Table for IBase Component
Hi,
Can anyone tell me the table where the IBase Component is Stored?Howz it related to the Support Desk Message through Tables?
Thanks in advance,
Sivagami.R
Hey Sivagami,
Here is the relation between Support Msg and Ibase component....
Every Support Msg has something called as GUID which uniquely identfies a Suppport Msg...
We can get this GUID from Table crmd_orderadm_h....Just pass the request id.....
Now pass this guid to FM CRM_REFOBJ_READ_OW to get ibase and ibase component....
Reward for usefull answer,,,,
Regards,
Anand...
Similar Messages
-
CRM tables for iBASE, Counter and pricing details.
Hi Everybody,
Can anybody help me with the name of the tables and the joining condition for iBASE, Counter and pricing agreement tables.
Say, I have only service contract number and GUID, to start with.
I'm looking for counter id and the reading, from iBASE. Then, using the pricing agreement, I want to convert the volume to an amount.
Regards,
Sanj.Hello,
Could you find a way out for creating counters in an IBASE component programatically?
Rgds
Priyanka -
Function Module required for IBASE component
Hi Experts,
Is there any FM which can get the warranty start date with IBASE component??
Warranty is assigned to IBASE component under relationship tab.
Points shall be rewarded for sure
Regards,
MadhuHi Madhu,
This the Table that is used to retrieve the Warranty Profile for the Installed Base. CDBD_IL_IBCWTY - Installed Base Components - Warranty Relationship. If you know the IBASE no and the corresponding COMP number then you can get the Warranty related details. Till now I was unable to find any FM that would do the same.
For the IBASE related details, you can have a look at the following Function Group. IB_CRM_API - IB: CRM APIs for IBase.
Thanks,
Samantak.
Rewards points for useful answers. -
ChaRM Copy Control for Ibase component
Hi Team,
I have created ZDCR which is copy of SDCR. And i have created ZDHF which is copy of SDHF. I have created the ZDHF as a subsequent document from ZDCR. While ZDHF is created, the Ibase component is not getting copied from ZDCR.
How to copy the ibase component from ZDCR to ZDHF?
Thank you for the input.
Regards
KumarHi
you need to maintain the settings
goto spro change request management->extended configuration->copy control
define mapping rules
here choose your entries and check the IBASE column.
this shd solv u prb
Regards
Prakhar -
Which data source for ibase component description ?
Hello,
i would like to extract the description (text) for Ibase components, but i can't find the right data source.
The datasources 0CRM_IBASE_TXT, 0CRM_IBAKEY_TXT and 0CRM_COMPIB_TXT are returning only the text for Ibase header
object, not for components. Table IBINTX contains the requested texts - how can i get them via standard extractor ?
Thank you for your reply.
Best regards
h. severinHello,
i would like to extract the description (text) for Ibase components from a CRM 7.0 system, but i can't find the right data source.
The datasources 0CRM_IBASE_TXT, 0CRM_IBAKEY_TXT and 0CRM_COMPIB_TXT are returning only the text for Ibase header
object, not for components. Table IBINTX contains the requested texts - how can i get them via standard extractor ?
Thank you for your reply.
Best regards
h. severin -
CHARM: Automatic assignement for IBase/Component in Change Request
Hi!
By creation of Change Request the value "IBase / Component" should be filled.
The default values here are: "0" and "0".
Has some one already customizng experience here?
I would like to change the value to e.g. "1" and "314" (my productive IBase).
Thank you very much!
regards
H. ThomassonHi Roel,
many thanks for your response. You talking about service desk issue.
Unfortunately we do not use service desk and create the change requests manually.
As I mentioned of great interest were the issue with customizing of layout and actions within Change requests and documents.
Here some examples:
automatic assignement of change manager to the change request
automatic assignement of Ibase to the change requests
Do you know the customizing procedure here (tcode, documentation) and can help?
Thank you in advance
H. Thomasson -
Tables for TRIP component in HR
Hi Experts,
I am working on a report having the background of 'Travel management' component ( TCODE-TRIP ) in HR module.
I want to know which Table fields (OR Tables) get populated/updated for a given 'PERNR' in this component.
The Fields are :
1) GL account , 2) Wage Type 3) Wage type Description 4) Approving manager.
In which Tables do these fields get populated?
Just to give you the background of the report which I am working on, its a report where 'The employee enters details of the reimbursements of the business trips he has completed and then send that data to his/her manager for approval'.Hi ,
the data for trip transaction is stored in cluster table PCL1..
to get the data from PCL1 according to 1) GL account , 2) Wage Type 3) Wage type Description 4) Approving manager you need to use MACROS..
see the sample macro to get the data ..
* Credit Card expenses.
SELECT * FROM pcl1 INTO TABLE save_pcl1
WHERE relid = 'TC' "press F4 and see the type which you are using
AND aedtm IN r_date. "Date range
IF sy-subrc = 0.
LOOP AT save_pcl1.
CLEAR hold_line_cnt.
wa_tc_key = save_pcl1-srtfd(8).
CLEAR inbel.
REFRESH inbel.
* Subroutine to import receipts data by using macro
PERFORM import_tc.
ENDLOOP.
ENDIF.
FORM import_tc .
IMPORT
inbel "All the creadit card receipts stored...
FROM DATABASE pcl1(tc) ID wa_tc_key-pernr
ACCEPTING PADDING.
ENDFORM. " IMPORT_TC
Prabhudas -
Table for cost component in COPA
Hi All,
I would like to know what is the table to get Cost component values of material in Product Costing like I have the material number and I want to know Cost estimate price of material against cost component rows?
BR,
AnkitHi,
Please check tables KEKO and KEPH.
Regards,
Hiten Patel -
Table for BOM component table for SFG/FERT goods
Dear All,
We are creating FRICE to calculate the cost of the product. The input parameter is the fert/sfg goods and the qty consumed to produce the goods and the opening stock and closing stock of the input/raw material of the fert/sfg has to be captured. From which table the same can be captured.
Regards
Vasantha.Dear All,
We are creating FRICE to calculate the cost of the product. The input parameter is the fert/sfg goods and the qty consumed to produce the goods and the opening stock and closing stock of the input/raw material of the fert/sfg has to be captured. From which table the same can be captured.
Regards
Vasantha. -
IBASE & Component in Change Request & Ugent correction
Hi,
I have configured CHARM for following landscape details.
Dev-100
QAS-200
Prod-300
For this I have defined the logical component as 100->200->300 & This is working fine. I mention the IBase & Component for Target system i.e. 300 client & Proceed for ChaRM Cycle.
But I am having one more client in Production i.e 310. So Can I maintain one more logical component say 100->200->310 & mention the target client for Ibase & Component for 310 target client . Will it work.
Regards
PKHi PK,
This is std behavior of SDHF : 'The task list of a mainten. cycle contains all the systems that you defined in the maintenance project.
The task list of an urg. correction contains the production system in which the problem occurred, and only the systems on the shortest transport route from the development system to the production system. This implements your urg. correction as quickly as possible.'
Answer to your question is here:
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
under 'Urg. Corrections' node you ll see those lines:
"You can use the program CRM_SOCM_SERVICE_REPORT to import urg. corrections simultaneously into production systems.
You can also import completed urg. corrections into parallel production systems with the program /TMWFLOW/SCMA_BTCH_SYNC_UC, or into parallel testsystems
with the program /TMWFLOW/SCMA_BTCH_SYNC_TEST. You can schedule this program so that it runs in the background periodically during the day, with the job wizard (transaction SM36).
You can also use the background tasks /TMWFLOW/SCMA_TRIMP_UC and /TMWFLOW/SCMA_TRIMP_TEST, which are in the maintenance cycle task list.'
More usefull info are under node : 'Scheduling the automatic import of Urg. Corrections'
Hope this helps !
Regards -
Trying to fill setup table for 2LIS_04_P_ARBPL
Hi
I am trying to delete and fill setup tables for 2LIS_04_P_ARBPL. I go to SBIW, delete setup tables for application component 04 and then go back to fill setup tables. But I get the message "DataSource 2LIS_04_P_ARBPL contains data still to be transferred".
Am I missing a step?
Thanks
PoojaI went to transaction SBIW ->Settings for Application specific datasources ->Logistics->Initialization->Delete contents of setup tables-> Application 04
Then under Initialization I went to Filling in the Setup table->Application specific setup of statistical table ->Production.
I entered the date & time (and entered my own Run name. Should I say new run or rerun or give my own Run name?) and executed the transaction.
Then I got the message - datasource still contains data to be transferred.
Thanks! -
CHARM IBase & Component tables
Hi,
I want to know the table names for Change Request (SDCR) & Urgnt Correction (SDHF). I want to capture IBase & Component in Work flow CHARM.
Regards
Praveen KHi PK,
that's pretty complicated to find the table that contains the IBase of a ChaRM Ticket (SDCR, MJ, HF...).
If your purpose is to catch the data for a use in an ABAP you have different ways to do it
1 - use function modul : CRM_ORDER_READ exporting the guid of your ticket and it will returns you in parameter et_service_os-osset-refobject-ib_instance the value of the Ibase
2 - Call Public Method GET_IBASE_OF_CHNG_DOC of Class CL_HF_HELPER that returns the same parameter type than the option 1
Hope it helps
Regards
Khalil -
IBase & Component table names ?
Hi,
Can anyone tell me, the table names where the IBase & Component related to a support message ticket are stored?
Thanks,
mahanteshHey Mahantesh,
Funtion Module CRM_REFOBJ_READ_OW is the answer for your question..
Please Reward points for usefull posts.
Regards,
Anand.. -
FM for deleting Component from Ibase Hierarchy
Hi,
Is there any FM for deleting Component from Ibase Hierarchy.
I have tried using the FM "CRM_IBASE_COMP_DELETE", it is anyway deleting the component from the hierarchy but not those component
whose is already assigned to a Contract.
I have read these similar thread of only deleting a component but it was not very helpful in my scenario.
In CRM, standard way of removing the component from Ibase Hierarchy is to "CUT" the component and save. The mentioned component will not
be seen in Ibase hierarchy.
So is there any FM which can actually remove or cut the component from the hierarchy even though it is assigned to any contract etc.
Awaiting for your expeditious help on this issue,
Thanks and Regards,
JojyHi Naresh,
Thanks for your response,
Is there any way of doing the same from Std. FM apart from doing it manually.
Mine is Interface scenario in which the call will be instantaneous.
I have tried to dismantle the component also, but it will be remain present in Ibase hierarchy even though it is associated to any contract or not with dismantle sign in it's hierarchy .
I want to cut it so that it will not remain in Ibase hierarchy, it can be present in CRM system. -
Tables for Project System Component
Hi,
I hve the list of standard DS from Project System component. Currently these DS are not active in our ECC system. Now I need to find the Source table for all these DS. Can any one please provide the table name if you have. I searched in sdn/help.sap but I couldn't find any.
Master Data DS:
0ACTIVITY_ATTR
0ACTIVITY_CUST_ATTR
0ACTIVITY_TEXT
0ACTIVITY_USR_ATTR
0ACTY_ELEMT_ATTR
0ACTY_ELEMT_CUST_ATTR
0ACTY_ELEMT_TEXT
0ACTY_ELEMT_USR_ATTR
0CASHDETAIL_TEXT
0CASHTYPE_TEXT
0CLAIM_ATTR
0CLAIM_TEXT
0DATE_EVENT_TEXT
0DATE_SRCE_TEXT
0MILESTONE_ATTR
0MILESTONE_TEXT
0MLST_USE_TEXT
0NAE_INH_ATTR
0NETWORK_ATTR
0NETWORK_CUST_ATTR
0NETWORK_TEXT
0NTW_INH_ATTR
0NWA_INH_ATTR
0ORD_INH_ATTR
0PROJECT_ATTR
0PROJECT_CUST_ATTR
0PROJECT_TEXT
0PS_APPLNO_TEXT
0PS_CHANCE_TEXT
0PS_COMPONT_ATTR
0PS_COMPONT_TEXT
0PS_HERKZ_TEXT
0PS_OBJ_TEXT
0PS_OPPNT_TEXT
0PS_PRJTYPE_TEXT
0PS_RESPNO_TEXT
0SCOPE_TEXT
0STATUSCLM1_TEXT
0STATUSCLM2_TEXT
0STATUSSYS0_TEXT
0WBS_ELEMT_ATTR
0WBS_ELEMT_CUST_ATTR
0WBS_ELEMT_TEXT
0WBS_ELEMT_USR_ATTR
0WBS_ELEMT_WBSH_HIER
0WBS_INH_ATTR
Transactional DS
0PS_CLM_CST
0PS_CLM_ECP
0PS_CSH_NTW
0PS_CSH_NWA
0PS_CSH_ORD
0PS_CSH_WBS
0PS_DAT_MLS
0PS_DAT_NAE
0PS_DAT_NTW
0PS_DAT_NWA
0PS_DAT_PRJ
0PS_DAT_WBS
0PS_KAP_NAE
0PS_KAP_NWA
0PS_NAE_ECP
0PS_NAE_EVA
0PS_NTW_EVA
0PS_NWA_ECP
0PS_NWA_EVA
0PS_ORD_EVA
0PS_WBS_ECP
0PS_WBS_EVA
Regards,
Jackie.Try to search it at Help.sap.com web page (use search for BI content)
For example for your first extracotr:
http://help.sap.com/saphelp_nw70/helpdata/en/4f/4bc739e033417ae10000000a114084/frameset.htm
Regards,
DL
Maybe you are looking for
-
Is it possible to play games and using apps on TV using Component or Composite cables with ipod touch 4g? Or using universal dock? Or this is only for video?
-
I visited http://www.cs.yale.edu/homes/spielman/ECC/javaMatlab.html Now it's passed 3 days and I havent been able to create my own objects. I try the fist example and it works perfectly. I run this program in Matlab: function [] = Prueba(); wd = java
-
The screen on my mac book air 2011 goes dull when it shouldn't be. Any tips?
Screen on macbook air 2011 goes quite dull even when I'm operating it. It is as if the machine is going to sleep although it shouldn't be doing so. It is a little slow to rouse from this dulled state. Unplugging and re-plugging power socket appears t
-
Retain starting zero in phone numbers ADF
Hi All, I have a phone number field in adf form. Each phone number is defined as a number datatype in the entity objects. When user enters phone number value like 03423535325 it is automatically trimmed to 3423535325. Pelase suggest how do I retain t
-
How I can change my phone languge
I have nokin N 95 8GB ,now I live in china & want to use Chinese dictionary , but I can not use them because my phone don't have any support for the Chinese characters , because there is no Chinese language in my phone so how can I make my phone read