Table EKPO - PO Active/Closed Indicator field exist ?

Hi,
I am not an MM guy. But, i am writing a report based on MM.
I would like to know, whether any indicator field exist in EKPO table, that will give the status of an PO for a given material ? If exist, what is the name of the field and what value does it contain that indicates, whether the PO is active/closed ?
If not in EKPO table, then which table/field contains the above required info, which will also have matnr and werks fields within it ?
Thanks,
Gaurav.

Hi,
please check EKPO-STAPO which is a statistical indicator.
If a purchase order item is deleted, the item is marked as 'statistical'
(field EKPO-STAPO = X) .
However, if for the item the final invoice indicator (EKPO-EREKZ) or the
inward delivery completed indicator (EKPO-ELIKZ) is set, the item is not
marked as 'statistical' (EKPO-STAPO is not set).
Just in case it is needed, note 358293 contains report zkstapo to correct ekpo-stapo where the
field is set but no deletion indicator is set.
Regards,
Edit

Similar Messages

How to update ABSKZ field in the table EKPO

Hi
Is there any way to update the rejection indicator (ABSKZ) field of table EKPO?.
I am looking at BAPI_CHANGE_PO FM, But it does not have ABSKZ field in the item structure BAPIMEPOITEM.
Do I need to extend the BAPI structure with ABSKZ field ?
Regards
Raj.

Hi
To extend BAPI_PO_CHANGE for EKPO-ABSKZ field , we have to add field in the structure BAPI_TE_MEPOITEM to pass it to EXTENSIONIN. As ABSKZ field already availble in the EKPO it is not allowed to add ABSKZ in the structure BAPI_TE_MEPOITEM. it is throwing below error message.
Field ABSKZ in table EKPO is specified twice. Please check
Since it is not Z field and also not availble in the structure BAPIMEPOITEM not sure how to update ABSKZ field in the EKPO table.
Please advice.
Regards
Raj

Field KZWI4 is not getting updated in table EKPO

I have a case where for two scheduling agreements the pricing procedure getting determined is the same, but the field KZWI4 (subtotal 4) in table EKPO is getting updated for one SA and not for the other. The only difference in the two SAs are the tax codes. Do tax codes have any bearing on the field KZWI4 getting updated in table EKPO?
Regards,
Pratima.

Hi Pratima,
unfortunately i can only write that I am facing the same challenge at the moment. I will update the discussion as soon as I have a solution.
Best regards
Bjoern

How to attach search help in field BEDNR in table EKPO

Hello, Experts!!!
I have a problem in attaching Search Help in field BEDNR in table EKPO.
Can anyone share something about this.. I've been dwelling on this for some time now,
but still wasn't able to find a solution.
Any thoughts would be highly appreciated.
Thank you!!!
Ellainne22

Hi,
I don't think you can directly link any search help with BEDNR without modification. If a search help was already linked, we could have gone for append search help. But in this case, nothing is there. So the options would be,
see whether you can insert any search help through enhancements in the screens..You have to do it in every screen then.
Other option is create a database view, & replace the dataelement with your own with a search help. You can refer this view after that.
or go for modification & change the dataelement.
Regards,
Gokul

Reversal Indicator Field Not reflecting Correctly In BW

Hi All,
The deletion indicator coming from the DataSource 2LIS_02_ITM is not working properly for few entries and in BW its mapped to Reversal Indicator (Storno)
When we checked, we found that the deletion indicator is not working for the items which are non-statistical in a Purchase Order.
The problem is the Non statistical items when deleted in a PO in R/3, in EKPO table the deletion indicator is set to 'X' for these PO's but when extracted into BW the Reversal Indicator Field is coming as blank but it should be reflected as "R" as per OSS note 578471. But these changes are not getting reflected into BW.
Any suggestions guys?
Thanks.

AM,
Also, what is happening is that the record with KF's as negative and Reversal Indicator as "R" is coming in PSA as well as in New Data table, but when activated its disappearing from the new data table.
Finally its displaying in Change Log table with both the records i.e original one and the deleted one but again without Reversal Indicator "R".
--> This behavior very much fine. Datasource:2LIS_02_ITM is to load for CUBE not to ODS.
Please answer below:
--> Are you loading data into an ODS in Additive or Overwrite mode..?
--> 0RECORDMODE mapped to storn(cancel indicator...?)
If you load data into cube, then it works fine
Srini

OWB 9.2: Active Job Does not Exist !

OWB:9.2.0.2.8
I have opened a TAR for this, not much headway so far
Error Message: ORA-20211: Active job does not exist, cannot link to job record.
Here is the sequence of events
1) A test database was cloned fom production
2) We were able to to get the runtime instance on test running by setting the fields in wb_rt_service_nodes
Service doctor now indicated that the service was up
3) Using OWB deployment mangager, I tried to execute a map and got this message
Starting Execution EU_ITM_WH
Starting Task EU_ITM_WH
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "OWB_RR.WB_RT_MAPAUDIT", line 1252
ORA-06512: at "OWB_RR.WB_RT_MAPAUDIT", line 2084
ORA-06512: at "OWB_TS.EU_ITM_WH", line 2250
ORA-06512: at "OWB_TS.EU_ITM_WH", line 2331
ORA-06512: at line 1
Completing Task EU_ITM_WH
Completing Execution EU_ITM_WH
I searched Metalink and got some references to this.but they seem out-dated.

Did you try to stop and start the runtime sevice by using stop_service.sql/start_service.sql from the <OWB_HOME>/owb/rtp/sql directory?
Also, you say that you cloned the database - are the database parameters different in the cloned database (db name, hostname, port, user name, password)? If yes, did you change the location registration parameters?
Regards:
Igor

Table AMPL Partly active

Dear ,Frds
i have got one problem when i upgrade the system to 4.7 to ECC 6.0 a Error in between upgrade at the last moment the error is described as below
DDIC and Activation Error S And return Code in SAP AAAA700.RDV
IEEDO519 Table AMPL Could not be Activated.
1ETP111 exit Code 8.
we have Ignore this phase and also i have delete the Request in which the object is present or attached .after that when the upgrade is completed when creating a PO it will create a Dump when EDIT the PO.
The Table Error is
Transp. Table AMPL Partly active
Short Description Table of Approved Manufacturer Parts
Enhancement category Selected category inconsistent with implicit enhancement category
Implicit Enhancement Category :- can be enhanced char type or numeric.
Check table CI_AMPL
Field MANDT does not lie within customer namespace
Table CI_AMPL was checked with warnings
Adjustment of active dependent objects
TABL AMPL is inconsistent in active version
Check table AMPL (DEV/14.07.09/00:04)
Current enhancement category Can Be Enhanced (Char. Type) is incorrect
The following enhancement categories can be selected:
Can Be Enhanced (Numeric or Char. Type),Can Be Enhanced (Deep)
Field MANDT in table AMPL is specified twice. Please check
Foreign key AMPL-MANDT (foreign key was deleted)
No data exists (structure change caused by DROP / CREATE)
AMPL: Structure change at field level (DB is adjusted)
Check on table AMPL resulted in errors
TABL AMPL_ATTEMPTS is inconsistent in active version
Check table AMPL_ATTEMPTS (DEV/14.07.09/00:04)
Current enhancement category Can Be Enhanced (Char. Type) is incorrect
The following enhancement categories can be selected:
Can Be Enhanced (Numeric or Char. Type),Can Be Enhanced (Deep)
Check on table AMPL_ATTEMPTS resulted in errors
TABL VAAMPL was adjusted
TABL VAMPL is inconsistent in active version
Check table VAMPL (DEV/14.07.09/00:04)
Current enhancement category Can Be Enhanced (Char. Type) is incorrect
The following enhancement categories can be selected:
Can Be Enhanced (Numeric or Char. Type),Can Be Enhanced (Deep)
Check on table VAMPL resulted in errors
regards Ritesh sharma

Hi,
Just check the CI_AMPL structure to see if the MANDT field is also specifed there.
If yes then remove it.
Check each and every include structure in AMPL and then activate the same.
Finally adjust and activate the table via transaction SE14.
This would solve your issue.
Regards,
Ankur Parab

Need to activate Tables during DDIC Activation Phase

Hi Experts,
I am trying to import support packs from SAPKB70009 to SAPKA70011 in a fresh ECC 6.0 IDES Installation. During the DDIC activation phase it got stuck. Request you to please help me with the activation of following tables:
Table YCRM01_S_BUPM could not be activated
Table YTEL01_S_BUPM could not be activated
Table ZICMAG_S_BUPM could not be activated
When I checked in SE11, the above tables are already active in state.
I have found one link on forum:
support package error
Tried activating RATE component too, but after saving and trying to activate, got following error message:
TABL YCRM01_S_BUPM was not activated
Check table YCRM01_S_BUPM (BASIS/31.07.10/14:29)
Field RATE: Component type or domain used not active or does not exist
Nametab for table YCRM01_S_BUPM cannot be generated
Check on table YCRM01_S_BUPM resulted in errors
I have noticed that the component RATE is containing Component Type PRP_RATE without any definition for Data Type and description. I believe the missing definition here is the source of not able to activate the table here.
Any suggestions? Please help.
Thanks and Regards,
Naresh.
Edited by: naresh_nmi on Jul 31, 2010 12:22 PM

Hi,
I created manually PRP_RATE as data element and gone ahead with the imports of Support Package. DDIC activation phase passed through.
Regards,
Naresh.

Select statement for Active Kit Indicator

Hi All ,
I am using C_AKIn AS CHECKBOX as a check box for Active Kit indicator . If i won't chose then it will not check the condition but if the Active Kit indicator is selected, then Program shall check for the live Kits from the range of Material No. entered. The live Kit is the Material which is having Unrestricted Stock at Plant level (Table: MARD Field LABST) or Forecast at Plant level (Table PBIM Field BDZEI  Table PBED Field PLNMG) or both.
Forecast shall be considered for four periods (Current + 3 Months) in future, means if the Material having the forecast in current month + 3 months is to be considered as Active Material (Table PBED Field PDATU)
Validation :-
1.MRP Type (Table MARC Field DISMM) shall not be equal to CS or PE
2.Current corrected forecast or any of the 3 future corrected forecasts not equal to zero.

Hi,
Try using IN stmt.
SELECT MBLNR
MJAHR
BUDAT
XBLNR
FROM MKPF INTO CORRESPONDING FIELDS OF TABLE ITMKPF
WHERE BUDAT IN S_BUDAT.
reward if helpful
Regards
Azad.

Missing class for indicator field value [changed-fields-locking-policy]

------- 
Edit: 
Please, ignore the post below. I found the problem here. The real problem is reported in my other post. 
------- 
 
Hello, 
 
In order to test the optimistic locking by fields, I created a very simple TopLink project via the TopLink Workbench. It only consists of one table that was mapped via TopLink's own "Add or Update Existing Tables from Database". I made no modifications to the automatically generated mappings. 
 
After I set up the rest of the project, I ran it and it ran okay. 
 
Then I went to the table descriptor, then to the "Locking" tab, and then I selected "Optimistic Locking" -> "By Fields" -> "Changed Fields". 
 
That was ALL I changed. 
 
And when I tried to run the project this time, I got the following exception:
<blockquote>
Exception [TOPLINK-43] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DescriptorException
Exception Description: Missing class for indicator field value [toplink:changed-fields-locking-policy] of type [class java.lang.String]. 
Descriptor: XMLDescriptor(oracle.toplink.descriptors.VersionLockingPolicy --> [DatabaseTable(locking-policy)]) 
 at oracle.toplink.exceptions.DescriptorException.missingClassForIndicatorFieldValue(DescriptorException.java:878) 
 at oracle.toplink.internal.ox.QNameInheritancePolicy.classFromRow(QNameInheritancePolicy.java:109) 
 at oracle.toplink.mappings.foundation.AbstractCompositeObjectMapping.valueFromRow(AbstractCompositeObjectMapping.java:150) 
 at oracle.toplink.mappings.DatabaseMapping.readFromRowIntoObject(DatabaseMapping.java:1012) 
 at oracle.toplink.internal.descriptors.ObjectBuilder.buildAttributesIntoObject(ObjectBuilder.java:241) 
 at oracle.toplink.internal.ox.XMLObjectBuilder.buildObject(XMLObjectBuilder.java:128) 
 at oracle.toplink.ox.mappings.XMLCompositeCollectionMapping.buildCompositeObject(XMLCompositeCollectionMapping.java:157) 
 at oracle.toplink.mappings.foundation.AbstractCompositeCollectionMapping.valueFromRow(AbstractCompositeCollectionMapping.java:735) 
 at oracle.toplink.mappings.DatabaseMapping.readFromRowIntoObject(DatabaseMapping.java:1012) 
 at oracle.toplink.internal.descriptors.ObjectBuilder.buildAttributesIntoObject(ObjectBuilder.java:241) 
 at oracle.toplink.internal.ox.XMLObjectBuilder.buildObject(XMLObjectBuilder.java:128) 
 at oracle.toplink.internal.ox.record.DOMUnmarshaller.xmlToObject(DOMUnmarshaller.java:284) 
 at oracle.toplink.internal.ox.record.DOMUnmarshaller.xmlToObject(DOMUnmarshaller.java:265) 
 at oracle.toplink.internal.ox.record.DOMUnmarshaller.unmarshal(DOMUnmarshaller.java:152) 
 at oracle.toplink.ox.XMLUnmarshaller.unmarshal(XMLUnmarshaller.java:339) 
 at oracle.toplink.tools.workbench.XMLProjectReader.read(XMLProjectReader.java:162) 
 at oracle.toplink.tools.workbench.XMLProjectReader.read(XMLProjectReader.java:209) 
 at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.loadProjectConfig(TopLinkSessionsFactory.java:307) 
 at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.createSession(TopLinkSessionsFactory.java:241) 
 at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildServerSessionConfig(TopLinkSessionsFactory.java:215) 
 at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildSession(TopLinkSessionsFactory.java:168) 
 at oracle.toplink.tools.sessionconfiguration.TopLinkSessionsFactory.buildTopLinkSessions(TopLinkSessionsFactory.java:124) 
 at oracle.toplink.tools.sessionconfiguration.XMLSessionConfigLoader.load(XMLSessionConfigLoader.java:103)
</blockquote>
Can anybody tell me what that means? And why do I see "VersionLockingPolicy" in the stack trace? I explicitly specified locking "By Fields". 
 
Here's a fragment from the project XML file:
<blockquote>
<toplink:locking xsi:type="toplink:changed-fields-locking-policy"/>
</blockquote>
Is this a TopLink bug or am I doing something wrong? (By the way, if I choose optimistic locking by "All fields", it works. But locking by "Changed fields" doesn't.) 
 
Best regards, 
Bisser
Message was edited by:
bisser

Ooooops, sorry, guys!
I was using TopLink 10.1.3.0 JARs to run a project created via TopLink 10.1.3.1 Workbench. That was the reason for the exception.
I ran across the REAL problem, however. The one that was occurring when I created the TopLink project via JDeveloper 10.1.3.1 and ran it via JDeveloper 10.1.3.1. That's why I decided to try with TopLink 10.1.3.1 Workbench instead of JDeveloper 10.1.3.1.
I will report the problem in a clean separate post.

BAPI_ALM_ORDER_MAINTAIN not Updating Special stock indicator field

Hi Experts
I am using BAPI_ALM_ORDER_MAINTAIN to create and then update a Customer Service Order. When am trying to update the Special stock indicator field in the Components Tab(of IW32) through BAPI, its not doing so, and no error is thrown as well.
The required qty and the batch field in the components tab get updated which ensures that the logic am using is the correct one.
Please let me know if anyone has faced such a situation before. Any workaround(some other FM) to update this field is also welcome.
Points guaranteed.
Thanks
Kulpreet Singh.

Hi!
BAPI_ALM_ORDER_MAINTAIN is only updating a field, when you set the update flag also in CHANGE method.
So if you are maintainig the IT_COMPONENT table, you have to put an 'X' into the same field in the IT_COMPONENT_UP table also.
And of course don't forget to commit the modification.
Regards
Tamá

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

Object Indicator field in Report painter

we are looking for some field details in RWCOOM table like object indicator. There is object indicator field name in CCSS table. We want to ignore planned cost of service orders from the project planned cost as there is already planing of cost at project level. The same cost element is used for cost planning in Project builder and service order
Please provide us some option where we can restrict planned cost of the
orders other than network to show in project reports.
Thanks & Regards,
Ranjan

In general data selection, i have already cost center, but it is not apprearing at selection screen. Only three field are appearing (Year + Period + Forecast), and i want to add cost center at the selection screen. How to make cost center field at selection field from General data selection option. Please guide me
Thank in stack
Nilesh Shete

Missing class indicator field from database row

Hi,
I have following problem :
There is a class inheritance with root interface and 4 subclasses, they are initialized with class indicator field. If I use ReadAllQuery with an interface or some of concrete class as search class - it is working perfect, but if I try to build query with custom selected fields (addPartialAttribute) I always get an error - Missing class indicator field from database row.
AFAIK This field have not to be mapped in Workbench to real table column, how can I tell TopLink that I will read this indicator field too by reading some custom fields ? I thought TopLink reads such fields automatically, like it does it with primary keys.
Thank you
Maksim

This sounds like an issue with our partial attribute queries and inheritance as the type indicator column must always be read. Can you map the type indicator to a read-only attribute (mark mapping as read-only) and include this in your list of attributes as a work-around?
Doug

Table name for purchase order delivery fields

Hi Gurus,
Can you please tell me the name of the tables and the joining condition for purchase order delivery details like Name, street , city, postal code, address detail and the joining condition?
Regards
MD. SAMY

Hi MD. SAMY,
1. Table EKPO has details lat line item level.
2. You must make a simple ABAP program in the infosets (or functional area) that contain a line "addrnumber = ekpo-adrnr" while addrnumber is ADRC table field.
3. Choose fields that you want in ADRC and put it into new fields (e.g. : DELI_NAME2 = adrc-name2., etc)
4. The new field attribute must be maintained in the infosets (in EXSTRA).
5. Now in the query you have those fields.
Regards,
Sameer

Table EKPO - PO Active/Closed Indicator field exist ?

Similar Messages

Maybe you are looking for