Table display link between PSA Table name and corresponding Datasource

Hi Colleagues,
Is there a table from which one we can see the datasource corresponding to the PSA table name ?
Thanks

RSDSSEG
you still have to give the version number... which can be 000 .. 001 or something

Similar Messages

Link between SD invoice item and corresponding accounting document item

Hi,
I have a problem regarding the link between the items of an SD invoice ( or
credit note ) and those of the corresponding accounting document. There's a
custom report which extracts information about each credit/debit note
produced within a certain period. This program has recently failed due to a
particular case: a credit note was generated starting by two note requests;
in other terms, cardinality: 1:N exists between the credit note and the
request document. Currently, the program generates duplicated records in
this case, because of the following schema:
-> main loop on VBAK data ( request document header data )
-> inner loop on BSEG data ( accounting document items );
our current access criteria in reading tb_bseg is only:
... where tb_bseg-belnr = tb_vbrk-vbeln.
Providing that tb_vbrk-vbeln doesn't differ and that both tb_vbak and tb_bseg
contain two records ( the two requests the first and the two accounting
document items the second ), the program fails as follows:
° first request -> two lines
° second request -> two lines.
Is there any way to link each invoice item with the corresponding credit
note item?
Thanks in advance to all of you.
Adrian.

Hi,
I have a problem regarding the link between the items of an SD invoice ( or
credit note ) and those of the corresponding accounting document. There's a
custom report which extracts information about each credit/debit note
produced within a certain period. This program has recently failed due to a
particular case: a credit note was generated starting by two note requests;
in other terms, cardinality: 1:N exists between the credit note and the
request document. Currently, the program generates duplicated records in
this case, because of the following schema:
-> main loop on VBAK data ( request document header data )
-> inner loop on BSEG data ( accounting document items );
our current access criteria in reading tb_bseg is only:
... where tb_bseg-belnr = tb_vbrk-vbeln.
Providing that tb_vbrk-vbeln doesn't differ and that both tb_vbak and tb_bseg
contain two records ( the two requests the first and the two accounting
document items the second ), the program fails as follows:
° first request -> two lines
° second request -> two lines.
Is there any way to link each invoice item with the corresponding credit
note item?
Thanks in advance to all of you.
Adrian.

Table for link between conttract account no and business partner

Hi,
can anyone let me know abt any table that defines relation between contract account and business partner.
so dat for a contract account no i can get 1 business partner .
Thnx,

Hi
Use the table
<b>VVKKFOPT and VVKKFOP</b>
both business partner and Contract account fields are there.
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

How to get the link between mara, ausp, cawn and cawnt tables

hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soni

Hi,
Sample report using the linkage between tables;
report batch_char no standard page heading
                          line-size 132
                          line-count 58(1)
                          message-id mm.
       Report by Batch Characteristic                                *
Description          : Report by Batch Characteristic                *
Declaration for Tables
tables: mara,    " Material Master
        mard,    " Storage Location Data for Material
        t001w,   " Plants/Branches
        t001l,   " Storage Locations
        cabn,    " Characteristics
        inob.    " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023',     " Class Type
            c_obtab like inob-obtab value 'MCH1',    " Database Table
            c_flag type c          value 'X',       " Flag
            c_c23   type i          value '23',      " Ratio
Constants for Ratio Categories
            c_13    type p decimals 2 value '13.00', " For Ratio 13
            c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
            c_15    type p decimals 2 value '15.00', " For Ratio 15
            c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
            c_17    type p decimals 2 value '17.00', " For Ratio 17
            c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
            c_19    type p decimals 2 value '19.00', " For Ratio 19
            c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
            c_21    type p decimals 2 value '21.00', " For Ratio 21
            c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
            c_23    type p decimals 2 value '23.00', " For Ratio 23
            c_g23(4) type c value '>=23',            " For Ratio >=23
            c_ratio(5) value 'RATIO',                  " For Ratio
Constants for Storing Selected item field information
            c_cursor1(15) value 'I_OUTPUT1-MEINS',   " For Selected Base
                                                     " Unit of Measure
            c_cursor2(15) value 'I_OUTPUT1-MATNR',   " For Selected Base
                                                     " Material Number
            c_cursor3(15) value 'I_OUTPUT1-MAKTX',   " For Selected Base
                                                     " Material Des.
            c_cursor4(15) value 'I_OUTPUT1-CLABS',   "For Selected Base
                                                     " Stock Value
            c_cursor5(15) value 'I_OUTPUT1-ATFLV',   " For Selected Base
                                                    " Char.Value (Ratio)
            c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c,                            " Flag
       g_clabs1(16) type c,                       " Quantity
       g_clabs(18) type c,                       " Quantity
       g_cursor(15) type c,                       " Cursor field name
       g_matnr     type mara-matnr,               " Material Number
       g_werks     type mchb-werks,               " Plant
       g_atinn(30) type c.                        " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
         matnr like mchb-matnr,      " Material Number
         werks like mchb-werks,      " Plant
         lgort like mchb-lgort,      " Storage Location
         charg like mchb-charg,      " Batch Number
         clabs like mchb-clabs,      " Stock Value
         meins like mara-meins,      " Unit of measure
         atflo like ausp-atflv,      " Char.Value (Ratio)
         atflv like ausp-atflv,      " Char.Value (Ratio)
       end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
         werks like mchb-werks,      " Plant
         matnr like mchb-matnr,      " Material Number
         lgort like mchb-lgort,      " Storage Location
         charg like mchb-charg,      " Batch Number
         atinn like ausp-atinn,      " Char.Value
         clabs like mchb-clabs,      " Stock Value
         atflo like ausp-atflv,      " Char.Value (Ratio)
         atflv like ausp-atflv,      " Char.Value (Ratio)
       end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
         werks like t001w-werks,     " Plant
         name1 like t001w-name1,     " Name
       end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
         matnr like makt-matnr,      " Material
         maktx like makt-maktx,     " Description
       end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
         objek like ausp-objek,      " Object No
         atinn like cabn-atinn,      " Characteric value
         atflv like ausp-atflv,      " Characteristic Value
       end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
         atinn like cabn-atinn,      " Characteric value
         werks like mchb-werks,      " Plant
         matnr like mchb-matnr,      " Material Number
         atnam like cabn-atnam,      " Characteristic
         atflv like ausp-atflv,      " Char.Value (Ratio)
         name1 like t001w-name1,     " Plant Description
         maktx like makt-maktx,      " Material Description
         clabs like mchb-clabs,      " Stock Value
         meins like mara-meins,      " Base Unit of Measure
       end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
         atinn like cabn-atinn,      " Characteric value
         werks like mchb-werks,      " Plant
         matnr like mchb-matnr,      " Material Number
         atnam like cabn-atnam,      " Characteristic
         atflv(32) type c,           " Char.Value (Ratio)
         name1 like t001w-name1,     " Plant Description
         maktx like makt-maktx,      " Material Description
         clabs like mchb-clabs,      " Stock Value
         meins like mara-meins,      " Base Unit of Measure
       end of i_output1.
       Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
                s_lgort for t001l-lgort,             " Stor.Location
                s_matnr for mara-matnr obligatory, " Material No
                s_atinn for cabn-atinn.              " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
    perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
    perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
      Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
    select werks
      into t001w-werks
      from t001w
      up to 1 rows
      where werks in s_werks.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Plant'(002).
    endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
    select matnr
      into mara-matnr
      from mara
      up to 1 rows
      where matnr in s_matnr.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Material'(003).
    endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
    select lgort
      into t001l-lgort
      from t001l
      up to 1 rows
      where lgort in s_lgort.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Storage Location'(004).
    endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
    select atinn
      into cabn-atinn
      from cabn
      up to 1 rows
      where atinn in s_atinn.
    endselect.
    if sy-subrc <> 0.
      message e899 with 'Enter Valid Characteristic Value'(005).
    endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
    into (mard-matnr, mard-werks, mard-lgort)
    from mard
    up to 1 rows
    where matnr in s_matnr and
          werks in s_werks and
          lgort in s_lgort.
endselect.
if sy-subrc <> 0.
    message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform.                          "validate_screen
*&      Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
       exporting
            repid    = l_repid
            heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18)   'Material Number'(008) centered,
          20 sy-vline, 21(40) 'Material Description'(011) centered,
          61 sy-vline, 62(22) 'Ratio'(009) centered,
          84 sy-vline, 85(18) 'Quantity'(010) centered,
         103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
         125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform.                    "get_headings
*&      Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr       " Material Number
         b~werks       " Plant
         b~lgort       " Storage Location
         b~charg       " Batch Number
         b~clabs       " Stock Value
         a~meins       " Base Unit of Measure
      into table i_mchb
      from mara as a inner join mchb as b
      on amatnr eq bmatnr
      where b~matnr in s_matnr and
            b~werks in s_werks and
            b~lgort in s_lgort.
if sy-subrc <> 0.
    g_exit = c_flag.
    message s899 with 'No Data found for the Selection Criteria'(006).
    stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform.                    " get_mat_stock_data
*&      Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
    clear i_plant.
    refresh i_plant.
    select werks      " Plant
           name1      " Name
      into table i_plant
      from t001w
      for all entries in i_mchb
      where werks = i_mchb-werks.
Get the Material Description from MAKT Table
    clear i_makt.
    refresh i_makt.
    select matnr      " Material number
           maktx      " Material Description
      into table i_makt
      from makt
      for all entries in i_mchb
      where matnr = i_mchb-matnr and
            spras = sy-langu.
    sort i_plant by werks.
    delete adjacent duplicates from i_plant comparing werks.
    sort i_makt by matnr.
    delete adjacent duplicates from i_makt comparing matnr.
endif.
endform.                   "form get_plant_grp_data.
*&      Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
         l_tabix like sy-tabix.
if not i_mchb[] is initial.
    loop at i_mchb.
      l_tabix = sy-tabix.
      clear l_matbatch.
      concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
      move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
        read table i_plant with key werks = i_mchb-werks binary search.
        if sy-subrc = 0.
          i_output-name1 = i_plant-name1.
        endif.
Get the Material Description from i_makt Table
      read table i_makt with key matnr = i_mchb-matnr binary search.
      if sy-subrc = 0.
        i_output-maktx = i_makt-maktx.
      endif.
Get the Characteristic Values data from INOB and AUSP Tables
      clear inob.
      select single cuobj from inob
          into inob-cuobj
          where klart = c_klart and
                obtab = c_obtab and
                objek = l_matbatch.
      if sy-subrc = 0.
        select objek
               atinn
               atflv
           from ausp
           into table i_ausp
           where objek = inob-cuobj and
                 atinn in s_atinn   and
                 klart = c_klart.
        sort i_ausp by objek atinn.
        loop at i_ausp.
          clear cabn.
          select single atinn atnam from cabn
                     into (cabn-atinn,cabn-atnam)
                     where atinn = i_ausp-atinn.
          if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
            if cabn-atnam cs c_ratio.
              if i_ausp-atflv between c_13 and c_1499.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
              elseif i_ausp-atflv between c_15 and c_1699.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
              elseif i_ausp-atflv between c_17 and c_1899.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
              elseif i_ausp-atflv between c_19 and c_2099.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
              elseif i_ausp-atflv between c_21 and c_2299.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
              elseif i_ausp-atflv >= c_23.
                i_mchb-atflo = i_ausp-atflv.
                i_mchb-atflv = c_23.
              endif.           " Condition for RATIO values
            else.              " If characteristic does contain RATIO
              i_mchb-atflv = i_ausp-atflv.
            endif.
            i_output-atinn = cabn-atinn.
            i_output-atnam = cabn-atnam.
            i_output-atflv = i_ausp-atflv.
            i_mchb1-matnr = i_mchb-matnr.
            i_mchb1-werks = i_mchb-werks.
            i_mchb1-lgort = i_mchb-lgort.
            i_mchb1-charg = i_mchb-charg.
            i_mchb1-clabs = i_mchb-clabs.
            i_mchb1-atinn = i_ausp-atinn.
            i_mchb1-atflo = i_mchb-atflv.
            i_mchb1-atflv = i_ausp-atflv.
            append : i_output, i_mchb1.
            clear i_mchb1.
            modify i_mchb index l_tabix transporting atflo atflv .
          endif.
        endloop.
      endif.
    endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
    sort i_output by atinn werks matnr atflv.
else.
    g_exit = c_flag.
    message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform.                    "append_final_data
*&      Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
    l_tabix = sy-tabix.
At new Characteristic
     at new atinn.
      read table i_output1 index l_tabix.
      format color 1 intensified on.
      write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
             23(40) i_output1-atnam,
             125 sy-vline.
      format color off.
      format color 4 intensified on.
      write: /1 sy-vline, 2(20) 'Plant Name         :'(022),
             23(4) i_output1-werks, 29(30) i_output1-name1,
             125 sy-vline.
      format color off.
      write /1(125) sy-uline.
    endat.
    clear: g_clabs, g_clabs1.
    format color col_normal.
    write :/1 sy-vline, 2(18)   i_output1-matnr,
           20 sy-vline, 21(40) i_output1-maktx,
           61 sy-vline.
    if i_output1-atflv = c_c23.
      write: 62(22) c_g23 centered.
    else.
      shift i_output1-atflv left deleting leading space.
      write: 62(22) i_output1-atflv centered.
    endif.
    write: 84     sy-vline,
           103     sy-vline,
           110(5) i_output1-meins.
If the quantity value is negative
    if i_output1-clabs ge 0.
      write: 85(18) i_output1-clabs unit i_mchb-meins,
            125     sy-vline.
    else.
      i_output1-clabs = - i_output1-clabs.
      write i_output1-clabs unit i_mchb-meins to g_clabs1.
      condense g_clabs1.
      concatenate '(' g_clabs1 ')' into g_clabs separated by space.
      write: 85(18) g_clabs right-justified,
           125 sy-vline.
    endif.
    format color off.
    hide : i_output1.
    new-line.
At end of material
    at end of matnr.
      sum.
      move : i_output1-matnr to g_matnr.
      format color 3 intensified on.
      write /1(125) sy-uline.
      write :/1 sy-vline, 2(25) 'Total for Material      :'(012),
             28(18) g_matnr.
      if i_output1-clabs ge 0.
        write: 85(18) i_output1-clabs unit i_mchb-meins,
        125 sy-vline.
      else.
        i_output1-clabs = - i_output1-clabs.
        write i_output1-clabs unit i_mchb-meins to g_clabs1.
        condense g_clabs1.
        concatenate '(' g_clabs1 ')' into g_clabs separated by space.
        write: 85(18) g_clabs right-justified,
             125 sy-vline.
      endif.
      write: 125 sy-vline.
      format color off.
      write /1(125) sy-uline.
    endat.
At end of plant
    at end of werks.
      sum.
      move : i_output1-werks to g_werks.
      format color 3 intensified off.
      write :/1 sy-vline, 2(25) 'Total for Plant          :'(013),
             28(4) g_werks.
      if i_output1-clabs ge 0.
        write: 85(18) i_output1-clabs unit i_mchb-meins,
        125 sy-vline.
      else.
        i_output1-clabs = - i_output1-clabs.
        write i_output1-clabs unit i_mchb-meins to g_clabs1.
        condense g_clabs1.
        concatenate '(' g_clabs1 ')' into g_clabs separated by space.
        write: 85(18) g_clabs right-justified,
             125 sy-vline.
      endif.
      format color off.
      write /1(125) sy-uline.
    endat.
At end of characteristic
    at end of atinn.
      read table i_output1 index l_tabix.
      sum.
      format color 3 intensified on.
      write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
             28(25) i_output1-atnam.
      if i_output1-clabs ge 0.
        write: 85(18) i_output1-clabs unit i_mchb-meins,
        125 sy-vline.
      else.
        i_output1-clabs = - i_output1-clabs.
        write i_output1-clabs unit i_mchb-meins to g_clabs1.
        condense g_clabs1.
        concatenate '(' g_clabs1 ')' into g_clabs separated by space.
        write: 85(18) g_clabs right-justified,
             125 sy-vline.
      endif.
      format color off.
      write /1(125) sy-uline.
    endat.
endloop.
endform.                    " display_report
*&      Form DISPLAY_BATCH
     Display the batch details for the seclected material            *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
     g_cursor = c_cursor2 or
     g_cursor = c_cursor3 or
     g_cursor = c_cursor4 or
     g_cursor = c_cursor5 or
     g_cursor = c_cursor6.
    format color 3.
    write: /1 sy-vline,
            2(17) 'Material Number :'(020),
           20(17) i_output1-matnr,
           94 sy-vline.
    format color off.
    write /1(94) sy-uline.
    loop at i_mchb1 where matnr = i_output1-matnr and
                          atinn = i_output1-atinn and
                          atflo = i_output1-atflv.
      format color col_normal.
      shift i_mchb1-charg left deleting leading '0'.
      write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
             18 sy-vline, 19(17) i_mchb1-charg centered,
             36 sy-vline.
      if i_output1-atnam cs c_ratio.
        write: 37(29) i_mchb1-atflv
                       exponent 0 decimals 2 centered.
      else.
        write : 37(29) i_mchb1-atflv
                      exponent 0 decimals 0 centered.
      endif.
      write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
              94 sy-vline.
      format color off.
    endloop.
    write /1(94) sy-uline.
else.
    message s899 with 'Invalid cursor position'(016).
    exit.
endif.
endform.                    " DISPLAY_BATCH
*&      Form HEADING_SECLIST
      Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
         18 sy-vline, 19(17) 'Batch Number'(017) centered,
         36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
         66 sy-vline, 67(27) 'Quantity'(019) centered,
         94 sy-vline.
write /1(94) sy-uline.
format color off.
endform.                    " HEADING_SECLIST
*&      Form COLLECT_RATIO
      Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
    clear g_atinn.
    i_output1-atinn = i_output-atinn.
    i_output1-atnam = i_output-atnam .
    i_output1-werks = i_output-werks.
    i_output1-name1 = i_output-name1.
    i_output1-matnr = i_output-matnr.
    i_output1-maktx = i_output-maktx.
    i_output1-clabs = i_output-clabs.
    i_output1-meins = i_output-meins.
    call function 'CONVERSION_EXIT_ATINN_OUTPUT'
         exporting
              input = i_output-atinn
         importing
              output = g_atinn.
    if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
      if i_output-atflv between c_13 and c_1499.
        i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
      elseif i_output-atflv between c_15 and c_1699.
        i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
      elseif i_output-atflv between c_17 and c_1899.
        i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
      elseif i_output-atflv between c_19 and c_2099.
        i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
      elseif i_output-atflv between c_21 and c_2299.
        i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
      elseif i_output-atflv >= c_23.
        i_output1-atflv = c_23.
      endif.
      write i_output1-atflv to i_output1-atflv .
    else.
      write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
    endif.
    collect i_output1.
    clear   i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform.                    " COLLECT_RATIO
Reward if useful..
Regards,
Anji

Table for link between Accounting document and Billing document

Which is the table for link between Accounting document and Billing document ?
Thanks & Regards

Ø Go to SE16N, enter table BSAD
Ø In the Reference Field (VBELN) enter the Billing Document no.
Tips:
Ø Make sure that only those billing documents will be considered whose accounting documents actually exists
Ø No Accounting documents will be displayed for Credits, Free of charge orders and those acc. Documents which have been cancelled.

Link Between OINV Table And OBTN Table

I want to create relationship b/w A/R Invoice and Batch Number transaction Reports table.
sap point out two tables of Batch Number Transaction Report RBTN and OBTN,Problem is that i never found any table with name of RBTN.
plz tell me what is RBTN table???why its not in sql database and how i can create link b/w A/R invoice and Issue for production .

Hi Vinu.........
Welcome to SAP Business One Forum............
Please check the link between these tables........
SELECT Distinct T1.BatchNum
FROM IBT1 T0
Inner Join OIBT T1 On T0.BatchNum=T1.BatchNum AND T1.ItemCode=T0.ItemCode
INNER JOIN DLN1 T2 ON T2.DocEntry=T0.BaseEntry AND T2.ItemCode=T0.ItemCode
inner join ODLN T3 on T2.DocEntry = T3.DocEntry LEFT JOIN INV1 T4 On T4.BaseEntry=T2.DocEntry Left Outer Join OINV T5 On T5.DocEntry=T4.DocEntry
WHERE T0.BaseType = 15
Hope this will help you........
Regards,
Rahul

How to get the link between MCH1, AUSP, CAWN and CAWNT tables

Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar

Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar

Link Between PSA and Data Targets

Hi Experts,
Could you please help me is there any table which will have PSA & data target (Cube or ODS) details.
I know the table which will have data target manage screen details and other table wil give the details like data loaded into till PSA.
But i want to know any SAP table will have link between PSA & data target.
I want to know if the request is loaded till PSA or it is loaded into data target.
Any table will give details like PSA request no, if target is there then some kind of flag like....
Please let me know if any one know the table which will have PSA as well as Data target details.
Thaks in Advance
Shaik

Hi,
I clearly mentioned im aware of Manage screen details table, i want link between PSA and Data target table which will return if requst loaded till PSA or PSA & target.
Im using BI 7.0 .
Regards
Shaik

Can anybody provide me the link between these tables

Hello,
Can anybody provide me with the link between these tables.
Is there any link for the CTSNUMC and PNTPR
1) /SAPSLL/CTSNUMC
         Fields: STCTS
                   CCNGN
2) /SAPSLL/PRGEN
        Fields : ATTR20A
                  ATTR05A
                  ATTR10A
                  ATTR05B
Common field -
GUID PR
3) /SAPSLL/PNTPR
        Fields : PRVSY
                : GRVSY
Common field -
GUID PR
4) /SAPSLL/PRODUCT_SELECT_UI_S "This is Structure
         Fields : QUAL_STA " Product Status
               Common field : CCNGN, STCTS
5) /SAPSLL/PR
           Fields : CRTSP " Product Created on
                    : CHTSP " Product Changed on
Common field -
GUID PR
6) /SAPSLL/PRT
      Fields : PRTXT " Materail Desc
Common field -
GUID PR
I have common fileds for all the tables to join them except for the tables /SAPSLL/CTSNUMC and
SAPSLL/PRGEN.
Any suggestions will be apprecaited.
Regards,
Kittu

Hi,
Thank you every body for your time...
I am closing this thread as there was no response and I think I solved it.
Regards,
Kittu

Table to link in b/w plant and purchase org for material?

Hi Gurus,
what is the table to link in b/w plant and purchase org for material?
I want to know the materials available for particular plant and purchase org combination..
thanks in advance..

hi
plz check that the materials are created on basis of PLANTS
so u can get list of materials plant wise in MM60
now this plants may be assigned to different P Org ,so u have to find that PO to plant linkage
if u need all this on one report then try to create a new z programme or use query writting
regards
kunal

Is there a DIRECT link between SD schedule lines and delivery lines?

Is there a direct link (db table) between schedule lines on a sales order (VBEP) and the delivery lines (LIPS)?
Is there a function module to retrieve the data?
Example-
One order line with 3 schedule lines.
Each schedule line is for 2 units (total of 6 units).
Three deliveries made. 1st is for 2 units, 2nd is for 1 unit (backorder), 3rd is for 3 units.
You can use document flow (table VBFA) or examine the SD document in the delivery line (LIPS) and link the delivery line to the order line. The schedule line already references the order line.
I am using math to decrement the schedule lines used and make the link between VBEP and LIPS. It works fine. I need four records back....
1st schedule line for 2 units uses delivery 123
2nd schedule line for 1 unit (partial) uses delivery 124
2nd schedule line for 1 unit (partial) uses delivery 125
3rd schedule line for 2 units uses delivery 125
Like I said, it works. Just wondering if I missed a more direct link.

As far as Db link is concern , I dont remember exactly , but 3 years before I had written a report which see Sales order schedule lines and devilry note lines against sales order. If you see process wise. when ever you create PO ( production order you assign some qty using 101 movement type .. and against production order you also give sales order . When you do delivery ( run seclude run ) it delivers against that material number , its movement is 601 ...
but I remember theres a link between these tables, VBAP,VBFA AND VBEP , LIPS ... against every sales order you can see sales invoice ( VBRP,VBRK) and you can also see your delivery note number in document flow .
I hope thisll give you some guide line, as right now I can not tell you the exact business process but I remember I written a report in SD 4 years before , in which they required Delivery against production order and sales order ... One more thing you also have production order reference on delivery item number. ( field :Empst ) . I think in my project they were maintaining this field .
Thanks

Link between schedule Line Number and Delivery

Is there a link between Schedule line Number and Delivery number ?
Eg. Line item 10 with quantity 100.
has 5 schedule lines..with 5 different delivery dates.
1 . quanity 40
2.   quantity 30
3.   quantity 20
4.   quanity 6
5    quantity 4
For schedule line 1, 2 deliveries were created,
one      with quantity 20
another with quantity 15
quantity 5 is still not delivered.
also schedule lines 2,3,4 and 5 are fully delivered.
Is there any table, FM etc in SAP which will give me the link between the schedule line and delivery number ?
Total deliveries created : 6. - But which delivery corresponds to which schedule line ?
Please dont tell me to look VGBEL and VGPOS.. that will just give line item number 10.. I need to get the schedule line number.
Also, RV_SCHEDULE_CHECK_DELIVERIES --> will give me the delivered quantity against each schedule line.
My purpose is to create an ontime delivery report .
a report which list each schedule lines, and tell, how many shipments were late/ontime/early etc..
and for Late ones, how many days late has to be found.
this is where i need the delivery.
No. Of days Late = Actual GI Date - Planned GI Date.
Actual GI date is in the delivery.
Any suggestions ?
Thank you in advance.

Hi,
Check in the below link.
relation between VBEP-ETENR and LIKP-VBELN
Thanks,
Sree.

Link between Service Entry Sheet and Material Document

Hi
I am busy with developing a report where i am required to find the link between the Material Document and Service Entry Sheet.
I am aware that on the Purchase Order Data tab of the Material Document has the service entry sheet number and line item. However the problem I have picked up here is in the event I create a Service Entry Sheet with a service in line 1 and for some reason Delete that Line and then capture the service again, it is saved in table ESLL as line 2. This is correct. However when I have a look at the material document, it references it as line 1 of the service entry. Is there any way to get this in sync?
Thanks
Vinesh

Thanks
This table does show the service entry sheet number and line item however the line item does not correspond with the line item on the service entry sheet.
Eg.
I create a service entry sheet where I capture a service in line 1.
I delete Line 1
I recapture on line 2.
Post Service Entry
The Material Doc reference document is the service entry however the line item for the reference is 1.
I need to try and link the line items
Thanks
Vinesh

Technical link between a PM order and its operations (routing number)

Hi all,
I would like to know how to make link between a PM order and its routing number for operations in the order (field AUFPL) ?
Thank you.
Regards.
Laurent.

Hi again,
I just found function module CO_DB_HEADER_READ.
With Order Number as import parameter you got in export parameter CAUFWA value AUFPL.
Then with +AFV+* tables, you have operations data.
Regards.
Laurent.

Link between Inbound Idoc No and Shipment No

Can anyone tell me in which transparent table the link between the Inbound Idoc number and Shipment number are stored ?
or is any function module in which the Shipment number is imported and the Idoc number is exported ?
Thanx in advance.
Regards.

Hi Deepa,
Please reward and close your other related post. Now here is the answer for this.
As I mentioned in response to your previous post, this is stored in the status records of the IDoc. So you need to go to table EDIDS with your IDoc number and STATUS = 53(Application Document Posted). Read teh value in the field 'STATXT'. If there are any & they should be replaced by 'STAPA1', 'STAPA2', 'STAPA3' and 'STAPA4' depending on how many '&' you have.
One of these 4 parameters will be your shipment number, typically it will be STAPA1.
Let me know how it goes.
Regards,
Srinivas

Table display link between PSA Table name and corresponding Datasource

Similar Messages

Maybe you are looking for