Table for Email and Postal Address for payers

Hi ,
I would like to know how to download email address and postal address of list of payers i have. Which is the table that has this data?

Dear Vinod,
Addresses of both Customers & Vendors is stored in ADRC tabbe. ADRC is master table of all Addresses in the system.
From KNA1 take Customer Code & Address field.
From ADRC take list of all address. Here Address Number field is same as Address field in Csutomer Master.
In Excel run Vlookup on above two files with Address & address numbers feilds as common.
Hope the above is useful..
Reward if you like to..
Thanks,
Jignesh Mehta
Mumbai
98700 10230

Similar Messages

How to reconfigure notification email and smtp addresses

Hi all,
I want to reconfigure notification email and smtp addresses on single instance db (10.2 and 11.1 versions). How this is done?

emca -reconfig dbcontrol db [email protected]
/opt/oracle/product/11gR1/db/bin/emca [operation] [mode] [dbType] [flags] [parameters]
-h | h | -help | help: prints this help message
-version: prints the version
-config dbcontrol db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure Database Control for a database
-config centralAgent (db | asm) [-cluster] [-silent] [parameters]: configure central agent management
-config all db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure both Database Control and central agent management
-deconfig dbcontrol db [-repos drop] [-cluster] [-silent] [parameters]: de-configure Database Control
-deconfig centralAgent (db | asm) [-cluster] [ -silent] [parameters]: de-configure central agent management
-deconfig all db [-repos drop] [-cluster] [-silent] [parameters]: de-configure both Database Control and central agent management
-addInst (db | asm) [-silent] [parameters]: configure EM for a new RAC instance
-deleteInst (db | asm) [-silent] [parameters]: de-configure EM for a specified RAC instance
-reconfig ports [-cluster] [parameters]: explicitly reassign Database Control ports
-reconfig dbcontrol -cluster [-silent] [parameters]: reconfigures RAC Database Control deployment
-displayConfig dbcontrol -cluster [-silent] [parameters]: displays information about the RAC Database Control configuration
-migrate -from dbcontrol -to centralAgent [-repos drop] [-cluster] [-silent] [parameters]: migrates EM configuration from Database Control to central agent
-upgrade (db | asm | db_asm) [-cluster] [-silent] [parameters]: upgrades an earlier version of the EM configuration to the current version
-restore (db | asm | db_asm) [-cluster] [-silent] [parameters]: restores the current version of the EM configuration to an earlier version
Parameters and Options:
[parameters]: [ -respFile fileName ] [ -paramName paramValue ]*
db: perform configuration operation for a database (including databases that use ASM)
asm: perform configuration operation for an ASM-only instance
db_asm: perform upgrade/restore operation for a database and an ASM instance
-repos create: create a new Database Control repository
-repos drop: drop the current Database Control repository
-repos recreate: drop the current Database Control repository and recreate a new one
-cluster: perform configuration operation for a RAC database
-silent: perform configuration operation without prompting for parameters
-backup: configure automatic backup for a database
Parameters for single instance databases
ORACLE_HOSTNAME: Local hostname
SID: Database SID
PORT: Listener port number
ORACLE_HOME: Database ORACLE_HOME
HOST_USER: Host username for automatic backup
HOST_USER_PWD: Host user password for automatic backup
BACKUP_SCHEDULE: Automatic backup schedule (HH:MM)
EMAIL_ADDRESS: Email address for notifications
MAIL_SERVER_NAME: Outgoing Mail (SMTP) server for notifications
ASM_OH: ASM ORACLE_HOME
ASM_SID: ASM SID
ASM_PORT: ASM port
ASM_USER_ROLE: ASM user role
ASM_USER_NAME: ASM username
ASM_USER_PWD: ASM user password
SRC_OH: ORACLE_HOME for the database to be upgraded
DBSNMP_PWD: Password for DBSNMP user
SYSMAN_PWD: Password for SYSMAN user
SYS_PWD: Password for SYS user
DBCONTROL_HTTP_PORT: Database Control HTTP port
AGENT_PORT: EM agent port
RMI_PORT: RMI port for Database Control
JMS_PORT: JMS port for Database Control
EM_SWLIB_STAGE_LOC: Software library location
PORTS_FILE: Path to a static file specifying the ports to use (Default value : ${ORACLE_HOME}/install/staticports.ini).
Additional Parameters for cluster databases
CLUSTER_NAME: Cluster name
DB_UNIQUE_NAME: Database unique name
SERVICE_NAME: Service name
EM_NODE: Database Control node name
EM_SID_LIST: Agent SID list [comma separated]

HT2486 my telephone address book -- which I like to keep exclusively for my phone numbers -- keeps updating and adding my whole list of email and physical address contacts. It's clogging up my phone directory. How do I undo that without deleting all my

My phone (4s) is somehow adding all my email and physical mail address book contacts to my contacts in my phone, which I prefer to keep to telephone numbers only. How do I get all this stuff out of my telephone book and back to normal?

If renaming addressbook.data.previous to addressbook.data hasn't brought back your contacts, get rid of addressbook.data (drag it way or delete it) and rename addressbook.data.beforesave to addressbook.data
The rename process works for some people and not for others; I suspect it has to do with how soon after the problem they have tried it.
No, I didn't take your reply as being rude.
I don't know of any way of recovering anything from the skindexinverted file, and anyway I suspect it is litterally an index, and does not hold the full data. Certainly on my machine it is only 1/20th of the size of the data file.
AK

Detecting email and web address from textarea

I want that if the user is putting email or web address in the text area that should be held and not be shown.
any clue please
thanks

regex?
A quick and crude attempt (completely untested):
// email
"\\s*[^@]+@[^\\s]+"
// web
"\\s*https?://[\\s]+"
thanks for your reply and if i wanna add (dot, com, at) then?
thanks again

How do I hide my email and ip address from a website?

I am on a simple free fan oriented college sports team opt in website, and I keep getting booted because I posted a picture in the comments section - totally PG. The moderator is being a punk and keeps booting me after two days no matter what different or new email I register with. I am 100% minding my own business and not being disruptive and simply reading about this particular college team I follow and all the commentary other similar fans post. I did not use any foul language or post any inappropriate messages. The moderator still keeps removing me after two or three days no matter what I do or do not do. He is just simply being difficult. I tried emailing and communicating with him and he says he does not have time for me and deletes my registered user name and blocks my access. What can I do to make myself look like a new registrant and just read the free articles like any other user without incurring the ire of this whiny little webmaster?
Message was edited by: Bergs85

You don't have to shut down the computer to switch accounts. All you do is click the Apple symbol in the upper left and choose Log Out and that's it. You can also set up Faster User Switching by:
1. Open System Preferences - Accounts
2. Click Login Options
3. Check the box called "Show fast user switching menu as" then choose from either icon, short name or name.
Then when someone wants to switch users they can. The advantage of this method is if you are have a document open and don't want to close it the document will remain open. If the other user attempts to shut down the computer they can't until you have logged out thereby saving all your data.
A very simple and elegant solution.

TS3991 I got an email saying my iCloud storage was full and gave me a link that I used to enter my icloud account. Now I can;t get email and the address of email is not iCloud. I think I have a virus now. Who can I contact to for help?

The email said Icloud Customer Care but address is ________ I was stupid and didnt notice this when I went into link and singed in with apple ID and password. Now I cant get email. Help!
<E-mail Edited by Host>

Apple sends no such emails. You succumbed to a phishing scam, and your Apple ID and password have been stolen.
To recover from this will require assistance from Apple: http://www.apple.com/support/appleid/contact/
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.

Address Book bug: email and im addresses print line break

Address Book prints a line break before each long email or instant messenger address.
When printing a list to PDF with e-mail addresses too long for one line, the address is preceded by a line break. See image:
http://home.student.utwente.nl/j.vanhengel/AddressBookprint_line_break_before_emailaddress.gif
This bug is not critical, but it is annoying. Use this information as you see fit.
MacBook 2GHz Intel CoreDuo Mac OS X (10.4.9) 1GB 667 MHz DDR2 SDRAM

Hello,
What have you done (if anything) to result in the apparent fonts being used in this example?
However, with testing, I see what you mean. The only setting that seemed to avoid this, is to use Pocket AB format, which then uses a smaller font for the email address, and appears to avoid this.
Ernie

I'm not receiving the verification email and the address is correct

My I-Cloud setting (Ipad2, IOS 5) says the email has not been verified. I signed into my Apple ID and selected
"send verification email" but I'm not receiving it. The email address is correct and I've verified it. Any ideas?

Have you checked in the spam/junk folders?

Ipad contacts - postal addresses repeatedly deleted - bug?

I have a problem with my "contacts" app on my ipad 2. I use this app as an address book (email and postal addresses) for all of my contacts but in the last few months i've noticed that some of my contacts' postal addresses are somehow getting deleted and when i look at thse contacts, an additional email address field has been added and populated with a random number instead (quite often 219 or 369).
Is this a bug and if so, how can i resolve it and/or stop this problem recurring...? It has happened about 3 times now and often to the same contacts!
Thanks in advance for your help!

Sounds like your kids share same icloud account with you.

Is there a way to recover old emails? I moved a few folders around on the hard disk and now my emails have reverted to Factory settings and all my old emails and address book have vanished. I am still running on 10.4.11 and Apple can not help me.

Is there a way to recover old emails? I moved a few folders around on the hard disk and now my emails have reverted to Factory settings and all my old emails and address book have vanished. I am still running on 10.4.11 and Apple can not help me. Does anyone out there have any idea on how to recover my lost emails and/or addresses?

Well, your profile info says 10.4.11, and you are posting your question in the iMac (PPC) category. If you are running Snow Leopard, it must be a fairly recent Intel iMac.
In that case, you should definitely post your question here
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard
where other Snow Leopard users can see your question. Restate the problem, what error messages you get, and what you have tried already (for trouble-shooting).

How to turn off email and web site links?

I'm making my own letterhead template for my massage business.
I want to turn off the automatic linking to my email address and web site which are both included on my letterhead. It's just annoying that every time I accidentally click on either of those I'm taken to my web site or my computer is trying to email me!
I only snail mail my letterhead and have no use for the linking. I can change the type format so it looks like the rest of the letterhead, but I can't turn off the linking.
Paul

There is an option under Preferences > Auto-Correction to "Automatically detect email and web addresses." You want that one unchecked. There is also a link inspector, second from the right, with options to enable hyperlinks or make all hyperlinks inactive. Seems contradictory to me & I've found that if a document already has some linked text, changing these preferences doesn't change the existing links. And, if you paste in something with a link the link will still be active.

Allowing visiters to leave email or web address?

I am very new to iweb but on my last blog[non iweb] when a person left a comment they also could leave their email and web address. I found this very handy for answeriing questions or responding to comments. I also enjoyed visiting my reader's sites. Does iweb allow this? If so I haven't figured out how to set it up and would appreciate any help....

Ah I see that now on the web site itself but not from iweb~ my last blog I could see comments and their name was hyperlinked to website and also I could reply to them directly from comment on my template. Now I can link to their websites from mine[not iweb itself] and there is no email them back function... unless I am missing something?

Delivery report shows status of Pending for external address. Email sent to both internal and external addresses.

We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
So it seems that the issue only arises when we are sending to both internal and external addresses.
I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
So, I have two concerns:
First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.

Hi Neil,
According to the description, I find a related KB on Exchange 2010:
https://support.microsoft.com/kb/2694474?wa=wsignin1.0
It has the similar situation as yours.
This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
Also please check whether Throttling has been set.
Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
More details to see:
Message throttling
http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that account. How do I change the email address to a new one that I can access?

I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that same account. Now I can't seem to login to that account and I can't choose the option for forgot password because it will send email to the old workplace. How do I change the email address to a new one that I can access?

If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you!

I have attempted to upgrade os4 to os7. icloud has taken an old expiered email address for which i do not know the password. It will not recognise my current email and password with itunes. Any help appreciated

I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
Thankyou

If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

Table for Email and Postal Address for payers

Similar Messages

Maybe you are looking for