Table ActiveX Library control with buttons + - Up and Down

Hi all,
I have seen an ActiveX control in the Library of the Adobe Layout. It can be added to the Table. I gives me four buttons + (add row), - (delete row), up and down to move the fields up and down.
I cannot find this Control. Can you please guide me where to find it in the Library.
Thanks,
FS

I think I do not need to write any Code for this Control.

Similar Messages

I just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear

i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS

Please try going to your settings area of your display. Click on General and go to 'reset all settings'
Good luck!

Transaction control with DI Server and B1WS

Hi everyone,
recentily I started working with DI server and B1WS, and talking with friends and with a brief research in the foruns Its seens to be impossible to have a Rollback in database transactions performed with DI server and B1WS.
Its really true? I mean, I receive the Session ID when I use the login service, it shouldn't be so difficult to have a rollback function with this info...

Really? Anyone knows?

IBAN: no control with Key Bank and Bank Account

Hi,
I maintain the IBAN number via SM30 (SAP 3.1I), but there is no control between the IBAN and the corresponding Key Bank (TIBAN-BANKL) and Bank Account (TIBAN-BANKL).
This means you can enter a valid IBAN whatever the key bank and bank account number.
Ex:
BANKS BANKL BANKN         IBAN
NL    019    0192331515 -> NL94RABO0192331515
NL    024    0240640764 -> NL94RABO0192331515
u2026
If anyone has resolved this issue ?
Thank you
Laurent

I think, System validates IBAN when you flag "Bank data" check box in country specific checks (General settings). Check this setting in your case.

Table not updating while command button is held down

Hi guys,
My application obtains data and then outputs this into a table which updates after each set of data is read. This part works fine, however I also require the user to be able to hold down one of two buttons to control control the function of an actuator (forwards and rearwards). To explain this further, when one of these buttons are pressed a voltage is output, when released the voltage is reset to zero. However, while the button is held down the table does not continue to update, when the button is released the table then updates through all the queued values. I understand that this is most likely a problem with the holding of the button causing the other user interface events to not be processed. I have therefore tried using ProcessSystemEvents(), ProcessDrawEvents(), and experimented with using an async timer to control the updating of the UI through the use of PostDeferredCallback(), all without success.
If anyone can help with a solution that would allow me to perform both of these required functions simultaneously it would be greatly appreciated!
Thanks in advance
Ben
Solved!
Go to Solution.

Could you use a toggle button instead of a simple button to be hold down? If yes, then in the button callback you could simple test the value of the toggle (1 if pressed, 0 if released) and operate turn on/off the output voltage to the actuator. You'll have a commit event every time the operator changes button state. (you may need to apply some security limit switch or timeput on the control in case the user forgets to turn the toggle off: the situation is similar to a three-state switch that controls a motorized window blind).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Viewing a folder as large icons with only up and down scrolling?

This is something that's been bothering me for a while and I just can't seem to find the answer.
If I open a folder, switch the view to "as Icons," and then make those icons larger, I'm forced to scroll through those icons by moving left/right and up/down. If there are a lot of files in this folder, it's quite a pain to do all that scrolling. Anyway I can change the view settings so I only have to scroll up and down?

Sort the Icons so that they fit the side to side dimension, any sort will work, by name is the obvious way.

Dynamic Table control with context nodes and attributes?

Hi all
I have node and attributes in context. i want to create table dynamically using this node and attributes, can anyone give code how to do this???
Thanks
Madhan.

Hi
Go through this [link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80a3de18-ee00-2d10-bfb3-946d7e00fd91?quicklink=index&overridelayout=true].
Regards
Arun.P

Linear actuator controlled with external encoder and smart motor - randomly stops

Hi,
This is my first experience with Labview or any sort of programming for that matter. I am using an Animatic Smart Motor Model: SM1720M version 4.15b with an Ultra Motion Bug linear actuator: 4-2B.125-SM17-3.2-1NO-B/EC4 and a 600 series optical encoder. I am trying to write a VI that allows me to manually control the linear actuator using the encoder. I attached the one I have been using, but for some reason it randomly stops working, generally when the actuator is extended about an inch and 2 1/2 inches. It stops in the same general area, but not the exact same spot. Any ideas? Any help would be much appreciated!
Attachments:
Manual Command.vi ‏29 KB

1. The VISA Clear and VISA Close should be outside the loop. You do not want to be re-initializing the VISA session each time through the loop.
2. You have the port initialized to use line feed as a termination character. When using termination character, you should not use Bytes at Port. Just set the byte count input of VISA Read to a constant larger than the longest message you expect to receive.
3. With the termination character you do not need the waits between or before the reads.
4. The 10 ms Wait in the outer loop is rather meaningless when the start button is True. The VISA Write takes much longer than 10 ms for the string you are writing. It does make sense to have a Wait in the False case.
5. The start button is set to Latch When Released mechanical action. With that setting it retuns to False every time it is read. The result is that the code in the True case only executes one time for each press of the button. Is that what you want?
A state machine architecture is more flexible and more robust.
As to why it stops in a particular place, you have not given us nearly enough information to even guess. What is the relationship between motor speed and displacement? Where do you do anything with the encoder? What is the format of the encoder output? How far does the motor move at various speed settings during one iteration of the outer loop? Where is the command to stop the motor when it gets to where you want it?
What error messages, if any, do you get when it stops?
Lynn

Itunes Library sharing with multiple ipods and 2 pc's

Hi, I have a new Ipod nano and want to use my wifes itunes library with my ipod. Which according to the tech stuff I can share the content by enabling on wifes pc. Done that, which I can now see library on my Acer laptop. However, I can't sync my playlist from her pc to my itunes. I want to download my own podcasts etc.. not clutter her itunes pc. When I transfer the ipod back to my pc it then wants to delete and re-sync.
We have 3 ipods in the house and 2 pc's.
Whats the best way of using the ipods and getting the most out of itunes?
Thanks

If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
Managing content manually on iPod and iPhone
Syncing Music to iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
There are several different ways to use two iPods with one computer, have a look at this help page for suggestions: How to use multiple iPods with one computer

Document Library Template with Metadata Navigation and Key Filters

When saving a document library as a template, any configured metadata navigation and key filters columns are lost. Has anyone else experienced this issue or know a viable workaround? Can anyone shed some light on why these settings are not saved with
the template?
Thanks!
Wade Hunter MCP/MCTS - WSS 3.0, MOSS 2007, SharePoint 2010

Wade,
Did you figure out a workaround or why this happens? I am having the same problem.
Thanks

SAP Business Objects Access control with BI4.1 and enterprise authetication

Hi Team,
We are on BI 4.1 with enterprise authentication. We are using IDM (oracle waveset 8) for access management. Currently we receive request from IDM and we manually configure user in BI4.1. We are now planning to automate this process, like as soon as user request place request through IDM , his access wil lget configure in BI 4.1
can we achieve this using SAP Business Objects Access controle or with any other method ? Need your guidance
Thanks,
Nivedita

Hi Andrea,
1. you configure the BOE Server with the SAP authentication for your SAP server
1b you configure trust between the portal server and the SAP system
2. you import the portal iView template as part of the SAP Kit into the portal server
3. you create a new system (or use an existing one) in the portal system landscape and configure the properties of the Crystal Enterprise properties
4. you create a new iView based on the portal iView template
ingo
I have some difficulties to create a new system, I don't know witch option i should choose.
     System (from template)
     +BI JDBC System
     BI ODBO-Compliant OLAP System
     BI SAP Query System
     BI XMLA-Compliant OLAP System
     EP 5.0 System
     HTTP System
     JDBC System
     KM Lotus System
     KM WebDAV System
     KM Windows System
     SAP system using connection string
     SAP system using dedicated application server
     SAP system with load balancing
     Web Service System using WSDL URL+
     System (from PAR)
     com.sap.km.cm.repository.manager
     com.sap.km.common.domino
     com.sap.netweaver.coll.appl.gw
     com.sap.netweaver.coll.appl.sync
     com.sap.portal.httpconnectivity.urlsystem
     com.sap.portal.ivs.sl.connector.helper
     com.sap.portal.runtime.application.soap
     com.sap.portal.systems.bi
     com.sap.portal.systems.datasource
     com.sap.portal.systems.EP5
     com.sap.portal.systems.jdbc
     com.sap.portal.systems.sap
     com.sap.portal.systems.webservices
     com.sap.portal.unification50.template
Thanks a lot
Selvam

Simple straight line motion control with brushless motor and encoder/microswitch

I want to go build a motion control system/program using labview. I have a brushless motor and a controller and a National instrument DAC (NI USB-6009). This is how my system looks like: receive an input signal 4-20mA, this should be converted to 0-5V for the controller for speed, controller should move motor till it hits micro switch. The micro switch/encoder should generate a signal (5V) back to shut the controller. I want to record the position of the motor in labview. How do I do this? How do I set the system up? Thank you in advance

Controller from anaheimautomation: MDC151-050301
Motor:BLWSG234D-36V-4000-R3
Controller and motor go together.
The input signal for the system will be 4-20mA. Using this signal I will correlate it to a specific voltage which will drive the speed of the motor. This will displace the lead screw linearly. I will have a microswitch that will be triggered by screw and will relay a signal to shut the motor. I want find a way to record the position of the shaft/leadscrew at that specific point. I want to identify a home position, halfway position and full length travel position. I will use 3 swiches or 1 switch in three positions to identify all these points.
My end result should be whwn I turn on the system or start the program It should detect whether it is at the home position, if not travel to home then respond accordigly given an input signal(4-20mA).
How will I program such on labview...finding all the right icons to record the data is such a mess for me since i'm a beginner.
Thanks

Ssid access control with WPA Ent and RADIUS author

Hi, I'd like to control the ssid requested in WPA Enterprise with RADIUS authorization: how to ?
Is there an attribute in RADIUS IOS or Cisco Aironet ?
thanks

Depends on what you are using for a radius server.
Here are some links that might help.
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00807917aa.shtml
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080921f67.shtml

I'm on iTunes 11.0.0.63 for Windows. iTunes used to display the total number of songs in my library, along with total playtime and memory footprint, at the bottom of the window. How can I make it display this information like it used to?

Hello! Thanks in advance for reading my question.
so, I updated iTunes to 11.0.0.63 on Windows, and the new layout looks nice, but iTunes no longer gives my total song count, memory footprint, and total play-time at the bottom of the window, the way it used to. I just want to know how to get that info back. Thanks so much!

Ctrl / or View > Show Status Bar should do it.
Weirdly having turned mine on the menu is not there to hide it again and the shortcut doesn't work.
tt2

Version control with concurrent InCopy and InDesign packages

Hi there,
If Editor A uses the "Forward for InCopy" option to create and send an InCopy package (.incp) to Editor B, and then erroneously uses the "Return for InDesign" function to create an InDesign package (.indp) before the Editor B has returned the new version of the package, can the superflous .indp file (that will never be used by anyone) be safely deleted?
The goal is to receive a new .incp file from Editor B and to treat it as the current version of the assignment, even though a .indp was accidentally created in the interim. Can we simply delete the .indp file or are there other complications that we need to consider?
Thanks.
--Stephen

Excellent, thank you! I just wanted to be certain.
--Stephen

Table ActiveX Library control with buttons + - Up and Down

Similar Messages

Maybe you are looking for