Table& field names for position name(employee) in HR-ABAP

Hi,
wht r the table and fields for the following .
exp: pa0001-plans = employee position number.
employee position name = ?
employee grade level = ?
employee sub grade indicator = ?

Employee Position name:
If you have OM-PA integration active (table T77S0, key "PLOGI-ORGA", value 'X'), then the Description of the Position can be found in HRP1000, like this:
SELECT mc_stext FROM hrp1000 INTO <my_var> WHERE plvar = <active_plvar>
otype = 'S'
objid = PA0001-PLANS.
If integration is disabled, description of the positions are in table T528T (field PLSTX).
If I have understood well, employee grade and sub-grade are data that you can find in PA0008 (fields TRFGR - TRFST).
Otherwise, try to explain me these fields (if they are related to Payroll or Personnel Developement or Personal Administration or..., and so on) and I'll help you.
Hope this helps,
Roby.

Similar Messages

Table & Field Name for Plan Data in CO

Hi All,
Can anyone tell me the table & field name where we can get the planned data in Cost Center Accounting and Profit Center Accounting.
I checked out the COSP(which is Totals) and COEP tables for CCA but i could find the fields only for actual data and not planned data.
Same for PCA...i checked out the GLPCT & GLPCA tables but in vain.
Regards & Thanks
Piyush Kothari.

Hi,
Thanks for the reply but COKL is only for Activity Type which contains Allocation Cost Elements.
I would like to have the Table & Field name for Plan data of Primary Cost Element.
Piyush

Get Table fields name for an SAP table

hi,
i need to pass SAP table name as a parameter to the selection screen of a Report program.
This prog shud give me the table Fields name along with type and length.
Is there any standard SAP report program for the same or i have to write my own logic?
Please advise.
regards,
ags.

Hi,
For your requirement you have to write own program in dynamic manner by using field symbol concept.
Use this FM DDIF_FIELDINFO_GET and get the field information of database table.
call function 'DDIF_FIELDINFO_GET'
    exporting
      tabname        = <master>    u201C Table name
    Tables
      DFIES_TAB      = <table_field> u201C here you will get field information of table
    exceptions
      not_found      = 1
      internal_error = 2
      others         = 3.
if sy-subrc <> 0.
    message text-005 type 'E' .
endif.
Loop <table_field> assignigng <field>
*---here you have to collect the relevant information that you are going to display in your output.
Endloop.
Use any one of ALV or OOALV and display your records.
Regards,
Peranandam

TABLE-FIELD NAME FOR AGENT (SALES ORDER)

HI
I am making despatch report agent wise .
Can any one tell me the table-field name for agent it is used in saleorder
t.code va01 .
Regards
Rakesh Kumar Singh

Whereever you can see that Input Field for Agent..Click F1, click Technical Information..You can see the Table and Data Element and Field Name..
Incase it is a structure, click on the data element..click Where Used List..You will get a list of tables.

Authorization object to display table field names in english text in SE17

Hi,
One of users have issues with the filed name getting displayed in technical format instead of english text while browsing table information in SE17. Normally we can set this in through Settings->User Parameters. But here for this user, user parameter option is greyed out and he doesn't have access to SE16.
Is there any other way to change user specific parameters, instead of granting him accesss to SE16 or enabling user parameters in SE17?
Thanks,
Mano

Hi,
I made him run SU53 on SE17 transaction the log is showing that authorization check failed for S_ALV_LAYO with value 23.
Actually i have access SE16 and for me also, user parameter option is greyed out in SE17. I ran SU53 on SE17 in my session i also got same log.
One more observation is, the user's colleague also doesn't have access to SE16 and user parameter option is greyed out in SE17 but he can view the table field names in english. So we are wondering if some authorization object is missing here.
We do not want user to make any changes through GUI.
Thanks,
Mano.

Table field name

Hi
Good afternoon to all ,
can any one tell me the table fields name for
1. bill amount : ?
2. tds : ?
3>passed amount : ?
transaction use is mir7 .
Regards
Rakesh kumar singh

Use transaction ST05 and run an SQL trace when running this transaction.
It is what I would do if I needed to know this information, instead of coming on here and getting someone else to tell me.

How to get the database table field names from program

Hi,
Can any one tell me,whether any function module is there which can get the table field name and its details ,when we pass database table name to it.
Thanks in Advance
<REMOVED BY MODERATOR>
Regards
Shibin
Edited by: Alvaro Tejada Galindo on Feb 14, 2008 12:41 PM

Hi,
DD02L Table contains the SAP Tables.
DD02T Table contains the SAP Table Texts.
DD01L Table contains the Domains
DD01T Table contains the Domain Texts.
DD03L Table contains the Table Fields.
DD03T Table contains the Table Field Texts. (Language Dependent)
DD04L Table contains the Data Elements.
DD04T Table contains the Data Element Texts.
DD05s Table contains the Foreign Key Fields
last words with L and T only. L->Database Fetch T-> Text
For ur question use table DD03L or DD03T.
Regards,
Chandru

Table & field name related to credit

Hi experts,
Are the tables/field names below are correct?
If yes, what reasons would be for the field of sales value shows zero in SE16 while the field shows correct amount in FD33?
If not, pls provide the correct table & field name for credit exposure & sales value. Thx.
Table KNKK - SKFOR = credit exposure
Table KNKK - SAUFT = Sales value.

Hi
You are looking the right table
However field KNKK - SAUFT = Sales value, displays the Total of all order values which have not been transferred to FI, but which are taken into consideration when checking the credit limit.
You can check following fields
Table KNKK - KLIMK = Credit LIMIT
Table KNKK - SKFOR = Credit Exposure (i.e Total Receivables)
Check for the values appearing against Receivables field (skfor) on the customer credit management : status page (FD33).
Regards
Tejpal

What balance value in sales order and iwant to know table field name in

where the balance value come in sales order i want make sales order report in which i want to add this filed how we add it and tell me table field name of balance vlue and how we give it in FS please help me in this my report are left without it please give me solution

Hello
where the balance value come in sales order
Please note that when you raise your question at SDN forum, your question needs to be clear...
What do you mean by BALANCE VALUE ????
Regards,
Sarthak

I want the table fields name for the screen fields of transactions lm59

Hi all
I am enhancing transactions LM58,LM59and LM 60
But in that transactions underthe lable of storage bin , there are 3 input fields . I want to know the exact table fields for those 3 input screen fields .

Ravi,
OK.
You can look to tables EKPO, EKKO for PO-related fields.
Look to SE84 under ABAP Dictionary > Fields > Table Fields - This is search tool for existing names. Or can create custom Y- and Z- fields, data elements, domains to meet your needs.
Please reward points.

What is table field name for order status report of rate per unit and bal

hi i want to make FS for order status report i almost get all table and field but i don't get only two field rate per unit and balance value table field didn't get please help me searching in field and table
i want to develop my status report

Hi,
Check tables VBAK and VBAP wherein you will get all header and item details.
VBUK and VBUP for header and line item statuses.
KONV would give you rates/pricing details for each condition type determines in the sales order.
VBAK-KNUMV = KONV-KNUMV is how you relate both of them.
Hope that helps.
Regards,
Amit

Using table field name as a variable

Hi ,
Is it possible to map some values to a field in a Ztable , if I have the field name of the Ztable in a variable.
For ex:
I have a ZTABLE -- which has some fields - ZF1 and ZF2.
In my code, I determine the field in which I want to put data at runtime. For ex, in my code i determine at runtime I want to update field ZF2 , but I have this field name in a variable <V_FIELDNAME>
So, Is it possible to do something as:
<V_FIELDNAME> = ZF2.
ZTABLE-<V_FIELDNAME> = <VARIABLE -SOME VALUE>.
and this value should actually maps to ZTABLE-ZF2.
If it is possible , how to do it ?
Thanks-

Hi Tamas,
Thanks a lot for ur post ! it did certainly help. However, I need some more help.
Here is what I need -
I will have a string coming up from an interface which would be something like : Val1;Val2;Val3
And in SAP R/3 I have a variable maintained as : Field1;Field2;Field3
Field1 Field2 and Field3 are fields of a ZTABLE.
So , at runtime, using the variable I have to determine which Value goes to which field and then insert this field in ZTABLE.
So, ultimately , code should perform the following actions:
ZTABLE-FIELD1 = Val1
ZTABLE-FIELD2 = Val2
ZTABLE-FIELD3 = Val3
Insert ZTABLE.
Going by code you provided, I can assign individual values, But then ultimately I need to map it to a structure which can be used to insert in a DB table. How can I do this?
Thanks-

Wanted Table & Field Names.

hi All,
i am preparing a ageing report, my requirement is to get the
amount as
total outstanding as on date and
toal outstanding as on due date.
please tell me the table and field names and also based on what field i need to get the amout to these fields.
thanks,
srikanth.

Hi Srikanth,
This info is available on standard SAP reports. If you are the developer (as your name suggests), then I would go back to your business / functional analyst and ask them to prepare a proper spec for you if they don't feel that the standard reports fit their needs.
Regards,
Tony

Re: Table & Field Name

Dear All,
Pls suggest a table name & field name to find out customer debit balance
Awaiting for ur valuable inputs.
Regards
Pavani

There is only one table that will give you this.
it is KNC1.
It give you the total debits, credits and balance per customer per period.
Please award points if this is useful.

Required ATP Table field name

Hello Gurus,
As per my client requirement, durig the time of internet sales, The customer (user) while ordering for a material there should be a field where in customer can view the available quantity for that particular material.
I ve checked in MD04 and i got the structure MDEZ [field MNG04]. But i want to know whether i can fetch data from this field or is there any other table/field where i can get the GATP quantities for the particular material. Anybody please provide the exact Table and field name.......
Thanks in advance....
Edited by: Praveen on Jan 7, 2009 5:59 AM
Edited by: Praveen on Jan 7, 2009 9:35 AM
Edited by: Praveen on Jan 7, 2009 9:52 AM

Dear Praveen
In Table MDTB, you can see fields like
- MNG01:::Recd / Req.quantity
- MNG02:::Scrap
- MNG03:::Shortage Quantity
You can make use of these fields according to your requirement.
thanks
G. Lakshmipathi

Table& field names for position name(employee) in HR-ABAP

Similar Messages

Maybe you are looking for