Table for Idoc messages
Hi,
Where I will get the bd87 idoc messages
what the name of the table contain these messages.
Thanks!!
Hi Ramesh,
if you are tracing the idocs through BD87 (idocs in outbound side) , then u can find the corrresponding inbound idocs in the reciever system,use transaction we02 give the outbound idoc numbers and execute , the u can see the idoc numbers along with thier inbound status (for eg 51, 53 0r 64).
Also in bd87 itself u can trace the idocs by mentioning the time and date on which u created idocs.
The status through which ab idoc has passed are stored in EDIDS.
Regards...
Similar Messages
-
Determination of QOS for IDOC messages
Hi,
sending IDOC from SAP to XI, and then to an external system using a JDBC adapter, the QOS for messages is automatically set to EO: anyone knows if it's possible to change this parameter (I need EOIO)? Where can I find documentation about setting/changing QOS?
Thanks for any suggestion.
SimonaI had the same scenario as Simona and at the end it turned out to be pretty simple (if WAS >= 6.40). On the sender system (SAP ERP) in partner profiles -> in the outbound parameters for the message type, you need to check Queue Processing parameter. When you do this an aditionalfield will apear: Rule name. This determines which rule will be used as QueueID. Rules are customized in WE85 where you can assign your own function modules to custom rule names.
Once I assigned appropriate rule (for test I used FIRST_16_OF_MESTYP) xml message was automaticaly set to
<SAP:QualityOfService>ExactlyOnceInOrder</SAP:QualityOfService>
and the message got the QueueID XBQO* (in SXMB_ADMIN).
Again, if WAS is WAS >= 6.40 you don't need to set up IDXQUEUE table.
Regards,
Elvis -
Reg:Table for Custom Messages and custom Messaege Classes
Hi ,
My requirement is to find out all custom messages . so can any one tell in which tables all custom messages and custom message classes are stored .
Thanks & Regards,
Lakshmi.hi,
You can checkthese tables listed below,
T100 Messages
T100A Message IDs for T100
T100C Message Control by User
T100O Assignment of message to object
T100S Configurable system messages
T100SA Application Areas for Configurable Messages
T100T Table T100A text
T100U Last person to change messages
T100V Assignment of messages to tables/views
T100W Assign Messages to Workflow
T100X Error Messages: Supplements
T100ARBGB Application Area
But The main table for storing all the message classes and their numbers are stored in table
T100 -
IDoc Error: No recipient found for IDoc message type in the ALE model...
Hello Experts,
I just created an IDoc for purchase orders and when I try to test it after releasing
the PO, an error is shown in the processing log saying that there are no recipients
found for my message type of the IDoc. I refrenced it against a working IDoc but I might be
missing something.
Hope you can help me guys. Thank you and take care!hi,
in bd64 ,goto change mode select ur distribution model and click add message type define ur logical systems and message type and save.
thn goto environment - partner profiles - f 8.it will show whether model is created or any errors.
then go back edit - model view - distribute.
reward points if hlpful. -
Hi all,
Can any one please give me list of DB tables which are used for XI messages.
Any links, docs, threads would help me
reg,HI,
SXMSPMAST, SXMSCLUP, SXMSPCLUR
the last two are cluster tables
and you won't get XML messages directly from them
have a look inside them
The classes that reads this information in SXMB_MONI are abap classes,
(can be seen at SE24) it is quite difficult to use them,
you might debug SXMB_MONI or use SE30 and see all the classes
that have been used.
You can use value mapping if you are not looking at picking up values from application system.It is just like SM30 transcation.You can get the info under SAP XI->Design and Configuration->Configuration->Value Mapping.
Also see the
these tables,
/SAPDMC/LSOMAP Field Mapping
/SAPTRX/SCAOTMAP
/SAPTRX/SCCNDMAP /SAPTRX/SCEVTMAP
/SAPTRX/SCFUNMAP /SAPTRX/SCSOMAP
/people/udo.martens/blog/2006/02/16/own-logging-of-xi-messages
message-mappings: stored in which database-table?
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
http://help.sap.com/saphelp_nw04s/helpdata/en/44/a1b46c4c686341e10000000a114a6b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ef/45393c3eb3036be10000000a11402f/frameset.htm
Regards
Chilla
<i>reward points if it is helpful..</i> -
Some time ago I created a job which deletes all idocs older than 1 year.
I am asked now to check what is the benefit in term of space(tables, database..)
I wander in which tables idocs are stored(if tables are different for different idocs could you let me know tables for most commonly used)
. However I am afraid (having oracle database) I can not see the benefits as segments/database just grows regardless of empty space.Jan,
Check below links for idoc tables
What is the name of the IDoc table
Re: IDOC Table
Idoc table
Re: idoc
To reduce the Oracle DB size check below link
Re: How to reduce oracle DB's size?
Re: degradated indexes of the table D0101INC
Hope it helps
Thanks
Sushil -
Table for Total messages passed through XI
Hi Experts,
I want count of total messages passed through XI in one day.
At present I am doing it using SXMB_MONI but it is very slow and takes lot of time to calculate.
Anybody knows the table which holds this information, so I can get the information in one shot.
Thanks in advance
ShriThis thread ( Michal's reply ) will point you to the tables in which messages are stored in XI,
In Which Database Table the Messages are Stored in XI
Regards
Bhavesh -
Table for Idoc details including messageID
Hello All.
Is there any table in ECC end , where we can get inbound iDoc details including message ID (which is same as that of Message ID of XI sender system )
I need to find this MessageID information for thousands of IDoc.
Normally we need to open each idoc control structure's Detail tab to find this.
Thanks,
ShivHello Avinash,
I already seen in tables EDIDC and EDIDS but not able to find the message ID details of sender system (XI system ) .
Thanks,
XI team -
Configure retries for IDOC message in BPM?
Hello!
I have a BPM in where I am posting an Idoc to a SAP system. If posting this Idoc goes wrong, I would like to have some retries before I eventually send an alert message. Is this possible to configure somewhere in the BPM? If not, can I configure this somewhere else?
Thanks!
regards Pavelhi,
> I mean if XI for some reason cannot post the Idoc to SAP
depends on what reason
you can reschedule restarts of queues (smq1/smq2)
you can restart SM58
you can restart XI messages
so depending on the error there are many ways to restart automatically
Regards,
Michal KRawczyk -
Hello Guru:
Now the DB table EDID4 is very large ( more than 45 million records ) in our BW system, is there anyway to delete the content of the table but do not harm our BW logic?
The system will read some data from the table when we try to read the monitor.
Thank you.
Best regards,
EricHi,
You can use SAP's archiving (txn SARA) to archive old IDOCs. These can alwasy be restored back into the system if required.
You can select the IDOCs for archiving based on dates to delete IDOCs which are quite old and are not likely to be used.
You can use an archiving job to automatically delete the idocs periodically (say idocs older than six months, the job running every week).
cheers,
Ajay -
Dear experts,
I know that IE messages are stored in table SXMSPMAST
can u pl let me know in which table are the AE messages stored ?
OR is it that AE messages are not stored in ABAP stack tables ?
pl helpHi!
You may try it. If this tool (I do not know it) accesses the database from a "bird's point of view" seeing both ABAP and Java Database Schemas it might work. But if it just can "see" the ABAP DB Schema, this will not work. Please keep in mind: For every DB Schema you will have to authenticate by userid and password. For the ABAP stack it is another user ()and pw) than for the Java stack.
What should work anyway is to access the database from the Oracle Administration Tools on OS level. BUT BE CAREFUL when you plan to modify tables and/or table contents. In case of any problems you may get no or only limited support from SAP.
But again: Try it and tell us if it works ...
Regards,
Volker -
Hi All,
Is there any table in SAP that stores message ids for which alerts are thrown.
My requiremenst is to extract messages for which alerts are thrown.
I found ALXMBALERT , but this does not have any entries.
Thanks
--Pradeep
Edited by: pradeep nellore on Jun 25, 2009 10:14 AM
Edited by: pradeep nellore on Jun 25, 2009 10:15 AMhey pradeep
hope things must be fine at your end
i am sending you link of sdn help "how alert works"
this contains various method of how alert triggers and also contain some report
hope this will help you to achieve your reuirement
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/96/f1033c128f4a7de10000000a114084/frameset.htm
click on the tab triggering alerts under alert category
Thanks
sandeep sharma -
Hi Experts,
I want to know the tables in which the XML messages are stored in Inbound Queue.
Thanks in advance.
MilanHi Shah,
Please check michals reply in this thread:
In Which Database Table the Messages are Stored in XI
Also worth looking at these:
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
Regards.
---Satish -
Idoc Tables for Message segments
Dear Experts,
I was find SAP table for Idoc Message Type for WPUBON for report of Sales Auditor
Plz help
Regards,
Richa GroverHelloRicha,
Message Type Msg
Code Msg
Fn Inbound Event Code Function
WPUBON WPUB IDOC_INPUT_POS_SALES_DOCUMENTS -
Workflow notification is not tiggered for IDoc of message type 'WPUWBW'
Hi All,
I would like to know the setting up of workflow notification for IDoc message type 'WPUWBW' (idoc of different message type is getting notified). Please provide pointers and also the steps for the above issue.
Regards,
PSSHi Ferry,
System checks for the IDOC version and then calls the EXIT if the versions are different .Following is the code snippet that ensures the above thing in include LBD11F0T :
Change IDOC version if target <> current version.
IF F_EXCEPTION-MSGTY IS INITIAL
AND ( F_IDOC_CONTROL-IDOCTP <> TARGET_IDOCTP
OR F_IDOC_CONTROL-CIMTYP <> TARGET_CIMTYP ).
PERFORM CHANGE_IDOC_VERSION TABLES T_IDOC_DATA
USING TARGET_IDOCTP
TARGET_CIMTYP
CHANGING F_IDOC_CONTROL
CHANGED_FLAG
F_EXCEPTION.
ENDIF. "End of if subrc = 0
Have you tested it ? Pls suggest if I am wrong somewhere.
Thanks and Regards
Gurpreet Singh
Maybe you are looking for
-
How to get rss feeds onto the Journe Air 801 via the external memory card?
I've bought the Journe Air 801 digital photo frame and the manual says "save the rss feed of the album you wish to display in the .rss format and add to the external memory card" but it doesn't say how you create this .rss file or copy it onto your m
-
VI containing Event Structure will not receive front panel events in LabVIEW Real-Time.
Hi again, I'm working in my first UI (attached VI). It works when running directly from PC. It doesn't when running from cRIO, there's the message "VI containing Event Structure will not receive front panel events in LabVIEW Real-Time". I've been rea
-
suppose i have this: <example name="myex" type="simple"> This is the example </example> i parse this doc with DocumentBuilder.parse() and i obtain a Document. How can i retreive the sentence "This is the example"? With Document.getElementByTagName("m
-
Publish Bid Invitations.
Hi Guys, need help in the following: 1) What does public bid Inviation mean? My understanding is that we will not have to assign any bidders to the bid invitation and it get published on a portal. 2) How do I publish the bid on a portal - I want to p
-
Insert data from oracle to sql server
we have running R12.1.1 . our company wants to deploy some CRM Application with sql server database. Continuously we have to insert data ( some fields from some tables of Order Management module ) from ORACLE -----------> SQL Server My Questions are