Table cell with more than one component

how can i make table cell with more than one component
like below, cell in column 3 contains few button
col0 | col1 | col2 |
a | b |[btn1] [btn2] [btn3]|
a | b |[btn1] [btn2] |
and when i click on the any of the button a dialog box pop up saying something..

Here's link to someone who did a lot with tables. Not sure about multiple buttons, but it should get you started.
http://www2.gol.com/users/tame/swing/examples/SwingExamples.html

Similar Messages

How to create a table cell occupy more than one row using PDF.

Hi,
I want create a pdf report,which contains a table cell occupied more than one line.
just like html language: <rowspan = 2>
merge cells in one row is allowed,we can use merge cells command(like colspan in html).
but how to mege cells in one column?

Hi,
I want create a pdf report,which contains a table cell occupied more than one line.
just like html language: <rowspan = 2>
merge cells in one row is allowed,we can use merge cells command(like colspan in html).
but how to mege cells in one column?

Can a Table Cell span more than one page?

I'm working with tables in Pages to create a list of literature and important takeaways from each article. Sometimes the important information is more than I can fit on one page. However, Pages doesn't seem to be able to handle splitting cells across multiple pages. Instead, it seems to "push" the overflow text beyond the page, so I can't even see it as I'm typing.
In Word, such situations just cause the table cell to continue on to the next page. But I can't figure out how to do that in Pages. (And I'm a little concerned that there's not a way to handle this.)
Thanks!
Gary

The cell in question does split across 2 pages. "Do I need to" do that isn't really the point.
My question was whether Pages can handle splitting a table cell across 2 pages.
Pages can't; Word can.
(I'm trying to switch over for all of my future work into Pages, so there's a learning curve for me. The type of work I'm doing does have cells that split over 2 pages. In Word, it's not a big deal. Unfortunately, in Pages, I need to split the row in order to do the same thing. Which is kind of a pain, since I'm building the table dynamically and may insert rows above, below or between existing rows. In Word, it automatically handles moving the cells across multiple pages - or merging them back if I edit the text or insert/remove rows above.)

How can a table cell span more than one page?

I need to configure a table of text that permits a single cell containing a large quantity of text to automatically span several pages. This works easily in WORD but not (apparently) in PAGES. I have used the Inspector to check that the table is configured to "Automatically resize to fit content", and that text also wraps in the cells. However, when text entered into a cell reaches the bottom of the page it disappears from view, even though more text can still be added to thst cell. Thus, the contents of the cell do not automatically flow into view on the next page (as automatically does happen in Microsoft Word). The "Pages08 User Manual", page 177, makes no reference to this facility. Neither does the video tutorial on Pages tables. Furthermore, I can find nothing in the "Template Chooser" that I can adapt to my needs. I very much doubt that this is a real limitation in Pages software - so what I am doing wrong?

Thanks, Peter. Okay, I have tried this but without too much success.
I set up a landscape, two column page and imported the Russian text. That resulted in 13 pages of Russian text, in both left and right columns. I then added the English at the end of the Russian and now have 26 pages in total. Then, as you suggest, I inserted a Column Break after the Russian. This forced the English to begin afresh on page 14.
Now I need to find a way of keeping all the Russian text in the left column of all the 26 pages so that I can have the corresponding English translation adjacent in the right column (for all pages 1 - 26). I have explored your suggestion of Layout Breaks but think I have either misunderstood you, or I am doing something fundamentally wrong!
Okay, so now I need to be a little more specific to help you visualize the problem. On my page 1, left column, I have three paragraphs of Russian. Para 4 begins close to the bottom of the left column and flows, as expected into the right-hand column of page 1. Now, if I insert a Layout Break at the end of para 3, I find paras 1-3 are uniformly shared across both the left and right columns. Para 4 stays in the left column, and understandably has moved up somewhat, but para 5, following correctly below para 4 in the left column now flows into the right column, following on from the end of para 3. There are no visual breaks, so now my page 1 left column reads paras 1, 2, first part of 3, then 4 and first part of 5, while the right column now shows the second part of para 3 and the the second part of para 5. This is confusing to understand and confusing to read. This is no good at all.
Inserting a Section Break after para 3 results in para 4 beginning in the left column of page 2 and the whole of the right column of page 1 remains blank. It also seems that that right column is now rendered inaccessible and so I will not be able to put the English of paras 1- 3 into it so that they are adjacent to the Russian paras 1-3 in the left column of page 1.
Inserting a Page Break instead of a Section Break produces the same effect.
In conclusion, I am still stumped. To keep all the Russian in the left column of all 26 pages, I would need to insert a page break at the end of every page .... but then there would seem to be no way to insert the English into the corresponding right-hand columns, beginning of course on page 1. I am surprised that such a fundamentally useful word-processing facility is so complex (or perhaps impossible) in Pages.
Thanks, again, Peter. I have to say that you have been more helpful and informed than any others that have tussled with me over this difficulty.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Spatial index creation for table with more than one geometry columns?

I have table with more than one geometry columns.
I'v added in user_sdo_geom_metadata table record for every column in the table.
When I try to create spatial indexes over geometry columns in the table - i get error message:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 8
ORA-06512: at line 1
What is the the solution?

I'v got errors in my user_sdo_geom_metadata.
The problem does not exists!

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

How to read an internal table with more than one (2 or 3) key field(s).

how to read an internal table with more than one (2 or 3) key field(s). in ecc 6.0 version

hi ,
check this..
report.
tables: marc,mard.
data: begin of itab occurs 0,
      matnr like marc-matnr,
      werks like marc-werks,
      pstat like marc-pstat,
      end of itab.
data: begin of itab1 occurs 0,
      matnr like mard-matnr,
      werks like mard-werks,
      lgort like mard-lgort,
      end of itab1.
parameters:p_matnr like marc-matnr.
select matnr
       werks
       pstat
       from marc
       into table itab
       where matnr = p_matnr.
sort itab by matnr werks.
select matnr
       werks
       lgort
       from mard
       into table itab1
       for all entries in itab
       where matnr = itab-matnr
       and werks = itab-werks.
sort itab1 by matnr werks.
loop at itab.
read table itab1 with key matnr = itab-matnr
                          werks = itab-werks.
endloop.
regards,
venkat.

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

Create a dynamic search in JSP with more than one datasource

Hello,
In the ViewCiteria tag you can specify the datasource in which you want to place the criteria. Is it also possible to work with more than one datasource ?
In my project I want one query form for specifying criteria for more than one datasource. When I send the query form, I want the right view criteria will be coupled with the right datasource.
Has someone more experience with that ???
Thanks!!!

Hi,
I think I got the same problem! I tried to combine all the tables in a new view and create a query on this view.
But when I search and my result has to be one record from the main table, I get this record more than once.
I tried to use distinct but that does not work because each column has a different value, so the record is never the same.
I hope someone can help us!

Create a logical column with more than one data source

I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
What I want to do is the union of 2 physical tables in one logical table.
For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
What I've tried is dragging the datasources I need onto the logical column.
However this isn't working because it only retrieves the data from the first data source.

Hi!
I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
Bye.
Message was edited by:
user578388

Import AP Invoices with more than one Prepayment Application

Hi,
We have a requirement to import AP Invoices from the legacy system with more than one prepayment application to the invoice.
The AP_INVOICES_INTERFACE table provides only one column for Prepayment Number. Also, more than one line can not be created for the same invoice number.
Is there any solution to the above situation?
Gajendra

Dear Srikanth,
Thanks a lot for your reply.
We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
This is my question.
It will be appreciated highly if you give me a solution.
Thanks!
Xingjun Han

Call Transaction and fill a select-options field with more than one value?

Hello everybody,
how can I fill a select-options field with more than one value.
Here is the code example:
CLEAR: GT_BDCDATA, GS_BDCDATA.
GS_BDCDATA-program = 'RHALEINI'.
GS_BDCDATA-DYNPRO = '1000'.
GS_BDCDATA-DYNBEGIN = 'X'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
GS_BDCDATA-FNAM = 'PCHOTYPE'.
GS_BDCDATA-FVAL = 'P'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
LOOP AT gt_hrobjinfty INTO gs_hrobjinfty.
    GS_BDCDATA-FNAM = 'PCHOBJID-LOW'.
    GS_BDCDATA-FVAL = gs_hrobjinfty-objid.
    APPEND GS_BDCDATA TO GT_BDCDATA.
    CLEAR: GS_BDCDATA.
ENDLOOP.
CALL TRANSACTION 'PFAL' USING GT_BDCDATA MODE 'A'
                   MESSAGES INTO GT_MESSAGES.
THX.

Hi,
Please refer the code below:
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
Thanks,
Sriram Ponna.

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Table cell with more than one component

Similar Messages

Maybe you are looking for