Table Balance Carry Forward per Trading Partners

Dear all,
Currently, I need to build a report that list detail Trading Partners per G/L Account transactions and per equity type also.
But I have a problem in retrieving amount Balance Carry Forward per Trading Partners.
I have checked through Table JVTO1 but it only retrieve total Balance Carry Forward and cannot be detailed per Trading Partners.
Could you please advice me any tables for Balance Carry Forward that can be detail listed by Trading Partners (or can be linked to Trading Partners)?
Thank you!
Thanks,
John

We faced the same issues before and we had 2 environments i) still on R/3-GLT0 ii) with New GL -FAGLFLEXT . On the R/3 environment we created a new Special Purpose Ledger and activated the summary updates only key fields- sort of like an extended version of GLT0. The R/3 environment worked quite well.
Whereas on the New GL we thought it was working but it seems we need to activate and Assign Scenarios and Customer Field to Ledgers using Scenario FIN_CONS(filed RASSC) and assign to ledger 0L.
The problem that we had with New GL-FAGLFLEXT was that unlike Special Purpose Ledger we are not able to recalculate and repopulate the field RASSC Trading partner since it was a std table. Therefore if you want to look at historical postings then this solution will have this drawback , it can only keep track of future updates of RASSC-Trading Partner in FAGLFLEXT.
We tried to activate the Special Purpose Ledger in NewGL but it was not easy due to the Doc Splitting rule and a hosts of other OSS notes that need to be tested and implemented. Good luck trying to implement Special Purpose Ledger in NewGL.

Similar Messages

Balance Carried Forward in Document Currency

Hi, Experts,
In My Customer Account Statement I need the Field in
"Balance Carried Forward in Document Currency"
Present in my Report "Balance Carried Forward in Local Currency"
In this field Having the table KNC1. But in this table "Balance Carried Forward in Document Currency" field is not there i need this field.
Thanks & Regards,
Sreedhar.

Hi,
As long as both the Document and Local currencies are same, the fields
"Balance Carried Forward in Document Currency"
and
"Balance Carried Forward in Local Currency"
are same.
So first check both the currencies are same or different.
check for the WRBTR field in fi Tables LIKE BSID,BSAD this is the doc currency
and the field DMBTR is the local currency field.
reward if useful
regards,
Anji

F.07 customer balance carry forward doubts

Hi folks,
i have some concerns about T-code F.07.
1. Can we run this Tcode more than one time for a particular customer account for the same fiscal year? If it's allowed what will happen?
2. For the record in KNC1 table, if we run the F.07 twice, what will happen? will the system created two records, or the second run will update the first run. eg. the first carry forward have the amount 400. and after carry forward this is another invoice posted wit amount 100 with the posting day in the previous fiscal year, so will this 100 carry forward automaticly? or need to run the balance carry forward again for this customer ? and what's the records looks like in table KNC1 for these three phase?
thanks in advance

Mr. Dave,
If after the balance carry forward from the Previous year to the current year (whether AR/AP/GL) and an entry is passed in the previous year... if the balances are not getting updated, what could be the reason.
For example, if a GL Account has a balance of 400 and the balance is carried forward to next year. Then another 100 is passed to the same GL Account but in the previous year. Then according to you (and as per logic), the last year closing balance and the current year opening balance shall become 500. But, after posting this new entry of 100, both the balances remain at 400. and we are again having to do a balance carry forward. What could be the reason for this and how we can avoid this.
Regards
Siddique

Query regarding Balance carry forward value in KNC1

Hi Experts,
Please let me know whether the field UMSAV(Balance carry forward field) will be accumulation of all BSID and BSAD transactions for particular KUNNR for their respective HKONT values.
If some transaction is updated in BSAD or BSID, will it compulsory reflect in KNC1 table or not? Please let me know.
Regards,
Kiran A.

Dear Kiran,
The values on UMSAV per definition matches the summarization of all the open item values for a customer number as the resulting amount of summing up the balance carry forward from the previous fiscal year plus the movements on the suitable year.
Nevertheless, it is updated under the summarization of the value on UMSAV for the previous fiscal year and adding the total amount of items posted on bsid AND bsad. You must notice that it only depends on which period the movements take part, the S/H movement, and that it doesn't depend on the GL account but the customer number. If you also need the GL account you must also check KNC3 for Sp.GL operations, KNB1 and T074 tables.
I hope this information helps. Regards,
Lidia

Balance Carried Forward problem

Hi Experts,
when running the Ledger for one range of posting period, the customeru2019s line items and cumulative balances are separated into 2 different reconciliation accounts.
While running for the next yearu2019s posting period , the Carry Forward Balances of Customers from previous year are aggregiated into one G/L account ,other account 0 balance is carried forwarded.
My program is fetching from table KNC1 which will have Balance carry forward of the two combined accounts which is going to 1st account.
Please let me know any table or FM where I can get Balance Carry Forward with passing Fiscal Year, Customer Code, GL Account_.( KNC1 table doesn't help in my case)_
Please let me know.
Thanks and Regards,
Kiran.

First look at [Fiscal Year Change Documents|https://websmp105.sap-ag.de/fiscalyearchange]
Then look for those BAPI
- BAPI_AR_ACC_GETCURRENTBALANCE Closing balance of customer account in current fiscal year
- BAPI_AR_ACC_GETKEYDATEBALANCE Customer account balance at a key date
Regards

Customer line items with balance carry forward no opening balance

Hello FI Experts,
We have ticket where the user is using a Z* Report for Customer line items with balance carry forward. In 31.01.2007 user has posted some legacy data, latter he was executing this Z* report then user can see the values posted on the same day (31.01.2007) as line items. But he was executing the report on 01.02.2007 then he was not able to see the line item as well as the values posted on 31.01.2007 as opening balance as on 01.02.2007. But if we run the report as on 01.01.2008 then we are able to see the values which are carry forwarded as opening balances. Did anyone have worked on this type of scenario?
Requirement Here Is: The values that have been posted on 31.03.2007 which are still open line items should get displayed as opening balance as on 01.02.2007.
Thanks for helping on this issue.

Hi,
Any report will get data from Tables. Please check whether the table you have used to develop this report has opening balance.
Balance will be carry forwarded only when you run the balance carry forward program. Check whether this was run for the date you have specified. This can be done in the year end.
If you are checking in the middle of the year, then the balance will not be carry forwarded.
Regards,
B. Radhika.

Migration cockpit of new G/L- balance carry forward

Hi,
I have a question regarding the migration cockpit for new G/L. This a prepaid service of SAP and we are at test stage of migration cockpit. Before migration to new G/L, we have
posted year-end-postings t-code
F_TR_01 for Turkey , program RFSUMB00
for all P&L accounts and balance sheet
accounts for year 2007. Thus, all G/L
accounts give a balance of zero for
year 2007. Among the migration cockpit
activities ,do we still need to
execute transfer balance carry
forward step?
Kind regards,
Gökçen.

Hello Gokcen,
In your case, you can execute the ' Transfer balance carry forward' step of the GL Migration cockpit, for two reasons:
1. Since the migration cockpit moves data consistently from the classic GL database tables to the (New) GL database tables, this step needs to be executed.
2. The cockpit has steps synchronized so that there is no harm in executing a step that may seem redundant. So, better to execute the step than not
Regards,
Sangeeta

Balance Carry Forward issue

When doing a balance carry forward, the retained earning accounts carryforward is appearing under the P&L carryforward as opposed to the balance sheet process. Due to this, the retained earnings carryforward is only happening at the GL account + Co Cd level (and PCA if doing a PCA carry forward). WE need it to be in the Balance Sheet carry forward so it can be rolled over at a more detailed level (namely Trading partner, Transaction type etc).
Since retained earnings account is a Balance sheet account, it would be safe to assume that it would appear under the Balance Sheet carryforward process. However, because that is not happening and its being included in the P&L carryforward, manual reclass entries need to be posted with the correct code block elements.
Does anyone know if this is something maintained at a configurational level? Any help would be highly appreciated.

At the year-end, you "roll over" all of your P&L account balances to the retained earnings account (which is a balance sheet account) so you could show the P+L result in the balance sheet in the equity section. It is very logical that you see the retained earnings account in the P&L carryforward. In FS00, all of your P&L accounts have a retained earnings account type (X, e.g.) that is linked to a GL account (which is the retained earnings balance sheet account). Balance sheet accounts in FS00 are not assigned to any retained earnings acct type.

Balance Carry-Forward Problem for Subledger Accounts

Hi Experts,
We are doing the Balance Carry-Forward this Year 2012 and we are having problems with the amount to be carry-over of AP/AR Subledgers for this year. We checked the C/F Balance for G/L and there are no problems.
When I go to tables KNC1 or LFC1, I see items for both years 2011 and 2012 with a Balance Carry-over value. So during my Balance-Carry Over calculation during debug, it gets the value in KNC1 or LFC1 for 2011 then subtracted with the value in KNC1 or LFC1 in 2012. Why is this happening? Supposedly the 2012 entry on KNC1 or LFC1 should not exist yet right?
Also the entry on 2012 C/F Balance should only be under the 2011 Posting as the Document Entry has the Posting Period 12 2011. Right now the Posted Entry is in C/F Balance 2011 and 2012 as well. Is this how the Balance C/F Posting works?
Please enlighten me on how SAP works on this one.
Thank you so much!

Hi,
Why you need to do debugging for F.07?
If you have inconsistancy in your opening bal and closing balances, you can anyhow run the carryforward program again sequentially for 2010, 2011...for GL/AR/AP
Now check closing balance for FY 2011 and compare the same with opening bal of FY 2012.
Regards,
Srinu

Balance Carry Forward in New GL - Substitute RMVCT

Hi,
We have assignet the Consolidation Scenario to our main ledger in New GL, so that the field RMVCT is part of the FAGLFLEXT table.
We would like to have a unique movement code in the balance carry forward, for example F00.
We can map any filled movement code to a specific carry forward movement code, that's fine (table T856 allows that in the definition of the movement code).
But, and that is the issue, for balance sheet account without movement code, the balance carried forward has also no movement code, and I don't see the way to substitute the value to get F00 also for these account (there is no BSEG entry for the balance carry forward operations).
Thanks for an anwser.

Hi,
Voor profit centers you have to run the balance carried forward in PCA.
Paul

G/L Accounts Balance Carried Forward

Hi,
Is there any way to find the G/L Accounts Balance Carried Forward? Tables, Functıon Modules etc...
Thanks!
Best Regards
Beserithan

Hi,
it depends if you are using New GL (available since MysapERP2004).
Carried forward balance is in period 0 in SAP; either GLT0 (Old geneal ledger) od FAGLFLEXT.
If you look at logical database SDF: Old general ledger values are fetched from GLT0, new general ledger values are transfered to GLT0 structure using function 'FAGL_GET_GLT0'.
Regards,
Clemens
Regards,
Clemens

Wrong balance carried forward...

Hi
Issue:
We have Jan-Dec Fiscal year, however one of our resource wrongly ran the Balance carry Forward program for FY 2013, due to which the balances are carried forward to 2013 year. The consequences is GLT0 was updated with 2013 entries which was not expected. Kindly advice how to reverse BCF happened for 2013 or How to remove balance for 2013 from GLT0 table which wrongly entered.
Please reply

Hi,
Run balance carryforward programs for FY 2012 again.
There is no harm while performing the above again.
Once GLT0 is carriforward to future year, you cannot remove them, Since there wont be any issue here also. Let it be there.
So in FY 2013, just run these programs again to adjust those opening balances, which are not updated to the table.
Regards,
Srinu

Balance Carried Forward in BPC10 NW

Hello All
I am trying to run the BCF program for BPC10 NW. It works in the development system but not in the QA system which is a direct copy of the config for both masterdata and settings. There is data to be carried forward so I am at a loss to understand why there is no carryforward. Any ideas guys apart from config??

Hi,
As long as both the Document and Local currencies are same, the fields
"Balance Carried Forward in Document Currency"
and
"Balance Carried Forward in Local Currency"
are same.
So first check both the currencies are same or different.
check for the WRBTR field in fi Tables LIKE BSID,BSAD this is the doc currency
and the field DMBTR is the local currency field.
reward if useful
regards,
Anji

New GL implemented, problems in F.01 and trail balance report and balance carry forward.

Dear Friends,
One of the my client recently implemented New GL in the Dev system, and getting posted the documents. now we are facing the many problems in the Dev system.
1. F.01 Financial statement report not generating for the year 2008 to till 2014 fiscal years.
2. the same in trail balance also not generating data form the year 2008 to till 2014 fiscal years.
3.system is asking the carry forward the balances form the 2008 to till, when we try to carry forward the 2008 year amount only forwarding for the all the fiscal year, not adding the other balances.
i went through some forums and i did the some analysis on this, after implementing new GL the table GLT0 was desble, data was not updated in the GLT0 all the data has been moved to FAGLFLEXT table. later i activated the table GLT0 and able to storing the data both the tables.
now i want to see the all my privious year report in the DEV system. all the data is there in the tables expect GLT0. how can i recover reports as well as how can i do the carry forward balances?
even still i have not carry forward for the 2014 balances, those balances also not there in the reports? but data is there in the table.
Please help me on this.
Regards,
Krish

Hello,
balance carry forward is done with TCd.
FAGLGVTR
when you are on SAP nGL.
any further quesitions?
By the way why don´t you do searching?
all the best erwin

Vendor balance carry forward

Hi all
Could any one please help in finding out table for vendor balance carry forward , say in case of GL i have FAGLFLEXT the same kind of table for Vendor as well
Ravindra kumar

Hi
Check FBWARI0EA & J3RFASK
Regards
Roobal

Table Balance Carry Forward per Trading Partners

Similar Messages

Maybe you are looking for