Table creation by ouser

We have a common database with single schema. But I want to know the ouser by which particular table is created.
Please help me.

hi there
its user related information is in all_tables
select * from all_tables where table_name ='<table_name>';form which system it has created u can find out in
select * from v$sql;
select * from v$session;regards
Hitesh
Edited by: Hitesh Nirkhey on Jan 19, 2011 2:48 PM

Similar Messages

Slow table creation after upgrade from 10.2.0.3 to 11.2.0.1 using DBUA

I've recently completed a database upgrade from 10.2.0.3 to 11.2.0.1 using the DBUA.
I've since encountered a slowdown when running a script which drops and recreates a series of ~250 tables. The script normally runs in around 19 seconds. After the upgrade, the script requires ~2 minutes to run.
By chance has anyone encountered something similar?
The problem may be related to the behavior of an "after CREATE on schema" trigger which grants select privileges to a role through the use of a dbms_job call; between 10g and the database that was upgraded from 10G to 11g. Currently researching this angle.
I will be using the following table creation DDL for this abbreviated test case:
create table ALLIANCE (
   ALLIANCEID           NUMBER(10)                      not null,
   NAME                 VARCHAR2(40)                    not null,
   CREATION_DATE        DATE,
   constraint PK_ALLIANCE primary key (ALLIANCEID)
           using index
       tablespace LIVE_INDEX
tablespace LIVE_DATA;When calling the above DDL, an "after CREATE on schema" trigger is fired which schedules a job to immediately run to grant select privilege to a role for the table which was just created:
create or replace
trigger select_grant
after CREATE on schema
declare
    l_str varchar2(255);
    l_job number;
begin
    if ( ora_dict_obj_type = 'TABLE' ) then
        l_str := 'execute immediate "grant select on ' ||
                                     ora_dict_obj_name ||
                                    ' to select_role";';
        dbms_job.submit( l_job, replace(l_str,'"','''') );
    end if;
end;
{code}
Below I've included data on two separate test runs. The first is on the upgraded database and includes optimizer parameters and an abbreviated TKPROF. I've also, included the offending sys generate SQL which is not issued when the same test is run on a 10g environment that has been set up with a similar test case. The 10g test run's TKPROF is also included below.
The version of the database is 11.2.0.1.
These are the parameters relevant to the optimizer for the test run on the upgraded 11g SID:
{code}
SQL> show parameter optimizer
NAME                                 TYPE        VALUE
optimizer_capture_sql_plan_baselines boolean     FALSE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      11.2.0.1
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
optimizer_secure_view_merging        boolean     TRUE
optimizer_use_invisible_indexes      boolean     FALSE
optimizer_use_pending_statistics     boolean     FALSE
optimizer_use_sql_plan_baselines     boolean     TRUE
SQL> show parameter db_file_multi
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     8
SQL> show parameter db_block_size
NAME                                 TYPE        VALUE
db_block_size                        integer     8192
SQL> show parameter cursor_sharing
NAME                                 TYPE        VALUE
cursor_sharing                       string      EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME                PNAME                     PVAL1 PVAL2
SYSSTATS_INFO        STATUS                          COMPLETED
SYSSTATS_INFO        DSTART                          03-11-2010 16:33
SYSSTATS_INFO        DSTOP                           03-11-2010 17:03
SYSSTATS_INFO        FLAGS                         0
SYSSTATS_MAIN        CPUSPEEDNW           713.978495
SYSSTATS_MAIN        IOSEEKTIM                    10
SYSSTATS_MAIN        IOTFRSPEED                 4096
SYSSTATS_MAIN        SREADTIM               1565.746
SYSSTATS_MAIN        MREADTIM
SYSSTATS_MAIN        CPUSPEED                   2310
SYSSTATS_MAIN        MBRC
SYSSTATS_MAIN        MAXTHR
SYSSTATS_MAIN        SLAVETHR
13 rows selected.
{code}
Output from TKPROF on the 11g SID:
{code}
create table ALLIANCE (
   ALLIANCEID           NUMBER(10)                      not null,
   NAME                 VARCHAR2(40)                    not null,
   CREATION_DATE        DATE,
   constraint PK_ALLIANCE primary key (ALLIANCEID)
           using index
       tablespace LIVE_INDEX
tablespace LIVE_DATA
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          4           0
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.00       0.00          0          0          4           0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 324
{code}
... large section omitted ...
Here is the performance hit portion of the TKPROF on the 11g SID:
{code}
SQL ID: fsbqktj5vw6n9
Plan Hash: 1443566277
select next_run_date, obj#, run_job, sch_job
from
(select decode(bitand(a.flags, 16384), 0, a.next_run_date,
a.last_enabled_time) next_run_date,       a.obj# obj#,
decode(bitand(a.flags, 16384), 0, 0, 1) run_job, a.sch_job sch_job from
(select p.obj# obj#, p.flags flags, p.next_run_date next_run_date,
p.job_status job_status, p.class_oid class_oid,      p.last_enabled_time
last_enabled_time, p.instance_id instance_id,      1 sch_job   from
sys.scheduler$_job p   where bitand(p.job_status, 3) = 1    and
((bitand(p.flags, 134217728 + 268435456) = 0) or
(bitand(p.job_status, 1024) <> 0))    and bitand(p.flags, 4096) = 0    and
p.instance_id is NULL    and (p.class_oid is null      or (p.class_oid is
not null      and p.class_oid in (select b.obj# from sys.scheduler$_class b
                           where b.affinity is null)))   UNION ALL   select
q.obj#, q.flags, q.next_run_date, q.job_status, q.class_oid,
q.last_enabled_time, q.instance_id, 1   from sys.scheduler$_lightweight_job
q   where bitand(q.job_status, 3) = 1    and ((bitand(q.flags, 134217728 +
268435456) = 0) or         (bitand(q.job_status, 1024) <> 0))    and
bitand(q.flags, 4096) = 0    and q.instance_id is NULL    and (q.class_oid
is null      or (q.class_oid is not null      and q.class_oid in (select
c.obj# from sys.scheduler$_class c                          where
c.affinity is null)))   UNION ALL   select j.job, 0,
from_tz(cast(j.next_date as timestamp),      to_char(systimestamp,'TZH:TZM')
), 1, NULL,      from_tz(cast(j.next_date as timestamp),
to_char(systimestamp,'TZH:TZM')),     NULL, 0   from sys.job$ j   where
(j.field1 is null or j.field1 = 0)    and j.this_date is null) a   order by
1)   where rownum = 1
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        1      0.47       0.47          0       9384          0           1
total        3      0.48       0.48          0       9384          0           1
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS   (recursive depth: 1)
Rows     Row Source Operation
      1 COUNT STOPKEY (cr=9384 pr=0 pw=0 time=0 us)
      1   VIEW (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=6615380 card=194570)
      1    SORT ORDER BY STOPKEY (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=11479630 card=194570)
194790     VIEW (cr=9384 pr=0 pw=0 time=537269 us cost=2563 size=11479630 card=194570)
194790      UNION-ALL (cr=9384 pr=0 pw=0 time=439235 us)
    231       FILTER (cr=68 pr=0 pw=0 time=920 us)
    231        TABLE ACCESS FULL SCHEDULER$_JOB (cr=66 pr=0 pw=0 time=690 us cost=19 size=13157 card=223)
      1        TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=2 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
      1         INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
      0       FILTER (cr=3 pr=0 pw=0 time=0 us)
      0        TABLE ACCESS FULL SCHEDULER$_LIGHTWEIGHT_JOB (cr=3 pr=0 pw=0 time=0 us cost=2 size=95 card=1)
      0        TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=0 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
      0         INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=0 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
194559       TABLE ACCESS FULL JOB$ (cr=9313 pr=0 pw=0 time=167294 us cost=2542 size=2529254 card=194558)
{code}
and the totals at the end of the TKPROF on the 11g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      2      0.00       0.00          0          0          4           0
Fetch        0      0.00       0.00          0          0          0           0
total        3      0.00       0.00          0          0          4           0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       70      0.00       0.00          0          0          0           0
Execute     85      0.01       0.01          0         62        208          37
Fetch       49      0.48       0.49          0       9490          0          35
total      204      0.51       0.51          0       9552        208          72
Misses in library cache during parse: 5
Misses in library cache during execute: 3
   35 user SQL statements in session.
   53 internal SQL statements in session.
   88 SQL statements in session.
Trace file: 11gSID_ora_17721.trc
Trace file compatibility: 11.1.0.7
Sort options: default
       1 session in tracefile.
      35 user SQL statements in trace file.
      53 internal SQL statements in trace file.
      88 SQL statements in trace file.
      51 unique SQL statements in trace file.
    1590 lines in trace file.
      18 elapsed seconds in trace file.
{code}
The version of the database is 10.2.0.3.0.
These are the parameters relevant to the optimizer for the test run on the 10g SID:
{code}
SQL> show parameter optimizer
NAME                                 TYPE        VALUE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      10.2.0.3
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
optimizer_secure_view_merging        boolean     TRUE
SQL> show parameter db_file_multi
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     8
SQL> show parameter db_block_size
NAME                                 TYPE        VALUE
db_block_size                        integer     8192
SQL> show parameter cursor_sharing
NAME                                 TYPE        VALUE
cursor_sharing                       string      EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME                PNAME                     PVAL1 PVAL2
SYSSTATS_INFO        STATUS                          COMPLETED
SYSSTATS_INFO        DSTART                          09-24-2007 11:09
SYSSTATS_INFO        DSTOP                           09-24-2007 11:09
SYSSTATS_INFO        FLAGS                         1
SYSSTATS_MAIN        CPUSPEEDNW           2110.16949
SYSSTATS_MAIN        IOSEEKTIM                    10
SYSSTATS_MAIN        IOTFRSPEED                 4096
SYSSTATS_MAIN        SREADTIM
SYSSTATS_MAIN        MREADTIM
SYSSTATS_MAIN        CPUSPEED
SYSSTATS_MAIN        MBRC
SYSSTATS_MAIN        MAXTHR
SYSSTATS_MAIN        SLAVETHR
13 rows selected.
{code}
Now for the TKPROF of a mirrored test environment running on a 10G SID:
{code}
create table ALLIANCE (
   ALLIANCEID           NUMBER(10)                      not null,
   NAME                 VARCHAR2(40)                    not null,
   CREATION_DATE        DATE,
   constraint PK_ALLIANCE primary key (ALLIANCEID)
           using index
       tablespace LIVE_INDEX
tablespace LIVE_DATA
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.01          0          2         16           0
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.01       0.01          0          2         16           0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 113
{code}
... large section omitted ...
Totals for the TKPROF on the 10g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.02          0          0          0           0
Execute      1      0.00       0.00          0          2         16           0
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.00       0.02          0          2         16           0
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       65      0.01       0.01          0          1         32           0
Execute     84      0.04       0.09         20         90        272          35
Fetch       88      0.00       0.10         30        281          0          64
total      237      0.07       0.21         50        372        304          99
Misses in library cache during parse: 38
Misses in library cache during execute: 32
   10 user SQL statements in session.
   76 internal SQL statements in session.
   86 SQL statements in session.
Trace file: 10gSID_ora_32003.trc
Trace file compatibility: 10.01.00
Sort options: default
       1 session in tracefile.
      10 user SQL statements in trace file.
      76 internal SQL statements in trace file.
      86 SQL statements in trace file.
      43 unique SQL statements in trace file.
     949 lines in trace file.
       0 elapsed seconds in trace file.
{code}
Edited by: user8598842 on Mar 11, 2010 5:08 PM

So while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table."

Table creation - order of events

I am trying to get some help on the order I should be carrying out table creation tasks.
Say I create a simple table:
create table title (
title_id number(2) not null,
title varchar2(10) not null,
effective_from date not null,
effective_to date not null,
constraint pk_title primary key (title_id)
I believe I should populate the data, then create my index:
create unique index title_title_id_idx on title (title_id asc)
But I have read that Oracle will automatically create an index for my primary key if I do not do so myself.
At what point does Oracle create the index on my behalf and how do I stop it?
Should I only apply the primary key constraint after the data has been loaded as well?
Even then, if I add the primary key constraint will Oracle not immediately create an index for me when I am about to create a specific one matching my naming conventions?

yeah but just handle it the way you would handle any other constraint violation - with the EXCEPTIONS INTO clause...
SQL> select index_name, uniqueness from user_indexes
2 where table_name = 'APC'
3 /
no rows selected
SQL> insert into apc values (1)
2 /
1 row created.
SQL> insert into apc values (2)
2 /
1 row created.
SQL> alter table apc add constraint apc_pk primary key (col1)
2 using index ( create unique index my_new_index on apc (col1))
3 /
Table altered.
SQL> insert into apc values (2)
2 /
insert into apc values (2)
ERROR at line 1:
ORA-00001: unique constraint (APC.APC_PK) violated
SQL> alter table apc drop constraint apc_pk
2 /
Table altered.
SQL> insert into apc values (2)
2 /
1 row created.
SQL> alter table apc add constraint apc_pk primary key (col1)
2 using index ( create unique index my_new_index on apc (col1))
3 /
alter table apc add constraint apc_pk primary key (col1)
ERROR at line 1:
ORA-02437: cannot validate (APC.APC_PK) - primary key violated
SQL> @%ORACLE_HOME%/rdbms/admin/utlexcpt.sql
Table created.
SQL> alter table apc add constraint apc_pk primary key (col1)
2 using index ( create unique index my_new_index on apc (col1))
3 exceptions into EXCEPTIONS
4 /
alter table apc add constraint apc_pk primary key (col1)
ERROR at line 1:
ORA-02437: cannot validate (APC.APC_PK) - primary key violated
SQL> select * from apc where rowid in ( select row_id from exceptions)
2 /
      COL1
         2
         2
SQL> All this is in the documentation. Find out more.
Cheers, APC

How to create monthly table creation?

Hi Mates,
Unable to create table by month in analytic database but load the data to the previous table continuous as attached screenshot, Schema user has the creation privilege. We are using Webcenter interaction 10gR4.
How to create monthly table creation please?
Thanks,
Katherine

Hi Trevor,
Thanks for your help. We were able to create table and load data till Apr as attached.
However the analytic user privilege has been modified on Apr due to server operation.
Since then, there was a message saying there is no permission to create tables in the analytic log,
analytic user privilege has been granted after checked this message, As I suspected, the issue occurred after modifying analytic user privilege.
Currently, analytic users are granted with all privilege.
Any idea please?
Thanks,
Kathy

Dynamic Internal Table creation and population

Hi gurus !
my issue refers to the slide 10 provided in this slideshow : https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b332e090-0201-0010-bdbd-b735e96fe0ae
My example is gonna sound dumb, but anyway: I want to dynamically select from a table into a dynamically created itab.
Letu2019s use only EKPO, and only field MENGE.
For this, I use Classes cl_abap_elemdescr, cl_sql_result_set and the Data Ref for table creation. But while fetching the resultset, program dumps when fields like MENGE, WRBTR are accessed. Obviously their type are not correctly taken into account by my program.
Here it comes:
DATA: element_ref             TYPE REF TO cl_abap_elemdescr,
      vl_fieldname               TYPE string,
             tl_components         TYPE abap_component_tab,
             sl_components         LIKE LINE OF tl_components_alv,
linetype_lcl               TYPE REF TO cl_abap_structdescr,
ty_table_type            TYPE REF TO cl_abap_tabledescr,
g_resultset             TYPE REF TO cl_sql_result_set
u2026
CONCATENATE sg_columns-table_name '-' sg_columns-column_name INTO vl_fieldname.
* sg_columns-table_name contains 'EKPO'
* sg_columns-column_name contains 'MENGE'
* getting the element as a component
element_ref ?= cl_abap_elemdescr=>describe_by_name( vl_fieldname ).
sl_components-name = sg_columns-column_name.
sl_components-type ?= element_ref.
APPEND sl_components TO tl_components.
* dynamic creation of internal table
linetype_lcl = cl_abap_structdescr=>create( tl_components ).
ty_table_type = cl_abap_tabledescr=>create(
                  p_line_type = linetype_lcl ).
u2026
* Then I will create my field symbol table and line. Code has been cut here.
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
u2026
* Then I will execute my query. Here itu2019s: Select MENGE From EKPO Where Rownum = 1.
g_resultset = g_stmt_ref->execute_query( stmt_str ).
* Then structure for the Resultset is set
CALL METHOD g_resultset->set_param_struct
    EXPORTING
      struct_ref = dy_line.
* Fetching the lines of the resultset => Dumpu2026
WHILE g_resultset->next( ) > 0.
    ASSIGN dy_line->* TO <dyn_wa>.
    APPEND <dyn_wa> TO <dyn_table>.
ENDWHILE.
Anyone has any clue to how prevent my Dump ??
The component for MENGE seems to be described as a P7 with 2 decimals. And the resultset wanna use a QUAN type... or something like that !

Hello
I have expanded your sample coding for selecting three fields out of EKPO:
*& Report ZUS_SDN_SQL_RESULT_SET
*& Thread: Dynamic Internal Table creation and population
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1375510"></a>
*& NOTE: Coding for dynamic structure / itab creation taken from:
*& Creating Flat and Complex Internal Tables Dynamically using RTTI
*& https://wiki.sdn.sap.com/wiki/display/Snippets/Creating+Flat+and+
*& Complex+Internal+Tables+Dynamically+using+RTTI
REPORT zus_sdn_sql_result_set.
TYPE-POOLS: abap.
DATA:
go_sql_stmt       TYPE REF TO cl_sql_statement,
go_resultset      TYPE REF TO cl_sql_result_set,
gd_sql_clause     TYPE string.
DATA:
gd_tabfield      TYPE string,
go_table         TYPE REF TO cl_salv_table,
go_sdescr_new    TYPE REF TO cl_abap_structdescr,
go_tdescr        TYPE REF TO cl_abap_tabledescr,
gdo_handle       TYPE REF TO data,
gdo_record       TYPE REF TO data,
gs_comp          TYPE abap_componentdescr,
gt_components    TYPE abap_component_tab.
FIELD-SYMBOLS:
<gs_record>   TYPE ANY,
<gt_itab>     TYPE STANDARD TABLE.
START-OF-SELECTION.
continued.

Bad file is not created during the external table creation.

Hello Experts,
I have created a script for external table in Oracle 10g DB. Everything is working fine except it does not create the bad file, But it creates the log file. I Cann't figure out what is the issue. Because my shell scripts is failing and the entire program is failing. I am attaching the table creation script and the shell script where it is refering and the error. Kindly let me know if something is missing. Thanks in advance
Table Creation Scripts:_-------------------------------
create table RGIS_TCA_DATA_EXT
guid VARCHAR2(250),
badge VARCHAR2(250),
scheduled_store_id VARCHAR2(250),
parent_event_id VARCHAR2(250),
event_id VARCHAR2(250),
organization_number VARCHAR2(250),
customer_number VARCHAR2(250),
store_number VARCHAR2(250),
inventory_date VARCHAR2(250),
full_name VARCHAR2(250),
punch_type VARCHAR2(250),
punch_start_date_time VARCHAR2(250),
punch_end_date_time VARCHAR2(250),
event_meet_site_id VARCHAR2(250),
vehicle_number VARCHAR2(250),
vehicle_description VARCHAR2(250),
vehicle_type VARCHAR2(250),
is_owner VARCHAR2(250),
driver_passenger VARCHAR2(250),
mileage VARCHAR2(250),
adder_code VARCHAR2(250),
bonus_qualifier_code VARCHAR2(250),
store_accuracy VARCHAR2(250),
store_length VARCHAR2(250),
badge_input_type VARCHAR2(250),
source VARCHAR2(250),
created_by VARCHAR2(250),
created_date_time VARCHAR2(250),
updated_by VARCHAR2(250),
updated_date_time VARCHAR2(250),
approver_badge_id VARCHAR2(250),
approver_name VARCHAR2(250),
orig_guid VARCHAR2(250),
edit_type VARCHAR2(250)
organization external
type ORACLE_LOADER
default directory ETIME_LOAD_DIR
access parameters
RECORDS DELIMITED BY NEWLINE
BADFILE ETIME_LOAD_DIR:'tstlms.bad'
LOGFILE ETIME_LOAD_DIR:'tstlms.log'
READSIZE 1048576
FIELDS TERMINATED BY '|'
MISSING FIELD VALUES ARE NULL(
GUID
,BADGE
,SCHEDULED_STORE_ID
,PARENT_EVENT_ID
,EVENT_ID
,ORGANIZATION_NUMBER
,CUSTOMER_NUMBER
,STORE_NUMBER
,INVENTORY_DATE char date_format date mask "YYYYMMDD HH24:MI:SS"
,FULL_NAME
,PUNCH_TYPE
,PUNCH_START_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,PUNCH_END_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,EVENT_MEET_SITE_ID
,VEHICLE_NUMBER
,VEHICLE_DESCRIPTION
,VEHICLE_TYPE
,IS_OWNER
,DRIVER_PASSENGER
,MILEAGE
,ADDER_CODE
,BONUS_QUALIFIER_CODE
,STORE_ACCURACY
,STORE_LENGTH
,BADGE_INPUT_TYPE
,SOURCE
,CREATED_BY
,CREATED_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,UPDATED_BY
,UPDATED_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,APPROVER_BADGE_ID
,APPROVER_NAME
,ORIG_GUID
,EDIT_TYPE
location (ETIME_LOAD_DIR:'tstlms.dat')
reject limit UNLIMITED;
_***Shell Script*:*----------------_*
version=1.0
umask 000
DATE=`date +%Y%m%d%H%M%S`
TIME=`date +"%H%M%S"`
SOURCE=`hostname`
fcp_login=`echo $1|awk '{print $3}'|sed 's/"//g'|awk -F= '{print $2}'`
fcp_reqid=`echo $1|awk '{print $2}'|sed 's/"//g'|awk -F= '{print $2}'`
TXT1_PATH=/home/ac1/oracle/in/tsdata
TXT2_PATH=/home/ac2/oracle/in/tsdata
ARCH1_PATH=/home/ac1/oracle/in/tsdata
ARCH2_PATH=/home/ac2/oracle/in/tsdata
DEST_PATH=/home/custom/sched/in
PROGLOG=/home/custom/sched/logs/rgis_tca_to_tlms_create.sh.log
PROGNAME=`basename $0`
PROGPATH=/home/custom/sched/scripts
cd $TXT2_PATH
FILELIST2="`ls -lrt tstlmsedits*.dat |awk '{print $9}'`"
NO_OF_FILES2="`ls -lrt tstlmsedits*.dat |awk '{print $9}'|wc -l`"
$DEST_PATH/tstlmsedits.dat for i in $FILELIST2
do
cat $i >> $DEST_PATH/tstlmsedits.dat
printf "\n" >> $DEST_PATH/tstlmsedits.dat
mv $i $i.$DATE
#mv $i $TXT2_PATH/test/.
mv $i.$DATE $TXT2_PATH/test/.
done
if test $NO_OF_FILES2 -eq 0
then
echo " no tstlmsedits.dat file exists " >> $PROGLOG
else
echo "created dat file tstlmsedits.dat at $DATE" >> $PROGLOG
echo "-------------------------------------------" >> $PROGLOG
fi
NO_OF_FILES1="`ls -lrt tstlms*.dat |awk '{print $9}'|wc -l`"
FILELIST1="`ls -lrt tstlms*.dat |awk '{print $9}'`"
$DEST_PATH/tstlms.datfor i in $FILELIST1
do
cat $i >> $DEST_PATH/tstlms.dat
printf "\n" >> $DEST_PATH/tstlms.dat
mv $i $i.$DATE
# mv $i $TXT2_PATH/test/.
mv $i.$DATE $TXT2_PATH/test/.
done
if test $NO_OF_FILES1 -eq 0
then
echo " no tstlms.dat file exists " >> $PROGLOG
else
echo "created dat file tstlms.dat at $DATE" >> $PROGLOG
fi
cd $TXT1_PATH
FILELIST3="`ls -lrt tstlmsedits*.dat |awk '{print $9}'`"
NO_OF_FILES3="`ls -lrt tstlmsedits*.dat |awk '{print $9}'|wc -l`"
$DEST_PATH/tstlmsedits.datfor i in $FILELIST3
do
cat $i >> $DEST_PATH/tstlmsedits.dat
printf "\n" >> $DEST_PATH/tstlmsedits.dat
mv $i $i.$DATE
#mv $i $TXT1_PATH/test/.
mv $i.$DATE $TXT1_PATH/test/.
done
if test $NO_OF_FILES3 -eq 0
then
echo " no tstlmsedits.dat file exists " >> $PROGLOG
else
echo "created dat file tstlmsedits.dat at $DATE" >> $PROGLOG
echo "-------------------------------------------" >> $PROGLOG
fi
NO_OF_FILES4="`ls -lrt tstlms*.dat |awk '{print $9}'|wc -l`"
FILELIST4="`ls -lrt tstlms*.dat |awk '{print $9}'`"
$DEST_PATH/tstlms.datfor i in $FILELIST4
do
cat $i >> $DEST_PATH/tstlms.dat
printf "\n" >> $DEST_PATH/tstlms.dat
mv $i $i.$DATE
# mv $i $TXT1_PATH/test/.
mv $i.$DATE $TXT1_PATH/test/.
done
if test $NO_OF_FILES4 -eq 0
then
echo " no tstlms.dat file exists " >> $PROGLOG
else
echo "created dat file tstlms.dat at $DATE" >> $PROGLOG
fi
#connecting to oracle to generate bad files
sqlplus -s $fcp_login<<EOF
select count(*) from rgis_tca_data_ext;
select count(*) from rgis_tca_data_history_ext;
exit;
EOF
#counting the records in files
tot_rec_in_tstlms=`wc -l $DEST_PATH/tstlms.dat | awk ' { print $1 } '`
tot_rec_in_tstlmsedits=`wc -l $DEST_PATH/tstlmsedits.dat | awk ' { print $1 } '`
tot_rec_in_tstlms_bad=`wc -l $DEST_PATH/tstlms.bad | awk ' { print $1 } '`
tot_rec_in_tstlmsedits_bad=`wc -l $DEST_PATH/tstlmsedits.bad | awk ' { print $1 } '`
#updating log table
echo "pl/sql block started"
sqlplus -s $fcp_login<<EOF
define tot_rec_in_tstlms     = '$tot_rec_in_tstlms';
define tot_rec_in_tstlmsedits     = '$tot_rec_in_tstlmsedits';
define tot_rec_in_tstlms_bad     = '$tot_rec_in_tstlms_bad';
define tot_rec_in_tstlmsedits_bad='$tot_rec_in_tstlmsedits_bad';
define fcp_reqid ='$fcp_reqid';
declare
l_tstlms_file_id number := null;
l_tstlmsedits_file_id number := null;
l_tot_rec_in_tstlms number := 0;
l_tot_rec_in_tstlmsedits number := 0;
l_tot_rec_in_tstlms_bad number := 0;
l_tot_rec_in_tstlmsedits_bad number := 0;
l_request_id fnd_concurrent_requests.request_id%type;
l_start_date fnd_concurrent_requests.actual_start_date%type;
l_end_date fnd_concurrent_requests.actual_completion_date%type;
l_conc_prog_name fnd_concurrent_programs.concurrent_program_name%type;
l_requested_by fnd_concurrent_requests.requested_by%type;
l_requested_date fnd_concurrent_requests.request_date%type;
begin
--getting concurrent request details
begin
SELECT fcp.concurrent_program_name,
fcr.request_id,
fcr.actual_start_date,
fcr.actual_completion_date,
fcr.requested_by,
fcr.request_date
INTO l_conc_prog_name,
l_request_id,
l_start_date,
l_end_date,
l_requested_by,
l_requested_date
FROM fnd_concurrent_requests fcr, fnd_concurrent_programs fcp
WHERE fcp.concurrent_program_id = fcr.concurrent_program_id
AND fcr.request_id = &fcp_reqid; --fnd_global.conc_request_id();
exception
when no_data_found then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log, 'No data found for request_id');
fnd_file.put_line(fnd_file.log, sqlerrm);
raise_application_error(-20001,
'Error occured when executing RGIS_TCA_TO_TLMS_CREATE.sh ' ||
sqlerrm);
when others then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log,
'Error occured when retrieving request_id request_id');
fnd_file.put_line(fnd_file.log, sqlerrm);
raise_application_error(-20001,
'Error occured when executing RGIS_TCA_TO_TLMS_CREATE.sh ' ||
sqlerrm);
end;
--calling ins_or_upd_tca_process_log to update log table for tstlms.dat file
begin
rgis_tca_to_tlms_process.ins_or_upd_tca_process_log
               (l_tstlms_file_id,
               'tstlms.dat',
               l_conc_prog_name,
               l_request_id,
               l_start_date,
               l_end_date,
               &tot_rec_in_tstlms,
               &tot_rec_in_tstlms_bad,
               null,
               null,
               null,
               null,
               null,
               null,
               null,
               l_requested_by,
               l_requested_date,
               null,
               null,
               null,
               null,
               null);
exception
when others then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log,
'Error occured when executing rgis_tca_to_tlms_process.ins_or_upd_tca_process_log for tstlms file');
fnd_file.put_line(fnd_file.log, sqlerrm);
end;
--calling ins_or_upd_tca_process_log to update log table for tstlmsedits.dat file
begin
rgis_tca_to_tlms_process.ins_or_upd_tca_process_log
               (l_tstlmsedits_file_id,
               'tstlmsedits.dat',
               l_conc_prog_name,
               l_request_id,
               l_start_date,
               l_end_date,
               &tot_rec_in_tstlmsedits,
               &tot_rec_in_tstlmsedits_bad,
               null,
               null,
               null,
               null,
               null,
               null,
               null,
               l_requested_by,
               l_requested_date,
               null,
               null,
               null,
               null,
               null);
exception
when others then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log,
'Error occured when executing rgis_tca_to_tlms_process.ins_or_upd_tca_process_log for tstlmsedits file');
fnd_file.put_line(fnd_file.log, sqlerrm);
end;
end;
exit;
EOF
echo "rgis_tca_to_tlms_process.sql started"
sqlplus -s $fcp_login @$SCHED_TOP/sql/rgis_tca_to_tlms_process.sql $fcp_reqid
exit;
echo "rgis_tca_to_tlms_process.sql ended"
_**Error:*----------------------------------*_
RGIS Scheduling: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
TCATLMS module: TCA To TLMS Import Process
Current system time is 18-AUG-2011 06:13:27
COUNT(*)
     16
COUNT(*)
     25
wc: cannot open /home/custom/sched/in/tstlms.bad
wc: cannot open /home/custom/sched/in/tstlmsedits.bad
pl/sql block started
old 33:     AND fcr.request_id = &fcp_reqid; --fnd_global.conc_request_id();
new 33:     AND fcr.request_id = 18661823; --fnd_global.conc_request_id();
old 63:                &tot_rec_in_tstlms,
new 63:                16,
old 64:                &tot_rec_in_tstlms_bad,
new 64:                ,
old 97:                &tot_rec_in_tstlmsedits,
new 97:                25,
old 98:                &tot_rec_in_tstlmsedits_bad,
new 98:                ,
ERROR at line 64:
ORA-06550: line 64, column 4:
PLS-00103: Encountered the symbol "," when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternatively-q
ORA-06550: line 98, column 4:
PLS-00103: Encountered the symbol "," when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql st
rgis_tca_to_tlms_process.sql started
old 12: and concurrent_request_id = '&1';
new 12: and concurrent_request_id = '18661823';
old 18: and concurrent_request_id = '&1';
new 18: and concurrent_request_id = '18661823';
old 22: rgis_tca_to_tlms_process.run_tca_data(l_tstlms_file_id,&1);
new 22: rgis_tca_to_tlms_process.run_tca_data(l_tstlms_file_id,18661823);
old 33: rgis_tca_to_tlms_process.run_tca_data_history(l_tstlmsedits_file_id,&1);
new 33: rgis_tca_to_tlms_process.run_tca_data_history(l_tstlmsedits_file_id,18661823);
old 44: rgis_tca_to_tlms_process.send_tca_email('TCATLMS',&1);
new 44: rgis_tca_to_tlms_process.send_tca_email('TCATLMS',18661823);
declare
ERROR at line 1:
ORA-20001: Error occured when executing RGIS_TCA_TO_TLMS_PROCESS.sql ORA-01403:
no data found
ORA-06512: at line 59
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 18661823
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 18-AUG-2011 06:13:29
---------------------------------------------------------------------------

Hi,
Check the status of the batch in SM35 transaction.
if the batch is locked by mistake or any other error, now you can release it and aslo you can process again.
To Release -Shift+F4.
Also you can analyse the job status through F2 button.
Bye

Table creation with partition

following is the table creation script with partition
CREATE TABLE customer_entity_temp (
BRANCH_ID NUMBER (4),
ACTIVE_FROM_YEAR VARCHAR2 (4),
ACTIVE_FROM_MONTH VARCHAR2 (3),
partition by range (ACTIVE_FROM_YEAR,ACTIVE_FROM_MONTH)
(partition yr7_1999 values less than ('1999',TO_DATE('Jul','Mon')),
partition yr12_1999 values less than ('1999',TO_DATE('Dec','Mon')),
it gives an error
ORA-14036: partition bound value too large for column
but if I increase the size of the ACTIVE_FROM_MONTH column to 9 , the script works and creates the table. Why is it so ?
Also, by creating a table in this way and populating the table data in their respective partitions, all rows with month less than "JULY" will go in yr7_1999 partition and all rows with month value between "JUL" and "DEC" will go in the second partition yr12_1999 , where will the data with month value equal to "DEC" go?
Plz help me in solving this problem
thanks n regards
Moloy

Hi,
You declared ACTIVE_FROM_MONTH VARCHAR2 (3) and you try to check it against a date in your partitionning clause:TO_DATE('Jul','Mon')so you should first check your data model and what you are trying to achieve exactly.
With such a partition decl, you will not be able to insert dates from december 1998 included and onward. The values are stricly less than (<) not less or equal(<=) hence such lines can't be inserted. I'd advise you to check the MAXVALUE value jocker and the ENABLE ROW MOVEMENT partitionning clause.
Regards,
Yoann.

Dynamic Table Creation & Fill Up

Hello,
Can anyone please guide where I can find examples for dynamic table creation (programmaticaly), with dynamic number of columns and rows, used to place inside text components (or whatever) to fill them with data.
All programmatic.
Using JSF, ADF BC
JDeveloper 10.1.3.1
Thanks
Message was edited by:
RJundi

Hi,
Meybe this article helps: http://technology.amis.nl/blog/?p=2306
Kuba

Derived Table creation

Hi, we are working on Business Objects Migration 6.1 to BOXIR2 project.plz any one help me Derived table creation for Free Hand SQL Reports?.How to use promt functions also.........?
Thanks for advance....
Thanks&Regards
Ramu

Ramu,
Your question is posted in the General forum, but I think you might want to close this entry and re-post in one of the two following forums:
Web Intelligence
[SAP BusinessObjects Web Intelligence;
Universe Designer & Business Views Designer
[Semantic Layer;
Thanks,
John

Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

972471 wrote:
Static Tables Creation In oracle & Diff Between Static table ,Dynamic tableAll tables in a well designed application should be static tables.
Whilst it's possible to execute dynamic code and therefore create tables dynamically at run time, this is considered poor design and should be avoided in 99.99% of cases... though for some reason some people still think they need to do this, and it's never really justified.
So what issue are you facing that you need to even bother considering dynamic tables?

Can Oracle 9i enable schema/table creation to be transacted?

If anyone can help with this, that would be much appreciated.
So - the server has disabled autocommit and commits/rollbacks are handled by the application. Even though this is the case, Oracle 9i is not rolling back changes that have (i) created schemas/users and/or (ii) tables.
Worse still, it seems to be performing a partial rollback - some tables in a schema are left with data and others are not.
Now, this may be caused by our server creating tables for indexing while adding data to some existing tables - that is the table definitions have auto-committed the transaction to date, also committing the table insertions/updates.
After some delving, the JDBC driver has the following method: dataDefinitionCausesTransactionCommit - for Pointbase and other databases, this returns false - for Oracle it returns true.
The questions are therefore:
1) Is there a solution with Oracle 9i that enables schema and table creation to be transacted?
2) Does Oracle 10g allow definition clauses to be transacted?

Actually I believe there is a limited way to make DDL statements transaction based via the CREATE SCHEMA command.
From the 9.2 SQL manaul >>
Use the CREATE SCHEMA to create multiple tables and views and perform multiple grants in a single transaction.
To execute a CREATE SCHEMA statement, Oracle executes each included statement. If all statements execute successfully, Oracle commits the transaction. If any statement results in an error, Oracle rolls back all the statements.
<<
This may be of some limited use to you, but your process should probably be changed to track of the DDL and to undo (drop) any created objects if a rollback is issued.
HTH -- Mark D Powel --

Table creation in sap ui5

Hi,
I am new at SAP UI5 and i am trying to create a table.
I used the code given on the sap ui5 demokit but when i am running the application the table is not displaying.
can anyone help me with this.
Thanks in advance.
var aData = [
          {lastName: "Dente", name: "Al", gender : "male"},
          {lastName: "Friese", name: "Andy", gender : "female"},
          {lastName: "Mann", name: "Anita", gender : "female"}
//table creation
var oTable = new sap.ui.table.Table({
title: "Guest House list",
visibleRowCount: 3,
firstVisibleRow: 2,
selectionMode: sap.ui.table.SelectionMode.Single,
//column creation
oTable.addColumn(new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: "Last Name"}),
template: new sap.ui.commons.TextView().bindProperty("text", "lastName"),
sortProperty: "lastName",
filterProperty: "lastName",
width: "200px"
oTable.addColumn(new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: "First Name"}),
template: new sap.ui.commons.TextField().bindProperty("value", "name"),
sortProperty: "name",
filterProperty: "name",
width: "100px"
oTable.addColumn(new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: "Gender"}),
template: new sap.ui.commons.ComboBox({items: [
new sap.ui.core.ListItem({text: "female"}),
new sap.ui.core.ListItem({text: "male"})
]}).bindProperty("value","gender"),
sortProperty: "gender",
filterProperty: "gender"
//data collection
var oModel = new sap.ui.model.json.JSONModel();
oModel.setData({modelData: aData});
oTable.setModel(oModel);
oTable.bindRows("/modelData");
//Initially sort the table
oTable.sort(oTable.getColumns()[0]);
oTable.placeAt("table");

Hi Anshul
it should be
press: function() {
   oTable.setVisible(true); // or false
am I right?
-D

PointBase automatic table creation mapping reliability?

If I specify this in the weblogic-cmp-rdbms-jar.xml file for Automatic Table Creation:
<field-map>
<cmp-field>ADDRESS</cmp-field>
<dbms-column>U_ADDRESS</dbms-column>
<dbms-column-type>VARCHAR(30)</dbms-column-type>
</field-map>
<field-map>
<cmp-field>addresses</cmp-field>
<dbms-column>U_ADDRESSES</dbms-column>
<dbms-column-type>RAW(5000)</dbms-column-type>
</field-map>
<create-default-dbms-tables>True</create-default-dbms-tables>
PointBase creates a table w/ the two columns defined as:
U_ADDRESS VARCHAR(150)
U_ADDRESSES BLOB(1000)
If I specify this:
<field-map>
<cmp-field>ADDRESS</cmp-field>
<dbms-column>U_ADDRESS</dbms-column>
<dbms-column-type>VARCHAR(30)</dbms-column-type>
</field-map>
<field-map>
<cmp-field>addresses</cmp-field>
<dbms-column>U_ADDRESSES</dbms-column>
<dbms-column-type>RAW(5000)</dbms-column-type>
</field-map>
<create-default-dbms-tables>True</create-default-dbms-tables>
<database-type>POINTBASE</database-type>
PointBase creates a table w/ the two columns defined as:
U_ADDRESS VARCHAR(150)
U_ADDRESSES BLOB(1)
What's wrong? And how reliable is the PointBase mapping?

Hi
The <dbms-column-type> is not intended for generally specifying
the desired column type for the cmp-field. It is meant to
cause the container to generate code to handle the cmp-field
as a java.sql.Blob in the persistence layer.
What the default table creation does is to examine the
java type of the cmp-field and then make its best guess
at a DBMS column type that will support the cmp-field.
In the case of POINTBASE, byte[] fields are made into
BLOB.
Here's the conversion that the container uses to map
java types to POINTBASE Column types:
if(type.isPrimitive()) {
if(type == Boolean.TYPE) return "BOOLEAN";
if(type == Byte.TYPE) return "SMALLINT";
if(type == Character.TYPE) return "CHAR(1)";
if(type == Double.TYPE) return "DOUBLE PRECISION";
if(type == Float.TYPE) return "FLOAT";
if(type == Integer.TYPE) return "INTEGER";
if(type == Long.TYPE) return "DECIMAL"; // PointBase DECIMAL is DECIMAL(38,0)
// 10**38 is approx: 2**126
it's big enough
if(type == Short.TYPE) return "SMALLINT";
} else {
if (type == String.class) return "VARCHAR(150)";
if (type == BigDecimal.class) return "DECIMAL(38,19)";
if (type == Boolean.class) return "BOOLEAN";
if (type == Byte.class) return "SMALLINT";
if (type == Character.class) return "CHAR(1)";
if (type == Double.class) return "DOUBLE PRECISION";
if (type == Float.class) return "FLOAT";
if (type == Integer.class) return "INTEGER";
if (type == Long.class) return "DECIMAL";
if (type == Short.class) return "SMALLINT";
if (type == java.util.Date.class)return "DATE";
if (type == java.sql.Date.class) return "DATE";
if (type == java.sql.Time.class) return "TIME";
if (type == java.sql.Timestamp.class) return "TIMESTAMP";
if (type.isArray() &&
type.getComponentType() == Byte.TYPE) return "BLOB";
if (!ClassUtils.isValidSQLType(type) &&
java.io.Serializable.class.isAssignableFrom(type)) return "BLOB";
"Brian L" <[email protected]> wrote:
>
If I specify this in the weblogic-cmp-rdbms-jar.xml file for Automatic Table
Creation:
<field-map>
<cmp-field>ADDRESS</cmp-field>
<dbms-column>U_ADDRESS</dbms-column>
<dbms-column-type>VARCHAR(30)</dbms-column-type>
</field-map>
<field-map>
<cmp-field>addresses</cmp-field>
<dbms-column>U_ADDRESSES</dbms-column>
<dbms-column-type>RAW(5000)</dbms-column-type>
</field-map>
<create-default-dbms-tables>True</create-default-dbms-tables>
PointBase creates a table w/ the two columns defined as:
U_ADDRESS VARCHAR(150)
U_ADDRESSES BLOB(1000)
If I specify this:
<field-map>
<cmp-field>ADDRESS</cmp-field>
<dbms-column>U_ADDRESS</dbms-column>
<dbms-column-type>VARCHAR(30)</dbms-column-type>
</field-map>
<field-map>
<cmp-field>addresses</cmp-field>
<dbms-column>U_ADDRESSES</dbms-column>
<dbms-column-type>RAW(5000)</dbms-column-type>
</field-map>
<create-default-dbms-tables>True</create-default-dbms-tables>
<database-type>POINTBASE</database-type>
PointBase creates a table w/ the two columns defined as:
U_ADDRESS VARCHAR(150)
U_ADDRESSES BLOB(1)
What's wrong? And how reliable is the PointBase mapping?

Problem with table creation using CTAS parallel hint

Hi,
We have a base table (CARDS_TAB) with 1,083,565,232 rows, and created a replica table called T_CARDS_NEW_201111. But the count in new table is 1,083,566,976 the difference is 1744 additional row. I have no idea how the new table can contain more rows compared to original table!!
Oracle version is 11.2.0.2.0.
Both table count were taken after table creation. Script that was used to create replica table is:
CREATE TABLE T_CARDS_NEW_201111
TABLESPACE T_DATA_XLARGE07
PARTITION BY RANGE (CPS01_DATE_GENERATED)
SUBPARTITION BY LIST (CPS01_CURRENT_STATUS)
SUBPARTITION TEMPLATE
(SUBPARTITION T_NULL VALUES (NULL),
   SUBPARTITION T_0 VALUES (0),
   SUBPARTITION T_1 VALUES (1),
   SUBPARTITION T_3 VALUES (3),
   SUBPARTITION T_OTHERS VALUES (DEFAULT)
PARTITION T_200612 VALUES LESS THAN (TO_DATE(' 2007-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    TABLESPACE T_DATA_XLARGE07
( SUBPARTITION T_200612_T_NULL VALUES (NULL)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200612_T_0 VALUES (0)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200612_T_1 VALUES (1)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200612_T_3 VALUES (3)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200612_T_OTHERS VALUES (DEFAULT)    TABLESPACE T_DATA_XLARGE07 ),
PARTITION T_200701 VALUES LESS THAN (TO_DATE(' 2007-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    TABLESPACE T_DATA_XLARGE07
( SUBPARTITION T_200701_T_NULL VALUES (NULL)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200701_T_0 VALUES (0)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200701_T_1 VALUES (1)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200701_T_3 VALUES (3)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_200701_T_OTHERS VALUES (DEFAULT)    TABLESPACE T_DATA_XLARGE07 )
PARTITION T_201211 VALUES LESS THAN (TO_DATE(' 2012-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    TABLESPACE T_DATA_XLARGE07
( SUBPARTITION T_201211_T_NULL VALUES (NULL)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201211_T_0 VALUES (0)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201211_T_1 VALUES (1)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201211_T_3 VALUES (3)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201211_T_OTHERS VALUES (DEFAULT)    TABLESPACE T_DATA_XLARGE07 ),
PARTITION T_201212 VALUES LESS THAN (TO_DATE(' 2013-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    TABLESPACE T_DATA_XLARGE07
( SUBPARTITION T_201212_T_NULL VALUES (NULL)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201212_T_0 VALUES (0)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201212_T_1 VALUES (1)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201212_T_3 VALUES (3)    TABLESPACE T_DATA_XLARGE07,
    SUBPARTITION T_201212_T_OTHERS VALUES (DEFAULT)    TABLESPACE T_DATA_XLARGE07 )
NOCACHE
NOPARALLEL
MONITORING
ENABLE ROW MOVEMENT
AS
SELECT /*+ PARALLEL (T,40) */ SERIAL_NUMBER     ,
PIN_NUMBER        ,
CARD_TYPE         ,
DENOMINATION      ,
DATE_GENERATED    ,
LOG_PHY_IND       ,
CARD_ID           ,
OUTLET_CODE       ,
MSISDN            ,
BATCH_NUMBER      ,
DATE_SOLD         ,
DIST_CHANNEL      ,
DATE_CEASED       ,
DATE_PRINTED      ,
DATE_RECHARGE     ,
LOGICAL_ORDER_NR ,
DATE_AVAILABLE    ,
CURRENT_STATUS    ,
ACCESS_CODE        from CARDS_TAB T
/Also base table CARDS_TAB has a primary key on SERIAL_NUMBER column. when trying to create a primary key on new table it throws exception:
ALTER TABLE T_CARDS_NEW_201111 ADD
CONSTRAINT T_PK2_1
PRIMARY KEY (SERIAL_NUMBER) USING INDEX
TABLESPACE T_INDEX_XLARGE07
PARALLEL 10 NOLOGGING;
CONSTRAINT TP_PK2_1
ERROR at line 2:
ORA-02437: cannot validate (T_PK2_1) - primary key violatedThanks in advance.
With Regards,
Farooq Abdulla

For parallel processing the documentation suggests the use of automatic degree of parallelism (determined by the system at run time) or choosing a power of 2 value
Look at Florian's post in yours presently neighbour post How to Delete Duplicate rows from a Table to locate the violations (seemingly due to parallel processing)
Regards
Etbin

Need of buffering in table creation.

what is need of buffering in table creation and data class and delivey class

Definition
The name table (nametab) contains the table and field definitions that are activated in the SAP System. An entry is made in the Repository buffer when a mass activator or a user (using the ABAP Dictionary, Transaction SE11) requests to activate a table. The corresponding name table is then generated from the information that is managed in the Repository.
The Repository buffer is mainly known as the nametab buffer (NTAB), but it is also known as the ABAP Dictionary buffer
The description of a table in the Repository is distributed among several tables (for field definition, data element definition and domain definition). This information is summarized in the name table. The name table is saved in the following database tables:
DDNTT (table definitions)
DDNTF (field descriptions)
The Repository buffer consists of four buffers in shared memory, one for each of the following:
Table definitions TTAB buffer Table DDNTT
Field descriptions FTAB buffer Table DDNTF
Initial record layouts IREC buffer Contains the record layout initialized depending on the field type
There are two kinds of table buffers:
Partial table buffers
Generic table buffers
Check this link for more details.
http://www.abapprogramming.blogspot.com/2007/11/buffering-in-sap-abap.html
Regards,

Table creation by ouser

Similar Messages

Maybe you are looking for