Table for ABAP programs

Hi ,
Is there some table where I can find the list of ABAP programs?
Thanks
FedeX

please visit this this will be use ful to u
http://www.sap-img.com/abap.htm

Similar Messages

Synchronizing Two Custom Z Tables Using Abap Program

Hi,
    My requirement is Synchronizing two custom z tables using abap program me.
I have vendors in two tables, i have to select the common vendors from first which are existing in second table also.
In first table each vendor can have more than one supplier types in one field only. In second table these supplier types are divided into
different fields.
     My requirement is I have to check supplier types in first table and i have to pass X to corresponding supplier types in second table vendor.
I have to pass X value for each depending in Second table depending upon supplier type in first table.
. How to do it can any one suggest with code.
Thanks in Advance,
Vivek
<subject edited by moderator>
Message was edited by: Manish Kumar

Hi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
     extract the vendor types in to itab Table1New.
     Select the vendor & types from Table2 by using the for all entries option (better performance).
     loop at Table1New
          check in Table2:
               if the unique key is vendor no: check all fields for the vendor type from Table1New
               if the unique key combo is vendor no & type: check by using a read table.
          If not found => add entry to Table2
     endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou

Access table using ABAP program in other database

Dear SAP Expert,
We have requirement that related to SAP interface.
Our SAP system run on Oracle database 11g (Unix).
Illustration: SAP system = A non SAP system = B
We need to access a table using ABAP program (from SAP system A) in other database (system B) that are not necessarily SAP database. The non-SAP system using SQL Server 2008 (Windows).
What is the best practice for this interface
Do we need database link? If yes, please help to inform me the details step to configure it.
Thanks and Regards

Hi Friend,
You try using an intermediate system..passing your input required to fetch the data..and PI should call the respective query to retrive record..once the full flow is completed you should get the return through some table in the calling program.
else.
ask the other system guy to write a function with select query and ask him to expose as RFC and that RFC we have to call it as RFC in our program to get the required values and only thing we need here is a proper connector in place.
Regards
S.Janagar

Read DB2 tables from ABAP program

Hi All,
I have a requirement to read a DB2 table(in our landscape) from the ABAP program. I appreciate any pointers.
Thanks,
Kiran.

Connecting to an External database from SAP
Step 1: Create an entry for the External database in DBCON table using Trxn: DBCA.
Table: DBCON (Description of Database Connections)
Field Name Description Value (For: E.g.:)
CON_NAME Logical name for a database RAJ
DBMS Database system MSS
USER_NAME Database user <username>
PASSWORD Password for setting up the connection to the database <pwd>/<pwd>
CON_ENV Database-specific information for a database connection MSSQL_SERVER=depotserver MSSQL_DBNAME=HOF_INDORE
DB_RECO Availability type for an open database connect
Step 2: Now you can write code to connect to the external database
Your Sample code can be something like this
FUNCTION-POOL z_houston. "MESSAGE-ID ..
DATA: BEGIN OF wa,
c_locid(3),
c_locname(50),
c_locstate(5),
END OF wa.
FUNCTION z_houston_connect.
""Local interface:
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
loc_id,
loc_name,
loc_state
from ho_loc_mast
ENDEXEC.
DO.
EXEC SQL.
FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_locstate
ENDEXEC.
IF sy-subrc = 0.
PERFORM loop_output.
ELSE.
EXIT.
ENDIF.
ENDDO.
EXEC SQL.
CLOSE C1
ENDEXEC.
ENDFUNCTION.
*& Form LOOP_OUTPUT
Output
FORM loop_output .
WRITE: /5 wa-c_locid, 10 wa-c_locname, 65 wa-c_locstate.
CLEAR wa.
ENDFORM. " LOOP_OUTPUT

TCode for abap program performance testing

Hi
I have tuned a abap program which was consuming lot of time. I still have the old version with diff name. I would like to know the tcodes where in i could see the performance of the program.
regards
Balaji

Hi balaji,
This is kiran Kumar.G.I will give some steps.you better to follow those steps to get ur report performance.
If u r satisfy with my answer give me REWARD POINTS.
            HAVE A NICE DAY.
STEPS:
1.OPEN UR REPORT IN SE38 TRANSACTION.
2.SELECT THE MENU PATH
UTILITIES-->MORE UTILITIES-->RUNTIME ANALYSIS
3.SELECT THE PROGRAM RADIO BUTTON AND GIVE UR REPORT NAME THERE.AND CLICK <b>EXECUTE</b> BUTTON
4.IT WILL TAKE U TO ANOTHER SCREEN THERE U CAN EXECUTE UR REPORT AND COME BACK.
5.CLICK ON ANALYZE BUTTON.(PRESENT IN BELOW OF THE SCREEN).
THEN U WILL GET ONE GRAPH
NOTE:
1.IF IT IS RED UR PROGRAM IS HAVING VERY POOR PERFORMANCE
2.IF IT IS GREEN IT IS OK.
ABAP GRAPH : TELLS UR CODING IN THE REPORT.
DATABASE GRAPH : U R RETREIVE DATA FROM DATABASE IN UR REPORT..
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1.     Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2.     Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3.     Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4.     Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5.     Avoid using nested SELECT statement, SELECT within LOOPs.
6.     Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7.     Avoid using SELECT * and Select only the required fields from the table.
8.     Avoid nested loops when working with large internal tables.
9.     Use assign instead of into in LOOPs for table types with large work areas
10.     When in doubt call transaction SE30 and use the examples and check your code
11.     Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12.     Use "CHECK" instead of IF/ENDIF whenever possible.
13.     Use "CASE" instead of IF/ENDIF whenever possible.
14.     Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING", creates more coding but is more effcient.
Regards,
Kiran Kumar.G

Import issue for ABAP program in Production Server ?

Hi Experts,
I have an ABAP program which gets executed properly in BW Development server but getting the following error when I am trying to execute it in the BW Production while I could activate the program successfully.
Kindly help me to resolve this issue.
Thanks in advance !!!
Regards,
Gokulkumar RD

Hi Golkul,
Can you debug the program while execute?
I think there is some hardcoding in the program for checkiing the client and then raised a custom message in the program.
Can you share the coding of the prorgam if possible?
Try to check for any messages raised in the program. Also click on the on the message pop up and see the details on the message and let us know.
Thanks
Amit

How do i create a header template for ABAP programs?

Hi all.
Need a little bit of help here. When you create a new program you get a template with space for comments at the top of the program and basic stuff. If I want to change this template to add areas that we want to have comments on for every program we make at work. How do I do that?
Instead of :
I want to have in a way similar to this:
*     Author:                         *
*     Function:                    *
And so on
I want the words to be there when our developers creates the program.
How can I do that?
BR
Kalle

After I create a new report program, I delete everything but the REPORT line. I then put this code in for my skeleton.
* Created By:            Walter Industries (Paul Chapman)
* Created On:            02/29/2008
* Tran Code:             ZLMxx
* Program Name:          YPTC_REPORT_SKELETON        " replace New Progam Name herer
* Program Descr:         Configurable Leads Data Query
*                         Modification Log
* Programmer   :Issue:   Date   : Chg Req. : Description
* Paul Chapman :00000:02/29/2008:DEVK000000:New Program
REPORT yptc_report_skeleton MESSAGE-ID zleads_msg.      " replace New Progam Name herer
*_________________________________________________ Tables
TABLES: zpca, cepc, zlmlead.
*_________________________________________________ Constants
CONSTANTS:
line_length      TYPE i VALUE 100,
c_tab            TYPE x VALUE 9,                          " x'09'
c_crlf           TYPE x VALUE 3338. " x'ODOA'
*_________________________________________________ Types
TYPES: BEGIN OF scr_text_line,
         line(line_length) TYPE c,
       END OF scr_text_line.
*_________________________________________________ DATA
DATA:
curr_screen_tab(4) TYPE n.
*_________________________________________________ ALV Area
*_________________________________________________ Ranges
RANGES:
r_branch       FOR zpca-branch.
*_________________________________________________ Selection Screen
SELECTION-SCREEN:
BEGIN OF TABBED BLOCK tabs FOR 36 LINES,
    TAB (20) tab1   USER-COMMAND push1 DEFAULT SCREEN 1010,
    TAB (20) tab2   USER-COMMAND push2 DEFAULT SCREEN 1020,
END OF BLOCK tabs.
* Tab1 Options            S E L E C T I O N    S C R E E N S    Tab 01 *
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECTION-SCREEN: BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:
   sdiv      FOR cepc-prctr MATCHCODE OBJECT zdivjwh,
   ssbrch    FOR zlmlead-branch.
SELECTION-SCREEN: END OF BLOCK blk1.
SELECTION-SCREEN: BEGIN OF BLOCK bl10 WITH FRAME TITLE text-010.
PARAMETERS:
cparm1   AS CHECKBOX USER-COMMAND sel,
cparm2   AS CHECKBOX USER-COMMAND sel,
cparm3   AS CHECKBOX USER-COMMAND sel,
cparm4   AS CHECKBOX USER-COMMAND sel,
cparm5   AS CHECKBOX USER-COMMAND sel.
SELECTION-SCREEN: END OF BLOCK bl10.
SELECTION-SCREEN END OF SCREEN 1010.
* Tab 2 Options            S E L E C T I O N    S C R E E N S   Tab 02 *
SELECTION-SCREEN BEGIN OF SCREEN 1020 AS SUBSCREEN.
SELECTION-SCREEN: BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECT-OPTIONS:
   sctype      FOR zlmlead-ctype,
   sprfcnt     FOR zlmlead-prefcont.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(25)   text-201.
SELECTION-SCREEN POSITION 30.
PARAMETERS: rb_opt1 RADIOBUTTON GROUP gr20.
SELECTION-SCREEN COMMENT 34(03) text-991. " Yes
SELECTION-SCREEN POSITION 40.
PARAMETERS: rb_opt2 RADIOBUTTON GROUP gr20.
SELECTION-SCREEN COMMENT 44(03) text-992. " No
SELECTION-SCREEN POSITION 50.
PARAMETERS: rb_opt3 RADIOBUTTON GROUP gr20.
SELECTION-SCREEN COMMENT 54(06) text-993. " Either
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK blk2.
SELECTION-SCREEN: BEGIN OF BLOCK bl20 WITH FRAME TITLE text-020.
PARAMETERS:
cb_opt1   AS CHECKBOX,
cb_opt2   AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN: END OF BLOCK bl20.
SELECTION-SCREEN END OF SCREEN 1020.
*____________________________________________ Screen Actions
AT SELECTION-SCREEN OUTPUT.
PERFORM what_tab_am_i_on.
CASE curr_screen_tab.
    WHEN '1010'.                                            " Tab 1
    WHEN '1020'.                                            " Tab 2
    WHEN OTHERS.
ENDCASE.
PERFORM tab_hide_unhide.
*___________________________________________ Initialization
INITIALIZATION.
* Tab Text
tab1 = 'Tab 1'.
tab2 = 'Tab 2'.
*_________________________________________________ Load of Program
LOAD-OF-PROGRAM.
*_________________________________________________ Start of Selection
START-OF-SELECTION.
PERFORM set_up_branch_range.
*_________________________________________________ End of Selection
END-OF-SELECTION.
*&      Form what_tab_am_i_on
FORM what_tab_am_i_on.
LOOP AT SCREEN.
    IF     screen-name CS 'BLOCK_1010'.
      curr_screen_tab = '1010'.
    ELSEIF screen-name CS 'BLOCK_1020'.
      curr_screen_tab = '1020'.
    ENDIF.
ENDLOOP.
ENDFORM.                    " what_tab_am_i_on
*&      Form tab_hide_unhide
FORM tab_hide_unhide.
LOOP AT SCREEN.
    CHECK screen-group3 = 'TAB'.
    CASE screen-name.
      WHEN 'TAB1'.
*        IF
*          screen-active = 1.
*          screen-required = 1.
*          screen-input = 1.
*          screen-output = 1.
*          screen-intensified = 1.
*          screen-invisible = 1.
*        ELSE.
*          screen-active = 0.
*          screen-required = 0.
*          screen-input = 0.
*          screen-output = 0.
*          screen-intensified = 0.
*          screen-invisible = 0.
*        ENDIF.
      WHEN 'TAB2'.
*        IF
*          screen-active = 1.
*        ELSE.
*          screen-active = 0.
*        ENDIF.
    ENDCASE.
    MODIFY SCREEN.
ENDLOOP.
ENDFORM.                    " tab_hide_unhide
*&      Form set_up_branch_range
FORM set_up_branch_range.
r_branch[] = ssbrch[].
CHECK NOT sdiv IS INITIAL.
r_branch     = 'IEQ'.
SELECT branch INTO r_branch-low
    FROM zpca
    WHERE region = 'JWHCO'
      AND division IN sdiv.
    APPEND r_branch.
ENDSELECT.
SORT r_branch.
DELETE ADJACENT DUPLICATES FROM r_branch.
ENDFORM.                    " set_up_branch_range

Table for the program code

Hi Freinds,
is there any table to store the program code , i mean whatever we write in SE 38 will it be stores any data base tables? we have one option to get the code that is READ REPORT INTO ITAB. other than this is there any database tables for this?
Regards,
Tirumal.

Hi Reddy,
Table: REPOSRC there is only programm name but not code by using program name you can get code into your report by using Read Report syntax.
Example,
parameters: p_pname type reposrc-PROGNAME.
data: Begin of table occurs 10,
line(150),
end of table.
read report p_pname into table.
loop at table.
write / table.
endloop.
Plzzzzzz Reward if useful,
Mahi.

PHYSICAL FILES FOR ABAP PROGRAM

hi friends
i would like to know are there any physical files on os level for the ABAP programs.for example, when we create a customized report for sales in ABAP does SAP also create a corresponding copy on os level. if yes then in which file system .?
we have ECC 5.0 on AIX & use oracle 9i.
thanks in advance.
regards.

imran mohd wrote:
> hi friends
>
> i would like to know are there any physical files on os level for the ABAP programs.for example, when we create a customized report for sales in ABAP does SAP also create a corresponding copy on os level. if yes then in which file system .?
>
>
> we have ECC 5.0 on AIX & use oracle 9i.
>
> thanks in advance.
>
> regards.
The code you write in ABAP is not stored on OS-level (at least not in an ABAP-stack system) - it's contained in the database. As for the 'copies' your management wishes (for some ambigous reason) to have - there's no need. The code you write is versionised, so that every change made to the code is automatically documented when you press 'Save'.
That was answering a 'basic' question - but you have made me very curious now: would you mind to explain why you would want a 'copy' of your custom code on OS-level? Any special reason??
Edited by: Mylène Dorias on Jun 9, 2010 1:37 PM typo

How to get Access key for ABAP Program development in HANA Studio

Hi,
I have got instance for ABAP on HANA development system.
But while creating new program it is asking me for Access key, since I do not have user id pwd for service market place I couldnt able to create the access key.
Can any one suggest the way to create ACCESS KEY??
Thanks,
Ram

Dear Ram,
it seems that you need to follow the chapter 6.1 in the documentation...:
Kind regards, Stephan

Transport for ABAP Program

Hello,
Can anyone tell me how I can create a transport for and ABAP Program. It is currently in DEV but needs to go to test.
Thanks

I think you must have created this object as a Local Object. You need to do 2 things here :
Reassign the Development Class to a Z Dev Class.
Use trx code SE38. On the first screen, specify the program name & click on Goto-->Object Directory Entry.
You will get a popup here, change the Dev Class to whatever you have on your side, this will prompt you for a Workbench Transport request. Follow up with Basis to get it to Test.

Table for the program name description

hi,
i want to know the table which stores the description of the table.
i having the TADIR(Directory of R/3 Repository Objects) which stores the data about a program but i want to have the description of the program also.
plzz provide me guidelines for getting the description of the program.

Hi Ricx.s,
Dont ask these type of simple questions, you might have got the answer if you have done a search.
So do have a Habit of searching before posting a question.
Anyhow a Must to have book for Technical Consultants;
[SAP Tables for Technical Consultants|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e944e133-0b01-0010-caa2-be2cb240f657]
Download the above PDF and check it, it has all important technical and functional module tables.
Regards
Karthik D

Statistic tables of Abap Programs

hi experts,
I'm tring to find the tables of statistical programs.
I need specifically the frecuency of use of the programs.
Do someone knows the tables of statistical programs.
Can someone give me some light?
Thanks in advanced
FRANCISCO

Francisco Rodriguez Monroy wrote:
> I need specifically the frecuency of use of the programs.
>
Then you need to check transaction code STAT or ST03 for getting the data you may need to use fm
SAPWL_WORKLOAD_GET_STATISTIC
PS These data not stored in any tables, but get stored in os files
a®

Can I use logical databases in a WebDynpro for ABAP program?

can I use logical databases in a WebDynpro ABAP program?
I need to build a WDA screen that is similar to the SAPDBPNP selection screen (user can find the personnel number based on several criteria, such as last_name/first_name of the employee). So it seems that the exisinting logical databases have already many nice features already built (like the selection screens, the logic behind the screens etc). So I was wondering if/how I can use them in my WDA application.

Hi
Please let me also know the solution to this. I am a beginner to WebDynpro and want to know if I can make use of LDB's as we do in our normal HR programming do develop a WDA in HR.
Thanks and regards,
Uma.

Client export for ABAP programs, repository objects cross client objects

Hello,
Let me first explain the scenario here. Our Development system crashed we are rebuilding the development system from a client export of the production. Client does not want migration etc so the only way we want to do it is through client export.
Now the question is whether cross client objects can really be imported through client export KT, KO, KX requests?
I thought it was possible but after successfully importinng the client export (which was taken using profile SAP_EXPC) of the Production client all the customizing has been imported but non of the ABAP programs have been imported.
Can anyone explain how this is done and if it is possible?
Steps I performed:
1] Exported Production client with profile SAP_EXPC
2] Imported the 3 requests KT, KO, KX using command line
tp import <KT req> <SID> U2 client=<my client> pf=<profile path>
tp import <KX req> <SID> U2 client=<my client> pf=<profile path>
tp import <KO req> <SID> U2 client=<my client> pf=<profile path>
3] After successful import ran scc7 which finished successfully
Thank you

You can transport client independent customizing, read sap note [24853 - CC-INFO: Client copy, functionality|https://service.sap.com/sap/support/notes/24853].
But you cannot transport abap repository objects (abap programs) with a client copy.
Can you explain what you mean by "Our Development system crashed". If you still can happily do client copies to that system, then i really wonder what you mean by crashed...
Cheers Michael

Table for ABAP programs

Similar Messages

Maybe you are looking for