Table for Customer stock in Quality inspection

Hi
In which Table the following is stored
For current month
Customer stock in Quality inspection
Unrestricted use Consignment Stock
For previous month
Customer stock in Quality inspection
Unrestricted use Consignment Stock
Thanks
RG

>
R G wrote:
> Hi
>
> In which Table the following is stored
>
> For current month
> Customer stock in Quality inspection
> Unrestricted use Consignment Stock
>
> For previous month
>
> Customer stock in Quality inspection
> Unrestricted use Consignment Stock
>
> Thanks
> RG
Check the following tables:
MSKU,MKOL
MSKUH,MKOLH
Regards,
Indranil

Similar Messages

  • Block for payment in MIRO if there is blocked stock in quality inspection

    Hi all,
    In quality inspection, if they put some quantity into blocked stock, then i should go for payment block in MIRO . Here
    the QA status may be Pass or Fail.
    my payment block will depend upon blocked stock in quality inspection but not on QA status.
    Thanks
    babu

    Hi Pabitra
    If the material is taken to QI, then no liability is created for the vendor during GR. Now if you pass it in QA, then the stock moves to Unrestricted stock. Now if you transfer from Unrestricted stock to blocked stock, this will not block MIRO, as the GR/IR has already been hit.
    if you bolck payment for these type stock, then you can take help of User Exit, in MIRO
    Regards

  • How to consider 'Stock in quality inspection' in SNP

    Hello,
    In my SNP Planning Area there is a Key Figure (Quantity Available) to display the stocks (CC- Stock; CE- SubConStk; CK- RstrUseStk).
    The business want me to add the QM stocks (Stock in quality inspection) in the SNP run so I added the category CF to this KF however the QM quantities never are available.
    Could you pls give some information?
    Thanks,
    Leo

    >
    Senthil Mareeswaran wrote:
    > Hi Leo,
    >
    > Your requirement can be done.
    >
    > In transaction /SAPAPO/MSDP_ADMIN,  if you double click a particular planning area, it will display
    > the various key figures, info, key figure aggregation, locking logic etc.,
    >
    > Under key figure tab, click on key figure selection, you need to maintain category group and
    > category which corresponds to stock in quality inspection. 
    >
    > Use the category group to specify the order categories you want to be considered by
    > Supply Network Planning (SNP) when reading the key figure from liveCache.
    >
    > You create category groups in SNP Customizing activity Maintain Category Groups. You can also
    > specify per category the quantity types you want the system to read.
    >
    > Hope this will resolve your query.
    >
    > Please confirm your findings.
    >
    > Regards
    > R. Senthil Mareeswaran.
    Hi Senthil,
    I followed the steps you have given, but I'm still not able to see the value populating in my SNP Planning tables.
    I created ZCC - ATP Category group and assigned CI, CK ATP category for Blocked stock and restricted stock.  I added 9AADDKF2 in my SNP planning area and changed the semantic to 000 to make it livecache order KF. I assigned the ATP Category group ZCC to this KF and saved the planning area. After activation, I went to my planning view, but this KF value is not populated.
    Is there something I'm missing here?
    Thanks,
    Rajesh

  • Allow Negative Stock in Quality Inspection

    Hi All,
    I have a general question regarding Negative Stock.
    Is it possible by any means to allow -ve stock in Quality Inspection. If yes then what are the customizing settings that are needed.
    Any valuable inputs will be really appreciated!!
    Thanks In Advance!!
    S

    hi
    firstly how can we have negative stock in Quallity
    stock updates in quality from PURCHASE or PROduction so we cant have -ve stock in quality
    negative stock will be there only up on consumtion
    now u can have negative stock in GOODS ISSUE ,as on emergency if u dont have mateial and u have to issue some material to production then u have to have -stock open
    now for this go to material master plant data 2 view and here u can ticl for allow negative stock
    regards
    kunal

  • Transfer posting stocks from quality inspection to unrestricted, problem

    Hello Guys,
    kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
    please advise me the correct way to settled this.
    thanks and regards,

    Hello Guys,
    I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
    Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
    Regards,

  • Change stock from unresticted stock to quality inspection stock

    Hi,
         I have a material with Qualtiy View.we have done G.R. & also made UD & now my material lying in unresticted Stock.but now i want to cancle the G.R..
    What is the procedure to change stock from unresticted stock to quality inspection stock through quality module.
    Regards
    Pavan

    Hi
    user Exit QEVA0008  in SMOD you can check the documentation.
    Module for Editing Customer Function Code
    This user exit allows you to activate a function key in the menu for the
    usage decision.
    You can freely define the description and function associated with this
    function key (+FC1).
    You can use this feature, for example, to revoke (reset) the usage
    decision.
    Refer to the documentation for function module EXIT_SAPMQEVA_008.
    Functionality
    This function module is called if the freely defined function (+FC1) in the menu for the usage decision transactions is called up. A prerequisite for this is the activation of the user exit QEVA0008.
    Example
    Using this function module, you can reset the usage decision in transactions QA12 ("Change usage decision with history") and QA14 ("Change usage decision without history").
    Include LXQEVF10 contains sample coding for resetting the usage decision.
    Notes
    Business transaction QM68 is available for this function in the standard system. You can display a where-used list for this transaction in transaction BS33 (Display transactions).
    If business transaction QM68 was carried out successfully, the system sets the inspection lot status "UDRE" - usage decision reset (system status I0297). You can display a where-used list for this status in transaction BS23 (Display system statuses).
    If you want to use the function to reset the usage decision, be sure to consider the following points:
    If a vendor is released (status profile in the quality info record), an update is carried out only once; this means that if the usage decision is reset, the status in the supply relationship is not corrected.
    If you make the usage decision again, the inspection results will also be transferred to the batch classification.
    The quality level is updated only once (when you make the initial usage decision). If the usage decision is changed, the quality level is not updated.
    Regards
    Sujit

  • QM- Stock en quality inspection

    Hi gurús,
                   Some units of material still been in quality inspection but the used decision for the inspection lot for this material and batch already exist.
    When we try to do a 321 movement type from transaction MB1B to move the material from quality to unrestricted stock, the system display the error message "Change the inspection stock of material MP.0V961 in QM only".....But the inspection lot had the used decision already taken
    ¿How can we transfer the stock from quality inspection to unrestricted stock?
    Thanks in advance for the help
    Regards
    Enzo

    Option 1: What you can do is deactivate QM for this material temporary. Move the stock from quality to unrestricted then and activate QM again.
    Option 2: Add a new inspection type 04 to the material. When you transfer post the material it creates a inspection lot where you should make a decision for. When you did this delete inspection type 04 again.
    Option 3: You have somehow wrong entries in a table. I had the same here, when i wanted to transfer post sales order stock unrestricted with a mvt 311 to another storage location i got the same error.
    I created a SAP note for that and this was the reaction:
    the error message is indeed not justified.
    It is caused by a faulty entry in control table T156M.
    Display T156M using se16 with key BUSTM='MAA7'. You get 6 entries.
    Change the display in order to show table field LBBSA:
    BUSTM ZUSTD CNT02 LBBSA
    MAA7 01 01
    MAA7 02 02 <<<< wrong! LBBSA should be '01' for this line
    MAA7 0 01 08
    MAA7 0 02 08
    MAA7 2 01 01
    MAA7 2 02 02
    the same table entry has two more invalid settings, fields SMSKA and
    SMSSA:
    T156M key BUSTM MAA7
    ZUSTD
    CNT02 2
    ->
    SMSKA AQ1 -> should be A01
    SMSSA ASQ -> should be ASL

  • How to scrap specail stock in quality inspection...

    hi guys:
    I have a query, Is there any possible way to scrap the sale order stock in quality inspection without transferring it to the unrestricted stock and that also through inventory count(mi01,04,07),
    Actually we have damage lighting stock which is received against sale order(automatically transferred to quality inspection), and customers are replaced with new units, then this stock is called back in head office, for this we have a complicated process in use, first this stock is scraped from suppose "a" storage location after transferring it to unrestricted, then loaded back to "a", to make an STR for it from Head Office.
    So is there any way to scrap all special stock(complete storage location) against different sale orders at one go. whether the stock is available in unrestricted, quality inspection or blocked stock.
    I hope I am understood.
    Please help me to get through this complicated process.
    Regards
    Salar...

    Thx you guys are fantastic; I appreciate your help;
    below given is the post which has helped me, but there is some problem at the end, after the click of this point "11. (Click) in the gray box next to the session name and click . " there was nothing to proceed with, though I have posted the count through mi24 and post the difference with mi07, but still want to know what goes wrong with mi31, I have given the appropriate time for back ground processing....one thing to note there were 2 old inventory documents seen to be pending of the same storage location I was posting the count off, is this the reason of problem in processing of mi31,,,,,,please guide...
    Hi Buddy This transaction is used to create physical inventory documents for multiple materials in your plant and storage locations. Inventory documents may be created and printed prior to the count date; however, the posting block should not be set until the day of the actual physical inventory count. 1. From the SAP R/3 System screen, enter transaction code MI31. 2. Click or press Enter. The Selected Data for Phys. Inventory Docmts w/o Special Stock screen displays. 3. Enter or select a value for each of the following required fields: - Plant (enter plant code) - Storage location (do one storage location at a time) - Name of session Remove the checkmark from the Materials marked for deletion field will exclude items previously marked for deletion from the inventory document. The default session name is MB_MI01. Enter your initials and the session number after the default session name to identify it as your own. Example: MB_MI01_WW1 - Max. no. items/doc - use 99 for main storage location; - use 300 for truck storage locations. - Planned count date - enter date of inventory count - Physical inventory number - enter fiscal year followed by plant number and storage location. Example: 2004FY60118071. MI31 Create Physical Inventory Documents (in batch) - Set posting block - check if count is immediate; do not check if creating batch documents ahead of the inventory count date. - Sorting u2013 click on and select Plnt- Stor.bin description-Material. 4. Erase any variants under u201CDisplay optionsu201D. 5. Click . The Batch Input Created for the Creation of Phys. Inv. Docmts screen displays. Enter through any system information messages or errors. 6. Click . The Batch Input: Session Overview screen displays. 7. Click in the gray box next to the session name to highlight row. Click . The Process Session {Session name} dialog box displays. 8. Select the Background radio button. 9. Click . The following message displays: u201CX session(s) transferred to background processingu201D. It takes approximately 5 to 6 minutes for the system to process a batch session. Please wait at least 5 minutes before continuing with Step 10. 10. Click in the gray box next to the session name and click . The Batch Input: Log Overview screen displays. 11. Click in the gray box next to the session name and click . The Batch Input Log for Session {Session name} screen displays. If the batch processing is completed the last line in the Message column should read u201CBatch input processing endedu201D. If this message does not appear on the last line adequate time was not provided for the batch process to be viewed. SAP continues the batch processing in the background. Use transaction MI24 to retrieve a complete list of Physical Inventory Documents created. 11. Record the physical inventory document numbers created. You will need the document numbers to print the inventory documents. Clicking on can print this list. 12. View the log for any errors generated. A material master record being blocked for updates at the time of processing may cause errors. Add the material to a physical inventory document using transaction code MI02. Regrds Yogesh
    Thanks & Regards
    Salar...

  • Deficit of BA stock in Quality Inspection

    Hi All,
    I have a situation that's a bit complicated.  I hope I don't confuse anyone.  I'm trying to do a UD for an item, but I'm getting a Deficit of BA stock in quality inspection. 
    We purchased 200,000 of an item and a GR was done.  This was done during inventory, the item was physically counted and someone made an error in the count.  At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.  I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system. 
    Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
    As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
    When we attempt to do a usage decision we get the following error message:
    "49,000 EA incorrect posting to block stock, error msg:
    Deficit of BA stock in qual. insp 49,000 ea:"
    BTW, none of these quantities (The 49,000 or 151,000) shows up in MMBE.   We've tried posting the stock in QA32, but of course it doesn't exist.  What are we missing?

    Hi Xamaica,
    If lot status is ' REL CALC SPRQ' that means  this lot is not canceled, you should be able to post.  If  the lot status would have been  LTCA then selection profile will help you in filtering canceled lots.
    please  give inputs  on following:
    We purchased 200,000 of an item and a GR was done.
    Have you posted the stock of 2 lacks  to unrestricted and then later  inventory was done ?
    This was done during inventory, the item was physically counted and someone made an error in the count. At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.
    Since system allowed you to do inventory  that means stock of  2 lacks was available that time in unrestricted.
    I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system.
    If inventory is done and only 49000 stock is remaining, document can't be canceled, may be somebody must  have again  done inventory  and removed that  49000 also.
    Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
    As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
    I still believe that the status can't be   REL CALC SPRQ, one more thing, you said  you purchases 200,000 then how you get  two  lots of  151000 and 49000?  what insp type  is activated please  confirm?
    If stocks  are not available then  you should Block the lot  as  nothing is required from this lot.
    If status is 'REL CALC SPRQ'  then go to MIGO and cancel that document strait away.
    Pl check and revert.
    Best Regards,
    Shekhar

  • Inspection setup maintained while stock in quality inspection

    Dear Consultants,
    While having stock in quality inspection we were still able to maintain the inspection setup in QM view of that material in that plant.
    Actually the system should have thrown error "To activate QM, the inspection stock for the material must be empty". But some how this is not happening.
    Kindly provide solution.
    Regards,
    Ninad.

    Hello Ninad,
    You can activate an
    inspection type under the following conditions:
    If it is not stock-relevant
    If it is stock-relevant and at least one active stock-relevant inspection type exists
    If it is the first stock-relevant inspection type and no inspection stock exists, or if you set the indicator Activate despite insp. stock
    above lines are copied from
    https://help.sap.com/saphelp_46c/helpdata/en/2d/350ef6448c11d189420000e829fbbd/content.htm
    Your scenario falls in 2nd condition. You can activate inspection type if it is stock-relevant and at least one active stock-relevant inspection type exists.
    Amol.

  • Unrestrected use stock to quality inspection stock

    Hi,
    plz tell me how can transfer Unrestrected use stock to quality inspection stock for same material and same palnt

    Hi Prasad, Make sure that inspection type 08 is assigned and activated in Material Master's QM view. Then you would be able to move the stock from unrestricted to quality using MB1B (Mvt/Type 322).
    Also check : Stock Reversal - From Unrestricted to Quality
    Edited by: m_n_novice on Sep 5, 2009 2:02 PM

  • Sto stock to Quality Inspection stock

    Hi,
    I want Sto stock to Quality Inspection stock.Then i want Quality Inspection stock to production purpes
    I want return stock to Quality Inspection stock.then Quality Inspection stock to normal stock

    HI,
    For the material to go into quality stk,in the puchasing view of material master for the receiving plant tick the post to inspection  stk & save.
    Then do the STO the material will come automatically into quality stk.
    Even if u dont tick in material master still u can receive the matl in QI stk when doing migo by selcting the QI stk.
    After receiving the matl u can move it by using tcode MB1B & mvmt type321 to Unrestricted use.
    IN SAP only the unrestricted can be issued to production.
    Edited by: Murugan mgl on Aug 13, 2009 8:15 AM
    Edited by: Murugan mgl on Aug 13, 2009 8:16 AM

  • Table for Customer and vendor open balance on a key date

    Dear All,
    Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
    I have checked with the below table :
    Customer-KNC1, KNC3,BSID, BSAD
    Vendor-LFC1, LFC3, BSIK, BSAK.
    But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
    Plesae let me know, how to go for it.
    Please suggest.

    Hi
    Use BSID and BSIK for open items
    And pass company code, year and from date and to date range in Posting date selection option
    Reg
    Vishnu

  • Need table for customer and vendor carry forward balance

    Hi,
    I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
    I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
    Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
    Thanks in advance.
    Regards,
    Swati

    Hi Gurus
    The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
    Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
    and my 2nd query is how to get these opening balance in Z report, at Header Level.
    Thanks and Regards
    Dnyanesh

  • Z table for Closing Stock

    Hi ,
    My  requirement is to make Z table for closing stock.
    As ours is a pharma firm  and we have implemented SAP in Aug 2008.
    Now for  closing stk  we are using S033 and MSEG table to get opening stk
    SELECT SUM( mzubb ) SUM( magbb ) INTO (w_dr_menge , w_cr_menge)
            FROM s033
           WHERE sptag < so_fkdat-low
             AND werks = werks
             AND matnr = matnr.
      w_opening_balance = w_dr_menge - w_cr_menge.
    and for closing stk = opening stk - sale + receive.
    Now the problem is  when we want to retrieve data for closing stk for last month ,it is checking all the records since Aug 2008  for opening stk and it is taking too much time to retrieve data.
    Can anyone plz suggest any alternative for thsi problem.
    I will really appriciate your help.
    Regards,
    Archana

    Hi
    done this before. for sure you will experience an performance problem in your current setup. what we did is we create a program that calculates the ending inventory of the month then beginning inventory of the following month we are executing this in every end of the month. In that case when we need to access the previous month the ztable must be use. make sure that your program can do rerun of the ending and beginning of stock because there are chances of previous posting of reversals.
    Thanks,
    Best regards,
    Etrafanob

Maybe you are looking for