Table entries not getting displayed in desired format

Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.

That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian

Similar Messages

Saved entry not getting displayed in calendar

Hello,
We are trying to update calendar with a new entry, it get save.
But when we try to look into Calendar, it is not getting displayed anywhere. Also tried for other days, but the same result appearing.
Please advise on this.
Thanks & Regards,
Jayashri

check if you have enabled "Group Calendar Options" for your calendar view.
To check this, go to the "Title, description and navigation" settings page for the calendar (this is the first option under "General Settings" on the List Settings page), In the "Group Calendar Settings" sections, set it as "No"
--Cheers

Time From field is not getting displayed in correct format in Activities

Hello Experts ,
We are facing one problem in UI , when we search for Activities in Web UI . In the field "Time From" we are not getting the time in correct format , ie is instead of getting time as say 13::38 we are getting time as 13::3 , but when we place cursor on it the field it shows correct format say 13::38.
Can any one suggest how to display in correct format ?
Regards
Vinayak

Hi,
Its an SAP Product error.
Please check note 1151821 ,if you facing the greyed button in time.Also the other note 1136402 needs to be applied for time display issue
- Bobby

Database table entries not getting viewed on SAP Screen

Hi
I have created Z-Code to update a standard SAP table. After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
Thanks
Tushar

>
Tushar Gawande wrote:
> Hi
> I have created Z-Code to update a standard SAP table. After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
> Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
> Thanks
> Tushar
/slap your hands
You're missing some common sense and the knowledge to be tasked to do such a thing. And the person/consultant who gave you this task as well.

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Table PA0045 is getting updated but data is not getting displayed in Infty

Hi,
When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
Regards,
Jyoti

Check if there is proper data to be shown in the tabstrip.
EX.. Loan Amount Granted in the Tabstrip Basicdata ...

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Text not getting displayed in PA40 action.

Hello All,
We upgraded from 4.6 to 5.0. When I doing the hiring or any other action, the text for the action type, reason for action or any other field is not getting displayed. Even when I select the entries the text for that is not getting displayed.
like its displaying only 01- for Action type hiring.
Thank You all in advance for your reponse!
Chakri.

Hello Sharath,
I checked this and this table is having all the values properly maintained. Language, Action, Name of the action is maintained. Is there any place where we need to activate this in order for us to see the name of the action type also when we select an action in PA40.
Thanks a lot for your response.
Chakri.

QS41_Code are not getting displayed

Dear Experts,
Scenario is,
1.     T-Code QS41
2.     Under code groups (of any catalogue) certain codes have been created.
3.     The same entries can be viewed through tables QPCT and QPCD.
4.     Unfortunately we could not see the codes in transaction code QS41, QS42 and QS43.
5.     We checked for authorization related object. But in spite of full authorization codes are not getting displayed.
6.     The message that we got is No entries found that match selection criteria Message no. SV004
Few more inputs,
u2022     Recently patch SPKE500053 for HCM module has been updated in system. Earlier level was SPKE500043.
u2022     Patch SAPKB64021 was updated for BASIS / BW/ ABAP. Earlier level was SAPKB64020.
We are worried that because of these patch upload are we facing this issue? Or else kindly let us know if another solution can be applied
Best Regards,
Anand Rao

Hello Anand
I think that is the sap note to be implemented. i had also come across same issue but do not remember the OSS note number
please look into the below link also for reference
Link: [http://www.sapfans.com/forums/viewtopic.php?f=7&t=316640]
Regards
Gajesh

Excel Charts do not get displayed correctly (colour) !urgent!

Hi,
believe me: I spent days in research to fix my problem but could not find a solution yet...
I use a lot of Excel Web Parts on my SharePoint Site. Basically to display charts or tables. Everything worked fine for months but out of a sudden some of the web parts do not anymore. These Web Parts still get displayed but all in black or grey and
because of that are partly unreadable. For example: a cell with a white font and a blue blackground just gets displayed as a black cell with black fontcolour. I thought it might depends on the settings of the server computer but other colourful charts/tables
still work fine (but on the other hand, all new web parts do not get displayed correctly...)
I tried to remove macros, conditional formatting, creating completely new subsites with content. But the result is always the same: black cells.
Then I tried to just use 8bit-colours and tada: it worked (except of the colour white, that still does not work).. I do not have access to the server computer. And I am wondering because some other charts still work..
Any ideas?
I do not use SharePoint Designer, just the browser version of 2010.
Thanks for your help!!!

Here is the code:
IANode QueryContractResultNode = wdContext.nodeA();
IBNode ToolTipNode = wdContext.nodeToolTipNode();
QueryContractResultNode.invalidate();
for(int i=0; i<searchContractListSize; i++)
   IAElement newQueryContractResultEl =   QueryContractResultNode.createAElement();
WDCopyService.copyCorresponding(getList.getOutput().getI_Detail().get(i),newQueryContractResultEl);
IBElement newToolTipEl = ToolTipNode.createBElement();
if(newQueryContractResultEl.getParentName().length() >= 5)
     newToolTipEl.setChildName (newQueryContractResultEl.getParentName().substring(0,4) + "...");
else
     newToolTipEl.setChildName (newQueryContractResultEl.getParentName());
QueryContractResultNode.addElement(newQueryContractResultEl);
ToolTipNode.addElement(newToolTipEl);
Node A is bound to a model structure. Therefore, the value of A.parentName is set after the RFC execution.
Zita

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

A keyfigure is not getting displayed in the DSO and query

hi friends,
i have newly developed a DSO with 11 keyfigures and with some 10 characteristics. i created DTP , transformations etc., and i loaded data into it and activated it succesfully.
now when i select display data of this DSO one of my keygure is not getting displayed.
even tht same keyfigure is not appearing in the query too.
but when i check the active table of this dso in SE11 , tht keyfigure is displayed with values.
could anyone help through this issue.

Hi
Even I faced such an issue earlier. I could resolve it simply by readjusting the DSO i.e. to delete the keyfigure and add it in the structure once again, before this you have to delete the data in the DSO. Also, if you have a multiprovider on the DSO make sure that the keyfigure concerned is identified.
Let us know if this works for you. Thanks.

WRITE STATEMENT IS GETTING EXECUTED BUT NOT GETTING DISPLAYED

HII All,
i hv created a selection screen with push button. Now when i m clicking that pushbutton, output is not getting displayed..when i debug program ,control enters in switch case and also executes write statement but write statement is not getting displayed.. below is the code ..
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
       WA-EMP_NO = 123.
        WA-EMP_CO = 'A'.
        WA-EMP_N = 'APOORV'.
        APPEND WA TO IT_TAB.
AT SELECTION-SCREEN.
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
        APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
        WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
        LOOP AT IT_TAB1 INTO WA1.
        WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
        ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
          WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.
Plz help me..
Edited by: Julius Bussche on Jan 29, 2009 1:40 PM
Code tags added and please dont use Caps-Lock.

HI,
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
WA-EMP_NO = 123.
WA-EMP_CO = 'A'.
WA-EMP_N = 'APOORV'.
APPEND WA TO IT_TAB.
* AT SELECTION-SCREEN.                 "Comment this
START-OF_SELECTION.                     " Add this
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
LOOP AT IT_TAB1 INTO WA1.
WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.

Values are not getting displayed in screen

Hi Experts,
I have used BAPI_CHARACT_CREATE to upload characteristics(t-code: ct04),
All data are uploaded into the Master Table, while changing the same in t-code ct04 the Value and Description is not getting displayed in screen( in Table control).
NOTE: If i use BAPI_CHARACT_GETDETAIL to get the details of a character i am getting all the values which i have uploaded. (But not in the t-code ct04).
BDC and LSMW is not working for this t-code.
Please help me out.
Thanks and Regards,
LOGU

Hi,
i think you have not released the objects to repository. test and try again..
thanks
karthik

PF No. Not getting displayed in payslip

Dear All,
The PF No. is not getting displayed in the payslip. In pe51 transaction for the form created under Single fields i can see the table maintained as p0587as Table and Table field as EEPFM. The master data is maintained for this employees in IT 0587 and the dates are also maintained correctly but this specific data of PF number is not reflecting in cluster tables. PC00_m40_clstr - > EPF table.
In EPF table i can see the trust ID but the PF number is not getting displayed..
Could anyone of you suggest how to proceed further..
Regards,
Srikanth

Hi Rohith,
Thanks for your response. We are currently on ECC 604 and SP Level 45.
As mentioned earlier here the issue is with PF number. As far as Pan # is concerned we don't have any issue.
The PF number is not getting read in the payroll log itself however it is reading Trust ID field. The data is maintained in IT 0587 for all employees and in PE51 both table and table field are mapped correctly for Provident Fund number Single field. Could anyone suggest and let us know why the PF number is not getting fetched in the payroll log..
Regards,
Srikanth

Table entries not getting displayed in desired format

Similar Messages

Maybe you are looking for