Table for Data source and Transfer rule mapping

Hi all,
Do we have any table where in we can know the different transfer rules(for different source systems) assigned to the same Data source.
thanks and regards,
Rk.

thank you all,
the table RSDS does not have 3.x data sources, it has only 7.0 Data sources also it does not have the field mapping.
RSOSFIELDMAP and RSTSRULES have the field mapping of the datasources, do we have any similiar tables for 7.0 Datasources.
regards,
RK

Similar Messages

Help to read a table with data source and convert time stamp

Hi Gurus,
I have a req and need to write a ABAP prog. As soon as i excute ABAP program it should ask me enter a data source name, then my ABAP prog has excute teh code, in ABAP code i have to read a table with this data source as key, sort time stamp from table and should display the data source and time stamp as output.
As follows:
Enter Data Source Name:
Then user enters : 2lis_11_vahdr
Then out put should be "Data source :" 10-15-2008.
The time stamp format in table is 20,050,126,031,520 (YYYYMMDDhhmmss). I have to display as 05-26-2005. Any help would be apprciated.
Thanks,
Ram

Hi Jayanthi Babu Peruri,
I tried to extract YEAR, MONTH, DAY separately and using
EDIT MASK written it.
Definitely there will be some STANDARD CONVERSION ROUTINE will be there. But no idea about it.
DATA : V_TS      TYPE TIMESTAMP,
       V_TS_T    TYPE CHAR16,
       V_YYYY    TYPE CHAR04,
       V_MM      TYPE CHAR02,
       V_DD      TYPE CHAR02.
START-OF-SELECTION.
GET TIME STAMP FIELD V_TS.
V_TS_T = V_TS.
CONDENSE V_TS_T.
V_YYYY = V_TS_T.
V_MM   = V_TS_T+4(2).
V_DD   = V_TS_T+6(2).
V_TS_T(2) = V_MM.
V_TS_T+2(2) = V_DD.
V_TS_T+4(4) = V_YYYY.
SKIP 10.
WRITE : /10 V_TS," USING EDIT MASK '____-__-________'.
          /10 V_YYYY,
          /10 V_MM,
          /10 V_DD,
          /10 V_TS_T USING EDIT MASK '__-__-__________'.
If you want DATE alone, just declare the length of V_TS_T as 10.
Regards,
R.Nagarajan.
We can -

OWB 10g -- Can't Create Database Links for Data Source and Target

We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.

As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not.

R/3 tables for data sources

can anyone tell me r/3 tables for plant maintenance data sources
0PM_DISMANTLE
0PM_MEASUREMENT
0PM_OM_OPA_1
0PM_OM_OPA_2
0PM_OM_OPA_3
0PM_PRM_PLCS_1
2LIS_17_ACTY
2LIS_17_CAUSE
2LIS_17_ITEM
2LIS_17_NOTIF
2LIS_17_OPERATION
2LIS_17_ORDER
2LIS_17_TASK
2LIS_18_ACTY
2LIS_18_CAUSE
2LIS_18_ITEM
2LIS_18_NOTIF
2LIS_18_OPERATION
2LIS_18_ORDER
2LIS_18_TASK
2LIS_05_ACTY
2LIS_05_CAUSE
2LIS_05_ITEM
2LIS_05_NOTIF
2LIS_05_OPERATION
2LIS_05_ORDER
2LIS_05_TASK
i am not able to find the r/3 tables?
please suggest me
i will assign points

Hi Vishal,
Please see the below link.
http://help.sap.com/saphelp_nw04/helpdata/en/f6/7a0c3c40787431e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c1/840c3c40787431e10000000a114084/frameset.htm
Click on Datasources. There u can find some tables and fields u want.
Assign points if it helps...
Regards,
ARK
null

Data source and Transfer Stracuture Missing..

Hi,
     How to search the Data Source in BI?
<Removed by Moderator>

Hi Sumit,
             I had one CO_PA cube,my infosource is ZIC_CO_PA.but there is no DS and Transfer Strucuture avaliable in my sys.data was avaliable.
       My work is Migrate the data flow on This IC? How it Possible?i am working in BI7.0,and one more thing i am also checking in source system there is no related DS.
Thanks

Create two or more data sources and mapping to DSO

Hi,
I´m using SAP Netweaver BI 7.0.
If there are two or three data sources which have to be mapped to DSO which field from Data Sources has to be mapped to which field in DSO?
Is it possible to have only one DSO or should it be three DSOs because of the three Data Sources?
The thing is I have created one view out of three tables. For the view I have created one DSO. Everything worked fine. But now the requirements have changed because of currencies.
The view I have created is now mixing currencies because in the view is only one currency field, which is filled from the three tables. Two tables have different currencies and one table has one currency.
The one currency of the one table is important and should stay like it is.
I´m thinking about something like three different currency key fields in DSO which are mapped from data source. Also for every field of data source mapping with corresponding field in DSO.
Some hints? I have found articles in SDN about creating data sources and so on but they don´t help me in this matter.
Thank you in advance!

Thank you guys for explaining! I´m new to SAP BW and trying to better understand.
I`ll try it also with the view. It sounds "easier".
But if I´m doing it with the 3 data sources, that means that for each currency field of the data source I will need an corresponding currency field in the DSO for mapping.
Is it possible to have 3 times the 0Currency field in the DSO and each data source currency field will be mapped to the DSO?
If that would work the 0Currency has to be contained in the key figures.
But if the 0Currency is contained in each key figure will the assignment of currency work correct?
+For example:+
Data Source1:
Turnover in Euro.
(All currency is in Euro)
Data Source2:
Profit in Dollar.
Profit in Euro.
Profit in Yen.
Profit in different currencies available.
Data Source3:
Sales in Dollar.
Sales in Euro.
Sales in Yen.
Sales in different currencies available.
For mapping from DataSources to DSO if it is possible to have 3 times 0Currency in DSO:
Data Source1 currency fiield ---> DSO 0Currency
Data Source2 currency fiield ---> DSO 0Currency
Data Source3 currency fiield ---> DSO 0Currency
Does it make sense?

Issue with table ROOSPRMSF entries for data source 0FI_AP_4

Hi Experts,
I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries. Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL.
From OSS note 852443 point 3
"3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE copy entries into ROOSPRMSF table in R/3 ?
Could any one please clarify this ?
Thanks
Regards,
Jeswanth

Hi Amarnath,
Did you unhide the new field in RSA6 and regenerated the DataSource?
Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
Grtx,
Marco

Data source and credential mapping

Hi,
I need to programatically override the credentials specified in data-source's connection pool.
Specifically, when getConnection() is called by the applicaiton, I would like my code to take control and supply credentials.
I saw the concept of role mapping module for JCA connectors (as JAAS login module), but I did not see anything for normal data-sources.
Can I enforce JAAS login module for data-source credentials?
Does anyone have any other ideas?
Thanks,
Yair

Hello,
I don't think that is possible. The connection pool is created once the OC4J instance is started and the connection pool is also handled by the OC4J instance.

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Create a data source and database tables using WSAD

Hi, guys:
the following is from a tutorial:
http://www-106.ibm.com/developerworks/websphere/techjournal/0306_wosnick/wosnick.html
"To create the data source and Cloudscape database tables automatically, right click on the HelloWorldServer in the Servers view, and select the Create tables and data sources menu item. A dialog will then display showing that the data source and database tables were created successfully (Figure 5)."
I am using WSAD 5.0 trial version. I cannot find Create tables and data sources menu item if I right click on the HelloWorldServer in the Servers view. I am wondering if this is because trial version does not have this feature?
regards

This question is a little off topic but you may get a reply. Please note this forum is about Sun's J2EE SDK and its related technologies. You may have better luck posting your question to an IBM specific resource.

Whar are logical table, Physical table Logical data Source

Hi,
Can any one explain me in details what Whar are logical table, Physical table Logical data Source.
Any qucik help will be graetly appreciated

In OBI there are three layers - Physical, Business Model and Mapping (BMM) and Presentation.
As the name specifies the Physical layer mainly contain physical aspect of the application like which connection to use, which schema (also catalog in case of SQL server) to connect and also which table to use. This layer confirms the PK_FK joins for the related tables. This layer mainly depicts how the data has been stored in the database layer.
On top of this layer you will have you BMM layer. The place where all work of a developer starts. You will structure the tables accourding to the business need. The structure has to be a STAR schema. All the entities in this layer are called logical because they do not directly represent any database object rather they provides a logical mapping to the database entities. This becomes clear when you use more that one Logical Table Source (LTS) for your logical tables. One logical column can map to N number of physical columns based on context. You can also create calculative columns in this layer which are totaly logical in nature.
I am not writing anything on Presentation layer as it is not in you question. :)
Hope this will help.
Regards,
Somnath

Regenerate datasource and transfer rules

Hi All,
a job got failed with the the error message that one of the field lenght is changed. Now datasource and transfer rules has to be regenerated. can anyone explain the procedure for this.
Regards,
Nishi

Hi Nishi,
Just check what made this change to that specific object...
Check whether any new transport has made on this object if u are in production....
If u are in production then the object needs to corrected from the D to Q and then to P and u cannt do anythign in the production directly.
If u are in Dev.. then check the object which is causing this issue. Drop the existing data from the target then then introduce a new object with the proper Length as mapping to eh R3 field.. and then proceed with the further steps...
If u are in production and if dont see any changes to this object then try replicating the DS and then activate the TS and then try reloading the data and check if this works fine..
thanks
Hope this helps..

ODBC call SQLDriverConnect for data source Server name failed: [ . Notify Customer Support.

Need help !
While running DS job through designer we are getting below error:
ODBC call <SQLDriverConnect> for data source <SErver name> failed: <[>. Notify Customer Support.
Additional notes:
1. Source and Target datastore are getting connected properly as i have imported table's definition using it.
2. Source and target data store pointing to SQL server 2008 R2 express edition DB (64 bit).
3. It seems like server machine has both 32bit and 64bit drivers installed on it. Please refer attached driverdetails.jpg file for more details.
Thanks

Hi did you referred this :
ODBC call <SQLDriverConnect> for data source <MyComputer\SQLServer2008R2> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.>. Notify Customer Support.

I added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..b

i added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..but i am not seeing any data in target table..
what would be the cause

Hi,
I guess you mean the target table in BW, correct?
First replicate your DSource in BW
Open your TRules. In tab Transfer structure/Datasource locate your field in the right pane (should be greyed, not blue); move it from to the left (to the transfer structure); reactivate and reload.
You should now see the field in your PSA table.
hope this helps...
Olivier.

Generic Data Source and InfoPackage Data Selection

Hello, I'm trying to extract data from a generic data source (composed of a view joining 4 tables) using the Data Selection Criteria in an infopackage. Sometimes the selection criteria is ignored and more data is pulled than expected. The number of selectable items in the generic data source has been reduced (in case this was an issue) and for a short time the infopackaged pulled the expected number of records. Then another change was made to the generic data source and the problem returned. In any case, the transported generic data source does not work in the target system either. I'm not sure what is causing this to happen. Any ideas??? BW 3.5.
Regards,
Sue
Message was edited by: Sue and Enrique
Ramesh P

Hi,
Some of the datasources will not have default Infopackages for them.You can create the infopackages according to the requirement.There is no big deal for creating Infopackages.You can go ahead creating them.
Regards
Karthik

Table for Data source and Transfer rule mapping

Similar Messages

Maybe you are looking for