Table cell Borders not appearing

I am creating a basic table style. I want a header row that
has shading, with headings in bold and centered. When I create a
table style, this is no problem to set up.
I want the rows underneath the header to all have plain black
1-pixel vertical and horizontal borders. When I edit the table
style, it lets me have vertical or horizontal borders, but not
both. If I select to have horizontal, it puts them in. Then if I
select vertical, it removes the horizontal. When I click on Whole
Table, it doesn't change. It doesn't apply the borders to all the
cells.
I appreciate any help anyone can give me!
Thanks,
Kathleen Baine

This process is not intuitive.
Try this to understand how it works.
With Apply formatting to: Whole Table, change the border
colour to red.
You will see just the border for the Whole Table change, that
is the outer border.
Without exiting the editor, change "Apply formatting to" even
rows. Note the colour picker will change and so will the border
size in the Border controls. Change that to what you red and 1px as
well, now do that for for odd rows.
I think by now you will be getting the hang of it.
Post back if still in trouble.

Similar Messages

InDesign Table Cell Strokes not appearing perfect

How do you get row and column strokes in a table to appear perfectly joined? When I choose "Column Strokes in Front" (Under Table Setup) i still see a tiny row stroke, and vice versus.. it's really visible in the PDF almost can't see it in InDesign though you can a little...

Thank you, although I doubled and even tripled checked the blue highlighted cell option and they visibly appear to be selected and in blue color, but when printed not the case.
This document is a product catalog, 50 plus pages and I have about 15 of those pages not showing the stroked edge. So that is why I thought, perhaps something was blocking the edge and arranged the table to the front with hopes of a difference, but that too failed. I am turning grey by the minute.

Table cell borders not always visible

I created a PDF out of an existing Word doc. The doc is a table. The visibility of the table borders is unpredictable in the PDF. At certain zoom levels some disappear/reappear, and there doesn't seem to be a consistent pattern or behavior. Any thoughts?

This process is not intuitive.
Try this to understand how it works.
With Apply formatting to: Whole Table, change the border
colour to red.
You will see just the border for the Whole Table change, that
is the outer border.
Without exiting the editor, change "Apply formatting to" even
rows. Note the colour picker will change and so will the border
size in the Border controls. Change that to what you red and 1px as
well, now do that for for odd rows.
I think by now you will be getting the hang of it.
Post back if still in trouble.

Lines in shaded table cells do not render properly in pdf created in Word 2010

When creating a pdf with shaded table cells using MS Word 2010; the black lines in the shaded table cells do not show up when looking at the page at a fit page view (anything under around 60%). They print, they are there when I zoom in, but will not show up if you zoom out.
I read a forum post in Adobe here which gave some really logical suggestions, but they didn't seem to work for everyone or the level of effort was not what i can put into it. I also tried some of those and variations of those; but they didn't seem to work.
http://forums.adobe.com/thread/305508
Did anyone come up with a solution? Some people were saying it's a bug in pdf software, if that is the case, has anyone heard of a resolution?
I'm using Windows 7 and word 2010 btw, to create the pdf.
Thanks!!

Just as a test, have you tried the MS plugin for PDF creation? I have found with other versions of WORD and Acrobat that PDF Maker and the MS plugin can both fill in dots and dashes on vector graphics (basically what the border is) and yet it comes out correctly with printing to the Adobe PDF printer. Unfortunately I do not have a solution. In my case, it seemed to be related to the vector graphic itself (I could import it to InkScape or other vector graphic tool and save to EMF and it then worked fine. It may be something that MS themselves have messed up in OFFICE 2013. Good luck.

Cell border not appearing in Adobe forms

Hi,
We Placed a button in internal table cell and itu2019s property is set to invisible.
This button is set to visible based on value of other column value in the same row of table.
But border for the cell is not coming when button is invisible.
Note: the button size is equal to cell size and so when we make the button invisible ,the cell border itself is not appearing as the whole cell is invsible.
How make the cell border visible even the button in that cell is invisible.
Please put your suggestions in this regard.
Regards,
Kranti Yamparala.

Hi Kiran,
Please go through the below link:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2dbb13d79f3446e10000000a155369/frameset.htm
Here the method to hide the toolbar is given. Try passing ABAP_FALSE in method: lr_method_handler->set_hide_toolbars( abap_false ) if it works.
Regards,
Vaibhav

Want Flash movie to scale with table cell. NOT WORKING!

Greetings;
I have authored a Flash movie and it is working fine. When I
use the html page output by Flash it scales fine but when I cut and
paste this code into a table cell the movie will not scale (in
Firefox) and not showup at all in IE 7.
Help appreciated. Here is the html page output by Flash:
http://www.howardbakerphotography.com/gallery/bakerGallery.html
(Scaling fine)
Here is the content placed inside a simple table cell:
http://www.howardbakerphotography.com/gallery/index3.php
(Only shows up small not scaling)
Help appreciated.
Rip

Found the solution myself! It appears the problem was in the
document type I was declaring:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
*The above was preventing my Flash from scaling when placed
in a table cell. When I changed it to:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN" >
It worked fine.
I'd be curious to know a little more about this problem if
anyone else has some insight ...
Is this document type I've gone to now an older one and going
to eventually go away?
Rip

Cell borders not expanding using nested subforms

I have an existing form whose table was created using subforms (not a table object). I found this post which addresses my issue: Cell Borders in tables of adobe form. However, I'm still having an issue and I'm hoping someone can point me in the right direction.
The subform 'ITEM' contains 12 columns. I wrapped column 12 into a subform and named it Subform12. I then wrapped column 11 and Subform12 into a subform and called it Subform11. I continued to do this for the remaining 10 columns. I removed the borders for each individual column and instead set the border for each SubformXX. I also selected 'Auto-Fit' for the height for each SubformXX. The sixth column is the column that can contain multiple lines of text. After doing this the first 6 columns expand correctly, however, the last 6 do not.
Can someone please tell me what I'm missing?
Thanks!
Julie

Hi Julie,
Can't you just do the following:
For the first cell (the one with the large amount of text), you but on the right border
You take this cell together with the next one and put it into a flowed subform with the right border
Then you take this subform together with the next one:
Repeat number 3:
Kind regards,
Niels De Greef

How do I remove unwanted table/ cell borders in firefox

I just built my website in dreamweaver. When I preview it, it
looks fine in both firefox & safari. However when i post and
view my site online, i see unwanted cel borders in firefox...I've
already checked the code and the border is set to 0 - any help is
much appreciated
thanks! Maura

Hi Maura,
Nice site and great art!
I see the borders in firefox but not in internet explorer.
I'm no expert on this, but have you tried altering the cell
padding and cell spacing value - for example, both to zero? Does
this help?

New columns in the table control do not appear

Hi,
We have a requirement to add two fields(columns) in a table control for a transaction upon clicking Create button and those two fields should be editable. We have added the two fields in the table control. But, they do not appear in the transaction ( If I delete an existing column, then I am able see the new column). Have checked everywhere, but not sure if I am missing something here. There is no hide statement used.
Appreciate help on this.
Thanks,
Pavan

Hi Pavan,
What I understood is you are adding fields to the table control dynamically.\
For that you have to use field-symbols to add fields to the work area dynamically.
( If this is not your actual requirement share your code with me I will try to solve it. )
Regards,
Swaroop

Smartform window borders not appearing in dot matrix printer Epson FX-1170

Hi all. I have a smartform with boxes (made out of windows and its borders) and texts inside those boxes. In the print preview, it shows the window borders. However, when the actual printout comes, the window borders do not appear. I have tried to change the 'output options' of the windows - I tried using millimeters, centimeters, point, lines, as well as inches, for the unit and also tried changing the width, but it still doesn't appear. Has anyone encountered a similar problem with dot matrix printers? Please help.

Hi,
the dot-matrix printers cannot "draw" lines and pictures, so, it is not capable of drawing the vertical and horizontal lines you have defined in the smartform windows. I think that you need to write the horizontal lines using the '-' or '_' characters but I am not sure about the vertical ones. Of course, as you realize, this requires big development effort.
Regards,
George

4EA3 external table default directory not appearing

In using SQL Developer 4 Early Adopter version 3, I was attempting to set up an External Table. I created the appropriate directory object, but it did not appear in the pulldown for default directory in the create External Table dialogue. I was able to proceed using SQL Developer 3.2. Once I created the table in SQL Developer 3.2, I was able to edit it in SQL Developer 4.

There is a bug here in that the Dialog for the default directory should not include default directory schema (which for me defaults to the connected one). As a workaround if you change that default directory schema to SYS in the drop down then you should see your directory.

How to remove table cell borders

Hi,
I’m using dreamweaver cs6.first i create a HTML page then i create a div tag (800w 900 h) & create a table inside of above div. i want to keep table border & make it to tickness, want to remove cell borders. I can’t find any options to remove the cell borders. Please any one can help me.
Thank you.

table.borderless {
border-width: 0px;
background-color: white;
font-family: Verdana, Arial, Helvetica, sans-serif;
font-weight: bold;
font-size: 1.2em;
text-align: center;
text-transform: none;
table.borderless th {
    border-width: 0px;
    padding: 5px;
    background-color: white;
table.borderless td {
    border-width: 0px;
    padding: 5px;
    background-color: white;
<table width="250" height="150" align="center" class="borderless">
<tr>
<th colspan="2" class="style1">Borderless table<br />
   cell 1 & 2 merged</span> </th>
</tr>
<tr>
<th class="borderless">cell 3 </th>
<td class="borderless">cell 4 </td>
</tr>
<tr>
    <th>cell 5 </th>
    <td>cell 6 </td>
</tr>
</table>

How to turn table cell borders on

No matter what I do, certain cell borders are turned off and they have different thicknesses. I want all borders of all cells in all tables in the page always turned on. I can't see any way to do this in CS6, the border button has disappeared. If it helps the cells can span multiple columns and/or rows. I don't see any difference in the source code for old tables created in a previous version and new tables.

CSS code:
table td {
border: 1px solid #CCC; /**adjust values as desired**/
Nancy O.

Shadows and Borders Not Appearing

When I publish my page, certain things are not appearing. For example, the drop shadow behind the lettering and the border around the photo(s) is not showing up. It shows up when I construct my page using iWeb, but not when I view the page using Safari.
Any suggestions? Thanks!

I know you can, but I'm not savvy enough to tell you how. Some of the local talent will check in pretty quick, & let you know. They're really very good

Table cell boarders re-appearing

Hi -
Has anyone run into an issue where they remove the boarder around a cell only to have it re-appear the next time you open the layout template? If so, did you find a way around it?
Thanks
- CC

I was thinking that it could have to do with nesting tables in Word, but I'm not 100% sure on that. I created a new template and the issue isn't occurring anymore. I don't really care for the randomness of issue though.
-CC

Table cell Borders not appearing

Similar Messages

Maybe you are looking for