Table Data Output
Hi!
Our maintenance table has the following structure:
M_ID Maintenance Frequency
1 Check oil 1
1 Check oil 2
1 Check oil 3
Frequency means the day of the week. However, the output of the job should be like this:
Check oil 123
And if job is not done on one day:
Check oil 123----
How can we do this?
Thank you!
Try to look for "aggregation technique" on the forum side with search function (at the top right of the current page).
Nicolas.
Similar Messages
-
How to Convert internal table data into text output and send mail in ABAP
Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VThere's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
* -------- create persistent send request ------------------------
gv_send_request = cl_bcs=>create_persistent( ).
* -------- create and set document -------------------------------
* create text to be sent
wa_line = text-001.
APPEND wa_line TO gt_text.
CLEAR wa_line.
APPEND wa_line TO gt_text.
LOOP AT gt_fail ASSIGNING <fs_fail>.
MOVE <fs_fail>-retry_count TO gv_count.
CONCATENATE text-002
<fs_fail>-setting_id
text-003
gv_count
INTO wa_line SEPARATED BY space.
APPEND wa_line TO gt_text.
CLEAR wa_line.
ENDLOOP.
APPEND wa_line TO gt_text.
wa_line = text-007.
APPEND wa_line TO gt_text.
* create actual document
gv_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = gt_text
i_length = '12'
i_subject = 'Failed Precalculation Settings!' ).
* add document to send request
CALL METHOD gv_send_request->set_document( gv_document ).
* --------- set sender -------------------------------------------
gv_sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD gv_send_request->set_sender
EXPORTING
i_sender = gv_sender.
* --------- add recipient (e-mail address) -----------------------
LOOP AT s_email INTO wa_email.
MOVE wa_email-low TO gv_email.
gv_recipient = cl_cam_address_bcs=>create_internet_address(
gv_email ).
CALL METHOD gv_send_request->add_recipient
EXPORTING
i_recipient = gv_recipient
i_express = 'X'.
ENDLOOP.
* ---------- set to send immediately -----------------------------
CALL METHOD gv_send_request->set_send_immediately( 'X' ).
* ---------- send document ---------------------------------------
CALL METHOD gv_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE text-004.
ENDIF.
COMMIT WORK.
* exception handling
CATCH cx_bcs INTO gv_bcs_exception.
WRITE: text-005.
WRITE: text-006, gv_bcs_exception->error_type.
EXIT.
ENDTRY.
with the following declarations
* TABLES *
TABLES:
adr6,
rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS *
DATA:
gt_fail TYPE SORTED TABLE OF rsr_prec_sett
WITH UNIQUE KEY setting_id run_date,
gt_text TYPE bcsy_text,
wa_fail LIKE LINE OF gt_fail,
wa_line(90) TYPE c.
FIELD-SYMBOLS:
<fs_fail> LIKE LINE OF gt_fail.
* VARIABLES *
DATA:
gv_count(4) TYPE n,
gv_send_request TYPE REF TO cl_bcs,
gv_document TYPE REF TO cl_document_bcs,
gv_sender TYPE REF TO cl_sapuser_bcs,
gv_recipient TYPE REF TO if_recipient_bcs,
gv_email TYPE adr6-smtp_addr,
gv_bcs_exception TYPE REF TO cx_bcs,
gv_sent_to_all TYPE os_boolean.
* SELECTION-SCREEN *
SELECT-OPTIONS:
s_email FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
wa_email LIKE LINE OF s_email. -
XML data output in a custom grid table
Hi!
I was wondering if it is possible to display xml data output in a custom-made grid table? Important is the ability to
arrange the fields on the grid layout (not a fixed layout with columns and rows).
I am using the latest JDeveloper release.
Thanks!See [url http://docs.oracle.com/cd/E14072_01/server.112/e10592/functions251.htm#CIHGGHFB]XMLTABLE
For example:
-- INSERT INTO <your table name>
WITH x AS
(SELECT XMLTYPE('<?xml version="1.0"?>
<ROWSET>
<ROW>
<EMPNO>7782</EMPNO>
<ENAME>CLARK</ENAME>
<JOB>MANAGER</JOB>
<MGR>7839</MGR>
<HIREDATE>09-JUN-81</HIREDATE>
<SAL>2450</SAL>
<DEPTNO>10</DEPTNO>
</ROW>
<ROW>
<EMPNO>7839</EMPNO>
<ENAME>KING</ENAME>
<JOB>PRESIDENT</JOB>
<HIREDATE>17-NOV-81</HIREDATE>
<SAL>5000</SAL>
<DEPTNO>10</DEPTNO>
</ROW>
<ROW>
<EMPNO>7934</EMPNO>
<ENAME>MILLER</ENAME>
<JOB>CLERK</JOB>
<MGR>7782</MGR>
<HIREDATE>23-JAN-82</HIREDATE>
<SAL>1300</SAL>
<DEPTNO>10</DEPTNO>
</ROW>
</ROWSET>') myxml
FROM DUAL)
SELECT *
FROM x
, XMLTABLE('/ROWSET/ROW'
PASSING x.myxml
COLUMNS empno, ename, job, mgr, hiredate, sal, deptno); -
How to get the plsql table data into output cursor
Hi,
Could anybody please help me.
Below is an example of the scenario..
CREATE OR REPLACE PACKAGE chck IS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR);
TYPE get_rec is record (ename varchar2(20),
eno number(12));
TYPE t_recs IS TABLE OF get_rec INDEX BY BINARY_INTEGER;
emp_tab t_recs;
END chck;
CREATE OR REPLACE PACKAGE BODY chck AS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR)
is
BEGIN
select ename, eno
bulk collect into emp_tab
from emp;
open oc_result_cursor for select * from table(emp_tab); -- I believe something is wrong here ....
END;
END chck;
the above package is giving me an error:
LINE/COL ERROR
10/29 PL/SQL: SQL Statement ignored
10/43 PL/SQL: ORA-22905: cannot access rows from a non-nested table
item
let me know what needs to be changed
Thanks
Manjumanjukn wrote:
once i get the data into a plsql table, how to get this plsql table data into the cursor?There is no such thing as a PL/SQL table - it is an array.
It is nothing at all like a table. It cannot be indexed, partitioned, cluster, etc. It does not exist in the SQL engine as an object that can be referenced. It resides in expensive PGA memory and needs to be copied (lock, stock and barrel) to the SQL engine as a bind variable.
It is an extremely primitive structure - and should never be confused as being just like a table.
Its use in SQL statements is also an exception to the rule. Sound and valid technical reasons need to justify why one want to push a PL/SQL array to the SQL engine to run SELECT 's against it. -
Create XML file from table data
Dear All,
with dataservice 4.0, I want to create an XML file from a table data.
Table have a single column but more record, for example:
0001000488;100;EUR;
0001000489;200;EUR;
0001000450;300;EUR;
My desired XML output:
<Data>
0001000488;100;GBP;
0001000489;200;EUR;
0001000450;300;EUR;
</Data>
I try with a sample query but the sistem write only the last record in XML file:
<Data>
0001000450;300;EUR;
</Data>
Can everyone help me?
Thank in advance.
SimoneHello
That is a very simple (also odd) XML document structure, and as such doesn't require use of the XML target. It can be easily acheived by writing a normal file with a header and footer, which is acheived using a row_generation and a query to generate the hard coded open and close tags.
Michael -
Excel issues with importing CSV or HTML table data from URL - Sharepoint? Office365?
Greetings,
We have a client who is having issues importing CSV or HTML table data as one would do using Excel's Web Query import from a reporting application. As the error message provided by Excel is unhelpful I'm reaching out to anyone who can help us begin to
troubleshoot problems affecting what is normal standard Excel functionality. I'd attach the error screenshot, but I can't because my account is not verified....needless to say it says "Microsoft Excel cannot access the file https://www.avantalytics.com/reporting_handler?func=wquery&format=csv&logid=XXXX&key=MD5
Where XXXX is a number and MD5 is an md5 code. The symptoms stated in the error message are:
- the file name or path does not exist
-The file is being used by another program
-The workbook you are trying to save has the same name as a currently open workbook.
None of these symptoms are the case, naturally. The user encountered this with Excel2010, she was then upgraded to Excel2013 and is still experiencing the same issue. The output of this URL in a browser (IE, Chrome, Firefox) is CSV data for the affected
user, so it is not a network connectivity issue. In our testing environment using both Excel2010 or 2013 this file is imported successfully, so we cannot replicate. The main difference I can determine between our test environment and the end-user
is they have a Sharepoint installation and appear to have Office365 as well.
So, my question might more appropriately be for Sharepoint or Office365 folks, but I can't be sure they're a culprit. Given this - does anyone have any knowledge of issues which might cause this with Sharepoint or Office365 integrated with
Excel and/or have suggestions for getting more information from Excel or Windows other than this error message? I've added the domain name as a trusted publisher in IE as I thought that might be the issue, but that hasn't solved anything. As you
can see its already https and there is no authentication or login - the md5 key is the authentication. The certificate for the application endpoint is valid and registered via GoDaddy CA.
I'm at a loss and would love some suggestions on things to check/try.
Thanks -RossHi Ross,
>> In our testing environment using both Excel 2010 and 2013 this file is imported successfully, so we cannot replicate.
I suspect it is caused by the difference of web server security settings.
KB: Error message when you use Web query to a secure Web page (HTTPS://) in Excel: "Unable to open"
Hope it will help.
By the way, this forum is mainly for discussing questions about Office Development (VSTO, VBA and Apps for Office .etc.). For Office products feature specific questions, you could consider posting them on
Office IT Pro forum or Microsoft Office Community.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problem with pl/sql table data type
hai friends,
i have one procedure it has some in parameters and one out parameter which fetches values to front end.
But the out parameter will be pl/sql table data type.
if it is ref cursor
then i declared as
var x refcursor;
exec procedure_name(1,:x);
it is ok.
but for pl/sql table data type is out parameter then what i will do in the prompt .
give me syntax and clarify my doubt.
advanced thanks...
madhavaThe SQL*Plus VARIABLE statement does not support user-defined types, hence it cannot support nested tables. It can support cursors because they can be weakly typed (so we can use the one SQL*Plus VAR to hold any shape of resultset). Nested tables are strongly typed; SQL*Plus is a relatively stupid interface and cannot be expected to understand UDT.
So, it you want to use nested tables as output you'll need to code a wrapping procedure that can understand your nested table type and handle it accordingly.
Sorry.
Cheers, APC -
Report is executing in background and need data(output) in excel format
Report is executing in background and need data(output) to get downloaded in excel format in my PC from an internal table;;in any drive i.e. C: or D: .When executing in backround it prompt to user with which location excel file to be saved and the name of file.How to download in background in excel format?
Edited by: PRASHANT BHATNAGAR on Aug 26, 2008 6:24 AMHi
Download a report to excel with format (border, color cell, etc)
Try this program...it may help you to change the font ..etc.
Code:
REPORT ZSIRI NO STANDARD PAGE HEADING.
this report demonstrates how to send some ABAP data to an
EXCEL sheet using OLE automation.
INCLUDE OLE2INCL.
handles for OLE objects
DATA: H_EXCEL TYPE OLE2_OBJECT, " Excel object
H_MAPL TYPE OLE2_OBJECT, " list of workbooks
H_MAP TYPE OLE2_OBJECT, " workbook
H_ZL TYPE OLE2_OBJECT, " cell
H_F TYPE OLE2_OBJECT. " font
TABLES: SPFLI.
DATA H TYPE I.
table of flights
DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
*& Event START-OF-SELECTION
START-OF-SELECTION.
read flights
SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
display header
ULINE (61).
WRITE: / SY-VLINE NO-GAP,
(3) 'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
(4) 'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
(20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
(20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
(8) 'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
ULINE /(61).
display flights
LOOP AT IT_SPFLI.
WRITE: / SY-VLINE NO-GAP,
IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
ENDLOOP.
ULINE /(61).
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-007
EXCEPTIONS
OTHERS = 1.
start Excel
CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
PERFORM ERR_HDL.
SET PROPERTY OF H_EXCEL 'Visible' = 1.
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-008
EXCEPTIONS
OTHERS = 1.
get list of workbooks, initially empty
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP.
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-009
EXCEPTIONS
OTHERS = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
H = SY-TABIX + 1.
PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - start
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP EXPORTING #1 = 2.
PERFORM ERR_HDL.
tell user what is going on
SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-009
EXCEPTIONS
OTHERS = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
H = SY-TABIX + 1.
PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - end
disconnect from Excel
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'C:\SKV.XLS'.
FREE OBJECT H_EXCEL.
PERFORM ERR_HDL.
FORM FILL_CELL *
sets cell at coordinates i,j to value val boldtype bold *
FORM FILL_CELL USING I J BOLD VAL.
CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL.
SET PROPERTY OF H_ZL 'Value' = VAL .
PERFORM ERR_HDL.
GET PROPERTY OF H_ZL 'Font' = H_F.
PERFORM ERR_HDL.
SET PROPERTY OF H_F 'Bold' = BOLD .
PERFORM ERR_HDL.
ENDFORM.
*& Form ERR_HDL
outputs OLE error if any *
--> p1 text
<-- p2 text
FORM ERR_HDL.
IF SY-SUBRC <> 0.
WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
STOP.
ENDIF.
ENDFORM. " ERR_HDL
Regards
Murali Papana -
Problem in converting table data into CSV file
Hi All,
In my Process i need to convert my error table data into csv file,my data is converted as csv file by using OdisqlUnload function,but the column headers are not converted,i use another procedure for converting column headers but iam getting below error ...
com.sunopsis.sql.SnpsMissingParametersException: Missing parameter string.find, string.find
SQL: import string import java.sql as sql import java.lang as lang import re sourceConnection = odiRef.getJDBCConnection("SRC") output_write=open('C:/Oracle/Middleware/Oracle_ODI2/oracledi/pro/PRO.txt','r+') myStmt = sourceConnection.createStatement() my_query = "select * FROM E$_LOCAL_F0911Z1" my_query=my_query.upper() if string.find(my_query, '*') > 0: myRs = myStmt.executeQuery(my_query) md=myRs.getMetaData() collect=[] i=1 while (i <= md.getColumnCount()): collect.append(md.getColumnName(i)) i += 1 header=','.join(map(string.strip, collect)) elif string.find(my_query,'||') > 0: header = my_query[7:string.find(my_query, 'FROM')].replace("||','||",',') else: header = my_query[7:string.find(my_query, 'FROM')] print header old=output_write.read() output_write.seek(0) output_write.write (header+'\n'+old) sourceConnection.close() output_write.close()
And i used below code for converting.......
import string
import java.sql as sql
import java.lang as lang
import re
sourceConnection = odiRef.getJDBCConnection("SRC")
output_write=open('C:/Oracle/Middleware/Oracle_ODI2/oracledi/pro/PRO.txt','r+')
myStmt = sourceConnection.createStatement()
my_query = "select FROM E$_COMPANY"*
*my_query=my_query.upper()*
*if string.find(my_query, '*') > 0:*
*myRs = myStmt.executeQuery(my_query)*
*md=myRs.getMetaData()*
*collect=[]*
*i=1*
*while (i <= md.getColumnCount()):*
*collect.append(md.getColumnName(i))*
*i += 1*
*header=','.join(map(string.strip, collect))*
*elif string.find(my_query,'||') > 0:*
*header = my_query[7:string.find(my_query, 'FROM')].replace("||','||",',')*
*else:*
*header = my_query[7:string.find(my_query, 'FROM')]*
*print header*
*old=output_write.read()*
*output_write.seek(0)*
*output_write.write (header+'\n'+old)*
*sourceConnection.close()*
*output_write.close()*
Any one can you help regarding this
Edited by: 30021986 on Oct 1, 2012 6:04 PMThis may not be an option for you but in pinch you may want to consider outputing your data to an MS Spreadsheet, then saving it as a CSV. It's somewhat of a cumbersome process, but it will get you by for now.
You will need to change your content type to application/vnd.ms-excel.
<% response.setContentType("application/vnd.ms-excel"); %> -
How to pull data output of TCODE "MRKO" into a BI Cube.....??
Hi Gurus:
One of the business requirement is to EXTRACT data from relevant tables that the R/3 TCode "MRKO" provides in a report format in to BI. I don't tknow if there is any std. SAP extractor that would provide me the details. We need this data to determine the payment DATE based on "Payment Terms" using a logic, then summarize the data at each Vendor level and pass this information to the BI Cube. We need this information for a Cash Flow Forecasting project.
I am not familiar with the Tcode MRKO or the program. I would appreciate it if anyone can shed some light here. I basically need a Total Due amount for a month period, Vendor, The date on which the payment has to be made in future based on the Payment terms and Company code. I don't know the tables involved, but the TCODE provides a "Total" per Vendor and thats what I would like to capture and pass to BI. How can I achieve this?
Appreciate the name of the STD extractor if one exists or the table(s), and if any logic is necessary.....?
Thanks a lot in advance.....!
PBSWHI,
I am not aware of any standard extractor for the report that you get from Tcode MRKO, But I can suggest you in a very customized way to extract the data into BW.
When you run the transaction "MRKO", please check the program that is running in the background for that report to run and get the data output. You could easily find from the lower side menu bar.
Once if you get to know the program, create a structure and create a datasource assigned to that structure, where the datasource uses funcion module as its extraction method. In SAP you can easily convert a program into a function module and let the extractor fill your datasource for extraction.
- Another way of doing it, is to find out the tables that it is retrieving from the report MRKO and create a structure with those fields filled up using a function module. And then use that structure and function module for your new datasource to extract. -
How to show data output in SSRS
Below is my simply query. I need to use Matrix SSRS format. I will put "Region" in "row" column, Header will use "Customer_Requested_Date" field, and will use "Amount" in the data session.
The data output in the "Header" field will show January.....until December (current month is December). In the Amount field under "December" (current month), I need to compute the formula like "Customer_Request_Month"
< = Current Month". (I do not have the field name called Current Month, need to get a Date/Time function to display Current Month).
How I can come up the data output under December Header field to show the current Amount in that section?
November, 2014
December,2014
Region
Amount
CRD Month < = Current Month
Select
Customer_Request _Date,
Customer_request_Month,
Transaction_Type,
Region,
Amount
From Table
Thanks,
Josephine
Josey TangHi Josey,
According to your descritption, you want to show the current month in your tablix. Right?
In Reporting Services, we can use the Now() and datepart() function to get the current month. Please use the expression below:
=Datepart("m",Now())
In this scenario, since you want to show the amount of current month within the column group, you need to create another dataset which always show the data of current month. Then you can use lookup() function to get the amount value from the current dataset
based on the Region. Please follow the steps below:
Create a same dataset(DataSet2) using your query. Add a filter on this dataset. Make Fields!Customer_request_Month.Value
=
Datepart("m",Now())
Then add a column inside of column group, using the expression below:
=lookup(Fields!Region.Value,Fields!Region.Value,Fields!Amount.Value,"DataSet2")
The design and result look like below:
Reference:
Expression Examples (Report Builder and SSRS)
Lookup Function (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Hi
I have a requirement of writing internal table data to XML. Any idea where i should start.
I have pretty good experience with ABAP and basic knowledge in XML.
There are good blogs which talk about transformations and other stuff but they are not able to give me clear path to my solution.
Could somebody give me a basic example or some reference material where i can move the data in internal table (assume Sales order details of a day) to XML.
ThanksRefer the program -
In this implementation we will only focus on the creation of the XML file and the transfer to the user. You can not create a XML document directly. You have to use a so called ixml factory first.
TYPE-POOLS: ixml.
DATA: l_ixml TYPE REF TO if_ixml.
l_ixml = cl_ixml=>create( ).
This iXML factory can create an empty XML document object named l_document.
DATA: l_document TYPE REF TO if_ixml_document.
l_document = l_ixml->create_document( ).
At this point you can add the nodes (elements, attributes) into the document. First you have to declare the root element node.
DATA: l_element_root TYPE REF TO if_ixml_element.
This node we have to give a name and add it (create_simple_node) to the document object l_document, which will be the parent of this node.
l_element_root = l_document->create_simple_element(
name = 'flights'
parent = l_document ).
Next we can add child nodes to there parent node using the same method of the document object.
DATA: l_element_airline TYPE REF TO if_ixml_element,
l_element_airline = l_document->create_simple_element(
name = 'airline'
parent = l_element_root ).
An attribute can be add easily using the method set_attribute of the element node.
l_rc = l_element_airline->set_attribute( name = 'code' value = 'LH401' ).
Now we have finished the document object. Regretfully it can not be displayed in any form due to the fact that it is a binary object.
The next step is to convert the created document to a flat file. To achieve this we have to create a stream factory, which will help us to create an output stream.
DATA: l_streamfactory TYPE REF TO if_ixml_stream_factory.
l_streamfactory = l_ixml->create_stream_factory( ).
In this case, we will convert the document into an output stream which is based on an internal table of type x.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i,
l_ostream TYPE REF TO if_ixml_ostream.
l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
When we have created the output stream we can do the rendering from the document into the stream. The XML data will be stored in the internal table automatically.
DATA: l_renderer TYPE REF TO if_ixml_renderer.
l_renderer = l_ixml->create_renderer( ostream = l_ostream
& nbsp; document = l_document ).
l_rc = l_renderer->render( ).
In the last step we upload the file to the sapgui
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = 'c:\temp\flights.xml'
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
This finished the first step-of-three. As mentioned before the next log will focus on the conversion from xml files (back) to abap tables.
REPORT z_xit_xml_dom_create.
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_ostream TYPE REF TO if_ixml_ostream,
l_renderer TYPE REF TO if_ixml_renderer,
l_document TYPE REF TO if_ixml_document.
DATA: l_element_flights TYPE REF TO if_ixml_element,
l_element_airline TYPE REF TO if_ixml_element,
l_element_flight TYPE REF TO if_ixml_element,
l_element_from TYPE REF TO if_ixml_element,
l_element_to TYPE REF TO if_ixml_element,
l_element_dummy TYPE REF TO if_ixml_element,
l_value TYPE string.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i.
DATA: lt_spfli TYPE TABLE OF spfli.
DATA: l_spfli TYPE spfli.
START-OF-SELECTION.
Fill the internal table
SELECT * FROM spfli INTO TABLE lt_spfli.
Sort internal table
SORT lt_spfli BY carrid.
Start filling xml dom object from internal table
LOOP AT lt_spfli INTO l_spfli.
AT FIRST.
Creating a ixml factory
l_ixml = cl_ixml=>create( ).
Creating the dom object model
l_document = l_ixml->create_document( ).
Fill root node with value flights
l_element_flights = l_document->create_simple_element(
name = 'flights'
parent = l_document ).
ENDAT.
AT NEW carrid.
Create element 'airline' as child of 'flights'
l_element_airline = l_document->create_simple_element(
name = 'airline'
parent = l_element_flights ).
Create attribute 'code' of node 'airline'
l_value = l_spfli-carrid.
l_rc = l_element_airline->set_attribute( name = 'code' value = l_value ).
Create attribute 'name' of node 'airline'
SELECT SINGLE carrname FROM scarr INTO l_value WHERE carrid EQ l_spfli-carrid.
l_rc = l_element_airline->set_attribute( name = 'name' value = l_value ).
ENDAT.
AT NEW connid.
Create element 'flight' as child of 'airline'
l_element_flight = l_document->create_simple_element(
name = 'flight'
parent = l_element_airline ).
Create attribute 'number' of node 'flight'
l_value = l_spfli-connid.
l_rc = l_element_flight->set_attribute( name = 'number' value = l_value ).
ENDAT.
Create element 'from' as child of 'flight'
CONCATENATE l_spfli-cityfrom ',' l_spfli-countryfr INTO l_value.
l_element_from = l_document->create_simple_element(
name = 'from'
value = l_value
parent = l_element_flight ).
Create attribute 'airport' of node 'from'
l_value = l_spfli-airpfrom.
l_rc = l_element_from->set_attribute( name = 'airport' value = l_value ).
Create element 'to' as child of 'flight'
CONCATENATE l_spfli-cityto ',' l_spfli-countryto INTO l_value.
l_element_to = l_document->create_simple_element(
name = 'to'
value = l_value
parent = l_element_flight ).
Create attribute 'airport' of node 'from'
l_value = l_spfli-airpto.
l_rc = l_element_to->set_attribute( name = 'airport' value = l_value ).
Create element 'departure' as child of 'flight'
l_value = l_spfli-deptime.
l_element_dummy = l_document->create_simple_element(
name = 'departure'
value = l_value
parent = l_element_flight ).
Create element 'arrival' as child of 'flight'
l_value = l_spfli-arrtime.
l_element_dummy = l_document->create_simple_element(
name = 'arrival'
value = l_value
parent = l_element_flight ).
Create element 'type' as child of 'flight'
CASE l_spfli-fltype.
WHEN 'X'.
l_value = 'Charter'.
WHEN OTHERS.
l_value = 'Scheduled'.
ENDCASE.
l_element_dummy = l_document->create_simple_element(
name = 'type'
value = l_value
parent = l_element_flight ).
ENDLOOP.
IF sy-subrc NE 0.
MESSAGE 'No data into db table ''spfli'', please run program ''SAPBC_DATA_GENERATOR'' with transaction ''SA38''' TYPE 'E'.
ENDIF.
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
Connect internal XML table to stream factory
l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
Rendering the document
l_renderer = l_ixml->create_renderer( ostream = l_ostream
document = l_document ).
l_rc = l_renderer->render( ).
Saving the XML document
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = 'c:\temp\flights.xml'
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
<?xml version="1.0"?>
<flights>
<airline code="AA" name="American Airlines">
<flight number="0017">
<from airport="JFK">NEW YORK,US</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>110000</departure>
<arrival>140100</arrival>
<type>Scheduled</type>
</flight>
<flight number="0064">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="JFK">NEW YORK,US</to>
<departure>090000</departure>
<arrival>172100</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="AZ" name="Alitalia">
<flight number="0555">
<from airport="FCO">ROME,IT</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>190000</departure>
<arrival>210500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0788">
<from airport="FCO">ROME,IT</from>
<to airport="TYO">TOKYO,JP</to>
<departure>120000</departure>
<arrival>085500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0789">
<from airport="TYO">TOKYO,JP</from>
<to airport="FCO">ROME,IT</to>
<departure>114500</departure>
<arrival>192500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0790">
<from airport="FCO">ROME,IT</from>
<to airport="KIX">OSAKA,JP</to>
<departure>103500</departure>
<arrival>081000</arrival>
<type>Charter</type>
</flight>
</airline>
<airline code="DL" name="Delta Airlines">
<flight number="1984">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="JFK">NEW YORK,US</to>
<departure>100000</departure>
<arrival>182500</arrival>
<type>Scheduled</type>
</flight>
<flight number="1699">
<from airport="JFK">NEW YORK,US</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>171500</departure>
<arrival>203700</arrival>
<type>Scheduled</type>
</flight>
<flight number="0106">
<from airport="JFK">NEW YORK,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>193500</departure>
<arrival>093000</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="JL" name="Japan Airlines">
<flight number="0407">
<from airport="NRT">TOKYO,JP</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>133000</departure>
<arrival>173500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0408">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="NRT">TOKYO,JP</to>
<departure>202500</departure>
<arrival>154000</arrival>
<type>Charter</type>
</flight>
</airline>
<airline code="LH" name="Lufthansa">
<flight number="2407">
<from airport="TXL">BERLIN,DE</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>071000</departure>
<arrival>081500</arrival>
<type>Scheduled</type>
</flight>
<flight number="2402">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="SXF">BERLIN,DE</to>
<departure>103000</departure>
<arrival>113500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0402">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="JFK">NEW YORK,US</to>
<departure>133000</departure>
<arrival>150500</arrival>
<type>Charter</type>
</flight>
<flight number="0401">
<from airport="JFK">NEW YORK,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>183000</departure>
<arrival>074500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0400">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="JFK">NEW YORK,US</to>
<departure>101000</departure>
<arrival>113400</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="QF" name="Qantas Airways">
<flight number="0005">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>225000</departure>
<arrival>053500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0006">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="SIN">SINGAPORE,SG</to>
<departure>205500</departure>
<arrival>150500</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="SQ" name="Singapore Airlines">
<flight number="0988">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="TYO">TOKYO,JP</to>
<departure>163500</departure>
<arrival>001500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0158">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="JKT">JAKARTA,ID</to>
<departure>152500</departure>
<arrival>160000</arrival>
<type>Scheduled</type>
</flight>
<flight number="0015">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="SIN">SINGAPORE,SG</to>
<departure>160000</departure>
<arrival>024500</arrival>
<type>Scheduled</type>
</flight>
<flight number="0002">
<from airport="SIN">SINGAPORE,SG</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>170000</departure>
<arrival>192500</arrival>
<type>Scheduled</type>
</flight>
</airline>
<airline code="UA" name="United Airlines">
<flight number="0941">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="SFO">SAN FRANCISCO,US</to>
<departure>143000</departure>
<arrival>170600</arrival>
<type>Scheduled</type>
</flight>
<flight number="3504">
<from airport="SFO">SAN FRANCISCO,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>150000</departure>
<arrival>103000</arrival>
<type>Scheduled</type>
</flight>
<flight number="3516">
<from airport="JFK">NEW YORK,US</from>
<to airport="FRA">FRANKFURT,DE</to>
<departure>162000</departure>
<arrival>054500</arrival>
<type>Scheduled</type>
</flight>
<flight number="3517">
<from airport="FRA">FRANKFURT,DE</from>
<to airport="JFK">NEW YORK,US</to>
<departure>104000</departure>
<arrival>125500</arrival>
<type>Scheduled</type>
</flight>
</airline>
</flights>
Regards,
Amit
Reward all helpful replies. -
Problem converting data in XML file to internal table data
Hi all,
I have a requirement. I need to convert an XML file to internal table data and based on that data do Goods Receipt in SAP.
With the help of this blog /people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I am able to convert the XML file to data in SAP. But this blog will display the output on screen as ELELEMNT = nodename VALUE= value of that node.
But I donu2019t want in that way, I want to store all the data in XML file in an internal table so that I can make use of those values and do Goods Recipt in SAP.
Can some one suggest how should I read the data in an internal table.
Here is my code..what changes should I make?
*& Report z_xit_xml_check
REPORT z_xit_xml_check.
TYPE-POOLS: ixml.
TYPES: BEGIN OF t_xml_line,
data(256) TYPE x,
END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_parser TYPE REF TO if_ixml_parser,
l_istream TYPE REF TO if_ixml_istream,
l_document TYPE REF TO if_ixml_document,
l_node TYPE REF TO if_ixml_node,
l_xmldata TYPE string.
DATA: l_elem TYPE REF TO if_ixml_element,
l_root_node TYPE REF TO if_ixml_node,
l_next_node TYPE REF TO if_ixml_node,
l_name TYPE string,
l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line,
l_xml_line TYPE t_xml_line,
l_xml_table_size TYPE i.
DATA: l_filename TYPE string.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'c:\temp\orders_dtd.xml'.
Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
START-OF-SELECTION.
Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
wrap the table containing the file into a stream
l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
size = l_xml_table_size ).
Creating a document
l_document = l_ixml->create_document( ).
Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
istream = l_istream
document = l_document ).
Validate a document
IF pa_val EQ 'X'.
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
ENDIF.
Parse the stream
IF l_parser->parse( ) NE 0.
IF l_parser->num_errors( ) NE 0.
DATA: parseerror TYPE REF TO if_ixml_parse_error,
str TYPE string,
i TYPE i,
count TYPE i,
index TYPE i.
count = l_parser->num_errors( ).
WRITE: count, ' parse errors have occured:'.
index = 0.
WHILE index < count.
parseerror = l_parser->get_error( index = index ).
i = parseerror->get_line( ).
WRITE: 'line: ', i.
i = parseerror->get_column( ).
WRITE: 'column: ', i.
str = parseerror->get_reason( ).
WRITE: str.
index = index + 1.
ENDWHILE.
ENDIF.
ENDIF.
Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
PERFORM process_dom USING l_document.
ENDIF.
*& Form get_xml_table
FORM get_xml_table CHANGING l_xml_table_size TYPE i
l_xml_table TYPE STANDARD TABLE.
Local variable declaration
DATA: l_len TYPE i,
l_len2 TYPE i,
l_tab TYPE tsfixml,
l_content TYPE string,
l_str1 TYPE string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab TYPE TABLE OF string.
l_filename = pa_file.
upload a file from the client's workstation
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = l_filename
filetype = 'BIN'
IMPORTING
filelength = l_xml_table_size
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Writing the XML document to the screen
CLEAR l_str1.
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement = space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
WRITE: /.
WRITE: /' XML File'.
WRITE: /.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
l_str1 WITH space.
WRITE: / l_str1.
ENDLOOP.
WRITE: /.
ENDFORM. "get_xml_table
*& Form process_dom
FORM process_dom USING document TYPE REF TO if_ixml_document.
DATA: node TYPE REF TO if_ixml_node,
iterator TYPE REF TO if_ixml_node_iterator,
nodemap TYPE REF TO if_ixml_named_node_map,
attr TYPE REF TO if_ixml_node,
name TYPE string,
prefix TYPE string,
value TYPE string,
indent TYPE i,
count TYPE i,
index TYPE i.
node ?= document.
CHECK NOT node IS INITIAL.
ULINE.
WRITE: /.
WRITE: /' DOM-TREE'.
WRITE: /.
IF node IS INITIAL. EXIT. ENDIF.
create a node iterator
iterator = node->create_iterator( ).
get current node
node = iterator->get_next( ).
loop over all nodes
WHILE NOT node IS INITIAL.
indent = node->get_height( ) * 2.
indent = indent + 20.
CASE node->get_type( ).
WHEN if_ixml_node=>co_node_element.
element node
name = node->get_name( ).
nodemap = node->get_attributes( ).
WRITE: / 'ELEMENT :'.
WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
IF NOT nodemap IS INITIAL.
attributes
count = nodemap->get_length( ).
DO count TIMES.
index = sy-index - 1.
attr = nodemap->get_item( index ).
name = attr->get_name( ).
prefix = attr->get_namespace_prefix( ).
value = attr->get_value( ).
WRITE: / 'ATTRIBUTE:'.
WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
value COLOR COL_TOTAL INVERSE.
ENDDO.
ENDIF.
WHEN if_ixml_node=>co_node_text OR
if_ixml_node=>co_node_cdata_section.
text node
value = node->get_value( ).
WRITE: / 'VALUE :'.
WRITE: AT indent value COLOR COL_GROUP INVERSE.
ENDCASE.
advance to next node
node = iterator->get_next( ).
ENDWHILE.
ENDFORM. "process_dom
Any help would be highly apperciated.
regards,
Jessica SamPavel Vera,
With your example i tries doing the following .....
I tried to convert the data of XML file to internal table data. I am collecting the data in internal table to do goos recipt with that data.
Please find my XML file, ABAP pgm and XSLT pgm . I donu2019t know what I am missing I am not getting any output. I donu2019t know what is wrong please help me with this
Below is my XML file, My code and XSLT Program. In the below XML file I need to collect Vendor Number, Order Number, and Date tags which occur only once for one XML file.
I also need to collect the following tags from <Shipmentdetail>
<Shipmentdetail> has following child nodes and I need to collect them
TrackingNumber
Freight
Weight
ShipmentDate
ShipmentMethod
Need to collect to collect the following tags from <ProductInformation>
<ProductInformation> has following child nodes and I need to collect them
LineNumber
SKUNumber
OrderedQuantity
ShippedQuantity
UOM
The <Shipmentdetail> and <ProductInformation> are child nodes of <OrderShipment>
The <Shipmentdetail> occurs only ones but the <ProductInformation> can occur once or many times and will be dynamic and differs depening on the input file.
My XML file is as follows
<?xml version="1.0" encoding="iso-8859-1" ?>
- <ShipmentHeader>
<AccountID />
- <OrderShipment>
<VendorNumber>1000</VendorNumber>
<OrderNumber>P00009238</OrderNumber>
<OrderType>Stock</OrderType>
<Company />
<Division />
<Department />
<Date>20061120</Date>
<CartonCount>2</CartonCount>
<ShipAllProducts>No</ShipAllProducts>
- <ShipmentDetail>
<TrackingNumber>1ZR3W891PG47477811</TrackingNumber>
<Freight>000000010000</Freight>
<ShipmentDate>20061120</ShipmentDate>
<ShipmentMethod>UPS1PS</ShipmentMethod>
</ShipmentDetail>
- <ProductInformation>
<LineNumber>000000001</LineNumber>
<SKUNumber>110FR</SKUNumber>
<AdvSKUNumber>003 4518</AdvSKUNumber>
<SKUID />
<OrderedQuantity>00000001000000</OrderedQuantity>
<ShippedQuantity>00000001000000</ShippedQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</ProductInformation>
- <ProductInformation>
<LineNumber>000000002</LineNumber>
<SKUNumber>938EN</SKUNumber>
<AdvSKUNumber>001 7294</AdvSKUNumber>
<SKUID />
<OrderedQuantity>00000000450000</OrderedQuantity>
<ShippedQuantity>00000000450000</ShippedQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</ProductInformation>
- <CaseInformation>
<LineNumber>000000001</LineNumber>
<SKUNumber>110FR</SKUNumber>
<AdvSKUNumber>003 4518</AdvSKUNumber>
<SKUID />
<SSCCNumber>00000001668000002487</SSCCNumber>
<CaseQuantity>00000001000000</CaseQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</CaseInformation>
<CaseInformation>
<LineNumber>000000001</LineNumber>
<SKUNumber>110FR</SKUNumber>
<AdvSKUNumber>003 4518</AdvSKUNumber>
<SKUID />
<SSCCNumber>00000001668000002487</SSCCNumber>
<CaseQuantity>00000001000000</CaseQuantity>
<UOM>EA</UOM>
<Factor>1</Factor>
</CaseInformation>
- </OrderShipment>
</ShipmentHeader>
My Program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\temp\test.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ts_shipment,
VendorNumber(10) TYPE n,
OrderNumber(20) TYPE n,
OrderType(8) TYPE c,
Date(8) TYPE c,
END OF ts_shipment.
TYPES: BEGIN OF ts_shipmentdetail,
TrackingNumber(30) TYPE n,
Freight(12) TYPE n,
Weight(14) TYPE n,
ShipmentDate(8) TYPE c,
ShipmentMethod(8) TYPE c,
END OF ts_shipmentdetail.
TYPES: BEGIN OF ts_productinformation,
LineNumber(9) TYPE n,
SKUNumber(20) TYPE c,
OrderedQuantity(14) TYPE n,
ShippedQuantity(14) TYPE n,
UOM(4) TYPE c,
END OF ts_productinformation.
* Table for the XML content
DATA: gt_itab TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_shipment TYPE STANDARD TABLE OF ts_shipment,
gs_shipment TYPE ts_shipment.
DATA: gt_shipmentdetail TYPE STANDARD TABLE OF ts_shipmentdetail,
gs_shipmentdetail TYPE ts_shipmentdetail.
DATA: gt_productinformation TYPE STANDARD TABLE OF ts_productinformation,
gs_productinformation TYPE ts_productinformation.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex TYPE REF TO cx_root,
gs_var_text TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = gs_file
CHANGING
data_tab = gt_itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPMENT".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPMENT'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPDET".
GET REFERENCE OF gt_shipmentdetail INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPDET'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPRODDET".
GET REFERENCE OF gt_productinformation INTO gs_result_xml-value.
gs_result_xml-name = 'IPRODDET'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
CALL TRANSFORMATION z_xml_to_abap3
SOURCE XML gt_itab
RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
gs_var_text = gs_rif_ex->get_text( ).
MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Writing the data from file for gt_shipment
*Collecting the Shipping Data from the XML file to internal table gt_shipment
*and writing the data to the screen
LOOP AT gt_shipment INTO gs_shipment.
WRITE: / 'VendorNumber:', gs_shipment-VendorNumber.
WRITE: / 'OrderNumber :', gs_shipment-OrderNumber.
WRITE: / 'OrderType :', gs_shipment-OrderType.
WRITE: / 'Date :', gs_shipment-Date.
WRITE : /.
ENDLOOP. "gt_shipment.
LOOP AT gt_shipmentdetail INTO gs_shipmentdetail.
WRITE: / 'TrackingNumber:', gs_shipmentdetail-TrackingNumber.
WRITE: / 'Freight :', gs_shipmentdetail-Freight.
WRITE: / 'Weight :', gs_shipmentdetail-Weight.
WRITE: / 'ShipmentDate :', gs_shipmentdetail-ShipmentDate.
* WRITE: / 'ShipmentMethod :' gs_shipmentdetail-ShipmentMethod
WRITE : /.
ENDLOOP. "gt_shipmentdetail.
LOOP AT gt_productinformation INTO gs_productinformation.
WRITE: / 'LineNumber:', gs_productinformation-LineNumber.
WRITE: / 'SKUNumber :', gs_productinformation-SKUNumber.
WRITE: / 'OrderedQuantity :', gs_productinformation-OrderedQuantity.
WRITE: / 'ShippedQuantity :', gs_productinformation-ShippedQuantity.
WRITE: / 'UOM :', gs_productinformation-UOM.
WRITE : /.
ENDLOOP. "gt_productinformation.
XSLT Program
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ISHIPMENT>
<xsl:apply-templates select="//OrderShipment"/>
</ISHIPMENT>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="OrderShipment">
<item>
<VENDORNUMBER>
<xsl:value-of select="VendorNumber"/>
</VENDORNUMBER>
<ORDERNUMBER>
<xsl:value-of select="OrderNumber"/>
</ORDERNUMBER>
<ORDERTYPE>
<xsl:value-of select="OrderType"/>
</ORDERTYPE>
<DATE>
<xsl:value-of select="Date"/>
</DATE>
</item>
</xsl:template>
<xsl:template match="/">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<ISHIPDET>
<xsl:apply-templates select="//OrderShipment/ShipmentDetail"/>
</ISHIPDET>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="ShipmentDetail">
<item>
<TRACKINGNUMBER>
<xsl:value-of select="TrackingNumber"/>
</TRACKINGNUMBER>
<FREIGHT>
<xsl:value-of select="Freight"/>
</FREIGHT>
<SHIPMENTDATE>
<xsl:value-of select="ShipmentDate"/>
</SHIPMENTDATE>
<SHIPMENTMETHOD>
<xsl:value-of select="ShipmentMethod"/>
</SHIPMENTMETHOD>
</item>
</xsl:template>
</xsl:transform> .
Any help is highly appreciated. If anyone encountered this situation before please let me know where i am going wrong in my XSLT transformation.
Any Help will be highly apppreciated. Thanks in advance
Regards,
Jessica Sam -
Sending internal table data to application server as an XML file
Hi All,
I am trying to send the internal table data to application server which should be stored in XML format.
I am using the following code:
DATA:
result TYPE xstring.
CALL TRANSFORMATION id
SOURCE tab = p_output-xsfdata
RESULT XML result.
OPEN DATASET l_xml_full_path FOR OUTPUT IN BINARY MODE.
TRANSFER result TO l_xml_full_path.
CLOSE DATASET l_xml_full_path.
And the content in the internal table is :
3C3F786D6C2076657273696F6E3D22312E30223F3E3C736620786D6C6E733D2275726E3A736
73796D206E616D653D22534653592D44415445223E30362F31302F323030393C2F73796D3E2
50617961626C653C6E65772D6C696E652F3E50617274206F6620746865204E616D653C6E657
.......and so on
With this a file is getting created on the application server, but the data is not correct. I am getting the data something like:
<?xml version="1.0" encoding="utf-8"?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0"><asx:values><TAB><item>
PD94bWwgdmVyc2lvbj0iMS4wIj8+PHNmIHhtbG5zPSJ1cm46c2FwLWNv
MDA6eHNmIj48c21hcnR4c2Y+PGhlYWRlcj48Z2VuZXJhbD48dmVyc2lvbj4xLjE0LjI8L3ZlcnNp
b24PGZvcm0WkJMX1NESU5WX0xfMzwvZm9ybT48bGFuZ3VhZ2U+RU48L2xhbmd1YWdlPjxkZXZp
Y2UUFJJTlRFUjwvZGV2aWNlPjxvdXRwdXQtZGV2aWNlPlNYU0Y8L291dHB1dC1kZXZpY2UPC9n
ZW5lcmFsPjxwYWdlIG5hbWU9IkZJUlNUIiBpZD0iMDAxIi8PC9oZWFkZXIPGRhdGEgeG1sOnNw
YWNlPSJwcmVzZXJ2ZSIgc3R5bGU9Ii9TTUIxMS9CTF9TRiI+PGdyYXBoaWNzIG5hbWU9IkNPTUxP
R08iIG9iam5hbWU9Ii9TTUI0MC9MRUFGIiBvYmplY3Q9IkdSQVBISUNTIiBpZD0iQk1BUCIgdHlw
ZT0iQkNPTCIgcGFnZT0iRklSU1QiIHBhZ2UtaWQ9IjAwMSIgcmVzb2x1dGlvbj0iMDEwMCIvPjx3
aW5kb3cgbmFtZT0iU0VOREVSIiBwYWdlPSJGSVJTVCIgcGFnZS1pZD0iMDAxIj48dGV4dCBuYW1l
PSJDT01BRERSIiBzdHlsZT0iL1NNQjExL0JMX1NGIiBvYmpuYW1lPSIvU01CMTEvQkxfU0VOREVS
IiBsYW5nPSJFTiIPHAgbmFtZT0iWlMiPkJhc2VsaW5lIENvbXBhbnk8L3APHAgbmFtZT0iWlMi
PjM0NzUgRGVlciBDcmVlazx0YWIvPlBob25lOjx0YWIvPisxICg2NTApIDg0OS00MDAwPC9wPjxw
IG5hbWU9IlpTIj5QYWxvIEFsdG8sIENBIDk0MzA0PHRhYi8+RmF4Ojx0YWIvPisxICg2NTApIDg0
OS00MjAwPC9wPjxwIG5hbWU9IlpTIj5VU0E8dGFiLz5JbnRlcm5ldDo8dGFiLz5odHRwOi8vd3d3
LnNhcC5jb208L3A+PC90ZXh0Pjwvd2luZG93Pjx3aW5kb3cgbmFtZT0iUEFHRSIgcGFnZT0iRklS
U1QiIHBhZ2UtaWQ9IjAwMSI+PHRleHQgbmFtZT0iUEFHRU5VTUJFUiIgc3R5bGU9Ii9TTUIxMS9C
TF9TRiIgbGFuZz0iRU4iPjxwIG5hbWU9IlROIj5QYWdlIDxzeW0gbmFtZT0iU0ZTWS1QQUdFIj4x
PC9zeW0IG9mIDxzeW0gbmFtZT0iU0ZTWS1KT0JQQUdFUyIvPjwvcD48cCBuYW1lPSJUTiIPA==</item>
<item>c3ltIG5hbWU9IlNGU1ktREFURSI+MDYvMTAvMjAwOTwvc3ltPiA8c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 anyone tell me the reason why am I getting the data in this way?
Thanks in advance,
Swapna.
Edited by: NagaSwapna Thota on Jun 10, 2009 5:44 PMHI,
Use this FM SAP_CONVERT_TO_XML_FORMAT to convert the data to XML format and then upload the convert data from the internal table to Application server. -
How to display a table data on Screen having a Table control
Hi ,
I am new to ABAP.I would like to display a table data (Eg: ZDemo) on a screen at run time.I have defined a Table control in screen. Now I want to populate data from ZDemo to table control.How can I do that?Please help moving forward in this regard.Hi Gayatri,
After creating table control do the following steps.
1. In the flow logic section write the following code:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
LOOP AT I_LIKP WITH CONTROL LIKP_DATA CURSOR LIKP_DATA-CURRENT_LINE.
MODULE ASSIGN_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0200.
LOOP AT I_LIKP.
ENDLOOP.
I_LIKP is the internal table which is used to display table data in the table control.
2. In Process Before Output, in the module STATUS_0200 write the following code:
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
In Process After Input, in the module USER_COMMAND_0200 write the following code:
CASE SY-UCOMM.
WHEN 'LIPS'.
READ TABLE I_LIKP WITH KEY MARK = 'X'.
SELECT VBELN
POSNR
WERKS
LGORT
FROM LIPS
INTO TABLE I_LIPS
WHERE VBELN = I_LIKP-VBELN.
IF SY-SUBRC = 0.
CALL SCREEN 200.
ENDIF.
WHEN 'BACK'.
SET SCREEN 200.
ENDCASE.
In Process Before Output and in the module ASSIGN_DATA which is there inside the loop write the following code:
MOVE-CORRESPONDING I_LIKP TO LIKP.
So, Totally your flow logic code should be like this.
TABLES: LIKP, LIPS.
DATA: BEGIN OF I_LIKP OCCURS 0,
VBELN LIKE LIKP-VBELN,
ERNAM LIKE LIKP-ERNAM,
ERZET LIKE LIKP-ERZET,
ERDAT LIKE LIKP-ERDAT,
MARK TYPE C VALUE 'X',
END OF I_LIKP,
BEGIN OF I_LIPS OCCURS 0,
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
WERKS LIKE LIPS-WERKS,
LGORT LIKE LIPS-LGORT,
END OF I_LIPS,
FILL TYPE I.
CONTROLS: LIKP_DATA TYPE TABLEVIEW USING SCREEN 200,
LIPS_DATA TYPE TABLEVIEW USING SCREEN 300.
DATA: COLS LIKE LINE OF LIKP_DATA-COLS.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'LIKP'.
SELECT VBELN
ERNAM
ERZET
ERDAT
FROM LIKP
INTO TABLE I_LIKP
WHERE VBELN = LIKP-VBELN.
IF I_LIKP[] IS INITIAL.
CALL SCREEN 200.
ENDIF.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module assign_data OUTPUT
text
MODULE ASSIGN_DATA OUTPUT.
MOVE-CORRESPONDING I_LIKP TO LIKP.
ENDMODULE. " assign_data OUTPUT
*& Module STATUS_0200 OUTPUT
text
MODULE STATUS_0200 OUTPUT.
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_COMMAND_0200 INPUT
text
MODULE USER_COMMAND_0200 INPUT.
CASE SY-UCOMM.
WHEN 'LIPS'.
READ TABLE I_LIKP WITH KEY MARK = 'X'.
SELECT VBELN
POSNR
WERKS
LGORT
FROM LIPS
INTO TABLE I_LIPS
WHERE VBELN = I_LIKP-VBELN.
IF SY-SUBRC = 0.
CALL SCREEN 200.
ENDIF.
WHEN 'BACK'.
SET SCREEN 200.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
Save and Activate the program along with the screen in which you have included table control.
Hope this will help you.
Regards
Haritha.
Maybe you are looking for
-
Printing data sent to printer one page at a time
Before, when I printed on my Brother MFC-7840W printer, the data was sent to the printer instantaeously. But now, on my new MBA with Mavericks, when I print something, the printer queue says 'Printing - Sending data to printer" and sends the data one
-
I can't fathom the reasoning behind ID CS5 tables. Can you help?
I can make ID CS5 tables work, but I don't understand how they work. I should mention that I'm a heavy FrameMaker user, so I'm sure I've got some faulty preconceptions. In FrameMaker, I'm accustomed to using table styles to automate table formatting.
-
Our small family network consists of three Apple machines: 2003 iMac G4 1.25 GHz MacOS 10.4.11 & "Classic mode" 9.2 (used as a file server and to run old software) 2012 iMac 2.9 GHz Core i5 MacOS 10.9 2013 MacBook Pro 13-inch w/ Retina Display MacO
-
hi ! gurus this is my problem i have a field in this format : 20021201 (date) but a need in this format 01/dec/2002 and... another field in this format 2314224 ( hour) but ai need in this format 23:42:24 (sometimes the format is 45621) but in fact it
-
Remove unnecessary transport requests which are 7 days old
Hi All, I would like to delete all the un-necessary transport requests which are displayed in STMS which are more than 7 days old. But, the import log should be available whenever i need to verify. Is there any script which can do this? Thanks Vijay