Tab strip looks distorted in SAP CE 7.3
Hi All,
We recently upgraded our Portal from 7.01 to 7.3 and transported the custom theme also.
But have one problem when ever we come across any tab strip. say for e.g. UWL iView or under user administration the tabs get shrinked and shows up in distorted form.
Did anyone face this issue before kindly help me.
One observation is when we use the standard default framework instead of the custom one the tabs are working fine.
regards,
Sai Sharan
Hi Kumar
We have implemented ECommerce 7.3 version but we are facing some API issues which have deprecated with JDK1.6 version.
if you face the same please let me know or if you find a solution it would be really great
Regards
Sonal
Similar Messages
-
User changes in tab strip ui element are not recorded in context change log
Hi All,
We are using a tab strip ui element in webdynpro component. But user changes inside tab strip ui element are not getting recorded to the context change log. I have an input field on the same view besides tab strip ui element. User changes to this input field are getting recorded to the context change log.
Is there any restriction on context change log usage with tab strip ui element?
Could you please suggest If there is any way to record changes inside tab strip ui element.
Thanks,
Sudheer.I think there are some limitations exists, context change logs are not complete when you do value help , i am not sure about tab strip.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm] -
In Windows Vista, FF 7.0.1, I selected the Tab Group button to try it out. However, when I selected the Tab Group button again to close that view, the New Tab button in the Tab Strip no longer appears. I'm requesting help to restore the New Tab button (has the "+" sign on it) on the Tab Strip just to the right of the currently open tabs.
You can find the New Tab button showing as a '+' on the Tab bar.
You can open the Customize window and drag the New Tab button that shows as a plus sign (+) from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
If you can't find the New Tab button then click the "Restore Default Set" button in the Customize window.
If you want the New Tab button at the far right end of the Tab bar then place a flexible space to the left of it. -
Looking to eliminate tab strip
Hi,
I do not use and do not care for tabs.
I am using Firefox 4.0 on a Mac (OS X 10.5.8) and I understand that the tab strip cannot be hidden.
Is there a plugin or add-on that will let me either hide or eliminate the strip?
Thanks
AMIf you have only open one tab then this should hide the tab bar:
*Firefox > Preferences > Tabs: [ ] "Always show the tab bar" -
Hi
I am new in SAP CRM 2007. I am developing a new component. I want to use the element htmlb/xhtmlb TAB STRIP, but when I use this in my view, a javascrip error occurs (object expected) and Tabs are not shown.
I dont know if I need a label or anything else...
My code is
<xhtmlb:tabStrip id = "ts3"
<xhtmlb:tabStripItem title = "Tab N 1"
name = "ti1" >
Test1
</xhtmlb:tabStripItem>
<xhtmlb:tabStripItem title = "Tab N 2"
name = "ti2" >
Test2
</xhtmlb:tabStripItem>
<xhtmlb:tabStripItem title = "Tab N 3"
tooltip = "Tooltip for Test 3"
name = "ti3" >
Test3
</xhtmlb:tabStripItem>
<xhtmlb:tabStripItem title = "Tab 4"
tooltip = "Tooltip for Test 4"
name = "ti4" >
Test4
</xhtmlb:tabStripItem>
</xhtmlb:tabStrip>
Thank you for help me.Hi,
I was also trying to find the same tab strips but could not find relevent material. So used substitute solution. I created buttons seperated by '|'. My screen looks some what like this.
View
Button1 | Button2 | Button 3| Button 4
Field 1
Field 2
Field 3
Now when i click on button 1 i called even and from event to outbound plug which navigate me to view 1. Similarly click on button 2 helps me to navigate to view 2 and similarly button 3 and 4 to view 3 and 4 respectively. It works like tab strips but not same as it..
Best regards
Pankaj Kumar
Edited by: Pankaj Kumar on Nov 14, 2008 7:00 PM -
Tab Strip with multiple views refresh issue
I have created a tab strip with two tabs. Each tab has a view container element. Each view has an iFrame which points to an ABAP report exposed as a web service (url). I put a refresh button on the first view which fires an outbound plug which is directed to the same view. This refreshes the first view just fine. However, it also refreshes the second view. I don't want to refresh the second view. Is there a way around this?
Hello Kenneth,
i would try another way and use [Suspend&Resume|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/19bf8c16f25d7ae10000000a11466f/content.htm]. But that works only on component-level. So i would create 3 components A,B,C.
Comp A has a tabstrip and inside each tab a ViewContainer Element (VCUI). Inside the VCUI's you call (the used) components B and C using Suspend & Resume Plugs. Components B and C only have one view each with an iframe calling the specific report.
So you can refresh both components differently.
Kind regards, Andreas -
How to get active tab strip name using standard function ?
Dear all,
I have 5 Tab strip in my view, how can i know which tab strip is active during runtime ?
Best Regards
FernandHI
I hope you may be looking at this thread , hope its a similar requirement as yours
How to get the selected Tab from a TabStrip.
Thanks -
Number of Tab Strips in BSP pages of E-Recruitment
Hello,
We have a problem with number of tab strips visible per page in Job Interest Wizard page of E-Recruitment.
The default number of tabs are 5 per page.
In our case we put a large text in each tab (as per our business requirement), so these tabs extending beyond the page width and thus a horizontal scroll is appearing.
We do not want this horizontal scroll as some of the inputs fields with asteric () , the asteric () is not visible to the user unless he scroll the page to the right.
We wanted to either display only 4 tabs page or wrap the text if these tabs, so that all 5 tabs exactly fit in the screen.
I have no clue on which BSP application is handling these tabstrips for Job Interest Wizard.
Any suggestions is rewarded
Thanks in advance,
Regards
Raghu KolukuluriSomeone provided this answer to me with regards to number of tabs visible on a wizard;
The class that needs to be changed is CL_HRRCF_BSP_EXT_CONTAINERSEQ.
To modify the number of tabs shown (in addition to other parameters) you
can go to method GET_CS_ITEM and change the call to the factory method.
The code looks like this:
lo_cs ?= cl_phtmlb_containersequence=>factory(
collapsed = 'false'
collapsible = 'false'
design = 'transparent'
hascontentconnector = 'false'
hastitle = 'true'
id = lv_id
maxvisibleitems = '5'
scrollableitems = 'true'
selectedindex = controller->selected_index
showstepnumber = 'true'
titleselected = 'false'
items = lt_items ).
Maxvisibleitems is the number of tabs show at once. Showstepnumber
determines if the tabs are numbered. Setting this to false may save some
space.
Hope this helps
Sandra -
My "Open a new tab" button (the +) does not appear at the end of the tab strip, it does not look like it is given in all photos here in the support page. It did not look like this before either. Now I have it at the most left end i.e. before the tabs begin. I can move it to the most right, but it sticks there. I want it to be attached to the last open tab, as it used to be, and as is shown in example Firefox photos.
Could be useful if I sent you a print screen, but I don't see an attachment option here.
Thanks!See https://bugzilla.mozilla.org/show_bug.cgi?id=574833 - Installing Persona theme completely covers the caption buttons
-
How to create a selection screen with two tab strips
Hi Experts,
I need to craete a selection screen '100' with two tab strips, in the 1st tab strip i need create some select options as subscreen and in other tabstrip i need to call the subscren '4000' of the program 'SAPLCTMS' . i need to call this screen as selection screen from the zprogram. please help me out.
Thanks in advance...
Sarath...JHi,
I have developed some code.
It just displays a table control and after entering the values init, upon hitting the return button, the values will be put into table itab. Have a look and make necessary changes as you see fit.
*& Report ZMADHU_TBCNTL
REPORT zmadhu_tbcntl.
DATA: BEGIN OF itab OCCURS 0,
sel TYPE s_flag,
matnr TYPE matnr,
ersda TYPE ersda,
ernam TYPE ernam,
END OF itab.
CONTROLS: tab_cntl TYPE TABLEVIEW USING SCREEN 100.
*START-OF-SELECTION.
CALL SCREEN 100.
*END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'TABCNTL'. "pf status
SET TITLEBAR 'xxx'.
CASE sy-ucomm.
WHEN 'BACK' OR
'CANCEL' OR
'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module ITAB_MODIFY INPUT
text
MODULE itab_modify INPUT.
CASE sy-ucomm .
WHEN ' '. " When pressed enter
if itab-sel = 'X'.
MODIFY itab INDEX tab_cntl-current_line.
APPEND itab. " append lines to internal table
CLEAR itab.
*endif.
ENDCASE.
ENDMODULE. " ITAB_MODIFY INPUT
*Screen 100 flow logic.
PROCESS BEFORE OUTPUT.
MODULE status_0100.
LOOP AT itab WITH CONTROL tab_cntl CURSOR
tab_cntl-current_line..
ENDLOOP.
PROCESS AFTER INPUT.
MODULE select_data.
LOOP .
CHAIN.
FIELD itab-matnr.
FIELD itab-ersda.
FIELD itab-ernam.
MODULE itab_modify ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE USER_COMMAND_0100.
Hope it will helps to u.
Thanks,
Shankar -
New tab strip for PO header data
Hello,
for a customer project there is the need to add a new customer individual tab strip to PO and contract header data. Is there an User Exit or any other predefined way to do this in a most efficient way with minimum changes in SAP standard?
Regards
NorbertHi Norbert,
You can add th new custom tab to the PO and contract header data using the below mentioned Enhancement.
Enhancement MM06E005
Short text Customer fields in purchasing document
Create a project in the Tcode CMOD and assign the above mentioned enhancement.
Add new fields in include structure CI_EKKODB.
Design your screen for the new fields in SAPLXM06 0101.
Put your logic in the corresponding function module exit as provided in the enhancement.
Regards
Dillip -
Tab strip - dialogue programming
Hi all,
I want to make an dialogue program application which is similar to transaction code pp01. It would have two or three dropdown list boxes. Depending on what options I choose in the list box, certain options will come in the table below ( please refer to pp01).
Now when i click on any of these options to choose it and then click on create button, it should open the corresponding infotype which I already created separately using transaction pm01 - to input entries in that infotype.
When I click on display button, it should display the infotype record if it has been already created - just like pa30.
I knoow how to create list boxes. But depending on the choices in these list boxes , in the tab strip below - on the first screen - should come some values , which will change when i change the listbox options.
can you pls help me in this? My concern is not the list boxes but the action corresponding to list box choices I make and the tabstrip in transaction pp01. how to create it and how to add funcrtionality to the tab strip so it will open my required infotype in display or edit mode.
Please suggest something in this.
Thanks
RibhuHi,
Following links will be helpful:
http://help.sap.com/saphelp_46c/helpdata/en/d1/801bd2454211d189710000e8322d00/frameset.htm
Tabstrip Control
TabStrip ViewSet example
http://help.sap.com/saphelp_bw30b/helpdata/en/04/10f2469e0811d1b4700000e8a52bed/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap-code-samples/alv-grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Also you can try these sample programs:
try these sample programs in the system
demo_dynpro_tabstrip_local
demo_dynpro_tabstrip_server
Raja T
Message was edited by:
Raja T -
Hi,
I have 4 tabs in data container, each tab associated with different event. Whenever i click on a tab , i want to display some data on top of the tab as dispaly only. what is the better approach?
I am thinking to create 4 web dynpro views and based on the selected tab, i will show that perticular view or is there any efficient way to do this instead o creating 4 web dynpro views , can i create one and flip te data based on selected event?
Please write the detailed steps to achieve the above task?
Thanks
SriHi Sri,
Instead of creating 4 views, try to use 4 different transparent containers. Place the in corresponding containers. Create 4 different context attributes of the type com.sap.tc.webdynpro.progmodel.api.WDVisibility.
Procedure:
Click on "..." button in the properties of the context attribute. Select Local Dictionary -> Expand uielementdefinitions -> Select WDVisibility.
After binding each context attributesto the corresponding visibility property of the transparent containers.
Use this code to change the visibility in Tab strip event handler.
If (selectedTab.EqualsIgonreCase("Tab1") )
wdContext.currentContextElement().set<conatiner1Vis>(WDVisibility.VISIBLE);
wdContext.currentContextElement().set<conatiner2Vis>(WDVisibility.NONE);
wdContext.currentContextElement().set<conatiner3Vis>(WDVisibility.NONE);
wdContext.currentContextElement().set<conatiner4Vis>(WDVisibility.NONE);
else if (selectedTab.EqualsIgonreCase("Tab2") )
Feel free to revert in case of any issues.
Regards,
Siva -
Hello,
I have a Tab Strip.I am creating it using the tabstrip wizard.
I have a field on the first screen and tabstrip in the second screen.
Depending on the value in the parameter in the first screen,
i want the corresponding tab to be pressed and shown when the second screen is entered.
How can this be achieveds??Its not working!!
This is my code.........
TB_STRIP1-ACTIVETAB = G_TB_STRIP1-PRESSED_TAB.
CASE G_TB_STRIP1-PRESSED_TAB.
WHEN C_TB_STRIP1-TAB1.
G_TB_STRIP1-SUBSCREEN = '0201'.
WHEN C_TB_STRIP1-TAB2.
G_TB_STRIP1-SUBSCREEN = '0202'.
WHEN C_TB_STRIP1-TAB3.
G_TB_STRIP1-SUBSCREEN = '0203'.
WHEN C_TB_STRIP1-TAB4.
G_TB_STRIP1-SUBSCREEN = '0204'.
WHEN C_TB_STRIP1-TAB5.
G_TB_STRIP1-SUBSCREEN = '0205'.
WHEN C_TB_STRIP1-TAB6.
G_TB_STRIP1-SUBSCREEN = '0206'.
WHEN C_TB_STRIP1-TAB7.
G_TB_STRIP1-SUBSCREEN = '0207'.
WHEN OTHERS.
*&SPWIZARD: DO NOTHING
ENDCASE.
G_TB_STRIP1-PRESSED_TAB = TB_STRIP1-ACTIVETAB.
IF MDTB-DELKZ <> ' '.
IF MDTB-DELKZ = 'PA'.
TB_STRIP1-ACTIVETAB = 'TB_STRIP1-TB_STRIP1_TAB7'.
ENDIF.
ENDIF.
could u look into it. -
hi ,
can any one tell me the procedure to create tab strip wizard?
urgent.
with warm regards,
khadar.http://help.sap.com/saphelp_47x200/helpdata/en/04/10f2469e0811d1b4700000e8a52bed/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/022ba607-0301-0010-e382-fdedca553f5f
required tabstrip and subscreen program?
Regards,
Amit
Reward all helpful replies.
Maybe you are looking for
-
Oracle stored procedure is called OK but no values in output fields.
I have a working connection to my Oracle database using JDBC system. I can browse all my Stored Procedures. I can add them to my iview without errors. I can see all expected in and out fields. I can trigger the Stored Procedure through the input port
-
For the currency code ALE communication is not allowed
Hi, I am executing the transaction for - International Payment Medium Payment orders by EDI . On executing this t-code I am getting this error "For the currency code ALE communication is not allowed" . Please help me resolve this issue. Thanks. Hema
-
Where's the insert key on the new keyboards?
I'm using Maya right now and the insert key is used to adjust the pivot point of objects. However, I don't see an insert key on this here new keyboard.
-
CS4 & CS5 will not edit Home Page. All other pages edit fine.
Called tech support and they said to make this duplicate post, so I will. I am using CS4 Trial in XP 32 bit, and CS5 Trial in Vista 64-bit. Neither version will edit my home page. All other pages edit fine. http://www.audiofilesolutions.com. I ha
-
Hi, I'm new to the RAW format and am having trouble opening it up in Photoshop Element 9.0. I've downloaded Raw versions 6.3 but when I open a .CR2 file, the raw dialogue box does not open and the photo is automatically opened in Photoshop instead o