Table cell color in webdynpro for ABAP

Hai,
I need to differentiate some table cell values using color change or some other way.
while populating table values, I have a field like mandatory or optional. According to mandatory field, I need to chage color the text of the another column in the same table called "name".
Another help about the table cell popin, I have a column name like "Name" in the table like link to action. If a person clicks on any of the "name" cells, the descriptive value should come as table cell popin.
If you have sample code, that will help me lot.
Thanks,
I will reward points any type of helpful answer.
Tamil

Hi,
did you take a look at the information under http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/ac884118aa1709e10000000a155106/frameset.htm and WDR_TEST_TABLE in the system?
Regards, Heidi

Similar Messages

Issue regarding cell action in webdynpro for abap alv

hello gurus,
       i have one requirement in webdynpro for abap alv.i have one alv table in that i have one coloun employee name.
for that i have provided F4 help and that is editable field.if i select value from F4 help it is getting value correctly and it is showing properly at the same time it is allowing values entered manually insted of from F4 help.but as per my requiremnet it should not allow any manually entered values.how can i get this functinality. i am not aware indepth od WDA.
could you go through my isssue and could you revert me some solution.
thanks in advance.

Hi,
   I dont think this is possible because when you can change the value using F4 then it would obviously be
   possible to enter manually.
   You can try using a drop down instead because in drop down you cannot enter values manually,
   But this would be good if the values that can be shown in drop down are very low, if the values are more
   then again user will face problems selecting values.
   Else you can try out what srinivas suggested, But dont know whether we can have two cell editors at a time
   inside a single cell of ALV. Please post the answer if you have found any other way to do it.

Table element referesh in webdynpro for abap UI layout

Hi all,
we are implementing a tree structure in webDynpro where we are facing a problem while selecting and deselecting all the child nodes
of a particular node.The backend for this is ABAP.
We are successful in selecting all child nodes on checking a particular node. But problem is when we are unchecking the same node, all its child nodes are deselected in the back end but in the screen its child nodes are still showing checked.
And if we refresh the screen, those child nodes are deselected on refreshing the screen. pls show a way such that we can deselect all child nodes on unchecking the node.
Now I am thinking like we have to refresh the screen on calling the deselect BAPI. pls suggest.
pls kindly give helpful replies. Its of high priority.
Thanks, awaiting for early replies.
Hema.

How did you solve your problem ?

How to create an editable table in webdynpro for ABAP? Help!

Hi Experts,
I have a requirement where I have to create a webdynpro for ABAP table for new row/rows entry, delete row/rows and update row/rows data. This is something like table control in normal ABAP.
how can I achieve this? Is there any such feature in ALV component?
Any code sample will be really helpfull.
Please help!
Thanks
Gopal

Hi,
yes, the ALV is integrated into WDA, have a look at this: http://help.sap.com/saphelp_nw2004s/helpdata/en/74/fd4142646ab46be10000000a155106/frameset.htm
Regards, Heidi
PS: look at the WDA Knowledge Center under https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943, there you can find several ALV tutorials
Message was edited by: Heidi von Geisau

In webdynpro for ABAP alv table issue

hello gurus,
 i am new for webdynpro for ABAP.i strucked at one point at designing time.anybody could you suggest me on this.
thanks in advance.
let me explain my scenario first.
in my webdynpro for ABAP developement i have one alv table having ten fields.i am featching the data for eight fields from one Ztabale and updating , for rest of two fields we need to fill after displaying output using the respective F4 help. Right now these two fields are in input editable mode.now i am getting the values successfully from F4 help and at the same time it is allowing MANUAL ENTRIES also but as per my requirement it should not allow any manual entries . for this i have made these two fields are in readonly mode as like as rest of fields to avoid the MANUAL ENTRIES but at this time i didnot get any F4 helpfor those two fields.
so how can i achive my goal in this thing could any one suggest me.
my final conclusion is we need to get only F4 help values into those two fields . it should not allow any manual values at any point of time.
best regards,
babu

ya hi harshit,
 my self also used same code in my action part . here i have one table with four fields carrid , connid , fldate , price.
for carrid i have created freely programmed search help.but if it is in display mode there is no F4 help in enable mode.
in context for attribute carrid
DATA lo_nd_flight TYPE REF TO if_wd_context_node.
DATA lo_el_flight TYPE REF TO if_wd_context_element.
DATA ls_flight TYPE wd_this->element_flight.
DATA lt_flight TYPE wd_this->elements_flight.
navigate from <CONTEXT> to <FLIGHT> via lead selection
lo_nd_flight = wd_context->get_child_node( name = wd_this->wdctx_flight ).
select connid fldate price from sflight into CORRESPONDING FIELDS OF TABLE
 lt_flight UP TO 20 ROWS.
@TODO handle non existant child
IF lo_nd_flight IS INITIAL.
ENDIF.
get element via lead selection
lo_el_flight = lo_nd_flight->get_element( ).
alternative access via index
lo_el_flight = lo_nd_flight->get_element( index = 1 ).
@TODO handle not set lead selection
IF lo_el_flight IS INITIAL.
ENDIF.
get all declared attributes
lo_el_flight->get_static_attributes(
 IMPORTING
 static_attributes = ls_flight ).
CALL METHOD lo_nd_flight->bind_table
EXPORTING
 new_items = lt_flight
 set_initial_elements = ABAP_TRUE
 index =
DATA: lo_cmp_usage TYPE REF TO if_wd_component_usage.
DATA: lo_interfacecontroller TYPE REF TO iwci_salv_wd_table.
 instantiate ALV component usage if necessary
lo_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
 lo_cmp_usage->create_component( ).
ENDIF.
 pass reference to data node to instance of ALV usage
lo_interfacecontroller = wd_this->wd_cpifc_alv( ).
lo_interfacecontroller->set_data( r_node_data = lo_nd_flight ).
Configure ALV
DATA lr_config TYPE REF TO cl_salv_wd_config_table.
lr_config = lo_interfacecontroller->get_model( ).
**declerations
DATA: lt_columns TYPE salv_wd_t_column_ref,
 ls_columns TYPE salv_wd_s_column_ref,
 lr_input TYPE REF TO cl_salv_wd_uie_input_field,
 name TYPE string,
 lt_node_info TYPE wdr_context_attr_info_map,
 ls_node_info TYPE wdr_context_attribute_info,
 lv_tabix TYPE sy-tabix,
 lr_info TYPE REF TO if_wd_context_node_info.
TYPES: BEGIN OF ty_name,
 name TYPE string,
 END OF ty_name.
DATA: lt_name TYPE TABLE OF ty_name,
 ls_name TYPE ty_name.
**for getting node info
*Get the context node information
lr_info = lo_nd_flight->get_node_info( ).
lt_node_info = lr_info->get_attributes( ).
LOOP AT lt_node_info INTO ls_node_info.
 CASE ls_node_info-name.
 WHEN 'CARRID'.
 ls_name-name = ls_node_info-name.
 APPEND ls_name TO lt_name.
 WHEN 'REGIONALOFFICER'.
 ls_name-name = ls_node_info-name.
 APPEND ls_name TO lt_name.
 WHEN 'INSPECTORNAME'.
 ls_name-name = ls_node_info-name.
 APPEND ls_name TO lt_name.
 ENDCASE.
ENDLOOP.
*Logic for Table Horizontal Scrolling
lr_config->if_salv_wd_table_settings~set_visible_row_count( 13 ).
" lr_config->if_salv_wd_table_settings~set_width( '1085' ).
lr_config->if_salv_wd_table_settings~set_width( '100%' ).
lr_config->if_salv_wd_table_settings~set_scrollable_col_count( 8 ).
" lr_config->if_salv_wd_table_settings~set_fixed_table_layout( abap_true ).
lr_config->if_salv_wd_table_settings~set_first_visible_scroll_col( 'CARRID' ).
lr_config->if_salv_wd_table_settings~set_cell_action_event_enabled( abap_true ).
Set the table editable .
DATA: lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= lr_config.
lr_table_settings->set_read_only( abap_false ).
lr_table_settings->set_read_only( abap_true ).
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
 lr_column TYPE REF TO cl_salv_wd_column.
DATA: lt_string TYPE STANDARD TABLE OF string,
 ld_string TYPE string,
 ld_int TYPE i,
 lv_index TYPE i.
Make few columns editable and attach inputfield, if permitted.
 DATA lr_input_field TYPE REF TO cl_salv_wd_uie_input_field.
 CLEAR lt_string.
 APPEND 'CARRID' TO lt_string.
 LOOP AT lt_string INTO ld_string.
 lr_column_settings ?= lr_config.
 lr_column = lr_column_settings->get_column( ld_string ).
 CREATE OBJECT lr_input_field
 EXPORTING
 value_fieldname = ld_string.
 lr_input_field->set_read_only( abap_true ).
 lr_column->set_cell_editor( lr_input_field ).
 ENDLOOP.
 CLEAR lt_string.

Can we Change the backround color of an Input field in Webdynpro for ABAP.

Hi Experts ?
Can we change the background color of an Input field in WebDynpro for ABAP based on results we receive from any function module or BAPI?? .
Thanks in advance .
Regards ,
LAS

Yes. We can change the background of an input field. The way you do this is by editing the theme that webdynpro application uses. To edit the theme, you will need to install NWDS PLUS the theme edit plugin (Available for download from SAP).
Once you have edited the theme, you will need to upload your theme back to application server. You can use the program : BSP_UPDATE_MIMEREPOS to do this.
Bydefault, the theme used by webdynpro applications is :
/SAP/PUBLIC/BC/UR/nw5/themes/sap_tradeshow
You can apply another theme by calling the webdynpro application with a theme parameter. For example, if my webdynpro application name is "zgopaltest", then
http://<server>:port/sap/bc/webdynpro/sap/zgopaltest?SAP-EP-THEMEROOT=/SAP/PUBLIC/BC/UR/nw5/themes/sap_tradeshow
will apply the sap_tradeshow theme.
Likewise, you can apply diffrent theme. There is another theme that SAP provides. Its called : sap_hcb. Hence, you can apply the theme to the above application by:
http://<server>:port/sap/bc/webdynpro/sap/zgopaltest?SAP-EP-THEMEROOT=/SAP/PUBLIC/BC/UR/nw5/themes/sap_hcb

How to make cell editable alv in WebDynpro for ABAP?

I make Column editable ALV.(See under source code)
But I can't make Cell editable ALV.
How to make Cell editable ALV in WebDynpro for ABAP?
and..how to get changed data?
DATA: l_value TYPE REF TO cl_salv_wd_config_table.
l_value = l_ref_interfacecontroller->get_model( ).
* { EDITABLE
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
        lr_input_field     TYPE REF TO cl_salv_wd_uie_input_field,
        lr_column          TYPE REF TO cl_salv_wd_column.
lr_column_settings ?= l_value.
lr_column = lr_column_settings->get_column( 'TOTAL_COUNT' ).
CREATE OBJECT lr_input_field
    EXPORTING
      value_fieldname = 'TOTAL_COUNT'.
lr_column->set_cell_editor( lr_input_field ).
DATA: lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= l_value.
lr_table_settings->set_read_only( abap_false ).

the code seems to be correct....but where are you writing it?
put the code in the wddoinit method and it should work.
have a look at this article..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3133474a-0801-0010-d692-81827814a5a1

How can i read local excel file into internal table in webdynpro for abap a

Could someone tell me how How can i read local excel file into an internal table in webdynpro for abap application.
thank u for your reply

Deep,
File manuplations...............................
1. At the presentation level:
->GUI_UPLOAD
->GUI_DOWNLOAD
->CL_GUI_FRONTEND
2. At the application server level:
->OPEN DATASET : open a file in the application server for reading or writing.
->READ DATASET : used to read from a file on the application server that has been opened for reading
-> TRANSFER DATASET : writing data to a file.
-> CLOSE DATASET : closes the file
-> DELETE DATASET : delete file
If file is on the local PC,use the function module GUI_UPLOAD to upload it into an internal table by passing the given parameters......
call function 'GUI_UPLOAD'
exporting
filename = p_file
filetype = 'ASC'
has_field_separator = '#'
tables
data_tab = t_data
p_file : excel file path.
t_data : internal table
reward points if useful.
regards,
Vinod Samuel.

Webdynpro for ABAP treeBynesting table column Usage

Hi Experts,
I am trying to use treeByNesting table column in webdynpro for ABAP.
Can anyone please share me the code.
I am not getting how to use the recursive node.
I need to develop a tree structure whose leaf if determined at run time, so thought to use this UI element. But right now I am getting an error like : ASSERTION FAILED.
Please suggest how to use recursive node and how to load the child.
Regards,
Kalyani.

Hello friend,
I think these links will help you much in solving your error.
Please visit these links,
http://wiki.sdn.sap.com/wiki/display/WDABAP/WebDynProABAPApplicationusingTreeand+Frame
http://www.****************/Tutorials/WebDynproABAP/Tree/Page1.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/21/ad884118aa1709e10000000a155106/content.htm
Thanks,
Sri Hari

Webdynpro for ABAP - Textdirection top - bottom ???

Hi all,
is there any ui-element which enables textdirection top -> bottom or supprts HTML tags to realize this simple requirement ????
Thx !!!

I understand this, but if you implement right->Left and Left->Right you should also think about top->bottom & bottom->top, also there is a FormatedTexView with some HTML support but this has no style and can't be embedded as a Celleditor into the ALV... And also the fixed colors for ALV Cells i don't understand why there should be a limitation of colors for cells in CL_WD_TABLE_COLUMN=>E_CELL_DESIGN
I really like and enjoy the WebDynpro for ABAP concept but sometimes i feel really sad for such limits like i mentioned because that is basic layout stuff.....

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Excel File Upload In Webdynpro For ABAP

Hi All,
I have a doubt regarding EXCEL file upload for Webdynpro for ABAP.
I am able to get the path of file using 'FILEUPLOAD' UI element.Now I need to upload the EXCEL file into ALV.I have tried out with GUI_UPLOAD and other excel upload function module.But these Function Module throws Dump.
Can you please suggest how to go about it.It will be a great help if u can suggest any function module or method.

Hi Amita,
Insetad of using GUI_UPLOAD use 'HR_KR_XSTRING_TO_STRING'
Here is the sample code,
TYPES :BEGIN OF str_itab,
              name(10) TYPE c,
              age(10) TYPE c,
             END OF str_itab.
DATA : t_table1 TYPE STANDARD TABLE OF str_itab,
       i_data TYPE STANDARD TABLE OF string,
               lo_nd_sflight TYPE REF TO if_wd_context_node,
                lo_el_sflight TYPE REF TO if_wd_context_element,
                l_string TYPE string,
        fs_table TYPE str_itab,
                l_xstring TYPE xstring,
fields TYPE string_table,
lv_field TYPE string.
DATA : t_table TYPE if_main=>elements_data_tab,
data_table TYPE if_main=>elements_data_tab.
* get single attribute
wd_context->get_attribute(EXPORTING name = `DATASOURCE`
                          IMPORTING value = l_xstring ).
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
EXPORTING
in_xstring = l_xstring
IMPORTING
out_string = l_string.
SPLIT l_string AT
cl_abap_char_utilities=>newline INTO TABLE i_data.
* Bind With table Element.
LOOP AT i_data INTO l_string.
SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE
fields.
READ TABLE fields INTO lv_field INDEX 1.
fs_table-name = lv_field.
READ TABLE fields INTO lv_field INDEX 2.
fs_table-age = lv_field.
APPEND fs_table TO t_table1.
ENDLOOP.
lo_nd_sflight = wd_context->get_child_node( 'DATA_TAB' ).
lo_nd_sflight->bind_table( t_table1 ).
ENDMETHOD.
if correct give correct answer
Thanks & Regards,
Meenachi.R

Need to create a Calender in WebDynpro for ABAP

Hi,
Tcode SSC1 displays owner's calender. I need to create same calender in WebDynpro for ABAP. I couldn't find any standard component usage for the same. Is there any component usage for the same or is there any altenative to create the same?
It's quite urgent.
Thanks,
Mahesh

Hi
You have to use DateNavigator Control to get the left hand side screen in SCC1 and
for the right hand side one you have to work with table Control
for Date Navigator UI control see WDR_TEST_EVENTS
and to get the right hand side screen see WDR_TEST_TABLE see the view SingleMarkableCell.
Using both these standard components you can achieve this.
Abhi

WDA: TreeByNestingTableColumn and ALV in webdynpro for ABAP

Hi,
1) I am trying to implement a tree with nested structure and multiple columns. I am using RecursionNode in the context and UI element TreeByNestingTableColumn. I am not able to figure out how to make a distinction between the key and parent key. In TreeByKeyTableColumn, we use key and parent key to differentiate. Is there any link which explains how to implement TreeByNestingTableColumn in Webdynpro for ABAP? (I got a link for webdynpro for java though).
2) Can ALV be used to implement a tree structure instead of using Table with TreeByNestingTableColumn or TreeByKeyTableColumn? Then I would be readily able to use ALV features like sort etc. If it can be used is there any link which explains how to do it in Webdynpro for ABAP?

Hi Srinivasa,
I can answer the first point. If you use a recursive node and TreeByNestingTableColumn, there is no need to have a rowKey and parentRowKey, since the recursion with the context already defines the hierarchy. As far as I know someone posted a blog that explains how to use the TreeByNestingTableColumn in Web Dynpro Java. I don't have the link available, but this blog would be good place to start. The implementation in WDA and WDJ is pretty much the same here.
Kind regards,
Thomas

Table cell color in webdynpro for ABAP

Similar Messages

Maybe you are looking for