Table for DSO and associated transformations

Hi Guru ,
Is there any table where we can find out details of DSO like Number of Transformations for that DSO and other related details.
Thanks & Regards,
Rohit Garg
Edited by: Rohit Garg on May 12, 2009 6:22 AM

Hi,
Use table RSTRAN to find the number of transformations.
Give the DSO name in sourcename field and OBJVERS as "A". The number of entries will give you the number of transformations for which the DSO is the source.
Similarly find the number of transformations for which the DSO is the target by giving the DSO name in the targetname field and objvers as "A".
The total will give you the number of active transformations.
Regards,
Archana

Similar Messages

Why do we create indexes for DSOs and Cubes.What is the use of it?

Hi All,
Can you please tell me why are indexes created for DSOs and Cubes.
What is the use with the creation of indexes.
Thanks,
Sravani

HI ,
An index is a copy of a database table that is reduced to certain fields. This copy is always in sorted form. Sorting provides faster access to the data records of the table, for example, when using a binary search. A table has a primary index and a secondary index. The primary index consists of the key fields of the table and is automatically created in the database along with the table. You can also create further indexes on a table in the Java Dictionary. These are called secondary indexes. This is necessary if the table is frequently accessed in a way that does not take advantage of the primary index. Different indexes for the same table are distinguished from one another by a separate index name. The index name must be unique. Whether or not an index is used to access a particular table, is decided by the database system optimizer. This means that an index might improve performance only with certain database systems. You specify if the index should be used on certain database systems in the index definition. Indexes for a table are created when the table is created (provided that the table is not excluded for the database system in the index definition). If the index fields represent the primary keys of the table, that is, if they already uniquely identify each record of the table, the index is referred to as an unique index.
they are created on DSO and cube for the performance purpose ..and reports created on them wil be also more efficent ..
Regards,
shikha

Table for Customer and vendor open balance on a key date

Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.

Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu

Need table for customer and vendor carry forward balance

Hi,
I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
Thanks in advance.
Regards,
Swati

Hi Gurus
The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
and my 2nd query is how to get these opening balance in Z report, at Header Level.
Thanks and Regards
Dnyanesh

How to find R/3 table for FI and PS Datasources

Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
Shanthi

Hi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK

Source tables for forms and tabular forms must have a primary key.

Why does HTML DB 2.0 return the message
"Source tables for forms and tabular forms must have a primary key."
when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
bw - Christian

Christian,
In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
Regards,
Marc

Taking long time filling the setup tables for sales and shipment

Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .

Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth

Table for terms and conditions

what is table for terms and conditiions??
regards
jyoti

Hi Jyoti,
If u are looking for the payment terms then the table T052 and T052U.
Regards
Kiran Sure

Base tables for aggragates and Multiproviders

Is RSDICMULTIIOBJ the base table for Multiproviders?
What is the base table for Aggragates and units?

Multiproviders
RSDCUBEMULTI
RSDICMULTIIOBJ
Aggregates
RSDDAGGREF
RSDDAGGRT
RSDDCVERREPAGGR
RSDDAGGR
RSDDAGGRCOMP
RSDDAGGRDIR
RSDDAGGRDIR_M

How to fill up set up tables for 2lis_03_UM and BF?

Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanks

Hi,
I think you can follow the same procedure. After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM

Table for shipping and billing documents ?

hi experts,
how can we come to know that what shipping (VL01n), and billing(VF01) documents has been created for any particular date.
actually the problem is that i want to modify some documents that i have created a few days ago, plz help me?
thanks in advance.

Hi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka

Table for preceding and Susequent documents .

hi experts,
Please tell me the name of table which contains all preceding and subsequent documents of purchase order or sales order.
Answer will be rewarded by Max points.
regards,
Sandeep

Hi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka

Table for Material and Inspecton lot together?

Dear SAPIENTS,
Please tell me table for Material and Inspecton lot together.
Regards,
Kaushal Rai

Hi Kaushal,
- Run trx QA08.
- Select the option Activate inspection type. (This tab should be green)
- Enter material type at least to not have a junk of data at a single execution. You can set other fields as per your requirement.
- Check the Box "Assign Inspection type", Don't check/activate any of the rest three
- Enter the inspection type, here is an limitation you can know the status inspection type by type.
- Execute.
- The system will give you the list of the materials that are note activated for the inspection type you feed in the selection screen.
Hope it satisfy you. at the other way me and you both will search for the better option.
Regards,
Shyamal

Date format accepted in new table but not in active table for DSO, BI 7.0

Hi All,
Need help from the experts, i was trying to load Flate file data in CSV(Coma separated) and cell type general for dates(yyyymmdd). everything was fine i have a routine for new fields in DSO for Fiscal week and Fiscal Quater which is calculating based on my Flate file date i.e delivery date(yyyymmdd).
The New table of DSO means before activation everything was fine and all the logics and mappings working for the Fiscal week and Fiscal Quater and that can be visible, But after activation the same only the Fiscal week and Fiscal Quater is not showing data, its comming as blank and '000000' for all records.
As the Fiscal week and Fiscal Quater is maintained as custmised InfoObject with data type NUM.
Can you tell what i am missing, because i tried with different cell type also in CSV File.
Thanks and Regards,
Taps
Edited by: Taps on Oct 1, 2010 1:21 PM

Resolved...!!!
Follow the link ...
/people/maheshsingh.mony5/blog/2010/09/24/update-behavior-of-end-routine-in-transformations
Regards,
Taps
Edited by: Taps on Oct 1, 2010 2:02 PM

Table for Component and Component Description in CS03

Hi,
I want to know the table associated with CS03 Transaction.I mean from which table we can get component and component description. And Is there any way that we can pull all the characterstic Values for that particular component.
Thanks in advance

Hi
see the tables
MAST
STKO and
STPO
all related to BOM
Bill of materials
to pull all characteristic values
use tables CAWN and AUSP or
Use the following BAPI's:
BAPI_OBJCL_GETDETAIL
or use the fun module:
CLAF_CLASSIFICATION_OF_OBJECTS.
Regards
ANJI
Message was edited by:
Anji Reddy Vangala

Table for DSO and associated transformations

Similar Messages

Maybe you are looking for