Tabbing between xcontrols
Dear all,
I need to tab between multiple XControl controls on my UI front panel.
The tab order has been set for each XControl on the front panel
The XControls are of the same type and only have a single numeric control in the facade.
Currently using the tab key just highlights the numeric control in the XControl facade and does not move the focus to the next XControl as specified by the tab order.
Is there any way to tab between XControls?
Thanks,
P
It might be behaving like a tab within a cluster. If you have a control selected in a cluster then tabbing will just cycle through controls in that cluster. You need to CTRL + Up Arrow or Down Arrow to go into or out of structures. I assume the XControl is behaving like that. You could try to do some fancy work detecting the tab button press, and then intercept it and press CTRL + Up, then CTRL + Tab if the keyfocus is in your XControl if this is the case.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Similar Messages
-
Text entry fields not able to tab between 2 fields
Hi there,
I have placed 2 text entry fields that are for username & a password, I on publish/preview, I type the username and go to hit the TAB key to move to the password field but nothing happens & cursor does not move to the other field...
I did try a quick search for this question as I thought it must of happened before to others, but could not find what I needed..the answer ;-)
Kind Regards
Rossco
DOH! I just found some more information on tabbing between these fields, so will check that out fisrt........must be Friday (over here)Hi There,
Welcome to Adobe Forum.
Have you tried using the shortcut option assigned as "Tab" in the action properties of the text entry box as shown in the following image:
Thanks
Loveesh -
I can no longer tab between cells in a table with pages 5.0.
I use pages everyday for filling in my work booking sheets. I need to have them synching to the cloud, so I can access the client information while on the road.
My booking sheet is basically a large table with many cells for name, address, phone number, etc. In pages 4.3 I could enter some information into the cell, hit the tab button, and it would go straight to the next cell in the table. This was a quick and easy way for me to fill out my forms on the computer.
Well, since the update, the tab button only moves the cursor over in the same cell, as opposed to the next cell. It is VERY rare to need to tab in a cell, as opposed to going to the next cell.
I did figure out that I could Option+ Tab to move to the next cell, but it is very hard to change my procedure of tabbing after all this timing doing it the other way.
Am I just missing a preferance to tab between cells, instead of inside a cell?
Thanks
DaveOption-tab makes sense and can be done with the left hand's thumb/forefinger.
Using tab was always arse-backwards as it defeated the use of tab within the table cell.
Best to use both for what they always do:
Option tab or an arrow key (singular) to jump cells
tab to jump to the next tab in the text wherever it is within or without cells.
The contrary precedence was set by Microsoft and was a bad idea. In good UI you do not have shortucts reverse roles such that you need to pay excessive attention to the context.
Peter -
I am using Firefox Nightly (30.a1, 2014-02-18, x64) on my laptop computer (Windows 8.1 Pro x64) and I was using Firefox Beta on my Nexus 5 (Android 4.4.2). Recently, Mozilla announced the new Firefox Accounts system (which is replacing the old Firefox Sync Account) and I created a Firefox Account for my laptop Nightly installation. Since the new Firefox Account doesn't work with the old Firefox Sync Account, I replaced my Android installation of Firefox Beta with Firefox Nightly and signed into Firefox Account on my Android. However, when I attempt to send a tab from my Android installation to my laptop installation using the "Share to Nightly" intent, Nightly asks me to set up a Sync account, which is impossible to complete in my laptop Nightly installation. I've tried replacing my Android Nightly installation with an Android Aurora installation, but the same problem occurs.
What's worse is that even with both my laptop and Android installations signed into the same Firefox Account, I cannot see any information being synced between the 2 installations. No history is being shared, and I cannot see the open tabs list from the other device. I cannot pass tabs between my phone and my laptop, which is something I used every week as I visited websites and read my RSS feeds on my phone. Does anyone know how to share tabs using the new Firefox Accounts? Does anyone know why Firefox Accounts does not seem to be syncing data between my 2 installations?Unfortunately with further investigation, Roland informed me that share tab was removed[https://bugzilla.mozilla.org/show_bug.cgi?id=965811]
-
I normally have several applications running at the same time, some of them are running 24/7/365.
When accessing the applications its easier to alt+tab between them. On the occasions that I can actually get Firefox to open and stay open it always freezes and remains immovable on the screen after switching to another program.
Firefox goes black except for the border and the close button at the top right. The other buttons disappear. Even after waiting for a period of time it does not clear.
The freeze can occur either on the first switch or second switch. However, it always happens.Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!
-
Command-tab between Safari and another application
When I command-tab between Safari and another application such as Word, when I return to Safari I am on a different web page. When I use History to return to the page I want, I have to sign back in again. How can I fix this?
It's CS4 6.0.3 on OSX.
The other application is a web app in development.
My guess now is Flash compiles the fonts and it sees Antihistory regular as Antihistory book and our website is expecting regular. -
Auto-tabbing between input text fields in AS3
Hello-
I am having some trouble figuring out how to work auto-tabbing between input text fields when a user inputs a character. I have a series of text boxes with maxChar set to 1, and when the user inputs a character, I would like it to auto-tab to the next one. I'm putting together a crossword-style banner ad so the auto-tabbing will help tremendously. All the input text fields are instanced on the stage as input1, input2, etc; not called in from a custom class. Also, I've been working with AS3 for about 2 weeks lol!
thanks!Awesome, thank you, that works nicely! Now I need to figure out how to capture individual keyCodes for each input and then come up with a conditional to check for right or wrong answers. I have a "check your answers" button all set up. I think I am almost there, possibly a syntax hiccup for me. Any advice on how to do that would be appreciated.
-
I have two text fields for entering numeric data and would like to touch the first and key in a number then hit the next key on the keyboard and go to the next text field to enter a number there also. As it is, when I type in the number on the first text field, i have "next" in the bottom right. When I touch "next" the keyboard disappears. If I go to the second text field and key in the number I have "done" in the bottom right that when touched makes the keyboard disappear.
Is it possible to set this up that after the number is keyed in the first text field I can touch next and it send me to the second text field? And, after keying the number in the second text field I can click "go" or something that will trigger the "calculate" button i've implemented?
I've searched for an hour and a half through all the developer section and didn't find anything other than "Enable Tabbing Between Text Fields" in a tutorial, but its for a desktop and not iphone.
Any advice is appreciated!-)
Also, is there a numeric keypad that can be called instead of the regular qwerty?
Thanks sooo much,
JazmynAnyone, please.
-
Shortcut for switching / tabbing between open documents?
Hi. In Mac OS in general, you can switch between open documents or windows in the same program via the shortcut COMMANDO + >. Like for instance different windows in Firefox. But in Numbers and Pages, this means zoom in or out.
Does anybody know a shortcut to switch / tab between the open documents in Numbers and Pages?
I have searched google, here and e-mailed for help and found nothing.
Thank you!Hello Jerry.
There ARE keyboards like that:
http://www.ergoblog.com/2006/09/keyboardwithe.html
http://www.sspdirect.com/large-letter-keyboard.html
You see, just google for "Large letter keyboard" and maybe add Mac. But ones without Mac symbols works just as fine, you just have to learn which key is which.
Seems there is no solution to my tilde-problem...
Thank you my french friend, for the understandning of the swedish problem
Regards,
Kip -
Why do I have to use the tab key even more to tab between page elements.
Firefox versions prior to ver 4 I used the tab key to tab between page elements (form elements, buttons, etc). I upgraded to ver 4 and now when I tab from form element to form element I first see a gray line outlining the element area and then another press of the tab the element becomes active for me to use. I now have to use double the tab keys to move between form elements.
Hello new_mac_user, see if the next works
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# in search field type (or copy/paste from here) '''accessibility.tabfocus'''
# double-click on it and change the value to '''4''' (probably you have 1 the default on mac)
# click ok, exit firefox and restart it.
with the above you give focus to links (and linked images) only when you press the tab key.
see for more info : http://kb.mozillazine.org/Accessibility.tabfocus
https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/Preference_reference/accessibility.tabfocus
thank you -
Tab between fields when editing song information
iTunes 10.4 removed the ability to tab between fields when editing song information. Is there another shortcut now?
Yes, I know EXACTLY what you mean. Actually the Tab sequence was reversed in 10.4. I'm upset that it took me until Septeber 2011 to figure it out. For the longest time, probably every release of iTunes. The Tab sequence went (Source-->Tab-->Search Music box-->Tab-->Tracks List)
Now it's the reverse and it's so annoying. I have both Mac and Windows and was able to downgrade my Windows iTunes to 10.3.x (though I had to downgrade to a previous iTunes Library.itl file. I cannot downgrade my Mac iTunes b/c it's my main library and I'd lose historic data by restoring and old iTunes Library.itl file
I've written to Apple about this several times the past few weeks but they've yet to address this. The latest version is 10.5 and it hasn't been restored. I WISH Apple would RESTORE this feature to its ORIGINAL design!!! -
Tab Between Text Boxes in Pages
Is there a way to tab between custom floating text boxes in a Custom Template? I've created a form, and don't want my users to have to click on each text box to enter the data.
Thank you.No, but…
If you can redesign your form to allow using a table to contain the entry boxes, you can use tab or return to move from one cell to the next.
Regards,
Barry -
Command-tab between Terminal windows
Hi, when I have multiple Terminal windows, I want to Command tab between these windows (like I can in Windows XP). However. the MacOS is treating the Terminal windows as one application. Anyone know how I can change this behaviour?
Windows XP ProIn Mac OS X, Command-Tab cycles only through applications. If you want to cycle through the open windows of a particular application, use the keystroke Command-`. This works for all applications that use multiple windows.
For clarity, the (`) key is just above the Tab key, i.e. the one where tilde (~) is the uppercase character. Just hold down the Command key and hit ` to cycle through open Terminal windows. -
Hi
In my application I want the user to be able to tab between components. The order should be as follows - tree, radio button, table, button. I have no problem going from tree to radio button to table, but once in the table if you keep pressing tab if just cycles through the rows.
I use the setNextFocusableComponent(component) method. Here is a snippet of my code :
tree.setNextFocusableComponent(radioButton);
radioButton.setNextFocusableComponent(table);
table.setNextFocusableComponent(button1);
Any suggestion on how to solve this problem are welcomed
Thanks
Bernie-wolfimport java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
public class Ex {
public static void main(String[] args) {
final JFrame f = new JFrame("Ex");
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
final JTable t = new JTable(10,10);
t.setSurrendersFocusOnKeystroke(true);
KeyStroke tab = KeyStroke.getKeyStroke(KeyEvent.VK_TAB, 0);
KeyStroke ctrl_tab = KeyStroke.getKeyStroke(KeyEvent.VK_TAB, InputEvent.CTRL_DOWN_MASK);
KeyStroke[] forward = {tab, ctrl_tab};
Set forward_set = new HashSet(Arrays.asList(forward));
t.setFocusTraversalKeys(KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, forward_set);
final DefaultCellEditor editor = (DefaultCellEditor) t.getCellEditor(0,0);
JTextField editorComp = (JTextField) editor.getComponent();
editorComp.setFocusTraversalKeys(KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, Collections.EMPTY_SET);
Action myTabAction = new AbstractAction("myTabAction") {
public void actionPerformed(ActionEvent evt) {
editor.stopCellEditing();
t.transferFocus();
editorComp.getInputMap().put(tab, myTabAction.getValue(Action.NAME));
editorComp.getActionMap().put(myTabAction.getValue(Action.NAME), myTabAction);
f.getContentPane().add(new JScrollPane(t));
f.getContentPane().add(new JButton("somewhere else for the focus to land"), BorderLayout.SOUTH);
f.setSize(400,300);
f.show();
}1. I always setSurrendersFocusOnKeystroke(true). Otherwise, the user starts typing, editing begins, but the text field doesn't get focus immediately: no cursor appears, and VK_LEFT and VK_RIGHT cause focus to go to the adjacent cells, instead of moving the cursor within the text field.
2. As the previous poster notes, JTable recognizes ctrl+tab as a request to move focus to the next component. Unfortunately, this doesn't work when editting a cell. I also have a beef with JTable: VK_LEFT and VK_RIGHT already let you traverse cells, why not let tab move focus to the next component?
3. Anyway, in my code above, I change the focus travesal keys so that tab works the way the OP wants it, assuming the table has focus.
4. What if the cell editor's text field has focus? Here my code is hacky, and I hope another poster can improve it. I add an action that (a) stops cell editing (this is what happens when you press enter), then (b) moves focus along. -
I want to tab between the textfields i have in a JApplet. Is there a listener i need to do this or something? I thought it did it on its own?
Look into Focus and FocusTraversal
Maybe you are looking for
-
I have not synced my iphone to my new computer. My old computer is dead. How do I keep the music from disappearing and get synced to the new computer?
-
Error downloading Mountain Lion
Hi all, I just bought the new imac (late 2012). I did a migration from a time machine backup and everything was ok. After that I changed my mind and tried to start with a fresh new installation of the Mountain Lion so I went to App Store. I tried to
-
Not responding - open a project in MSP pro 2010
I use MSP Pro 2010 with Project server 2010. When opening a project using "in Project Professional" option - it shows "Microsoft Project - Project1 (Not responding)", no error message and hangs. However, in PWA "Assignment details" and "Resource Summ
-
Creating Named Query: from OracleCallableStatement
We have a great many PL/SQL Procs in an existing legacy system that return PL/SQL Boolean, that we wish to call from toplink. Ideally we would like to create Toplink Nameded queries that wrap the SQL call statements. Does anyone know if its possible
-
What happens to the changes made to the standard OTR texts in E-recruitment
Hi all, I have to change the <b>OTR texts of e-recruitment</b>. But I doubt whether they remain changed or overwritten in upgrade if I directly change the OTR text itself. Any one please help me in this issue. If I want to keep the changes in upgrade