Table ANLP/ANLQ are blank

< MODERATOR: Message locked. Please post this message in the [Asset Accounting forum|SAP ERP Financials - Asset Accounting;. >
Dear all,i want to use table ANLP / ANLQ to carry out monthly posted depreciation or monthly planned depreciation,but no data in those 2 tables,is it correct?
highly appreciate your advise

Hi,
Yes you are right. When depreciation will be run on monthly basis, such table will be updated
Regards,
Jigar

Similar Messages

Table FAGLFLEXT - Functional Area blank for plan assessment cycle (result)

Hi all,
I have query regarding table FAGLFLEXT. We have plan data and need to report our plan data based on functional area and profit centres. Plan assessment was run and this is allocation from a cost centre to WBS.
In table FAGLFLEXT for this line items there's 2 lines created and in one of the line item the functional area is blank.
Is this a bug or is this standard SAP? Does anybody has experience on this table?
thanks

Refer to note 1024480 and see if the situation applies to your system.

Key figure units in fact tables of InfoCube are blank

I run RSRV - Key figure units in fact tables for my cube and found the following error message. I found one SAP note 941895 - RSRV test fails with unknown error, but our system status is SAPKW70020, so this note is not useful to our case. Pls advise!
System message:
The test Unit of key figures in fact tables for InfoCube XXX initial had to be terminated due to an unknown error (RSRV320).
Many thanks!
rajatina.

Hi Raja,
Check that in your transformation you have mapped Unit from source system to this key figure. If not then you will have to do the mapping and reload the data. If you are not able to get unit from source system then atleast you will have to assign some constant Unit if possible.
Regards,
Durgesh.

Crystal 2008 - Selected table names are blank or end in 1

I am creating a new report in Crystal 2008. I am connecting to a database using ODBC. The tables show up correctly in the available tables column of the Database Expert. Once I select a table the table shows up in the selected tables list as an icon only - no name or as an icon with a table name ending in 1. The table name that ends in 1 is not a duplicate.
Furthermore, in the field explorer the fields all show but I can not add any to the report.
Any ideas, this just started happening this week.

Hi Russell
Which database you are reporting off?
You can try following workaround and create indirect ODBC connection.
Create a report using OLEDB connection and select Microsoft OLE DB Provider for ODBC drivers and then create a report .
This will point to your existing ODBC connection through OLEDB provider.
For the tables name that are blank do you have hyphen '-' in their names?
As advised by Jayendra you can try with Service Pack 1for Crysatl Reports 2008.
Hope this helps..
Regards
Ankeet

Database wizard table headers are blank

This is an ongoing issue with crystal reports 2008. I have a progress Database with an ODBC connection. If I setup a connection to the database using the database wizard in CR 2008 I can see all of the tables, but if I add one of the tables to my report the table name does not display and I am unable to remove that table from the list. If I follow the same steps using crystal reports 11, this works without any issue. Does anyone know if this is a bug in crystal reports 2008?
Edited by: Kheasley on May 21, 2009 8:31 PM

Hi Russell
Which database you are reporting off?
You can try following workaround and create indirect ODBC connection.
Create a report using OLEDB connection and select Microsoft OLE DB Provider for ODBC drivers and then create a report .
This will point to your existing ODBC connection through OLEDB provider.
For the tables name that are blank do you have hyphen '-' in their names?
As advised by Jayendra you can try with Service Pack 1for Crysatl Reports 2008.
Hope this helps..
Regards
Ankeet

If Logical level mappings are blank in an LTS , what does it mean?

Hi All,
I was trying to find this out in the forum but couldn't.
In my LTS, on the content tab, if i don't specify any "Aggregation, group by" information for the dims associated with my Fact table and keep it blank, then what does it mean? Would OBIEE treat this as at the detail level by default? So to test this, I created a logical fact and for its LTS, i didn't associate any logical level for dimensions. The query didn't give me any error and worked fine by using the correct join details.
Also when do we associate an LTS with the Total Level for a dim, what's the use because as I understand, this means all our measures from that LTS would be calculated for the total level of the dim and we can do this by creating level based measure and associating it with the total level of the dim.
I'll be thankful if somebody could explain me this in detail or direct me to a relevant documentation/ blog
Thanks,
Ronny

Hi,
When you have only one logical Table Source(LTS).
You don't specify the logical levels. By default it would consider the detail level of the logical levels mapped to the fact table.
When you have Multiple logical Table Source(LTS).
The concept of Multiple LTS comes into picture when you have multiple sources. The BI server picks the optimum logical source depending upon the fields (columns) selected. And also depends on the Number of element set while creating the dimension hierarchies. Refer-http://gerardnico.com/wiki/dat/obiee/level_number_element
For example- Suppose you have two logical table source Fact 1 and Fact 2 and logical levels( dimension hierarchies are created for two dimensions Dim 1 and Dim 2).
For the first Fact 1 source logical level is mapped only with Dim 1 and Fact 2 is mapped to Dim 2.
(You need to decide which fact source to hit depending upon the dimensions used in the report.)
Then in the report when you select Dim 1 (by means of column selector/filters) then Fact 1 source will be hit and same appears in the query.
Then in the report when you select Dim 2 (by means of column selector/filters) then Fact 2 source will be hit and same appears in the query.
One more situation where you have mapped Fact 1 with Dim 1 First level of aggregation and Fact 2 with Dim 1 with Detailed level. Then the BI server picks depending upon the user's request. If the request data can be pulled from the detailed level ( which tends to be optimum then picks from the second source).
So, its always better to set the logical source and check the query, if its hitting the correct sources according to the requirements.
Regards,
MuRam

HT204081 Can i read books bought in itunes on my computer? Trying to open in adobe reader and all i have are blank pages.

I have purchased books on itunes, can read them on ipad, but cannot read them on my computer. They will go into my Adobe digital reader and list the table of contents but all pages are blank.
So should i have not bought itune books and stayed with amazon and others?

iBooks purchased via iTunes are normally protected with DRM and can only be viewed using the iBooks app on an iOS device. Such requirements are stated on every page where you can purchase an iBook, just below the button to buy.
tt2

Ekko-adrnr or ekpo-adrnr are blank..how to retreive the vendor/delv adress

hi,
First of all I want to know that though delivery address and vendor address are there in me23n but ekko-adrnr/ekpo-adrnr are blank...i need to display these addresses in my script...
How do i retreive these addresses in the best possible way using any function module or using concept of address_handle?

hi
do like this
DATA:l_lfm1 LIKE lfm1,
     l_adrnr type adrnr.
IF is_ekko-adrnr IS INITIAL.
Get address number from table LFA1
SELECT SINGLE ADRNR
         FROM lfa1
         INTO l_adrnr
        WHERE
              lifnr = is_ekko-lifnr.
else.
move: is_ekko-adrnr to l_adrnr.
ENDIF.
regards
vijay
<b>reward points if helpful</b>

How to reject external table rows with some blank columns

How to reject external table rows with some blank columns
I have an external table and I would like to reject rows when a number of fields are empty. Here are the details.
CREATE TABLE EXTTAB (
ID NUMBER(10),
TSTAMP DATE,
C1 NUMBER(5,0),
C2 DATE,
C3 FLOAT(126)
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY EXT_DAT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY NEWLINE
LOAD WHEN (NOT (c1 = BLANKS AND c2 = BLANKS AND c3 = BLANKS))
LOGFILE EXT_LOG_DIR:'exttab.log'
BADFILE EXT_BAD_DIR:'exttab.bad'
DISCARDFILE EXT_BAD_DIR:'exttab.dsc'
FIELDS TERMINATED BY "|"
LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL
FIELDS (
ID,
TSTAMP DATE 'YYYYMMDDHH24MISS',
C1,
C2 DATE 'YYYYMMDDHH24MISS',
C3
) LOCATION ('dummy.dat')
REJECT LIMIT UNLIMITED
So, as you can see from the LOAD WHEN clause, I'd like to reject rows when C1, C2 and C3 are empty.
The above statement works fine and creates the table. However when I am trying to load data using it, the following error is produced:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "not": expecting one of: "double-quoted-string, identifier, (, number, single-quoted-string"
KUP-01007: at line 1 column 41
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
It seems that external tables driver does not understand the "NOT (...)" condition. Could anyone suggest how I can achieve what I want in a different way?
Thank you.
Denis

Another method would be to simply remove the "LOAD WHEN condition" and create a view on the external table which filters the data.
CREATE EXTTAB_VIEW AS
SELECT * FROM EXTTAB
WHERE not (c1 is null and c2 is null and c3 is null);

TS3999 How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook.

How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook. The all icloud is checked on my phone and the enable icloud account and push are selected on the Macbook.
Thanks

Do the events from your iPhone calendar appear on icloud.com? If not, go to Settings>Mail,Contacts,Calendars>Default Calendar (in the Calendars section) and make sure you have selected an iCloud calendar as your default. If you haven't, make this change, then add a new event on your iPhone calendar and see if appears on icloud.com and your Mac now.

My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Plea

My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Please help me. Some of the websites show thier icon normally.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3

Yes, it doesn't work. I ran in safe mode. nothing changed. I uninstalled Mozilla firefox with only standard removal, no change. I finally uninstalled Mozilla with complete removal and reinstalled it, then it return to normal. Why does this happen? Thanks for your reply.

Tables and structures are used in a standard scripts

how to find which tables and structures are used in a standard scripts?
pls explain step by step process...
Edited by: abap on Jun 21, 2008 4:36 PM

Go to Transaction SE80, Select Program and paste that program name below..
Then drop down the tree of that program...then you will find option " Dict. Structures"..
Here you can find the tables which has been you for that transaction / program.
Regards,
Santosh

All text in all email are blank, can't view attachments.

After last osx update 10.5.6 I noticed a problem with my email. I have 2 email accounts in mail 3.5 The 1st works fine, the 2nd account lost all text in all email in in-box. Also all attachments are blank. I've tried forwarding the email to another account and also printing email but all the text looks as if it has been deleted. I've tried the font color and encoding but no luck. What would cause 20 emails to delete all the message text and blank out the attachments in only one email account?

update - I did a rebuild mailbox and all email in that problem account diapered. I can only guess that the email got corrupted and the rebuild purge the problem records. They are not in the delete folder either. What would cause one email box to become corrupt?

Updated iPad 2 last night. All movies (9) on my iPad can no longer be viewed. The movie plays but the photos and scene selection are blank. How do I fix this

Updated iPad 2 last night. All movies (9) on my iPad can no longer be viewed. The movie plays but the photos and scene selection are blank. How do I fix this

Quit the app and restart the iPad.
In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Try the videos app again.

Creation of new userfields by code directly after tables where they are

when i create a new user fields directly after the creation of user tables where they are, i have always the same error, (table doen't exist) but i do the verification (also by code) that the table exist as an object and also exist in SAP data base.
sameone knows how can i do that?
thank you
Mounir Lazraq

You should be able to do so. I don't understand why you are getting this error.
Are you sure you release the table metadata object before acting on the field
metadata object ?

Table ANLP/ANLQ are blank

Similar Messages

Maybe you are looking for