Table containing link between SAP REFX Business Partner and Customer

Hi,
I am stuck up at a requirement wherein i need the name of the table in which i can pass REFX Business Partner number and get the corresponding Customer Code in the output.
Can anyone help me in this regard.
Thanks in advance
Pankaj Wadhwa

Hi Pankaj,
release 470: table BD001 contains link between partner and customer
SAP ERP: table CVI_CUST_LINK contains link between internal partner guid(!) and customer
Partner guid is field in table BUT000.
Hope that helps.
Regards, Franz

Similar Messages

Difference between Business Partner and Customer in ISU?

Is there any difference between business partner and customer in ISU?
if yes then wht?

Hi,
Yes Business Partner is a broad term used in ISU for various roles. A business Partner can be a Customer for company, an employee or even a vendor.
It depends on what role business partner has been given. Initially by default all Business Partners are assigned a default role "Business Partner (Gen.)". Later it can be changed to any role like Employee, Vendor, etc.
Business Partner with role "Contract Partner" is normally the end Customer which I believe you are referring to.
For more info on Business Partner, please check below link:
[Business Partner Master Data|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABP/CABP.pdf]
Thanks.
Ravi

Difference between Business Partner and Customer Master repository

What is the difference between Business Partner and Customer Master repository ?
Is the Business Partner repository to be used in case CRM is also in landscape ? or Customer master repository is good enough ?
Sandesh

Hi,
If the landscape has both CRM and SAP ECC a business partner repository model should be good.
If it has ECC alone.a Customer Repository is needed.
But when there are many legacy systems which also contains master data fields, the standard business repository provided by SAP wont provide a good solution as it wont cover the legacy master fields..In this case its better to go for a customized repository and you can use the standard repository as a reference.
Thanks

Table containing link between material document and serial number.

Hello.
In connection with a goods receipt for purchase order in transaction MIGO a material that is serial number controlled is being recevied. The transaction allows the user to seach and use a serial number. The user then posts the goods receipt for the purchase order and a material document is created (entry in table MSEG).
With this entry in MSEG as a starting point, I have to find the serial number that the user selected when posting the goods receipt. I have been looking in thse tables EKPO, RESB, RSDBS, AFPO, EBAN, RKPF, MSEG and MKPF, but none of them has the serial number used. Would anyone be of assistance.
Thank you very much.

Hi,
2 options:
1. Use tables: MSEG, SER03, OBJK.
Links:
- MSEG & SER03 to read the object number
MSEG-MBLNR = SER03-MBLNR + MSEG-MJAHR = SER03-MJAHR + MSEG-ZEILE = SER03-ZEILE
- SER03 & OBJK to read the serial number
Read OBKNR from SER03 with the above link & pass the same to OBJK table here you can get the serial number (OBJK-SERNR)
2. Use FM - GET_SERNOS_OF_DOCUMENT
Regards,
Vivek

In which table the link between the R/3 vendor and SRM vendor no are found?

Hi experts,
Can anay one tell me in which table exactly where we can find the relation between the R/3 vendors who are replicated to SRM and material groups which are replicated to SRM.
I just want to know th backend number and the frontend Number of the above two
please help me.
Regards,
Sairam.

Hi Sai,
All the replicated material groups from back end R/3 can be seen using COMM_HIERARCHY transaction as categories.
You can choose category as the search criteria and then click start tab to view all the replicated material groups.
In the VENMAP table you can see all the replicated vendors from back end along with their logical systems from which they were replciated.
Using PPOSV_BBP transaction you can see all the replicated vendors in your Vendor Group along with the vendor code and Business partner number.
Hope this resolves your query. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Link between SAP R/3 KPRO and SAP Portal

I'm looking for a link between the archive KPRO of SAP R/3 and the content of SAP portal. In particular I'm interested in a link for the documents loaded in the KPRO archive in SAP R/3 and the SAP portal.
Theank you for the interest.

Hello Luca,
here are some informations about KM Connector for DMS:
Software:
Service.sap.com/patches
-> Entry by application group
-> BP for DMS Connector KM 1.0
Or Software and Documentation:
https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
 Browse Content Portfolio
 Choose: Every User Content & Document Mgmt
 Choose: BP for DMS Connector for KM
 Choose button: Documentation (on the upper right corner)
Regards
Thomas

CRM Business Partner and Customer Mapping

Hi,
I wanted to know, how do we find out, that a BDOC of type BUPA_MAIN in SMW3_BDOC will be a customer or a Business Partner.
Is there some way to know this thing.
Regards,
Rishav

Hi Rishav,
Here is how you can find it out.
In transaction smw01, you get get the BP number. In trancaction BP in CRM. you can check the role of the BP. Then you can check the clasification that is mapped to this role of BP. Then in ERP go to transaction PIDE and check the mapping from from CRM->ERP. There you can find the Account group mapped to this classicication.You can find all the customer account groups in ERP using transaction OVT0.
All these account groups would be mapped to customers in ERP.
Hope this clarifies your query.
Best Regards,
Shourav

Table for link between conttract account no and business partner

Hi,
can anyone let me know abt any table that defines relation between contract account and business partner.
so dat for a contract account no i can get 1 business partner .
Thnx,

Hi
Use the table
VVKKFOPT and VVKKFOP
both business partner and Contract account fields are there.
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

SAP ISU- Business Partner

Hi All,
I have a couple of queries more pertaining to SAP ISU Business Partner which are as below:
1.Can we delete an exiting Business Partner?If yes, how do we do it?Or is it only marked for deletion.In that case,Can we see a report to view all existing BP and BP marked for deletion?
2.Can we lock an exisiting BP?For example, a BP was created but was not used for any purpose.Can we lock the BP so that nobody can use it accidentally?
Look forward to your responses.
Thanks
Amitav Otta

Hi Amitav,
You have the possibility to delete temporary business partners that are no longer needed, or business partners that were loaded into a system by mistake without archiving these data records beforehand.
In this way the volume of data is reduced and performance is improved
You have two different possibilities to delete business partners from your database.
1.One step procedure
Using the transaction Deletion of business partners (BUPA_DEL), you can remove business partners from your system
a)that you select using the business partner number
b)that have been given a deletion or archiving flag
c)that have the system status deletable
You can also carry out a test run.
2.Two step procedure
a.) In preparation for the delete operation, you can first determine the data records for deletion and set the relevant system status using the transaction Set deletion or archiving flag (BUPA_PRE_DA).
b.) Following this, you carry out the actual delete operation using the transaction Deletion of business partners (BUPA_DEL). You should have set the flag deletable as the parameter.
In both cases it is checked beforehand whether the business partners intended for archiving are still being actively used in the system. These checks are defined in the BDT event DELE1. You can also define other checks here.
You can only delete business partner data records as a whole. It is not possible to delete only certain data of business partners.
You have the possibility to delete user-defined tables. To do this you must define function modules for the BDT event DELE2.
The business partners removed from the system, as well as the business partners that are still being used and that cannot be deleted, are recorded in an application log.
In order to evaluate the log, choose the transaction Evaluate application log (SLG1) and enter the object BDT_DATAARCHIVING and the sub-object CA_BUPA.
cheers
kp

Relation between Business Partner and User

Hi everyone.
Where can i found the relation between the business partnes and user in the tables of CRM application.
Thanks.
Mauricio N.

But in the database where is located this data, which is the table in the database that has the relation between business partners and users???
Thanks,
Mauricio N.

Difference between SAP BI 7.0 and SAP Business objects

Dear All,
I would like to know what is the difference between SAP BI 7.0 and SAP Business objects.What Advantage will we have if we implement sap business objects rather then SAP BI 7.0.WOur management wants to implement

Hi,
Strategies for better reports, queries, Web reporting, formatting, dashboards, cockpits, planning, and performance management
advantages of BO
Crystal Reports XI is the latest version of the report writer from Business Objects. Local reports guru David McAmis takes the new version for a spin.
Most developers might know Crystal Reports from versions included in Studio, Visual Studio.NET, and other popular developer IDEu2019s such as BEA Workshop, C# Builder, Delphi 2005, JBuilder, WebSphere.
In this latest installment both report and application developers have something to be excited about as there are a host of new features for report design and integration. Hereu2019s a run-down of what you can expect in this release.
What's New in Xcelsius version 4.5
Xcelsius now provides the following new components:
Candlestick and OHLC Chart components
The open-high-low-close and candlestick charts are primarily used to display stock data. Each marker corresponds to the four values, which are represented as lines attached to the marker on the OHLC chart and as colors on the candlestick chart. Open displays the opening price of the stock. High displays the highest price the stock achieved on that day. Low displays the lowest price the of the stock on that day. Close displays the closing price of the stock.
For more advantages go through the below link
http://www.crimson-consulting.com/marketing/experience/knowledge/white_papers/cognos_tco.pdf
For BI go throug hthe below link
http://www.elegantjbi.com/Why-Business-Intelligence-better/business-intelligence-advantage.htm
Regards,
Marasa.

Mapping between Business Partner and BDoc type BUPA_MAIN

Hi Experts,
When creating a business partner system automatically generates BUPA_MAIN as its BDoc type.
Can some one please let me know the mapping between business partner and the BDoc type BUPA_MAIN.
I mean to say how BUPA_MAIN(BDoc type) is getting triggered while creating business partner.
Maximum points will be rewarded.
Thanks in advance
Nadh.R

Hi Nadh,
This is done in SMOEAC transaction where you assign the subscription and replication objects.
You go to SMOEAC and select the object type as Subscription and click on display icon and it displays the subscription ALL Business Partners and when you click on this or expand you find publication and when you expand this you find replication objects and against this you find the BUPA_MAIN bdoc type.
Hope this helps and if so please reward points.
Thanks
Srini

Connection between business partner and organisational unit

Hello,
I have a problem with the account integration in cProjects ( error message: Cost/revenue rate X is not valid in organization 00000000 ) and I think that there could be a problem with the treewalk from the business partner to the organisational unit.
I am using the transaction ppome to customize the organisational unit with the employess. Unfortunately I cannot see this connections when I am using T-Code PPSS to do the treewalk. Does someone know which evaluation path is the correct one for price evaluation?
Is it correct that the connection between the business partner and the organisational unit is:
employee <-> bp <-> org. unit? What is a good starting point to search for the gap between this chain?
When and what for is cProjects treewalking for the price? What calculation is cProj doing with it?
Thanks in advance,
Vanessa

The problem is solved due an incorrect business partner. So the question is obsolet, thx.

Table for link between Accounting document and Billing document

Which is the table for link between Accounting document and Billing document ?
Thanks & Regards

Ø Go to SE16N, enter table BSAD
Ø In the Reference Field (VBELN) enter the Billing Document no.
Tips:
Ø Make sure that only those billing documents will be considered whose accounting documents actually exists
Ø No Accounting documents will be displayed for Credits, Free of charge orders and those acc. Documents which have been cancelled.

Difference between SAP R/3 , ECC and MySAP

Hi,
I would like to know the difference between SAP R/3 ,ECC and MySAP. Please let me know the difference , the links earlier found were not getting into my brains.
To my understanding the SAP R/3 4.5b,4.6c - earlier versions contains the basic modules like Logistics(MM,SD) and PP (core functional modules), on technical point the little function modules were obsolete in these version.
4.7 (included the Web application server,for web based and integrating with XI,Enterprise core ,Enterprise Extensions ) + core functional modules +.HR + FI/CO+ SCM (MM,WM,PP) + PLM
ECC (Enterprise Core Component) - ?
MySAP - ?
Correct me and also your answer will help me understand better.
Regards
Shawn

ECC 6.0 means it is an latest version of SAP ERP package (ERP Central components). it will support for netweaver and BW.
Chk this links for more details.
ECC 6.0 clarification
Replacement for CONVERT_DATE_INPUT in ECC 6.0
Upgrade from sap 4.7 to ECC 6.0
Upgradation to ERP 6.0 '2005'
Differences between 4.6C and 4.7 EE
To know the functionality changes you can refer:
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade
Rewards if useful.

Table containing link between SAP REFX Business Partner and Customer

Similar Messages

Maybe you are looking for