Table breaking - More Newbie Q's

http://www.oerica.com/test.htm
The text in table cell breaks when it extends past the width
of cell. I've tried tabe-layout__fixed, min/max widths, div tag
within the table cell. Not sure what I am missing.

On Mon, 11 Aug 2008 01:27:46 +0000 (UTC), "TylerMadeIt"
<[email protected]> wrote:
>
http://www.oerica.com/test.htm
>
> The text in table cell breaks when it extends past the
width of cell. I've
>tried tabe-layout__fixed, min/max widths, div tag within
the table cell. Not
>sure what I am missing.
Insert a space in between those letters somewhere, and things
will
fall back into place.
A table cell will expand to the width of its contents,
regardless of
the width specified.
Win
Win Day
Wild Rose Websites www.wildrosewebsites.com
[email protected]

Similar Messages

Row chaining in table with more than 255 columns

Hi,
I have a table with 1000 columns.
I saw the following citation: "Any table with more then 255 columns will have chained
rows (we break really wide tables up)."
If I insert a row populated with only the first 3 columns (the others are null), is a row chaining occurred?
I tried to insert a row described above and no row chaining occurred.
As I understand, a row chaining occurs in a table with 1000 columns only when the populated data increases
the block size OR when more than 255 columns are populated. Am I right?
Thanks
dyahav

user10952094 wrote:
Hi,
I have a table with 1000 columns.
I saw the following citation: "Any table with more then 255 columns will have chained
rows (we break really wide tables up)."
If I insert a row populated with only the first 3 columns (the others are null), is a row chaining occurred?
I tried to insert a row described above and no row chaining occurred.
As I understand, a row chaining occurs in a table with 1000 columns only when the populated data increases
the block size OR when more than 255 columns are populated. Am I right?
Thanks
dyahavYesterday, I stated this on the forum "Tables with more than 255 columns will always have chained rows." My statement needs clarification. It was based on the following:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/schema.htm#i4383
"Oracle Database can only store 255 columns in a row piece. Thus, if you insert a row into a table that has 1000 columns, then the database creates 4 row pieces, typically chained over multiple blocks."
And this paraphrase from "Practical Oracle 8i":
V$SYSSTAT will show increasing values for CONTINUED ROW FETCH as table rows are read for tables containing more than 255 columns.
Related information may also be found here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c11schem.htm
"When a table has more than 255 columns, rows that have data after the 255th column are likely to be chained within the same block. This is called intra-block chaining. A chained row's pieces are chained together using the rowids of the pieces. With intra-block chaining, users receive all the data in the same block. If the row fits in the block, users do not see an effect in I/O performance, because no extra I/O operation is required to retrieve the rest of the row."
http://download.oracle.com/docs/html/B14340_01/data.htm
"For a table with several columns, the key question to consider is the (average) row length, not the number of columns. Having more than 255 columns in a table built with a smaller block size typically results in intrablock chaining.
Oracle stores multiple row pieces in the same block, but the overhead to maintain the column information is minimal as long as all row pieces fit in a single data block. If the rows don't fit in a single data block, you may consider using a larger database block size (or use multiple block sizes in the same database). "
Why not a test case?
Create a test table named T4 with 1000 columns.
With the table created, insert 1,000 rows into the table, populating the first 257 columns each with a random 3 byte string which should result in an average row length of about 771 bytes.
SPOOL C:\TESTME.TXT
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
INSERT INTO T4 (
COL1,
COL2,
COL3,
COL255,
COL256,
COL257)
SELECT
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3)
FROM
DUAL
CONNECT BY
LEVEL<=1000;
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SET AUTOTRACE TRACEONLY STATISTICS
SELECT
FROM
T4;
SET AUTOTRACE OFF
SELECT
SN.NAME,
SN.STATISTIC#,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SPOOL OFFWhat are the results of the above?
Before the insert:
NAME                      VALUE
table fetch continue        166
After the insert:
NAME                      VALUE
table fetch continue        166
After the select:
NAME                 STATISTIC#      VALUE
table fetch continue        252        332 Another test, this time with an average row length of about 12 bytes:
DELETE FROM T4;
COMMIT;
SPOOL C:\TESTME2.TXT
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
INSERT INTO T4 (
COL1,
COL256,
COL257,
COL999)
SELECT
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3)
FROM
DUAL
CONNECT BY
LEVEL<=100000;
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SET AUTOTRACE TRACEONLY STATISTICS
SELECT
FROM
T4;
SET AUTOTRACE OFF
SELECT
SN.NAME,
SN.STATISTIC#,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SPOOL OFFWith 100,000 rows each containing about 12 bytes, what should the 'table fetch continued row' statistic show?
Before the insert:
NAME                      VALUE
table fetch continue        332
After the insert:
NAME                      VALUE
table fetch continue        332
After the select:
NAME                 STATISTIC#      VALUE
table fetch continue        252      33695The final test only inserts data into the first 4 columns:
DELETE FROM T4;
COMMIT;
SPOOL C:\TESTME3.TXT
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
INSERT INTO T4 (
COL1,
COL2,
COL3,
COL4)
SELECT
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3)
FROM
DUAL
CONNECT BY
LEVEL<=100000;
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SET AUTOTRACE TRACEONLY STATISTICS
SELECT
FROM
T4;
SET AUTOTRACE OFF
SELECT
SN.NAME,
SN.STATISTIC#,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SPOOL OFFWhat should the 'table fetch continued row' show?
Before the insert:
NAME                      VALUE
table fetch continue      33695
After the insert:
NAME                      VALUE
table fetch continue      33695
After the select:
NAME                 STATISTIC#      VALUE
table fetch continue        252      33695 My statement "Tables with more than 255 columns will always have chained rows." needs to be clarified:
"Tables with more than 255 columns will always have chained rows +(row pieces)+ if a column beyond column 255 is used, but the 'table fetch continued row' statistic +may+ only increase in value if the remaining row pieces are found in a different block."
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.
Edited by: Charles Hooper on Aug 5, 2009 9:52 AM
Paraphrase misspelled the view name "V$SYSSTAT", corrected a couple minor typos, and changed "will" to "may" in the closing paragraph as this appears to be the behavior based on the test case.

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

Is there any way to create table of more than 30 char length name

hi all,
Please tell me is there any way to create table of more than 30 char length name in oracle 10g
Regards

Hi,
If you want table name to be more than 30 Char.
I am sure,your naming convention is not upto the mark.
Its not possible in 10g as well as in 11g.
Thanks
Yogesh Nagle
India

How to print a graph in which internal table has more than 32 entries?

hiii experts
i am trying to make a line graph using 'gfw_pres_show' function module.
but in report internal table has more than 32 entries
so how can i print a graph having more than 32 entries?

Hi ricky_lv,
According to your description, there is main report and subreport in it, when the subreport spans across multiple pages, you want to show column headers on each page. If that is the case, we can set column headers visible while scrolling in main report.
For detail information, please refer to the following steps:
In design mode, click the small drop down arrow next to Column Groups and select Advanced Mode.
Go to your Row Groups pane, click on the first static member.
In properties grid, set FixData to True.
Set RepeatOnNextPage to True.
Here is a relevant thread you can reference:
https://social.technet.microsoft.com/Forums/en-US/e1f67cec-8fa3-4c5d-86ba-28b57fc4a211/keep-header-rows-visible-while-scrolling?forum=sqlreportingservi
The following screenshots are for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

How to create a table with more tan 20 columns

I created a A4 landscape document to make a calendar for the next year.
To add the date information I need to insert a table with 32 columns (name of month + 31 days). It should be possible to create a table with a over all width of 29.7 cm (consisting of 1 column of 4.9 cm and 31 columns with 0.8 cm)?
Remark: Yet reduced all indention's (? German: Einzug) and other spacers and the size of used font of the table.

Hello Till,
unfortunatly Pages connot create a table with more than 20 columns. This is no question of size or place.
But you can create two tables, set the most right border of the fist table to "no line" and align the second table (with the other 12 columns) at the right side of the first table. Now you have "one" table with 32 columns.
I have done this with my driving book (Fahrtenbuch, um es korrekt zu schreiben and it works fine.
Frank.

Populating more than one table and more than one field

I need some suggestions and this forum has always been a great source of good advice.
I have a web form at the following location: http://www.webdevpractice.com/genoptix/CE/register.php
Here's what the web form needs to do:
Send a confirmation email listing seminars the visitor checked on the form.
Create a similar message on a confirmation page.
Populate 2 two tables.
Items 1 and 2 are working fine.
The advice I need is on how to populate two tables in the database.
There are three tables:
ACCOUNTS
account_id
first_name
last_name
medtech_id
job_title
npi
company
city
state
email
phone
contact
ATTENDANCE
attendance_id
account_id
seminar_id
SEMINARS
seminar_id
seminar
speaker_first_name
speaker_last_name
date
The web form contains data that need to go into the ACCOUNTS table and the ATTENDANCE table. The challenge is getting the account_id and seminar_id into the ATTENDANCE table. If all the information was inserted properly, I could write a query that revealed who was taking what seminar.
Inserting data into the ACCOUNTS table is not a problem. I will create another form to insert information into the SEMINARS so that should not be a problem. But inserting the account_id and the seminar_id is what I am wondering about. Also, can more than one record be inserted in a table? If an user checks more that one seminar, each seminar (seminar_id) would need to be inserted in the ATTENDANCE table as separate records along with the account_id. I'm thinking I may have to do this manually. Also, the values for each seminar are their dates and titles. I used these as values to send the confirmations.
I'm just looking for advice at this point. Is this doable?

Bregent,
The table I am wondering about is the ATTENDANCE table. There are two fields in addition to the primary key: account_id and seminar_id. The field I am concern with is the seminar_id which comes from a group of checkboxs on the form. So, one form could create several records. For example, presently there are three seminars that are offered. If the visitor selects all three seminars, that would create three records in the SEMINARS table. So, it might look like this:
attendance_id     account_id     seminar_id
     1                    1                    1
     2                    1                    2
     3                    1                    3
My PHP skills are basic. I've done other forms and use PHP in other ways. But I have never had to populate several rows in one table with an array of checkboxes nor have I be able to find an example of this.
So the advice I am seeking (and perhaps this is premature) is this:
Can one field from a table populate more than one record?
Should I set up checkboxs as a group or individually with a different name?
I am also considering setting up my tables differently so there is a table from each seminar--that may solve my problem.

Table with more than 35 columns

Hello All.
How can one work with a table with more than 35 columns
on JDev 9.0.3.3?
My other question is related to this.
Setting Entities's Beans properties from a Session Bean
bought up the error, but when setting from inside the EJB,
the bug stays clear.
Is this right?
Thank you

Thank you all for reply.
Here's my problem:
I have an AS400/DB2 Database, a huge and an old one.
There is many COBOL Programs used to communicate with this DB.
My project is to transfer the database with the same structure and the same contents to a Linux/ORACLE System.
I will not remake the COBOL Programs. I will use the existing one on the Linux System.
So the tables of the new DB should be the same as the old one.
That’s why I can not make a relational DB. I have to make an exact migration.
Unfortunately I have some tables with more than 5000 COLUMNS.
Now my question is:
can I modify the parameters of the ORACE DB to make it accept Tables and Views with more than 1000 columns, If not, is it possible to make a PL/SQL Function that simulate a table, this function will insert/update/select data from many other small tables (<1000 columns). I want to say a method that make the ORACLE DB acting like if it has a table with a huge number of columns;
I know it's crazy but any idea please.

Spatial index creation for table with more than one geometry columns?

I have table with more than one geometry columns.
I'v added in user_sdo_geom_metadata table record for every column in the table.
When I try to create spatial indexes over geometry columns in the table - i get error message:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 8
ORA-06512: at line 1
What is the the solution?

I'v got errors in my user_sdo_geom_metadata.
The problem does not exists!

I want to enable a PK in a tables with more than 1680 subpartitions

Hi All
i want to enable a PK in a tables with more than 1680 subpartitions
SQL> ALTER SESSION ENABLE PARALLEL DDL ;
Session altered.
SQL> alter table FDW.GL_JE_LINES_BASE_1 enable constraint GL_JE_LINES_BASE_1_PK parallel 8;
alter table FDW.GL_JE_LINES_BASE_1 enable constraint GL_JE_LINES_BASE_1_PK parallel 8
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> alter table FDW.GL_JE_LINES_BASE_1 enable constraint GL_JE_LINES_BASE_1_PK parallel 8 nologging;
alter table FDW.GL_JE_LINES_BASE_1 enable constraint GL_JE_LINES_BASE_1_PK parallel 8 nologging
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> alter table FDW.GL_JE_LINES_BASE_1 parallel 8;
Table altered.
SQL> alter table FDW.GL_JE_LINES_BASE_1 enable constraint GL_JE_LINES_BASE_1_PK;
alter table FDW.GL_JE_LINES_BASE_1 enable constraint GL_JE_LINES_BASE_1_PK
ERROR at line 1:
ORA-01652: unable to extend temp segment by 128 in tablespace TS_FDW_DATA
Please advice or tell how it would be the best way to do this
Regards
Jesus

When you try to create a PK you automaticaly created an index. If you want to put this index in different tablespace you should use 'using index..' option when you create this primary key.

Trouble with the SQL smt to :list tables having more than 1000 rows

Please I trying to list only tables having more than 1000 rows, but the sql stmt below doesn't work, can someone gives me a tips
select table_name from user_tables where table_name in ( select table_name from user_tables where rownum > 1000 ) : The result is no rows!
But I know that I have at lest 50 tables having more than 1000 rows
Thanks a lot for the help

If your tables are reasonably analyzed, then you can simply query:
SELECT table_name,
num_rows
FROM user_tables
WHERE num_rows >= 1000This will give you quite a reasonable estimate.
Otherwise you have to go for dynamic sql or use the data dictionary to help you generate suitable scripts ....

Compressed tables with more than 255 columns

hi,
Would anyone have a sql to find out compressed tables with more than 255 columns.
Thank you
Jonu

SELECT table_name,
       Count(column_name)
FROM   user_tab_columns utc
WHERE utc.table_name IN (SELECT table_name
                          FROM   user_tables
                          WHERE compression = 'ENABLED')
HAVING Count(column_name) > 255
GROUP BY table_name

How can we create a table with more than 64 fields in the default DB?

Dear sirs,
I am taking part in the process of migrating a J2ee application from JBoss to SAP Server. I have imported the ejb project.
I have an entity bean with 79 CMP fields. i have created the bean and created the table for the same also. but when i tried to build the dictionary, i am getting an error message as given below,
"Dictionary Generation: DB2:checkNumberOfColumns (primary key of table IMP_MANDANT): number of columns (79) greater than allowed maximum (64) IMP_MANDANT.dtdbtable MyAtlasDictionary/src/packages"
Is it mean that we can not create tables with fields more than 64?
How can i create tables with more than 64 fields?
Kindly help,
Thankyou,
Sudheesh...

Hi,
I found a link in the help site which says its 1024 (without key 1023).
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/069940ccd42a54e10000000a1550b0/content.htm
Not sure about any limit of 64 columns.
Regards,
S.Divakar

Table breaking - More Newbie Q's

Similar Messages

Maybe you are looking for