Table for consumption forecast results?

Hi everyone,
I have executed consumption forecast for material A, and I can see the forecasted values in table PROW. The problem is that I do not know how to relationate this table with material A.
I thought I could use field PNUM2 which also exist in tabla MVOP, but  I do not know how to update this table since it is allways empty.
I would be very grateful if someone could help me.
Thanks in advance and best regards.
Ben

Hello Ben,
Did you get rid of this, I looking for Comparison between Forecast and actual counsumption.
If you can suggest....
Regards,
JPS

Similar Messages

  • APO Tables for DP forecast Data

    Hi All,
    I am working in VMI scenario. An IDOC of type PROACT carries the
    forecast data for DP.
    I need to fetch the dates for which the Forecast data is already existing in the database.
    Can some one name the tables where the forecast data is stored.
    Regards,
    Ashish

    Hi Ashish,
    If your Planning Area has a an export datasource that is connected to a remote cube, you can also access the contents of the Planning area using function module RSDRI_INFOPROV_READ. This uses the InfoProvider interface. There's a version of the function module that is RFC enabled as well.

  • Table for the recorded result.Result automatically calculated using formula

    Hi experts,
              I want to know where this results will be saved(table name) when we use formula in inspection plan.I have marked char.calc in control indicator and formula has been entered in inspection plan.While entering the result when i click on calc button it is displaying correct result and i have saved.when i check the table QAMR,QASR it is not displaying the result for the MIC which i have used formula.I am able to see the formula in QAMV table.When i want to display this result can i retrive the result directly from any of the table or shall i calculate the formula in the program to display?   If i should calculate the formula how to calculate?
    Regards,
    Shwetha.

    Hii,
    If u are using Inspection point for the results recording then results will get stored in QASR table. The manually entered results alone will get stored in the Original_ Input field. Calculated parameters will get stored in the mittelwert field (mean value). Kindly check QASE table for lot without inspection points.
    For ex : Results Field name mean value (1.7500000000E+02)
    with regards,
    K.Lokesh.

  • Tables for char and attributes

    Hi ,
    How to identify that a characteristic for an inspection lot has long term characteristics ?
    We want to retrieve the characteristic attributes for qualitative characteristics . What is the table link for the qualitative characteristics and the characteristic attributes ?

    Check following thread--->
    Control Indicator field in Inspection plan characteristics
    for tables
    Results Recording QAKL Results table for value classes
    Results Recording QAMR Characteristic results during inspection processing
    check bapi
    BAPI_INSPCHAR_GETRESULT
    Edited by: Sujit Gujar on Mar 15, 2011 9:35 PM

  • TABLES OF CONSUMPTION

    HI
    PLZ TELL ME THE TABLE NAME OF CONSUMPTION.

    Check standard report MB5B or Check report MB51 for movement types 201,122,161,261,601 etc.,
    or else check this link for tables
    Re: Table for consumption of material

  • Table for MRP results

    Dear all,
    Is there any table in which the results of MRP run are stored?
    I want to pick up some of the data for a report.
    Thank you,
    Shrenik

    Dear Shrenik,
    check in these tables,
    MDKP                           Header Data for MRP Document                           
    MDTB                           MRP Table                                              
    MDVL                           Planning file entry for long-term planning             
    MDVM                           Entry in MRP File                                      
    PBVPV                          Material index for consumption of planning             
    PLAF                           Planned order                                          
    REUL                           Material stock transfer reservation index              
    SAFK                           Run Schedule Master Data                               
    T024D                          MRP controllers                                        
    T436A                          Floats for scheduling                                  
    T437V                          Distribution key in MRP                                
    T437W                          MRP distribution key (texts)                           
    T438A                          MRP Type                                               
    T438S                          Text describing the range of coverage profile          
    T438T                          MRP description                                        
    T438X                          MRP group text                                         
    T439F                          Handling of planning flag at abnormal termination      
    T439L                          Warehouse costs for MRP lot size                       
    T439T                          Texts for lot-sizing procedures                        
    T440A                          Change fields for MRP                                  
    T440B                          Control table for creating MRP record                  
    T440F                          Exception messages for the forecast                    
    T440Z                          Allocate error -> error class in the forecast          
    T449A                          Period split                                           
    T449B                          Period split: language-dependent description           
    T450                           MRP transaction control                                
    T457A                          Processing key for planning run                        
    T457C                          Transaction calls control                              
    T457S                          Block table for MRP and forecast run                   
    T457T                          Description of MRP elements                            
    T458B                          Description of exception messages                      
    T460A                          Special procurement key                                
    T460B                          Special Procurement Key Conversion                     
    T460C                          Order/Purchase order types for planned order           
    T460D                          Order/Purchase order types for planned order           
    T460T                          Texts for special procurement keys                     
    T461P                          Planning strategy group                                
    T461S                          Planning strategies                                    
    T461T                          Planning strategy text                                 
    T461X                          Planning strategy group text                                                                               
    Regards
    Mangalraj.S

  • S076 SOP table for SD report (Sales Forecast Report ).

    Hi
    We are using S076 SOP table for SD report (Sales Forecast Report ).  This has only material number as key at present , where as we want to know if flexible planning will give material/shipto as key for forecast.
    Thanks In advance .

    Hi
       These are the key figures I am seeing in OMOJ , As I am new to this functionality                                  I am not able to add new key figures , can I request you to explain it to me ......
    Key figure                     F D 
    Sales     
    Production                         
    Stock level                        
    Target stock level                 
    Days' supply                       
    Target days' supply                
        Thanks

  • Tables for Single-quantity Inspection Lot Results

    Hello!  I hope someone could help me out on this one:
    Please correct me if I'm wrong, but I noticed that in an inspection lot, the results of the inspection is stored in the table QASE, but only if the quantity inspected is greater than one.  So, my questions are:
    1.  Which table are the results for single-quantity results are stored?
    2. [Optional] Why are the results not stored in the QASE table?
    Thank you in advance.

    Thank you very much for the response.  However, the QAMR table does not contain the data I need that table QASE has, specifically:
    Serial number            (QASE-SERIALNR)
    inspection results      (QASE-MESSWERT)
    Additional input from anyone would be greatly appreciated.

  • What is table for results field in results recording

    Dear all,
    Please tell me the  table for the results in results recording .
    Thanx in advance.
    Regards
    Srinivas

    Hi,
    QAMR                             Characteristic results during inspection processing
                                                                                    QASE                             Results table for the sample unit                                                                               
    QASR                             Sample results for inspection characteristics                                                                               
    Regards
    Mangal

  • Table / FM for Consumption of meter

    Hi Experts,
    I have to find out consumption of meter and check meter in a particular month/period  please give me table of FM which give details of consumption.
    Any help will be highly rewarded.
    Regards
    Bikas

    Hi,
    Usually the consumption is stored at register level and hence not at the device/meter level....
    Hence check out the tables for register data...
    EASTS or EASTL
    Also to find the corresponding FM, try : <Table> you may get the related FM that fetched/udpates data in these tables.
    some of them can also be useful to you:
    Meter reading document for Equipment/Device
    ISU_DB_EABL_SELECT_EQUNR      
    ISU_DB_EABL_SELECT_EQUNR_ENT  
    ISU_DB_EABL_SELECT_EQUNR_PRE  
    ISU_DB_V_EABL_SELECT_EQUNR_ALL
    EASTS : Billing data: Installation Structure at Reg. Level
    ISU_DB_EASTS_FORALL        
    ISU_DB_EASTS_FORALL_ANLAGE 
    ISU_DB_EASTS_FORALL_LOGIKZW
    ISU_DB_EASTS_RATETYPE_SELECT  
    ISU_DB_EASTS_SELECT           
    ISU_DB_EASTS_SINGLE           
    ISU_DB_EASTS_UPDATE
    Reward if useful
    Regards
    Shiva

  • How to check forecasting result of SOP for specific week

    Dear All,
    How to check forecasting result of SOP? As in my case we are doing planning on weekly basis, and i want to check few old  forecasting results, how to check it????
    BR
    Bhushan

    Thanks Rupesh,
    Thanks for your immediate responce
    Already i check up with MP30/ mp32  (Except MD70 and MD73). But in this case input will be material / Product group
    I want to check what is the output on that particular forecasting date (we are using product groups) The input i have is the particular date on which forecasting was done.
    Could you plz help me out in this???

  • Extract forecast results and accuracy (errors) in an ABAP program

    Hi Experts,
    We are executing forecast in background using planning jobs in a process chain. We are doing this in 2 stages - 1. at Product group & Location level and 2. at Product & Location level. The selection ids that we have created for these jobs contain multiple product & locaton combinations or product group & locaton combinations.
    We can see the forecast reults, messages and errors in the job logs and messages (in the process chain ad spool). I would like to extract this same information into an ABAP program. We are basically tryig to find out the Product group and location combinations for which the MAPE is greater tha 50%.
    There is a table /SAPAPO/FCSTACCU which gives the MAPE and other forecast errors. There is a fileld "Pointer for forecast results", I'm not able to relate this with our Product group & Location codes. Can anyone give me any ideas on how to proceed?
    Thank you indeed for your contribution.
    Best regards,
    Fasial Ali

    Hi
    All the background job are getting stored in the following tables
    /SAPAPO/LISLOG
    /SAPAPO/LISMAP
    I think here you should able to find out all the information per product , location. As the respective information is available in tables, you can use them in ABAP program.
    I hope this will help you.
    Amol

  • MM - Consumption Forecast Value

    Hi everyone,
    I have added in 'MM02->Additional Data->Consumption' some values in the Corrected Value column. What I need to know is the table in which these values are stored.
    Moreover, I would also like to know in which table are the forecasted consumption values stored.
    Thanks in advance and best regards.
    Ben.

    Please check the table MVER for consumption values in material master. PROW for forecasted values.

  • Copy history as the forecast result

    Hi Experts,
    Has anyone ever use the forecast model that copying the past 12 months history as the future period forecast result in PP forecast model?
    I know this function is availbale in APO DP, But I want to use this function in R3 not in APO.
    thank you in advance!

    Hi, here is the steps by step procedure to create SOP flexible plan along
    with trasaction codes. Let me know if you have further problems
    S&OP Flexible Planning Checklist
          Step #
         Description
          1
         Create Field Catalogue MC18
          2
         Create Info Structure MC21
          3
         Create Update Rules for Characteristics and Key Figures MC24
          4
         Activate Update Rules OMOZ
          5
         Testing (Use Sales Order, Purchase Order, Material etc.) to test data
    MC30
          6
         Set Parameters for Info Structures MC7f
          7
         Create Planning Type for Info Structure Planning Table MC8A
          8
         Generate Master Data and generate proportional factors MC9A
          9
         Create Planning Hierarchy MC63
          10
         Create Forecast Profile MC96
          11
         Create Planning Activity MC8T
          12
         Setup Mass Processing Job to generate forecast MC8D then MC8G
          13
         Maintain all Material Master records with unit of measure conversions
    so that the planning table can aggregate materials into a common unit of
    measure. MM02
          14
         Apply OSS patch program that enables visibility of all nine hierarchy
    planning levels in planning table. (Check version 4.5 and prior)
          15
         Set up program to collect Historical transaction information (Need
    Custom ABAP program to populate the SOP table with historical data)
          16
         Run Monthly Sales Forecast MC8D
          17
         Transfer to COPA (if applicable)
          18
         Run COPA Analysis
          19
         Transfer forecast to Demand Management MC94 (Extra Menu -> Transfer to
    DM)
          20
         Demand Management receive the updated Sales Forecast quantities MD61
    -Farrukh

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

Maybe you are looking for

  • Frm-47023 no such parameter named query_only exist

    Hi Everyone, I am creating a simple form, I just put a textbox on the canvas throug layout editor. and run the form,it gives the error frm-47023:no such parameter QUERY_ONLY exists in form moudle1. I click the ok button of alert box , it gives - frm-

  • MySQL Select Statement Help Required

    I am trying to generate a report in VS 2008 (C#) using a mysql select statement but cannot get it right. I have groups that meet on a weekly basis on different days. I want to generate a report that shows me all the members that have not attended the

  • **I pod plays but, does not commence the song**

    Well the problem is that i can select a song and my ipod starts it. But it just stays at 0 seconds. If i fast forward the song it moves but, it does not play. Lets say i fast forward it to 32 second mark of that song. It stays there even though it is

  • Storing a Blob into MySql  from a JTextArea

    I'm using Java 1.4.1, MySql 4.0.12, and MyConnector/J 3.06 I have an application with a JTextArea and I want to put the contents of the JTextArea into the database stored as a Blob Object. The only reason I'm using Blob is because varchar is limited

  • WiFi problem - No internet / DNS Not working

    Hi, I installed 64bit Windows 7 on my T500, and I'm having problems when connecting to wireless networks. Everything works fine with wired networks, but when I connect to a wireless network (any wireless network) DNS isnt working. I can ping and conn