Table for finding material cost in group currency

Hi ,
We are maintaing product cost on Cocode currency and group currency using CK11. We are not able to find the cost in group currecy in MEBW or KEPH.
Kindly let me know the right table to look into.
Thanks,
Jatin

Hi Jatin
Did you mean you have cost component split in controlling area currency? if yes, then you will get for each costing calculation two records in table KEPH, the currency label is field LOSFX. The record with blank LOSFX is company code currency, the one with "X" is controlling area currency.
Hope this helps.
Junqi

Similar Messages

  • Extract expense for a designated cost center group

    Hi,
    There is a problem that we want get expense for a designated cost center group instead of cost center and store in the cube. We can get the cost center group but it is a node in a hierachy. I don't know how to map cost center to it's group.
    Thanks in advance.

    >
    rahul dsnr wrote:
    > Hi,
    >  Thanks for ur reply, but those FM's are not providing Cost center group for a cost center.
    >
    >  Can u provide me a  better solution to find cost center group for a cost center.
    >
    > Regards,
    > Rahul
    Do you mean that you want to read the cost centre group hierarchy for a cost centre?  So that instead of entering a cost centre group and reading down the hierarachy until you get to the cost centre codes at the bottom, you want to enter a cost centre and then read up the hierarchy until you get to the cost centre group at the top of the hierarchy.  If so, I don't think there is a function module to do what you want.  The cost centre group hierarchy data is held in table SETNOTE, so you could have a look at that.

  • Table used in Material cost value

    Hi,
    In Material cost estimation Cost Components views are Material Cost, Material Overhead, Subcontracting Charges, Conversion Cost and Total Cost. Material Cost is calculated based on Material price, Bom Qty, value put in KP26 i.e, fixed and variable pirce with combination of Cost Center and Activity type and processing hours, Labout hours from Routing. Total Cost appears with the combination of Material Cost and Conversion Cost . This Total Cost appears in costing view tab of Material Master and CKIS table. which table stored in Material Cost value. Kindly need your suggestion.
    Regards,
    Anindita

    Hi A Roy
    The tables are KEKO and KEPH....
    In KEKO you will find prod costimation no against the combination of Plant/Material
    Against this Prod Cst Est no, you will find the cost break up in KEPH table
    Regards
    Ajay M

  • Material item number for Settlement Material Cost

    Dear All,
    My client want to see the line items for settle Material i.e. he needs materials item number and qty for settled material cost in perticular project / WBS.
    Thanks and Regards,
    Atul R. Rajmane

    Dear Nitin,
    Thanks for Replay.
    CJI3 report give actual cost line item. For settle values its will show cost but not material number. My Client needs the material number and qty for settled value of material cost.
    Specifically, he need an WIP report which shown material number and qty berak for WIP amount of a specfic project/wbs.
    Thanks and Regards,
    Atul R. Rajmane

  • Table for total actual cost and total actual revenue.

    Hi Gurus,
    Can anybody pls tell me what is the table for total acutal cost and total actual revenue for a service order.
    Thanks in advance.
    Regards
    Satish

    Check COSP

  • Table for finding GROUP or WEBGROUP

    Experts, does anybody know where can I find GROUP/WEBGROUP name in the database. Is there any OOTB table provided by OBIEE. My group information is coming from Siebel.I want to know where is the group information present in OBIEE datamart?
    thx,
    parag

    Hi,
    Check the below link-
    http://obieeblog.wordpress.com/2009/06/18/obiee-security-enforcement-%e2%80%93-external-database-table-authorization/
    You can see that GROUP is assigned from some table used for authorization. Similarily you too might have tables used to assign the variable.
    Refer-
    http://www.rittmanmead.com/2012/03/obiee-11g-security-week-connecting-to-active-directory-and-obtaining-group-membership-from-database-tables/
    Hope this helped/ answered
    Regards
    MuRam

  • Enhance 2LIS_03_UM to include Material Ledger and Group Currency

    Hi all,
      I have searching for a solution for this issue for almost a week now both in SDN and Service Marketplace but seems that there is very less informaton about it.
    Background:
       We are in the process of implementing the standard content for Inventory in BI and have followed all the steps necessary to initialize and load data.  Out data matches perfectly with reports such as MC.1 and MB5L however in the Revaluation datasource there is no provision to pickup other currency type for material price maintained in material ledger.
    I have been trying to find some User Exit/BADI either in the V1/V2 posting or during V3 collection run to pick the delta in standard price and Moving Average Price (MAP) for these difference currency types but without any success.
    We have total three valuations maintained in the ML (Material Ledger)
    10 - Local Currency (this is the only one provided in the standard content extractor)
    30 - Group Currency With Group Valuation
    31 - Group Currency with Legal valuation
    Even if I change the Group currency in MR21 the change is picked up by 2LIS_03_BF and with the field BWGEO blank. This is not surprising since this field is for Local currency only.
    I am sure that someone must have faced this issue before where material ledger is active, any help is appreciated.
    Thanks
    Raj

    Hi,
    Delta load extracts data from Delta Queue based on your update mode selected in LBWE.
    Full Load or Init load extracts data from Setup tables, here if you are extracting data from setup tables ? did you fill the setup tables now or not after deleting the existing data of the setup tables?
    are you getting same values when compare to R/3 and BW data for some document numbers?

  • How to find the cost center group from cycle/ segment in CO module?

    Hi All,
    I need to fetch the list of cost centers in the cost center group against the cycle.
    Is there any table which will store the list of cost centers against the cycle?
    or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
    but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
    Regards,
    Mrunal

    FM: RK_AL_CYCLE_READ
    CHECK TABLE: T811K

  • Table for finding out the User details

    Hi All,
    We need to create a KPI for number of hours a user has looged into a system. Is there any specific table where all the user related information is captured.If the information is not present in a table where  can we find the above information?Please someone help me out.....
    Also is it the same in all the systems or does this information differ from system to system?If it differs then how do we find the number of hours a user has logged in for a BW system, for a CRM system and for ECC system?
    Regards,
    Shravani

    Hello,
    USR01User master record (run-time data)
    USR02 Logon data
    USR03 User address data
    USR04 User master authorizations
    USR05 User Master Parameter ID
    USR06 Additional data per user
    USR07 Object/values of last failed authorization check
    USR08 Table for user menu entries
    USR09 Entries for user menus (work areas)
    USR10 User master authorization profiles
    USR11 User Master Texts for Profiles (USR10)
    USR12 User master authorization values
    USR13 Short Texts for Authorizations
    USR14 Surchargeable language versions per user
    USR15 External User Name
    USR20 Date of last user master reorganization
    USR30 Additional Information for User Menu
    USR40 Table for illegal passwords
    USR41 User master: Additional data
    USRCOBJ Object Filters for Exploding Product Structures
    USRM0 Material Master User Settings: User Screen Reference
    USRM1 Material Master User Settings: Organizational Levels
    USRM2 Material Master User Settings: Logical Screens
    USRMM User settings: material master
    Might be these can help you.
    Thanks
    Geeta

  • Table for "Budget planning : Cost Center"

    Hi Gurus,
    can anyone pls tell me table for "Budget : Cost Centre" . We create budget with respect to cost center in KPZ2/KPZ3 but i am unable to find out in which this data can be found.
    Pls tell me the table to retrieve the data.
    Regards

    You can do it yourself.
    goto transaction St05. activate the trace. then execute the transaction. after execution goto st05. click deactivate trace.
    then click display trace...hit enter button. a list will be displayed. goto menu bar choose first menu then choose option "Summarice sql statements"...a list will be displayed from which you can know what all tables were affected by the transaction.

  • GR Table for incoming material and GI shipment

    Dear All,
    I'm trying to make report to show total GR for incoming material (101-102)  and shipment (601-602) per month, is there any shortcut table that already sum or show total amount for GR or GI material instead of MSEG?
    ex. I can get total GR to Production Order using AFPO table, it shows total GR Production per order, so i can get only 1 summary record instead of 31 records of daily confirmation to production order.
    Best Regards,

    HI ,
    i think u can check table EKBE and check for VGABE.
    Regards
    Prabhu

  • Standard table for finding query where used list

    Are there any standard tables available to find the list of web templates, bex reports and views using a particular query?
    i.e if i have the query name i should be able to find out where all it is being used.
    Thanks,
    Archna

    Hello,
    You have to join multiple tables to achieve this, here we go
    FOR QUERY Related Information
    RSRREPDIR - Directory of all reports (Query GENUNIID)
    Choose Type of a reporting component -> REP
    Tips :
    Choose Type of a reporting component -> QVW for query view
    SE11 -> RSZ* -> F4 gives you all tables related to queries
    For WORKBOOK Related Information
    Use the FM RRMX_WORKBOOK_QUERIES_GET to get the queries in a workbook by selecting the workbook ID from table RSRWORKBOOK
    Tips :
    SE11 -> RSRWB* -> F4 gives you all tables related to workbooks
    SE37 ->RRMX_WORKBOOKS* -> F4 gives you all the FM related to workbooks
    For Webtemplate Related Information
    Choose the dataprovider for query / view ID.
    SE11 -> RSZWOBJXREF - Structure of the BW Objects in a Template
    Also see,
    SE11 - > RSZWTEMPLATE - Header Table for BW HTML Templates
    Thanks
    Chandran

  • Name of the table for Standard Output/Cost maintained in in the IO

    Dear All,
    We go to KO03, enter the order no, display the order. Go to extras, Cost analysis. There are two columns. Total target cost and total actual cost. I need to find out the name of the table where the target cost/standard output is stored.
    Thanks in advance,
    Thanks,
    Satya

    Hi,
    The tables are :
    COSP
    COSS
    COSL
    COSB
    Regards,
    Eli

  • Table for change in cost center in Kb61

    Dear friends,
    I changed the cost center using t code KB61, From which table i can get the details of change in cost center
    Rgds
    Madhavan

    Hi,
    KB61 will post the document with the change from old cost object to new cost object in CO documents, so you can check the following tables for this posting.
    CO document Header: COBK
    CO document items:COEP
    CO summary table:COSP (or COSS)
    best regards, takashi

  • Tables for  BUDGET & ACTUAL - COST CENTER

    Hi
    I want to know what are the table in which the actual and the budget for the COST CENTER are stored....
    Regards
    SAP4ME

    Hi Eli,
    Thnx for the reply.i have already checked those mentioned by u.
    My req is  that i want to pull the DATA for developing a report of ACTUAL and BUDGET for a particular cost center o range of cost cost centersfor a range of period.
    But in the table mentioned by,how can i will come to know,to which cost center ,what is budgeted and the actual .
    Please give some details.
    Regards
    SAP4ME

Maybe you are looking for