Table fields 2LIS extractors

Hi all,
In the extractor pool of the 2lis_08TRFKZ and 2lis_08TRTLP we have a field "CMFRE" that comes from strucutre VTRLK.
Does anyone know in which table this field is stored?
How can I check this?
Regards,
Dwain

Hi Dwain,
In your case, if you look closely you can find the table name in the structure itself.
In the structure VTRLK, there is a include of table LIKP. And this field exists in this include structure. So it is clear that this field is stored and extracted from table LIKP.
Thanks
Amit

Similar Messages

How to get data from COSP table, field HRKFT as the key to data from PM?

Dear ladies and gentlemen!
I need to get data from COSP table, field HRKFT as the key to data from PM tables (AFKO and AUFK).
The problem is that it is a key field to the COSP, and all non-key fields as an alternative to HRKFT are not suitable for this task.
All this is necessary for the extractor, which loads the data from the R \ 3 systems in the BW-system. I need to perform SELECT from a table COSP and maybe also JOIN, most likely between tables COSP and AUFK.
What should I do in this case?
Thank you very much in advance!

From information on help.sap.com I've made a conclusion that one of possible solutions in theory is to modify standard extractor PM_OM_OPA_1 in order to make HRKFT field available for work, because by default it is hidden by SAP and not available for use as a key field.
Of course, it's not a very good solution, but for now I know no other way to solve this problem.
Maybe someone knows better ways? In this case I will be very grateful for any help!
Moderator: You'd better post it on BI forums

How to know the corresponding Table-fields in R/3 for fields in BW

Hi,
We need to enhance the extractor for 0CUSTOMER_ATTR. We have added some new attributes in 0CUSTOMER in BW and we want to know the corresponding Table-Fields in R/3 from where we can populate the values.
The list of fields in BW is as follws. All are 0CUSTOMER attributes.
I am searching on the internet. If you know any link/place where I can find the corresponding fields, please let me know.
0AF_CUSTDC
0AF_CUSTID
0CITY_2
0DB87SIC1
0DBANSALES
0DBAREACOD
0DBCTRYCOD
0DBCTYNAM
0DBCUSTAT
0DBDISTRCOD
0DBEMPBND
0DBEMPTOT
0DBGUDUNS
0DBHQDUNS
0DBBLGLSTAT
0DBLOCACOD
0DBREGCOD
0DBSALBND
0DBSECTCOD
0DBYRSBND
0DBYRSTD
0DB_MAKTCOD
0DB_MATCDS
0FAX_NUM
0ID_TXNUMB3
0ID_XCPD
0LANGU
0POBOX_LOC
0SORTL
0TAX_NUMB2
0DBTRDSTYL
0DBADDRES1
0DBADDRES2
0DBCTRYNA
0DBSTPRCOD
0DBPOSTCOD
0DBNATID
0DBNATIDCO
0DBTELPHON
0DBCEONAME
0DBLNOFBUS
0DBANSLUS
0DBCURNCCO
0DBEMPHERE
0DBSUBCODE
0DBHQNAME
0DBHQCTYNM
0DBHQSTPR
0DBHQCTRYN
0DBULDUNS
0DBULNAME
0DBULCTYNM
0DBGUCTRYN
0DBGUCTRYC
0DBGUNAME
0DBNUMFAM
0DBHIERCO
0DBFAMUPDT
0DBBUSNAME
0DB_MATCH
Thanks,
Naveen Choudhary

Naveen,
Check http://help.sap.com/search/highlightContent.jsp
Also see Re: 0customer_attr enhancement
If the source fields in R/3 are standard, you should be able to find the mapping in the help documentation. If its extension field, then you got to see which extractor (based on the base table extension) suits the best and extend it accordingly else create a new generic extractor.
Hope it helps

How to check which Table & Field is populating Data source

Hi,
My requirment is to check from which Table and Which field the data is extracted in the data source
Data Source : 0MAT_PLANT_ATTR
Field in Data Source : MINBE
Now i want to check from where (Table/Field) in R/3 is populating the Field MINBE in Data source 0MAT_PLANT_ATTR
How can i do that

Hi,
Since you have the extract structure and the extractor, you can try Extractor Checker RSA3.Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Hope this helps.
Thanks,
JituK

Table fields(R/3) move to sap bw

Table fields are avaialble in R/3 side.i have to use those fields in BW SIDE.
can any one tell me How to use those felds in bw side. and which extractors will I use?
Please explain me whole way.

Hi,
Table fields are avaialble in R/3 side.i have to use those fields in BW SIDE. can any one tell me How to use those felds in bw side. and which extractors will I use?
Steps:
1. Create a DataSource in ECC using RSO2 and select table and give the table.
2. Save and Activate the DataSource.
3. Then Replicate the DataSurce in BW.
4. Create mapping susing Transformations in BW i.e InfoObejct and Fields mapping.
5. Create Cube/DSO and tyhen connect it to DataSource Via InfoSource.
6. Create InfoPackage and Extarct the Data till PSA using InfoPackage
7. Create DTP and then exeucte it to load data from PSA to Cube/DSO.
Thanks
Reddy

Unable to access the data and table fields from handheld

Hi,
I've created a Testing.sdf file on the local pc using SQL Server Management Studio, creating table, fields and insert some data. in local pc i can access the the data as normal. the problem is after i moved the file to handheld device i
cannot access the data within the table, it shown error 'Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)' . I tried to google it, but still got no solution.
Thanks,

'Name Space
Imports System.Data.SqlServerCe
'String Connection
'Data Source = D:\SKUDWN3 .sdf'
Public Sub CreateDB(ByVal StrConn As String)
        'Declaration
        Dim cn As SqlCeConnection = Nothing
        Dim cm As SqlCeCommand = Nothing
        Dim SQLEngine As SqlCeEngine = Nothing
        Dim rs As SqlCeResultSet = Nothing
        Dim rec As SqlServerCe.SqlCeUpdatableRecord = Nothing
        'Tables -
        Const TB_SKUDWN3 As String = "SKUDWN3"
        'Fields TB_SKUDWN3
        Const FL_SKUDWN3_UPC As String = "UPC"
        Const FL_SKUDWN3_SKU As String = "SKU"
        Const FL_SKUDWN3_LD As String = "LD"
        Const FL_SKUDWN3_SD As String = "SD"
        Const FL_SKUDWN3_AN As String = "AN"
        Const FL_SKUDWN3_Price As String = "Price"
        Const FL_SKUDWN3_GST_FLAG As String = "GSTFLAG"
        'Create Database
        SQLEngine = New SqlCeEngine(StrConn)
        SQLEngine.CreateDatabase()
        SQLEngine.Dispose()
        'Open Connection
        If IsNothing(cn) Then cn = New SqlCeConnection(StrConn)
        If cn.State = Data.ConnectionState.Closed Then cn.Open()
        cm = cn.CreateCommand
        'Create Table, Fields
        cm.CommandText = "CREATE TABLE " & TB_SKUDWN3 & " (" & FL_SKUDWN3_UPC & " NVARCHAR (13)," & _
            " " & FL_SKUDWN3_SKU & " NVARCHAR (9), " & FL_SKUDWN3_LD & " NVARCHAR(30)," & _
            " " & FL_SKUDWN3_SD & " NVARCHAR (18), " & FL_SKUDWN3_AN & " NVARCHAR(15), " & _
            " " & FL_SKUDWN3_Price & " NVARCHAR (10), " & FL_SKUDWN3_GST_FLAG & " BIT)"
        cm.ExecuteNonQuery()
        'Close Connection
        cm = Nothing
        If Not IsNothing(cn) Then
            If cn.State = ConnectionState.Open Then cn.Close()
            cn.Close()
            cn.Dispose()
        End If
    End Sub
'The DB was successfully created, but after moving to Handheld the fields of table can't be accessed

How do I write a select statement to see if table field is in variable list

I was wondering if someone knew the best way to write a query to pull back rows where a table field is found in a a variable string. I'm using Cold Fusion 10 on Microsoft SQL Server.
The table has a series of fields such as
carcode          carname
G                Garage
C                Carport
A               Attached
D               Detached
And another query pulls back a field that stores as text all the abbreviations that apply
I want to pull back all the carnames that would match the abbreviations stored in that field. I thought I could use a contains line but that does not work. How do I pull back matches against a variable string... I tried an IN statment but that didn't work.
CFQUERY...
Select carname from CarTable WHERE CONTAINS (carcode, '#query.carlist#') does not work.
   select carname from CarTable WHERE CONTAINS(carcode, 'G,A')
I'm stumped. The list of abbreviations could be very LOOOONG or short and I just need to translate those abbreviations into the full names by grabbing it from another table. It isn't just one abbreviation so I can't use LIKE in the one to one sense.
Thank you so much.

If you have records with these values,
G,A
0
then your first mistake is that you designed your database poorly. Storing lists in a single field is essentially stroring unuseable data. A one to many relationship is better. If you don't know what that is, I've heard good things about the book, Database Design for Mere Mortals.
Next, this syntax, #queryname.car_storage#, only returns the first record. To get all the records, use the valuelist function.
Next, in sql, if you have a list of strings, each one has to be quoted. Something like this.
where myfield in ('a', 'b', 'c')
The best way to achieve this in ColdFusion is to use the cfqueryparam tag with the list attribute set to yes.

Which table field I can confirm if the PO has done invoice receipt

Hi,
From which table field, I can confirm the PO has done invoice receipt. and in case of that with reference a PO, I have done the IR, but it was reversed, which means PO has not done invoice receipt.
For this case, I don't want to read table EKBE to retrieve the invoice number, the read table RBKP to judge if there is a reverse IR for it.
If there any status table field which indicate if the PO has done invoice receipt.
Many thanks,
Aries

Hi Raj,
For invoice receipt and credit memo, EKBE-BEWTP is all set with 'Q', so if there is reversed invoice. Also you can retrieve data from EKBE. But actually the PO also needs a invoice receipt. So it can not meets the requirement.
Regards,
Aries

How to Track the changes made to the custom table field value

I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
Kranti

Hi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan

F110 - Grouping the vendor invoices by BSEG table fields

Hi,
I want to group the vendor invoices while making the payment through F110, based on a BSEG table field. The settings in Grouping Key configuration (OBAP) only allows me to choose the fileds from BSIK table and not possible to select the fields from BSEG table. Is there any other way to group the vendor invoices based on BSEG fileds? How can we achieve this requirement in SAP?
Thanks and Regards
Koteswararao padarti

Hi,
I created the substitution and also grouping key based on the BSIK-KIDNO filed. But the system is not able to group the vendor invoices by payment reference. I already tried the following options
Seperate Payments for each Ref in FBZP settings
Can anyone let me know what is missing in the configuration to group the invoices for payment by payment reference.
Regards
Koteswararao Padarti

How to show all table fields in correct alv disply

Hi all,
This is my report that disply in ALV . but this is only displying the join table (t_p0001_p0002) fields.i want to disply the other two table fields i.e t_pa0315 and t_pa0007.what is the logic to ALV disply the other two table fields like the table t_pa0001_pa0002.pls help me regarding this.
send me the code its urgent.
thanks!
Vipin
pls find the code below:->
REPORT Y_WP03 .
DEFINE m_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname   = &1.
ls_fieldcat-ref_tabname = &2.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
TYPE-POOLS: slis.                      " ALV Global types
tables:pa0001,
       pa0315,
       pa0007,
       disvariant.
     Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
*SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_pernr FOR pa0001-pernr.            " Personnel No
SELECT-OPTIONS: s_orgeh FOR pa0001-orgeh .           " Organization unit
SELECT-OPTIONS: s_werks FOR pa0001-werks.            " Personnel Area
SELECT-OPTIONS: s_plans FOR pa0001-plans.            " Position
SELECT-OPTIONS: s_ebeln FOR pa0315-ebeln.            " Purchase order
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK b2k2 WITH FRAME TITLE text-002.
*SELECT-OPTIONS: s_var FOR disvariant-variant.
PARAMETERS: p_disva1 LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b2k2.
                 Type Definition                                     *
TYPES :
BEGIN OF ty_pa0001_pa0002,
    pernr TYPE pa0001-pernr , " Personnel no.
    endda TYPE pa0001-endda , " end date
    begda TYPE pa0001-begda , " start date
    bukrs TYPE pa0001-bukrs , " company code
    werks TYPE pa0001-werks , " Personnnel area
    persg TYPE pa0001-persg , " Employee group
    persk TYPE pa0001-persk , " Employee subgroup
    btrtl TYPE pa0001-btrtl , " Personnnel subarea
    abkrs TYPE pa0001-abkrs , " Payroll area
    kostl TYPE pa0001-kostl , " cost center
    orgeh TYPE pa0001-orgeh , " Organizational Unit
    plans TYPE pa0001-plans , " Position
    nachn TYPE pa0002-nachn , " Last name
    vorna TYPE pa0002-vorna , " First name
    midnm TYPE pa0002-midnm , " Middle name
END   OF ty_pa0001_pa0002 ,
BEGIN OF ty_pa0315,
   pernr TYPE pa0315-pernr , " Personnel no.
   kostl TYPE pa0315-kostl , " Sending cost center
   lstar TYPE pa0315-lstar , " Activity type
   werks TYPE pa0315-werks , " Plant
   lifnr TYPE pa0315-lifnr , " Vendor number
   ebeln TYPE pa0315-ebeln , " Sending pruchase ord
   ebelp TYPE pa0315-ebelp , " Sending PO item
   lstnr TYPE pa0315-lstnr , " Activity number
END   OF ty_pa0315,
BEGIN OF ty_pa0007,
pernr TYPE pa0007-pernr,
schkz TYPE pa0007-schkz,
END OF ty_pa0007.
*BEGIN OF ty_pa0002,
pernr TYPE pa0002-pernr,
nachn TYPE pa0002-nachn,
vorna TYPE pa0002-vorna,
midnm TYPE pa0002-midnm,
*END OF ty_pa0002.
                 Data Declaration                                    *
DATA :
t_pa0001_pa0002 TYPE STANDARD TABLE OF ty_pa0001_pa0002 ,
w_pa0001_pa0002 TYPE ty_pa0001_pa0002 ,
t_pa0315 TYPE STANDARD TABLE OF ty_pa0315 ,
w_pa0315 TYPE ty_pa0315 ,
t_pa0007 TYPE STANDARD TABLE OF ty_pa0007 ,
w_pa0007 TYPE ty_pa0007 .
t_pa0002 TYPE STANDARD TABLE OF ty_pa0002 ,
w_pa0002 TYPE ty_pa0002 .
START-OF-SELECTION .
SELECT a~pernr
         a~endda
         a~begda
         a~bukrs
         a~werks
         a~persg
         a~persk
         a~btrtl
         a~abkrs
         a~kostl
         a~orgeh
         a~plans
         b~nachn
         b~vorna
         b~midnm
         INTO TABLE t_pa0001_pa0002
         FROM pa0001 AS a INNER JOIN pa0002 AS b
         ON apernr = bpernr
         WHERE a~pernr IN s_pernr
         AND   a~werks IN s_werks
         AND   a~orgeh IN s_orgeh
         AND   a~plans IN s_plans.
SORT t_pa0001_pa0002 BY pernr .
IF NOT t_pa0001_pa0002[] IS INITIAL .
    SELECT pernr
           kostl
           lstar
           werks
           lifnr
           ebeln
           ebelp
           lstnr
           FROM pa0315
           INTO TABLE t_pa0315
           FOR ALL ENTRIES IN t_pa0001_pa0002
           WHERE pernr = t_pa0001_pa0002-pernr
           AND   kostl = t_pa0001_pa0002-kostl
           AND   ebeln IN s_ebeln.
    SELECT pernr
           schkz
           FROM pa0007
           INTO TABLE t_pa0007
           FOR ALL ENTRIES IN t_pa0001_pa0002
           WHERE pernr = t_pa0001_pa0002-pernr.
    SELECT pernr
           nachn
           vorna
           midnm
           FROM pa0002
           INTO TABLE t_pa0002
           FOR ALL ENTRIES IN t_pa0001
           WHERE pernr = t_pa0001-pernr .
ENDIF.
PERFORM f_display_data.
FORM f_display_data.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv.
Build the field catalog
m_fieldcat 'PERNR' 'PA0001'.
m_fieldcat 'NACHN' 'PA0002'.
m_fieldcat 'VORNA' 'PA0002'.
m_fieldcat 'MIDNM' 'PA0002'.
m_fieldcat 'BUKRS' 'PA0001'.
m_fieldcat 'WERKS' 'PA0001'.
m_fieldcat 'PERSG' 'PA0001'.
m_fieldcat 'PERSK' 'PA0001'.
m_fieldcat 'BTRTL' 'PA0001'.
m_fieldcat 'ABKRS' 'PA0001'.
m_fieldcat 'ORGEH' 'PA0001'.
m_fieldcat 'PLANS' 'PA0001'.
m_fieldcat 'SCHKZ' 'PA0007'.
m_fieldcat 'KOSTL' 'PA0315'.
m_fieldcat 'LSTAR' 'PA0315'.
m_fieldcat 'WERKS' 'PA0315'.
m_fieldcat 'LIFNR' 'PA0315'.
m_fieldcat 'EBELN' 'PA0315'.
m_fieldcat 'EBELP' 'PA0315'.
m_fieldcat 'LSTNR' 'PA0315'.
m_fieldcat 'BEGDA' 'PA0001'.
m_fieldcat 'ENDDA' 'PA0001'.
Display the list
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = sy-cprog
      i_callback_user_command = 'USER_COMMAND'
      it_fieldcat             = lt_fieldcat
    TABLES
      t_outtab                = t_pa0001_pa0002.
ENDFORM.                               " F_DISPLAY_DATA_VBAK
      FORM USER_COMMAND                                             *
FORM user_command USING u_ucomm     TYPE syucomm
                        us_selfield TYPE slis_selfield.     "#EC CALLED
CASE u_ucomm.
    WHEN '&IC1'.
      READ TABLE t_pa0001_pa0002 INDEX us_selfield-tabindex INTO
w_pa0001_pa0002.
      CHECK sy-subrc EQ 0.
ENDCASE.
ENDFORM.                               " USER_COMMAND

Hey,
Look at ur code.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = lt_fieldcat
TABLES
t_outtab = <b>t_pa0001_pa0002</b>.
Here you're passing only the join table t_pa0001_pa0002. If you want to display the other tables as well, then u must have an internal table that has the columns of all the 3 tables. Then u need to buil;d the fieldcatalog accordingly and then display that table,
Cheers,
Sam

Passing a table-field value in Crystal to a Store Procedure in SQL Server

I have been checking all over the interenet via searches and although some seem to come close to this, its still not what I want.
Essentially I need to pass value from Table-Field record (for each record read/selected) via a paramete to a Stored Procedure(SP) in SQL Server 2205/2008. I do NOT want to be prompted for a value for this parameter each time the report is run, simple pass the value in which will be used along with other select criteria to bring back one value for the report to use in a calcuation per record.
The value of the parameter is a date, but I understand it would be better to pass it in as a varchar(8) - 'YYYYMMDD' - and then reconvert it inside the SP, as follows:
In Crystal Reports 2008 SP3, I have a formula defined as,
trans_date = ToText ({F1ARS_STMT_WS_TRAN.TRANS_DATEI}, 'YYYYMMDD')
and essential just want to pass this to the SP below ... i.e. trans_date ---> @strTransDate
I then link the key fields [EXCH_RATE_TABLE_NAME] and [TRANS_CCY_CODE] to other tables in the Database Expert, and put [EXCH_RATE_AMT] on the report and use it to calculate what I want.
This works fine when the prompt comes up and I put in a proper date, but I don't what it to prompt, but simple pass the F1ARS_STMT_WS_TRAN.TRANS_DATEI in via the fornula/parameter and let teh SQL do the rest for each record selected..
CREATE PROCEDURE [dbo].sp_GET_EXCH_RATE_AMT (@strTransDate varchar(8))     --use format 'YYYYMMDD' to represent the date as a string.
     -- Add the parameters for the stored procedure here
     -- @TransDate datetime = now
AS
     declare @TransDate datetime
     set @TransDate = CONVERT(DATETIME, @strTransDate, 112)
BEGIN
     -- SET NOCOUNT ON added to prevent extra result sets from
     -- interfering with SELECT statements.
     SET NOCOUNT ON;
    -- Insert statements for procedure here
SELECT [EXCH_RATE_TABLE_NAME], [TRANS_CCY_CODE], [EXCH_RATE_AMT]
FROM [F1CCY_EXCH_RATE]
WHERE [MAJOR_CCY_CODE] = 'BBD'
AND   [START_DATEI] =
     SELECT MAX([START_DATEI])
     FROM [F1CCY_EXCH_RATE]
     WHERE [MAJOR_CCY_CODE] = 'BBD'
     AND   [START_DATEI] <= @TransDate
END
GO
GRANT EXECUTE ON sp_GET_EXCH_RATE_AMT TO PUBLIC
GO
Thanks for any help. Can't tell the headache this has caused my both literally and figuratively.

Hello,
I moved your post to the Report Design forum. Lots of SQL help in here...
I believe the problem is due to you using a Parameterized Stored Procedure. The first thing CR has to do is connect to your DB source which requires the date parameter before it can run the query to add the date filter, it's the SP that is prompting for the parameter. Therefore the report has not run so it can't get the field value from the report until you fill in the info for the SP. Catch 22 problem.... Which came first, the Chicken or the Parameter....
The report will work as you have noted but I don't know of anyway to refresh unless parameter is filled in again....
Jason has a lot of great solutions when it comes to these dilemmas, Possibly using a Command Object may help but I believe you will still run into the same issue....
Only way I can think of is to not use a parameter in the SP and let CR do the filtering client side. Of course this means all data is coming back to the client PC as you are likely trying to find a work around for.
Thank you
Don

What is table field name for order status report of rate per unit and bal

hi i want to make FS for order status report i almost get all table and field but i don't get only two field rate per unit and balance value table field didn't get please help me searching in field and table
i want to develop my status report

Hi,
Check tables VBAK and VBAP wherein you will get all header and item details.
VBUK and VBUP for header and line item statuses.
KONV would give you rates/pricing details for each condition type determines in the sales order.
VBAK-KNUMV = KONV-KNUMV is how you relate both of them.
Hope that helps.
Regards,
Amit

Table field and structure field

Hi ,
I am working on an user exit.
I have to update a field on the transaction screen DFBATCH-MHD_IO (DFBATCH is a struture).
Now the same field is defined in table MARA-VFDAT (MARA is a table).
Now in the user exit function module I have written a code which will update the table field MARA-VFDAT.
So will the structure field also gets updated automatically since that structure field is same as the table field (only name is different) or I have to explicitly equate table field to structure field.
Raghu.

How do you know that DFBATCH-MHD_IO is tied to MARA-VFDAT. Is there a line of code in the transaction like this.
MARA-VFDAT = DFBATCH-MHD_IO.
or
DFBATCH-MHD_IO = MARA-VFDAT.
If you are updating MARA-VFDAT from your userexit, and the existing code in the transaction is filling the DFBATCH-MHD_IO from MARA-VFDAT, then no you shouldn't need to fill it.
Regards,
Rich Heilman

Connection between Structure Field and Table Field

Hello everybody,
I'm trying to find a connection between a field in the structure and the actual filed in the table of the database. For example in the structure CAUFVD you have the field PLNNR. This information is stored in the table AFFL in the field PLNNR.
In the transaction SE84 you can display a structure with all it's fields but I don't see anywhere from which table and field the information is gathered.
Can you please help me in finding the connection between the structure field and the table field in the database in which the displayed information is stored?
Thanks and best regards,
CALIN Marius-Bogdan
SAP - PP-KeyUser

Double-click on the structure field and you can do a where-used to find the codepoints, interface usage, etc. You might find it that way. You could also look at the flow logic of your screen and try to trace it back. Otherwise, you'd have to use watchpoints, the debugger, runtime analysis or various other developer tools to find the data population. If you are a user and not a developer as your signature indicates, you might need to find a developer for this. Sometimes, it can be incredibly frustrating with SAP because the data field will be handed off 4 or 5 times before it actually reaches its destination field. Unfortunately, I haven't worked with PP in at least 10 years so I can't give you a better answer; maybe someone else can.

Table fields 2LIS extractors

Similar Messages

Maybe you are looking for