Table 30 of MM - Integration with FI

Hi,
I would appreciate if someone can explain this for me.
"When a goods issue is posted, it integrates via MM to FI through table 30 of MM.
This is one of the sample certification questions.

that is material doc, updation of stock value and qtyand inturn posting to g/l accounts(valuation)

Similar Messages

CRM Open Interface Tables for Integrating with CRM

HI all, We are evaluating integration with CRM from Telco Billing system. The TRMs of CRM talk about using some published open Interface table in CRM. I could not find any TRM or User manual where I can get this info.
Also need to know API for CRM for intregation. PL. reply to [email protected] . Thanks - Pradip

I think you also need V14496-01 Part 1 of 2 and V14496-01 Part 2 of 2 (English Language Extension Packs).
Installation is explained in the Bookshelf: V29095-01

ACS Express integration with Active Directory

Hello,
I have ACS Express version 5.0.1 installed on Cisco ADE; I'm trying to get it integreated with an Active Directory without sucess.
I did packet captures on the ASA that is in between and I can see communication going thru just fine. I ran a diagnostic on the ACS express and got this:
DIAGNOSTIC USING THE IP ADDRESS OF THE DOMAIN CONTROLLER:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Tabla normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Output of AD Domain Diagnostics:
IP Diagnostics
Local host name: he-zfm-acs-01
Local IP Address: 172.31.67.10
Not found in DNS!Make sure it is in Reverse Lookup Zone.
FQDN host name:he-zfm-acs-01.clarocr.americamovil.ca1
Domain Diagnostics:
Domain: 172.24.2.93
Subnet site:
WARNING! Unable to locate computer's subnet site in Active Directory.
Ask your Active Directory administrator to add this computer's subnet
to the appropriate site.
DNS query for: _ldap._tcp.172.24.2.93
Found no SRV records!
Computer Account Diagnostics
Not joined to any domain
AD Agent Process Status: Not joined to any domain
DIAGNOSTIC USING THE AD REALM:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Tabla normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Output of AD Domain Diagnostics:
IP Diagnostics
Local host name: he-zfm-acs-01
Local IP Address: 172.31.67.10
FQDN host name:he-zfm-acs-02.clarocr.americamovil.ca1
Domain Diagnostics:
Domain: CLAROCR.AMERICAMOVIL.CA1
Subnet site: TELECOM
DNS query for: _ldap._tcp.CLAROCR.AMERICAMOVIL.CA1
Found SRV records:
rom-pro-dc-03.clarocr.americamovil.ca1:389
Testing Active Directory connectivity:
Domain Controller: rom-pro-dc-03.clarocr.americamovil.ca1
ldap: 389/tcp - good
ldap: 389/udp - good
smb: 445/tcp - good
kdc: 88/tcp - good
kpasswd: 464/tcp - good
ntp: 123/udp - good
Domain Controller: rom-pro-dc-03.clarocr.americamovil.ca1:389
Domain controller type: Windows 2003
Domain Name: CLAROCR.AMERICAMOVIL.CA1
isGlobalCatalogReady: TRUE
domainFunctionality:
forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
Forest Name: AMERICAMOVIL.CA1
DNS query for: _gc._tcp.AMERICAMOVIL.CA1
Testing Active Directory connectivity:
Global Catalog: rom-des-dc-01.desa1sv.americamovil.ca1
gc: 3268/tcp - timeout
No TCP LDAP response, giving up on rom-des-dc-01.desa1sv.americamovil.ca1
Global Catalog: rom-amv-dc-02.americamovil.ca1
gc: 3268/tcp - good
Global Catalog: rom-tlc-dc-01.telecom.americamovil.ca1
gc: 3268/tcp - good
Global Catalog: rom-pro-dc-03.clarocr.americamovil.ca1
gc: 3268/tcp - good
Global Catalog: rom-tlc-dc-02.telecom.americamovil.ca1
gc: 3268/tcp - good
Global Catalog: rom-amv-dc-01.americamovil.ca1
gc: 3268/tcp - good
Domain Controller: rom-amv-dc-02.americamovil.ca1:3268
Domain controller type: Windows 2003
Domain Name: AMERICAMOVIL.CA1
isGlobalCatalogReady: TRUE
domainFunctionality:
forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
Domain Controller: rom-tlc-dc-01.telecom.americamovil.ca1:3268
Domain controller type: Windows 2003
Domain Name: TELECOM.AMERICAMOVIL.CA1
isGlobalCatalogReady: TRUE
domainFunctionality:
forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
Domain Controller: rom-pro-dc-03.clarocr.americamovil.ca1:3268
Domain controller type: Windows 2003
Domain Name: CLAROCR.AMERICAMOVIL.CA1
isGlobalCatalogReady: TRUE
domainFunctionality:
forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
Domain Controller: rom-tlc-dc-02.telecom.americamovil.ca1:3268
Domain controller type: Windows 2003
Domain Name: TELECOM.AMERICAMOVIL.CA1
isGlobalCatalogReady: TRUE
domainFunctionality:
forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
Domain Controller: rom-amv-dc-01.americamovil.ca1:3268
Domain controller type: Windows 2003
Domain Name: AMERICAMOVIL.CA1
isGlobalCatalogReady: TRUE
domainFunctionality:
forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
Forest Name: AMERICAMOVIL.CA1
Computer Account Diagnostics
Not joined to any domain
AD Agent Process Status: Not joined to any domain

Dennis,
TIme in sync on the ACS and AD servers?
Faisal

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

MS Word integration with SAP CRM: can a PDF be created from the MS Word doc

21/11
Gurus,
I know have a better understanding of the topic but still have 2 open questions.
I now know that StreamServe cannot read .DOC files but can read and work with .PDF files.
Since we are in a SAP forum and not a StreamServe forum,
1/ I am wondering if SAP CRM 2007 can convert the MS Word generated and populated documents into .PDF. Possibly immediatly.
2/ Can the MS Word generated and populated documents be saved by SAP CRM 2007 as .XML files?
Thanks again.
Dear All,
On my project, there is a requirement to generate ad-hoc and amendable letters in CRM (2007).
We might have +150 letters so I am thinking about using MS Word integration with SAP CRM to deliver this.
With SAP CRM 2007, I understand that it is indeed possible to generate WebServices that will then be consumed by Word templates through the mail merge functionality. So agents will not have to enter BP name, address and so on. All this can be done by configuration which is great.
My point of concern is how to integrate this design to StreamServe for printing purpose (we do not want to go into local printing)
Can StreamServe collects the Word generated document?
Should this Word document be converted as PDF before or can StreamServe do it?
Should StreamServe exploits the XML contents within the Word generated document?
Thanks for your help and insights about this.
Brice.
Edited by: Brice Vialle on Nov 21, 2008 9:26 PM
Edited by: Brice Vialle on Nov 21, 2008 9:34 PM

Hi Chris,
    Your advice helps me a lot, thank you.
    I upload an XML-Format template Word Doc to server as a MIME Object.
    When OfficeControl is started in Web Dynpro, OfficeControl automatically open the XML-Format template.
   For the first time, I get the XString-type Context attribute bind to the content of the Word Doc,
   then translate it to string, I got the XML-format content, it's great!
   However, after the first time, when I input any new contents in MS Word in Web Dynpro,
   no matter I execute "Ctrl + S" or click the "savedocument" button,
   when I translate the XString Context attribute to String, I got messy code. (but the first time, it is good plain text)
   I use the function module: ECATT_CONV_XSTRING_TO_STRING (good for first time, dump after first time),
   SCMS_XSTRING_TO_BINARY, SCMS_BINARY_TO_STRING (good for first time, messy code after first time).
   My Demo source code is in: (system) SMV --> (local object) zhaode --> (Dynpro Component) ztest_office_control
   core source code is as:
   clear itab.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER = lv_datas
    IMPORTING
      OUTPUT_LENGTH = lv_length
    TABLES
      binary_tab = itab.
CALL FUNCTION 'SCMS_BINARY_TO_STRING'
    EXPORTING
      input_length = lv_length
      mimetype = 'text/plain; charset=utf-8'
    IMPORTING
      text_buffer = lv_datas_string
      output_length = lv_data_len
    TABLES
      binary_tab = itab.
    Can you give me some advice?
Best Regards,
Derek

Business scenario..for ISU and integration with R/3 modules..

Scenario:
1.     Client is providing Utility services to the customer and also to its own employees.
The service is also consumed by the employees who are treated as contract partners in ISU. The constraint is that the utility bill has to be deducted from their payroll, which is deducted monthly using a wage type from their pay roll, which is in SAP R/3.
2.     Similarly some of the contract partners are also vendors to the client (the vendor and contract partner is same). The consumption of utility bill is adjusted to the payment made by the client to vendor.
Questions :
1.     How we can deduct the utility bill of the employees from their payroll. Is there any integration of ISU with HR ?
2.               Also how can we clear the receivables in FICA since data can be pushed from FICA to FICO thru reconciliation keys but not vice versa ?
3.     How can the utility bill be deducted from vendors account and there is no standard link between vendor master to contract partner in ISU.
     Can anybody suggest any standard solution for these two scenarios or any work arounds .
Early solutions are highly appriciated
Thanks and Regards

Hello,
Please look into my answers below:
Questions:
1.     How we can deduct the utility bill of the employees from their payroll. Is there any integration of ISU with HR?
i.     There is no integration between ISU with HR. What you need to do is that create separate account determination id <say HR> and use this id in Contract account to identify that a particular contract account is an employee related ID.
ii.     Now at the end of the day or month collect the O/s balances of all the employee contracts in a form of flat file, use a BDC program to update the data in the HR table PA0014 <Please confirm with your HR colleague too> so that their pay would be = Actual payroll-Amount due.
iii.     After the above step, make sure that you run FPY1 <Payment run program> to clear all employee open items. You can have a separate payment method for Employees and attach the same in contract account
iv.     You can create a separate Z table to map Employee ID with a contract number so that during creation of flat file in step 1.ii above, your job becomes easier.
2. Also how can we clear the receivables in FICA since data can be pushed from FICA to FICO thru reconciliation keys but not vice versa?
i.     Please refer to point 1.iv above. You need to run FPY1 Payment run to clear employee receivables in FICA.
3. How can the utility bill be deducted from vendors account and there is no standard link between vendor master to contract partner in ISU.
i.     There is no integration between ISU with AP. What you need to do is that create separate account determination id <say AP> and use this id in Contract account to identify that a particular contract account is a Vendor related ID.
ii.     Now at the end of the day or month collect the O/s balances of all the vendors in a form of flat file, use a BDC program to update the data in the AP table BSIK so that amount to be collected from vendor = Actual amount-Amount due.
iii.     After the above step, make sure that you run FPY1 <Payment run program> to clear all Vendor open items. You can have a separate payment method for Vendor-Contract Accounts and attach the same in contract account
iv.     You can create a separate Z table to map Vendor number with a contract number so that during creation of flat file in step 1.ii above, your job becomes easier.
Additional points to be considered
1.     Check if at all separate clearing rules are needed for Employee- Contract accounts, Vendor-Contract Accounts & other contract accounts.
2.     Verify FM COMPUTE_CONTRACT ACCOUNT_BALANCES is useful in obtaining the balances of contract accounts <I do not have SAP ISU active system with me else I would have provided correct FM>
3.     There may be performance issues based on the volumes of the data.
Rgds
Rajendra

Web Dynpro integration with R/3

Dear all,
We have the following requirement in Web Dynpro integration with R/3
We have to update the local SQL tables based on R/3 system return values. R/3 system should call the webdynpro business method for updating local SQL Status table. In the R/3 system after purchase order is created, via user exit it should call and update some fields in the local SQL tables. To solve this problem we have thought of following solutions possibility:
1.       In R/3 system based on user exit, it calls the ABAP Proxy -> XI (SOAP Adapter) -> Web Dynpro Web Service in WebAS-> XI -> ABAP Proxy -> User exit PO continues.
2.       In R/3 system based on user exit, it calls directly web service then web service goes to user exit.
3.       In R/3 -> user exit -> ABAP Proxy JDBC Adapter -> SQL stored procedure call - > user exit.
Please give your valuable suggestion or any other options to solve above problems.
And another one question is how to create web service and deploy into WebAS through webdynpro project?. Kindly guide us to the correct document for creating webservice through webdynpro or any other related url link.
Advance thanks,
S.Saravanan.

Hi Sarvanan,
Please refer to the following link for help on webservice,
Creating webservice, http://help.sap.com/saphelp_nw2004s/helpdata/en/db/99c04ba22fe64f96a8651df68eab92/frameset.htm
Consuming a Web Service in JAVA,
http://help.sap.com/saphelp_nw2004s/helpdata/en/81/12703e5da3e946e10000000a114084/frameset.htm
Consuming webservices in webdynpro,
http://help.sap.com/saphelp_nw2004s/helpdata/en/91/9c2226df76f64fa7783dcaa4534395/frameset.htm
I feel once you go through these links you yourself will be in a much better position to decide upon to your design options.
Reply back for more help,
Guru.

Problem about BIEE Integration with LDAP

Hello,
I have a problem in OBIEE11.1.1.6
I do BI EE 11g Security Integration with OPENLDAP follow below link,
http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-security-integration-with-microsoft-active-directory/
It works well using user that store in OPENLDAP ,
now I want to realize this function,
that user roles store in external db table,then get roles by init block,
but I faced a problem, If I use session system variable 'WEBGROUPS' to get some value in db,when user login BIEE,it can get values of 'WEBGROUPS'
but If I use session system variable 'ROLES' ,when user login BIEE,it can't get values of 'ROLES' that store in db,
the value will always show 'BIConsume;Authenticated User',It is default value in OBIEE11.1.1.6,
so I doubt way I can't user variable 'ROLES' to get value???
init block lik follow,
SQL: select T.att1,T.att2 FROM USER_ACCESS T
T.att1 is for variable 'WEBGROUPS'
T.att2 is for variable 'ROLES'
the value of 'WEBGROUPS' is correct.
but 'ROLES' not got the values that stored in db.
anyone know???
thank you in advance!

VITAS wrote:
that user roles store in external db table,then get roles by init block,
but I faced a problem, If I use session system variable 'WEBGROUPS' to get some value in db,when user login BIEE,it can get values of 'WEBGROUPS'
but If I use session system variable 'ROLES' ,when user login BIEE,it can't get values of 'ROLES' that store in db,
the value will always show 'BIConsume;Authenticated User',It is default value in OBIEE11.1.1.6,
so I doubt way I can't user variable 'ROLES' to get value???
init block lik follow,
Go to Enterprise Manager and create the ROLES named the same as the one you named in DB values. Now you should see them magically appear when you click on My account > Roles and Catalog Groups. :)
SQL: select T.att1,T.att2 FROM USER_ACCESS T
T.att1 is for variable 'WEBGROUPS'
T.att2 is for variable 'ROLES'
the value of 'WEBGROUPS' is correct.
but 'ROLES' not got the values that stored in db.Hope you did you enable Row Wise Init here ?
Let us know. Mark if helps.!
Thanks,
SVS

SOA 11g Worklist Apps Customisation and Integration with Plumtree Portal

Hi,
We want to migrate an existing application build using SOA Suite 10.1.3.3 to 11.1.1.2.0.
In the 10g application the worklist application was customised and the customised apps was linked as a remote portlet in BEA Plumtree Portal.
1)In 10g the worklist application source code is available (\SOA_Oracle_Home\bpel\samples\hw\worklistapp) for customisation but is that possible for 11g ?
(The location of the default deployed worklist apps in 11g is /../mdw_home/user_projects/domains/soa_domain/servers/soa_server1/tmp/_WL_user/worklistapp).
Can we take the source code and customize in jdev and deploy under a different contextname in 11g??
3)Our existing 10g worklist was customised a bit in terms of look and feel and for some custom authentication and it was deployed in the 10g SOA Server.
A sample jsp application was created and the login page of the custom worklist apps was linked in a inframe so that it works when integrated with the Plumtree portal as a remote portlet. And this worked perfectly in 10.1.3.3 SOA Suite.
However the 11g SOA worklist login when tagged in a jsp as an inframe in plumtree portal is giving a warning message
Warning: Unable to load content in a frame. Frame content will load at the top level. On cliicking the OK button the worklist page is opening. This is with Firefox browser . however form IE7 or 8 its timing out from portal.
As per http://newsoalife.blogspot.in/2009/09/framebusing-in-adf.html
changing the web.xml for the worklist can help.
Can anyone please let us know on the same as this appeas an unsupported one.
Regards
Ashif

Hi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

Quick Adress System (QAS) integration with SAP

Hi,
Can anybody please let me know how the Quick Address System can be integrated with the SAP.
It iwll be great if any of you [please forward me the documentation or installation guide for this integration.
Also, after proper integration of QAS, how can i acces it in SAP system. Is there any t.code or something like this? Plz provide any of the solution on it asap.
Best regards
Gaurav

Hi Gaurav
I'm the developer of the SAP QuickAddress Solution.
There are 2 main categories of SAP QuickAddress integration these being
SAP Certified Solution (GUI)
Non-Certified soultion (GUI)
The SAP Certified version hooks in via the BADI ADDRESS_CHECK, there is no need to change any SAP standard code or screen. Simply go into any address screen (eg BP) try and modify an address and you should get a popup if the address was invalid or incorrectly formated.
The non-certified version is similar to the certified but you would have to change code and screen, the advantage of this version is that it can integrate into any screen.
When you buy this software QAS normally come out on site and install and demo the software, I assume they haven't done this. If you want documentation give them a call (www.qas.com).
All QAS objects (ie transactions, tables, etc) are under the namespace /QAS/, search under this and you should find what you want.
NB: There will also be a ABAP Webdynpro version of this software available soon
Regards
Muntazir Khan

Portal Integration with Discoverer

How can discoverer application and workbooks be integrated with Portal? Currently designing for Data Warehouse project with webbased front end using 9iAs, Discoverer +, Reports.

I have tried to do the thing you have described about hacking the disco_frame.htm code. But it will not work for me.
The discoverer will not start. If I starts it, it will not take the undocumented parameters. Do you have any sugestions ?
Lene
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Chris Whiteley ([email protected]):
Here is some info from an earlier conversation. Not sure how well the html code will come through.. email me if not .
Christopher
Even better than that you can get the properties of the URL (by right clicking -> Copy Shortcut) and then use that ANYWHERE in Portal not just under the External Apps Portlet. This also means that you can manage the External Application centrally and any url referencing it will be updated.
If you want to be really smart you can embed the Discoverer Plus inside and HTML Portlet. This means the full application/report can be viewed through a Portlet.
You need to basically hack the disco_frame.htm code and take out the following code:
<script src="http://webserver/disco4i/scripts/htmlvars.js"></script>
<script src="http://webserver/disco4i/scripts/browser.js"></script>
<script src="http://webserver/disco4i/scripts/webdisc.js"></script>
<script>
document.writeln('<applet codebase="http://webserver/disco4i/applet"');
document.writeln(' width="200"');
document.writeln(' height="180"');
document.writeln(' code = "oracle.disco.DiscoApplet.class"');
document.writeln(' align="left"');
document.writeln(' valign="TOP">');
document.writeln('<param name="namespace" value="OracleDiscoverer4i">');
document.writeln('<param name="useslibrary" value="Oracle Discoverer 4i">');
document.writeln('<param name="useslibrarycodebase" value="dis4uie.cab">');
document.writeln('<param name="useslibraryversion" value="'4,1,33'">');
document.writeln('<param name="org.omg.CORBA.ORBClass" value="com.visigenic.vbroker.orb.ORB">');
document.writeln('<param name="Session" value="'Disco4iOracleDiscovererSession4">');
document.writeln('<param name="Locator" value="'Disco4iOracleDiscovererLocator4">');
document.writeln('<param name="HELPDIR" value="help">');
var pName = new Array(0);
var pValue = new Array(0);
// override default FrameDisplayStyle=separate
if (doNotRedirect())
pName[0] = "FrameDisplayStyle";
pValue[0] = "";
constructParamTagsOverride(parent.location.search, false, pName, pValue);
document.writeln('</applet>');
</script>
There are some addtional document.writeln Parameters (NOT DOCUMENTED) that enable you to fire a workbook off automatically:
document.writeln('<param name="UserName" value="DSMS">');
document.writeln('<param name="Password" value="DSMS">');
document.writeln('<param name="Database" value="orcl.uk.oracle.com">');
document.writeln('<param name="WorkbookSource" value="Database">');
document.writeln('<param name="Workbook" value="Demand">');
The downside is that it will refresh each time you go to the page the portlet is in.
We have also found a way of using PLSQL to interogate the EUL4 tables and present the user with a list of workbooks that have access to based on what is shared
to them in the 'Sharing' Option. You can syncronise the Portal user and the Discoverer/Database user and hey presto, you have central managability...Almost. The
'almost' being the fact that we haven't found a way of passing the Portal password into the url to launch Discoverer.
<HR></BLOCKQUOTE>
null

Ale master data scenario integration with non sap syetem i.e seebeyound

hi
we have a business process scenario integrating with non sap system (i.e seebeyound)
action code      itemnumber    plant code
a(add)          material1     plant 2
d(delete)       material 3    plant 6
etc
we have upto one million materials assigned to 300 plants
we have to send all the above data to non-sap system (see beyound)
should we go for a custom idoc and setup the rfc configuration for the two sytems.
or can you please help how to go for this scaneriao

this is not one time.it is on daily basis.
please look at this scenario.what i need is how should i go for ale/idoc scenario for this one
Business case for Heiler Part/Plant Interface:
A key function of the Heiler PBC tool is to provide users a choice
between a "Global Catalog View" (e.g. all parts in the catalog) or a
"Local Catalog View" (e.g. the subset of parts in the catalog that have
a Material Master established for the user's plant in SAP). The "Local
Catalog View" is the default condition and encourages users to procure
parts that are on contract for their plant and potentially already
stocked as an inventory item at their plant. Parts that are not in a
user's "Local Catalog View" can only be procured as a spot buy purchase
order, requiring processing by a buyer.
The new Part/Plant interface is required in order for the Heiler PBC
tool to provide this "Local Catalog View" function. The Heiler
Part/Plant table will document what plants in SAP have a Material Master
record established for each part. SAP will maintain the Heiler
Part/Plant table using this interface. When a user performs a part
search in the Heiler PBC tool, the Part/Plant table determines if a part
is included in the user's "Local Catalog View".

OBIEE 10g integration with mapviewer

hello all,
i am trying integrate mapviewer map in obiee dashboard. and i am able to show maps which do not use bi answers data for any kind of interaction (i.e,no "nsdp" section in the map file). this works fine. if i am using any dashboard prompt to filter the map ( for example if want to see a particular county from a statewide map using dashboard prompt as filter) it is giving error as below:
*[MVThemeBasedFOIControl.foiLoaded] MAPVIEWER-05523: Cannot process response from MapViewer server. (MAPVIEWER-06009: Error processing an FOI request.*
Root cause:FOIServlet:Missing IN or OUT parameter at index:: 1)
there are two databases with same set of data. one is poc which was created by some one else. so we had to setup new schema to properly define all the data.
so problem occurs when using new schema as datasource. all the html datasource configurations are properly defined on mapviewer for new data.
followed these steps in setting up new schema:
->initially did not run any scripts nor created mvdemo , started clean and loaded the required tables using map builder from GIS shape files with geometry projected to world_mercator(54004). on the contrary POC schema two geometry columns in each table where one is actual coordinate system from GIS file and then it is projected to world_mercator system and loaded into second column using sql. all the geometry indexes looked similar.
->created all the mapping metadata exactly same as the POC. where all the themes uses world_mercator geometry.
both schemas are on same database. i have no idea of what causing the error when i use dashboard prompts. i am not sure if there are additional steps to be followed in creating database or if something else is missing some where. i have no prior experience with mapviewer and oracle spatial. this is kind of learning curve for me.
please let me know any suggestions or solutions .
regards,
mallik
Edited by: 863261 on Jun 2, 2011 12:33 PM
Edited by: 863261 on Jun 8, 2011 5:49 AM

Hello,
Is your environment similar to this in http://obiee-bip.blogspot.com/2010/10/obiee-integration-with-oracle-access.html or something different like diid you have create groups in OAM .?
Also assuming your repository groups and presentation catalog groups are already setup. In the different authorization init block you have created enable the ‘Required for Authentication’ check box.
NOTE: According to Oracle Access Manager (OAM) and Oracle Business Intelligence (OBI) Integration [ID 1217103.1]
Creation of group should be done by loging as Administrator user to rpd and webcat. This should be done on different machine that does not have OAM integration. With OAM integration only OAM user can log into presentation services and they don’t have Administrator user privileges.
Hope this helps. Pls mark if it does.
Thanks,
SVS

ADF Integration with BPEL

Hello,
I am new to BPEL. I am working on a sample .
I am working on ADF Integration with BPEL process.
I have an ADF Screen displaying data from an EMPLOYEE table in HR Schema . It has a button called "Update". I need to call a synchronous BPEL process on click of "Update" . This BPEL process will take the selected employee information as an XML input and update the last name to the first name as the response.
I have some doubts in that :
1. How to pass an XML Schema as input parameter to a BPEL process ? Can you please let me know some sample applications ?
2. I am creating a web proxy for the BPEL WSDL (created above) and my "Update" button is binded to a method which is calling the BPEL process.
How can i pass my XML input as the argument of the method to invoke the BPEL process ?
Thanks
Nutan

When using a web service proxy, you need to pass the data as an object, which' structure is defined in the web service proxy wrapper classes.
When you've defined a data control for your bpel process, you can just drag and drop the 'initiate'/'execute', your operation and bind this to the update-button.
When working with the proxy client, you need to populate your java class objects with the employee-object, this can be done in a backing bean or managed bean in your adf faces application.
For more information you can always have a look at my blog where I've provided an explanation about the different possibilities of interfacing adf with SOA.
Kind regards,
Nathalie

Table 30 of MM - Integration with FI

Similar Messages

Maybe you are looking for