Table Designer third rule thick is not working for me.  Any suggestions?

I am trying to turn the third rule in a four row table thick. I go into Table Designer and select Every 3rd Thick.  The others are all none.  The table is not responding to the command to make the third rule thick as I need it to be.  Does anyone have any suggestions?  Thank you.

To remove table format overrides, you need to go to Table > Format > Custom Ruling and Shading, and set as follows:
For more info, see page 171 of my book.
-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 11

Similar Messages

  • I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up.  Clicking on 'repair catalog' does not work either.  Any suggestions?

    I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up.  Clicking on 'repair catalog' does not work either.  Any suggestions?

    I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again.  But that is a different issue...
    The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing...  But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
    I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
    I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
    And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
    Jeff

  • Similar table design in the same page not working as expected.

    Hi all! 
    Appreciate if someone can help me on my problem.
    I have multiple subforms in my XDP template and 2 of them almost have exactly the same content/design/logic (except for additional columns to be displayed in other subform).  And only one of them will be displayed in any given time through the use of below script.
    var tempRateNameInsFg = Page1.sfAsegurado.sfData.grpHiddenFlds.rateNamedInsFg.rawValue;
    if (tempRateNameInsFg == "Y") {
        dpom.Page1.sfAseguradosNO.presence = "hidden";
    BUT the 2nd subform is not filling-up data as the first one did successfully and I don't know why.  The weird part is when I delete either one of subform then the remaining one works fine. 
    Is two exactly the same data binding is not allowed?  Please help....

    All, appreciated your quick reply to my problem.
    Anyway, my design doesn't even use SOM except for the display/hide of either one of the tables.  All my coding is via the 'Object' screen specifically in 'Binding' tab'.
    In the table under 'Body' row below is my actual data binding rules.
    $.policyCert.policyCertRider.namedInsured[*]
    and each column the data-binding is like '$.GivenName' on 1st comlum, '$.FamilyName' in the 2nd column and so on and so forth.  No javascript at all.  
    Take note that both tables of the each subform have the same setup BUT only one the first subform works fine.
    Just did morning, for the sake of investigation I created another XML node like 'policyCert.policyCertRider.namedInsuredTEMP' and change the data-binding of the 2nd subform to:
    $.policyCert.policyCertRider.namedInsuredTEMP[*]
    And it works fine!
    Appreciate help.

  • 5.1 Surround sound not working in iTunes any suggestions?

    My 5.1 surround sound will not work with iTunes it only plays out of the front left and front right speaker. In other programs it runs fine any suggestions on how to make it work in iTunes?

    All my players (WMP, Realplayer, AvRack) play 5.1 surround except iTunes.
    I've tried the Quicktime Pro adjustments as posted. No luck.
    Does Apple post here?
    From all the surround ?'s, it seems the player won't do surround anymore?
    thanks,
    Scot - MarginCall

  • The ringer on my Iphone is not working...any suggestions

    the ringer on my phone is not working.  I've reset the phone, but it still will not ring.  any other suggestions?

    Is the silent switch on the side of the iphone on?

  • My Safari browser is not working properly. Any suggestions?

    When I access my online banking site. I can no longer view and pay bills. Each time I click on that option, the browser goes right back to the opening login screen. I have tried a different account and the same thing occurs. This started after I clicked on an option to remove the enhanced login (quicker access). I can use a different browser like Chrome and it works fine. Something has flipped a switch in my Safari browser. I tried reseting, deleting all cookies, and emptying the cache to no avail. Any suggestions?

    Removed all website data. Didn't make a difference.
    I am having the same problem on my Mac Pro. My old G4 tower running 10.5.8 has no issue.
    Here is the error being generated:
    3Unsafe JavaScript attempt to access frame with URL https://bankname.billdomain.com/BankName/SignOn from frame with URL https://www.bankname.com/olb/billpay/billPaymentsSso. Domains, protocols and ports must match.
    (I have inserted the generic BANKNAME for the real bank name)
    I'm no rocket surgeon but it looks to me like the bank code weenies are writing some crappy code.
    I have had the same results with Chrome, Firefox and SAfari

  • Iphone 3g mail not working for me - any help appreciated

    I have both, POP and gmail accounts set up on the iphone. On my desktop, I have mail set to leave a copy of the messages on the server for one week.

    on the iphone - the mail accounts work, but are not receiving the messages to the phone. All mail option is set to PUSH. Can anyone help me troubleshoot why I'm not receiving, but getting on the desktop? My first generation iphone worked beautifully, this one not so much : (

  • Inserting transitions not working... any suggestions?

    FCPx will not let me insert transtions between clips.. is this a known bug?
    How can I get support for this?

    So you confimr what i think, the only "useful" way is to split the cut and use the handles!
    Ok, Apple want to have a new editing filosofy, but anyway  have to mean that you can do all the things you have done until now with FCP7!
    Editing a stupid interview with audio transitions is so difficult that i preseume editing a 40 min documentary will be a very very hard work!!!
    I dont understand the Apple filosofy, is obvious that quite all the editors will use Media Composer 5 in the future!!!
    The only way for FCPX to survive in the pro world is a new reliese very very soon!!!
    Also because an home editor use iMovie and also 250€ are too much for him, a professional editor cant use FCPX really now! And not only why there isn't the multicam or the tape workflow, but because also the basic editing need a lot of clic, more than before, too for us!!!

  • Itouch is locked. screen unresponsive. Restore did not work (x4).  Any suggestions?

    restored over 4 times.  nothing seems to work.  itouch screen locked up. voice over command is on. device is ready to configure, but i can not use screen.

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store. If defective and not abused Apple will exchange it at no cost.
    Apple Retail Store - Genius Bar

  • Java applets won't load, have latest version of java installed, have removed all old versions from the hard drive, java console not working in firefox, any suggestions please ?

    java applets will not load,
    i have run the java test page & i have the latest version installed.
    have removed all old versions of java from my hard drive & restarted the computer.
    i have checked that java is enabled in the plug-ins and it is with version se 6 u22, also something called java development toolkit 6.0.220.4 np runtime script plug-in library for java (tm) deploy.
    if i click on java console in tolls nothing happens

    Hi,
    You might want to look in your control panel for 'Java' icon. It should give you an option to enable java plugin into your browser. Let me know if you still face the issue.
    Thanks!

  • Check boxes not working ... any suggestions

    I have a user that is having problems checking any check boxes within CRM. Their workstation was recently upgraded to Windows 7 with IE8. does anybody know of any setting which might prevent the clicking on the checkbox to work ? I can log in with their id and it works fine from an XP and IE7 machine.

    One additional setting that I found that needed to be checked in the Internet Options is the "Display Mixed Content" option. We have some embedded reports and web pages within CRMOD and in order to suppress a warning box, we needed to changed the setting from "Prompt" to "Enable". If you're embedding other content within your instance, that might be of use to you.

  • My Safari will not shut down. The box for this in FILE is grayed out and command Q does not work either. Any suggestion will be greatly appreciated.

    I have all the updated software. This started happening about 2 days ago. I stumped and concerned.
    Thank you

    You can make an unresponsive application quit by using "Apple > Force Quit > Safari > Quit". You should consider updating your OS to:
    Mac OS X 10.6.8 Update Combo v1.1
    It's more stable.

  • Form Designed in LiveCycle will not work for End User

    Please Help!
    I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms.  After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help.  So here's the deal:
    I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms.  The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera.  The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken.  The second subform is basically an image field and text fields used as photo captions/photo compilation pages.  When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)).  Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells.  I was able to find a script to correctly populate those fields for each instance of the table.  Wish I had the form here, but it's at work at the moment.
    My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview.  I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X).  I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly.  However, once they save it, it gets all jumbled and they can't even print it.  We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work.  I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
    Anyone have any thoughts on my long explanation??  Please HELLLLPPPP!

    The error(s) occur when trying to save the document.  I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:"  ---> Then click the "Submit" cmd button.  That should expand the table.  Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table.  Then the user will populate each cell of the table on page 1 with data.  The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1. 
    The problem is in the distributing of the form to the user so they can save the form after populating the data.  I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos).  However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document.  Then re-opened the copy in Acrobat Pro X.  The new copy:
    -had 5 additional rows added to Page 1
    -Duplicates of some of the fields
    -Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
    Again, this all works fine in the LiveCycle Preview but not anywhere else.  I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons.  I also do not want to distribute this form to end users and then collect the data back from them.  I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

  • "Include Header Row in Subsequent Pages" is not working for table

    Hi,
    I'm using version 8.1.2.3337.1.509884.
    The pagnation feature "Include Header Row in Subsequent Pages" is not working for any table in my design. ( the check-box can not be checked no matter how many times I clicking it)
    I put such table already in a flow bodypage.
    Any similar issue reported?
    Any suggestions?
    Thanks.
    -Vicky

    Hi Raghu,
    Appologies that I uploaded a wrong version of xdp file yesterday.
    Here is the correct one.
    https://acrobat.com/#d=jr0XffvBZWXd0cVhL0OQ3A
    I totally understand that I have to check the checkbox "Include Header Row in Subsequent Pages".
    My problem is that, although I can see that checkbox, and it's not grey-out, I can not tick it. See below screenshot, with the red-cycle mark.
    You can try with above file.
    Just wondering why such weird behavior happened.
    -Vicky

  • Select All in a table does not work for Drag and Drop

    Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
    I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
    I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
    I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
    Does anyone know how to get Select All to work for a Drag Source?
    Thanks.
    -Ed

    Frank-
    OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
    SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
    Thanks again for the reply.
    -Ed

Maybe you are looking for