Table BSID Partly active.

table BSID is partly active, does it affect the contents of the table.
when i read from bsid, for few customers i am getting all entries, for others i am getting few entries when i compare it with table bseg.
is it because of the table being partly active ? please suggest.

Yes Kranthi if upgradation on table is going on then this isthe only reason the status is partly active moreover this will definetly result in short dump whenever you try to access the table .You surely wont get the all the values or any values as whenever compiler execute the statement where database access is done it will result in the dump.
Please let the upgradation complete and then use the table moreover if you are appending some strucutre then first activate the structure through se11 ,then activate the table and finally adjust the table through se14.
If still table status doesnot change then contact the basis team for the same.
Pooja

Similar Messages

  • Table AMPL Partly active

    Dear ,Frds
    i have got one problem when i upgrade the system to 4.7 to ECC 6.0 a Error in between upgrade at the last moment the error is described as below
    DDIC and Activation Error S And return Code in SAP AAAA700.RDV
    IEEDO519 Table AMPL Could not be Activated.
    1ETP111 exit Code 8.
    we have Ignore this phase and also i have delete the Request in which the object is present or attached .after that when the upgrade is completed when creating a PO it will create a Dump when EDIT the PO.
    The Table Error is
    Transp. Table AMPL Partly active
    Short Description Table of Approved Manufacturer Parts
    Enhancement category Selected category inconsistent with implicit enhancement category
    Implicit Enhancement Category :- can be enhanced char type or numeric.
    Check table CI_AMPL
    Field MANDT does not lie within customer namespace
    Table CI_AMPL was checked with warnings
    Adjustment of active dependent objects
    TABL AMPL is inconsistent in active version
    Check table AMPL (DEV/14.07.09/00:04)
    Current enhancement category Can Be Enhanced (Char. Type) is incorrect
    The following enhancement categories can be selected:
    Can Be Enhanced (Numeric or Char. Type),Can Be Enhanced (Deep)
    Field MANDT in table AMPL is specified twice. Please check
    Foreign key AMPL-MANDT (foreign key was deleted)
    No data exists (structure change caused by DROP / CREATE)
    AMPL: Structure change at field level (DB is adjusted)
    Check on table AMPL resulted in errors
    TABL AMPL_ATTEMPTS is inconsistent in active version
    Check table AMPL_ATTEMPTS (DEV/14.07.09/00:04)
    Current enhancement category Can Be Enhanced (Char. Type) is incorrect
    The following enhancement categories can be selected:
    Can Be Enhanced (Numeric or Char. Type),Can Be Enhanced (Deep)
    Check on table AMPL_ATTEMPTS resulted in errors
    TABL VAAMPL was adjusted
    TABL VAMPL is inconsistent in active version
    Check table VAMPL (DEV/14.07.09/00:04)
    Current enhancement category Can Be Enhanced (Char. Type) is incorrect
    The following enhancement categories can be selected:
    Can Be Enhanced (Numeric or Char. Type),Can Be Enhanced (Deep)
    Check on table VAMPL resulted in errors
    regards Ritesh sharma

    Hi,
    Just check the CI_AMPL structure to see if the MANDT field is also specifed there.
    If yes then remove it.
    Check each and every include structure in AMPL and then activate the same.
    Finally adjust and activate the table via transaction SE14.
    This would solve your issue.
    Regards,
    Ankur Parab

  • Table partly active

    Hi in equi table , in ci_equi  i added custom fields and activated it is active fine
    but again i changed field data type of one field and it is showing table is  partly active
    can any one help how to procced to activate this table

    hi,
    go to the menu bar
    there goto UTILITIES -> DATABASE OBJECT ->DATABASE UTILITY-.>CLICK ON ADJUST DATABASE AND ACTIVATE (THE PUSH BUTTON RIGHT BELOW )
    CHEERS

  • Performance ME51 table EBKN partially active

    Hello group,
    we suddenly had a performance issue, and we found that suddenly table EBKN appeared as "patially active" in the database. After activating the performance problems were gone. But we have no clue as to how the table got the status "partially active" and what this means. We got no errors or warnings when activating.
    Doe sanyone have a clue as to what the cause is for the status "partially active"?
    Regards, Léon Hoeneveld

    Hi,
    > I've checked with SE01 Transport organizer if any transport contained table EBKN.
    it's not necessarily the table but could be one of the includes ....  .
    Partially active means that a part of the table (e.g. an include) was not active while the table (the part without the include) was active. You can try to find that part and search that in transports.
    In the cases i had i was like this.
    Regaring your performance problems: I wonder if they have to do with a partially activated table. Honestly i doubt it.
    Programs working on partially activated tables should either work or dump but i never heard of performance problems
    related to partially activated tables....
    Kind regards,
    Hermann

  • Ps partly active

    Dear Experts,
    We have created one custom infotype in development server & deleted the infotype. Now we r uploading patch in dev. server, which is giving an error message pbxxxx is parlty active and if we activate, it is giving a message that psxxxx does not exist.
    What can we do to remove the error message.
    In the below mentioned two points which is the one which will not affect my patch upload and smooth functioning.
    1) To create a infotype so that the error will go or
    2) To delete the existing partly active table pbxxxx.
    Regards,
    Goldy

    tell me how you did delete your custom infotypes?
    not only delete using tcode PM01 - tab "IT", input infotype number, click PS Structure - Edit
    to delele the fields and the component inside
    but you also needs to use tcode PM01 - tab "Delete IT"
    and you will have confirmation
    thanks and best regards
    dhenny muliawaty (pei pei)

  • Bseg partly active

    I append a structure in bseg table .
    but when i activate the structure its become partly active and
    the table bseg also become partly active.
    can anybody tell how to activate the table and structure??
    i am not able to activate it through SE11.
    regards,
    Piyush Jain

    Goto-->SE14-->Table(BSEG)--->Activate and Adjust database(Click).
    OR.
    SE11-->Utilities(Menu)-->Database object-->Database Utility-->Activate and Adjust database(Click).
    Regards,
    Gurpreet

  • Open items in table BSID

    I want to find the open items in table BSID, how should I do?
    Try to ask a specific question. Everything in BSID is open (or not open item managed).
    Edited by: Rob Burbank on Apr 26, 2009 10:57 PM

    Hi Maulik,
    Dicsount he can take can be calculated from the payment terms..
    Discount he had takend should can be calculated only after the payment is recd. It is directly stored in the tables.
    Hence to meet your requirement, you would need to develop a report with the above fields in place.
    Hope its clear for you now..
    Good Luck!
    Lucid-Mind....

  • Table name for ACTIVITY

    Hi,
    How to get the activity for a given network number in the transaction CJ20N.
    Plz give me the table name and field name..

    check out table afvc
    vornr(activity number) and ltxa1(activity desc)
    pk
    Edited by: prashanth kishan on Sep 5, 2008 11:50 AM

  • PS tables for Network Activity elements

    Hi,
    I am trying to find the tables for Network Activity elements and its relationship with Activity (PS Module).
    There are Std BAPIs to get the data.
    But I want the table field names since it would be used by the XI team for data mapping.
    Thanks in advance

    Hi Pranav
    Thanks for yr information. we can select the object WBS, and shall be able to view PS texts in overview and create PS Texts.
    My requirement rather, question is, can we attach any documents without having DMS. ie., can we assign any of the Windows document which are available in hard disc?
    please thorough some light on this and thanks in advance and belated happy diwali wishes to you.
    Thanks
    Sudhakar

  • Need to activate Tables during DDIC Activation Phase

    Hi Experts,
    I am trying to import support packs from SAPKB70009 to SAPKA70011 in a fresh ECC 6.0 IDES Installation. During the DDIC activation phase it got stuck. Request you to please help me with the activation of following tables:
    Table YCRM01_S_BUPM could not be activated
    Table YTEL01_S_BUPM could not be activated
    Table ZICMAG_S_BUPM could not be activated
    When I checked in SE11, the above tables are already active in state.
    I have found one link on forum:
    support package error
    Tried activating RATE component too, but after saving and trying to activate, got following error message:
    TABL YCRM01_S_BUPM was not activated
    Check table YCRM01_S_BUPM (BASIS/31.07.10/14:29)
    Field RATE: Component type or domain used not active or does not exist
    Nametab for table YCRM01_S_BUPM cannot be generated
    Check on table YCRM01_S_BUPM resulted in errors
    I have noticed that the component RATE is containing Component Type PRP_RATE without any definition for Data Type and description. I believe the missing definition here is the source of not able to activate the table here.
    Any suggestions? Please help.
    Thanks and Regards,
    Naresh.
    Edited by: naresh_nmi on Jul 31, 2010 12:22 PM

    Hi,
    I created manually PRP_RATE as data element and gone ahead with the imports of Support Package. DDIC activation phase passed through.
    Regards,
    Naresh.

  • Table s804 not active in dictionay

    Hello,
    Please help me: what can I do if I get the message "table s804 not active in dictionary"? Thank you!
    Regards,
    Ileana

    Hello Ileana,
    I've never seen "???" in an information structure (IS), or in the corresponding database table. Where do you get it? In SE11 for the database table, or in MC23 for the IS?
    The IS are based on so called communication structures (e.g. MCIPM and MCIQF for the Plant maintenance information structures). Have you enhanced the communication structures for your application? If so, perhaps you have transported the IS and the field catalogues, but not the enhancement of this communication structures?
    The (IS) is a self defined inforstructure. Correct?
    For which type of application have you defined it (you can find it in transaction MC23, when you display the IS).
    Where do you get the error message?
    Only some questions to locate the error.
    Best regards
    Stephan

  • Realignment table cannot be activated - help needed - Very urgent

    Hi All,
         Iam new to SCM and in the process of learning it. Iam trying to work with the realignment transaction /sapapo/rlgcopy. When i try to create a table , after characteristics selection it gives error "Realignment table cannot be activated". How do i proceed from there. Please help.
    It would be helpful if somebody could send a link that explains realignment steps in detail. I tried help.sap.com , but could not understand clearly. Kindly help

    Hi...
    As mentioned earliar reply...
    Hope you are having Authorization of realianment transaction...
    Transaction
    /SAPAPO/RLGCOPY - Data Realignment
    Check that you have selected Realianment button
    entered the planning object structure name
    You have created table/change table
    selected char to be ralianed
    and then maintained entries

  • Realignment table cannot be activated

    Hi
    When trying  to create relaignment table i am getting message "Realignment table cannot be activated " . Please suggest how to fix

    Please check if you have the CVCs and time series generated and the Planning area is initialized. If everything looks good then you need to check your authorization

  • AUFK table partly active

    Hi All,
    As part of a user exit implementation, I tried to add 2 custom fields and i standard field AUFPL in customizing include CI_AUFK of database table AUFK. Since then it is not getting completely activated. I even tried to Adjust the database using database utility.
    Any pointers in this regards are highly appreciated.
    Thanks & Regards,
    Shreya
    Edited by: Rob Burbank on Apr 21, 2010 3:58 PM

    Hi All,
    I have found the solution to this issue. The runtime object of AUFK was getting deleted for unknown reasons. That is why it was not even getting activated and adjusted using Database utillity (SE14).
    Solution: - Login to SAP Client 000 (Master Client) with DDIC and run database utility there. Try to activate and adjust the database table from there only. It will reset it according to the SAP standards and will activate it.
    Also, if in process of adjusting it you have deleted the database table, though the data can be recovered using back up and re-do logs, the views and secondary indices also get deleted and wont get created even by adjusting it with DDIC id in client 000. In this case, use transaction DB02 to carry out the checks between Data - Dictionary and Database. You will find missing objects in database here. Go to se14 and create each object separately. Failing to do so can result in dumps in standard transaction. (Deleting table method is highly not recommended, should be the last option when everything else is failed).
    Hope this information will be of some help to you.
    Cheers,
    Shreya

  • Truncate TABLE PSA table-index part

    Dear all,
    I have a doubt about the truncate action on BW of PSA table.
    To speed the activity and empty some tablespace I have truncated for example the PSA /BIC/B0000025000 and all table and index parts have emptied, so, on the contrary of disk space, the table part and index part from 00001 to 00050 for example are no longer used and the next uploads creates partition 00051.
    The question is: I must drop all index and table part previously emptied?
    If yes a must keep in mind some indications?
    I could have some problem to leave this table and index part empty, for example about performance or inconsistence?
    There is some contraindication to truncate PSA?
    Can i use program 'RSAR_CLEANUP_PSA_DIRECTORY' to delete its?
    Thanks for your help.
    Best Regards
    Daniele

    Hi Kaushal,
    thanks for your answer.
    I have executed program mentioned in oss note 733371.
    After the execution of RSAR_PSA_CLEANUP_DIRECTORY
    some errors have found:
    in the head of log there are this two entries:
    Fatal error occured, DO NOT USE correct option
    For errors 'wrongly present in partition' refer to NOTE 849857 / 992248
    the rest of log this kind of errors:
    Request : ODSR_47KKTL3NMVNZPGY17C4POEYAV  missed in partition  0015
    The oss note 849857 is for release lower of mine, the note 992248 is for my release, its talks about a program 'SAP_PSA_ZEROCORRECT' imported automatically with SP 11, i have level 13 os SP BI but i didn't find that program,
    do you have some idea about that?
    After execution of report RSAR_PSA_CLEANUP_DEFINITION (only check)
    I have this error:
    No DDIC Table Exists for PSA: ZEDS_NOT_T_BA Vrs. 000
    There Is No Active DDIC Table: /BIC/B0000852000
    Do you think that if i run RSAR_PSA_CLEANUP_DEFINITION  with repair object i can resolve all my problem visualized for report RSAR_PSA_CLEANUP_DIRECTORY either? Or before in must execute RSAR_PSA_CLEANUP_DIRECTORY whit repair option?
    Thanks for your help
    Ciao

Maybe you are looking for