, it would take too long, so I've just closed the extra window every time and got on with my work. However, for some reason today my forty-odd tabs have all opened in the small extra window, which has no tab bar, navigation bar or menu button. How do I get my tabs back into the main window of Firefox, or alternatively get that window to behave like a normal Firefox window so I can use it?

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

How to make the main window's table size fixed?

Hi all,
when i have a single line item, the size of table in main window is getting reduced. Its size is varying according to number of line items. Is not is possible to keep the size of table fixed even you have single line item?
Regards,
Bipen

Hi,
You need to create a dummy template of fixed size and do not use lines for the main window table use the template. this will overlap with the window height.
If you want tro display something then pass the field based on some condition on end of the table
Regards
Shiva

Tab canvas on the main window

I have placed some items of the block on the tab canvas but ID is on the content canvas. When the query is executed. the tab canvas only appears when the navigation is transfered to the first item in the tab canvas. I want that at runtime. The tab canvas should appear irrespective of the navigation.. Could somebody help me with that

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Bogdan Dincescu ([email protected]):
Use
go_item(item_on_your_tab_canvas);
Best of luck.<HR></BLOCKQUOTE>
Thanks a lot. u just gave me another idea too
null

Fixing the height of the maon area of a table in the main window in smartfo

hi all,
I have a requirement where I need to fix the height of the main area of a table in the main window in a smartform.

Hi,
If you need to fix the height of the main area of a table on a page.
Then use a loop node to loop the table with 1 to 6 rows and under the loop node make us of a template for displaying the fixed no of rows.
Regards,
Ram

2 different tables in the main window with same internal table data

Hi All,
can we have 2 diffterent tables with same internal table data into its work area in the main window.Is it possible or we will get any run time error.?
is it like having 2 nested loop with same internal table ?
ex : loop at itab1 into wa_itab.
loop at itab1 into wa_itab.
endloop.
endloop.
can we use like this?

Hi,
there will not be any error ...but what is the use of it...
do you need to have a controlled way of display ...of the data...
If so then you create another workarea in the global definitions of the same type and then use it...
Regards,
Ram

Setting default size for the information area in the main window

Hi, I wonder if there is any way to change the default size of the information area in the main window (lower left corner). I want it a little bigger because I had some useful information set there and I had to change the size every time I log in.
Thanks in advance.

That part of the interface doesn't have an exposed preference to control.
One thing you could do is reorder your metadata fields within the info pane so the most important are listed first and always visible.

Can I set the time ruler in the main window to minutes/seconds/milliseconds?

Is there a way to set the time ruler in the MAIN window to minutes/seconds/milliseconds?
It seems that the only ruler time display option is minutes/seconds/frames/subframes.
Or, failing that, is there a way to suppress the display of frames/subframes?
I have already figured out how to set the main ruler to time, and the LCD to minutes/seconds/milliseconds…it's just a matter of having that in the ruler as well.
Thanks.

To my surprise that is not possible. Although, surprise...
You could put in a feature request here:
http://www.apple.com/feedback/logic-pro.html
and/or here:
http://www.logicprohelp.com/forum/viewforum.php?f=41

SAPScript: Positioning a Window (Graphic) behind the main window

Hello,
I want to print a graphic behind the main window. But I am not able positioning a window or graphic-window behind the main window. The result is that my graphic always shows up in front of the printed text of the main window and not behind the text of the main window, as I wish. I thought that the order of the windows determines which windows is on top? But I am not able of putting a window before the 'MAIN' design window.
Regards, Lars.

Hi Lars
Please check the following thread:
ABAP Development
/: BITMAP MYLOGO OBJECT GRAPHICS ID BMAP TYPE BMON
I think, trick must be in 'TYPE'.
Try to explore what options you can have (here it is BMON). I will also try.
Regards
Ashish Jain

How to find remaining space left in the main window

Hi Guys,
In one of the smartform there is a MAIN WINDOW, in which a table will be displayed with 3 or 4 entries for each material. ( so that atleast 3 tables are displyed on a single sheet)
Some times if the space is not enough in the main window to display the contents of the table, the contents will be displayed in the next page. (Eg - 1 entry at the end of the page with the header at the end of the page and remaining entries int he next page with the header, which is satisfying the client's requirement)
Problem is some times only header gets displayed at the end(end of the main windw), but so space is avaliable to display the contents, so the contents will be displayed in the next page with the header again,
so the end user will be seeing a header at the end of the page with no contents,
Is there any way to solve this(Not to dislay the header if the contents of the table cannot be displyed)
Is there a way to find the remaining space in the main window dynamically so that if i am able to find the remaining space is JUST 1 LINE ( or CM or INCHES), then I can put a condition for not displaying the header).
Regards,
Naveen.

Hi,
In smartforms, there is no other way to find the remaining height of the main window on a page.
Hence, another way to solve this is to restrict the contents of the table with templates designed such a way that if there is header and items then display exactly a set of rows which would fit clearly on a page.
Also make the folder as page protected.
This is tedious but there is no other way i think as we also faced similar kind of issue.
Regards,
Ram

How to print items in the MAIN window of the NEXT page (smartform)?

Dear forumers,
There are two pages (FIRST and NEXT) in my smartform with the same MAIN windows in each of the pages. Whatever that are changed in FIRST-MAIN window will also be seen in NEXT-MAIN window.
I will need to control the printing of table TABLE3 contents (already contained in the MAIN window) such that if a variable V_MAT_PRINT is 'X', the TABLE3 contents will only be printed in NEXT page and not printed in FIRST page at all.
How may I achieve this? Please help.
Thank you.

>
Mohammed Ahasanullah Mulla wrote:
> Hi Deborah,
>
> I had also faced a similar situation,in my case it was three pages..However i will try to tell you for 2 pages..After the second table .Add a program lines and force a page break only if V_MAT_PRINT is 'X'. After the program lines add a command and make the go to new page as second page.This will solve your problem.I have done the same and its working fine .If you have any questions do ask.
>
> Thanks,
> Ahsan
Hi Ahsan,
Here's my case.
If V_MAT_PRINT is 'X', print the following:-
FIRST page, MAIN window
- TABLE1
- TABLE2
- TABLE4
- TABLE5
NEXT page, MAIN window
- TABLE3
If V_MAT_PRINT is not 'X', print the following (no additional controls / changes are needed, everything remains unchanged):-
MAIN window
- TABLE1
- TABLE2
- TABLE3
- TABLE4
- TABLE5
In this case, is a page break suitable? I doubt it as TABLE4 and TABLE5 will still need to be printed back on the FIRST page regardless of the V_MAT_PRINT value.
Please advise further. Thanks.

Ipod nano 6G. Where is Nike + iPod tab appears in the iTunes window?

I read manual at page 39.
Upload your steps or workout information to Nike+:
1 Connect iPod nano to your computer and open iTunes.
2 Click Send in the dialog that appears, and then follow the onscreen instructions to set up your Nike+ account. Once you set up your account, a Nike + iPod tab appears in the iTunes window.
3 Click the Nike + iPod tab, and then select “Automatically send workout data to Nike+” if it isn’t selected already.
4 Click Apply.
To view and share your information on the Nike website, click Visit Nike+ in the Nike + iPod pane when iPod nano is connected to your computer, or go to www.nikeplus.com and log in to your account.
But, I dont watch this tab in my iTunes. Windows 8.1, iTunes 12.1.1.4 64 bit.

I install iTunes 10.7.0.21 at another computer and I watch tab Nike+iPod.
Is iTunes 12.1.1.4 not compatible with ipod nano 6G ?

Print material po text in the main window of pur. order

Hi experts,
Here is my issue regarding MATERIAL PO TEXT in smartform of purchase order:
                      I want to get the material po text in the material description field itself or beside to this column in the mainwindow only in the print of purchase order
so please let me know how to read the material po text to a internal tab field.
very glad for ur replys
TNQs n REGARDS
mahathma

Hi    TNQs for ur responce.
i want to get the item text in the main window beside to material description column .
i think u got my point actually we'll have item texts for each item , i want to get the text of each item in that row only
i used include text and i gave following attributes
Text Object :      EKPO
Text ID         : A03
Language     :     EN
just tell me ,should i need to give any code for this.
thanks and regards,

Box in main window (sapscript) problem.

Hi, all.
I meet a weird problem....
I have 2 pages form which have 2 same MAIN window and of course their source code is same one. But when I run the output form, I found that one of the page which main window's box is disappear, while the other page no problem.
How come like this? Should be the box appear in both MAIN window, right? Hope someone can guide me.
Thanks in advance.

Boxes in the main window only get printed in the first page, unless you include them in an element and explicitly call the, But of course that's not the way to go.
Every other window in the same page which has content that's not inside one element gets printed every page. So to solve your problem, declare another window (perhaps called BOXES) with the appropiate dimmensions and define in it the boxes you need. Replicate this BOXES in the other pages (if you use different page formats inside the sapscript) or leave it in the First page (if it's the only one in the sapscript). The boxes will now print in every page.

Tab setting in the main window sapscript table

Similar Messages

Maybe you are looking for