Table for log of attribute/hierarch change run

Hi Guys,
Can someone please tell me the table name where all the attribute/hierarchy change run log is stored? Early reply is highly appreciated. Thanks in advance.

hi Joseph,
what are you going to do with the log ?
attribute/hierarchy change run has no special log table,
it used the same one like other application log, BALDAT and other BAL* tables.
if you want to check the log, you can click 'log' in attr/hier change run screen ? (rsattr)
or view with SLG1, object RSSM, sub object MON.
specify date.
to delete log, you can use SLG2.
hope this helps.

Similar Messages

Attribute /hierarchy change run

Hi,
I have to run the Attribute/Hierarchy change run for only one infoobject. When I click on "Infoobject list", the list is empty even though some changes were made in the hierarchy. How can I get the infoobject list?
Thanks.

Hi.......
The easiest method is ........use the Program : RSDDS_AGGREGATES_MAINTAIN.........there give the infoobject name.........Then in the top Program tab >> Execute in background...........then u can monitor the Job in SM37........the job name will be RSDDS_AGGREGATES_MAINTAIN..........
But logically if changes has done to the Master data......Transaction RSA1 --> Tools --> Apply Hierarchy/Attribute Change... --> InfoObject List & Hierarchy List ............this List should contain the list of infoobjects.............if nothing is there..............it means no changes has been done.............and there is nothing to be activated............So also check whether the changes hav been done properly or not.....................then use this program............it should be done........
Regards,
Debjani......

Attribute / Hierarchy Change Run and BWA Index

HI!
During my analysis to the perocess chains in our BW/BWA systems, I noticed that Change Run either rollup or update BWA indexes. I am not sure what Change Run exactly does for the indexes, so if you please can help in that it will be great. because we are inpecting that this may caused us a failure in BWA indexes before.
Thanks,
Ghassan Matar

Hi,
Kindly go throught the following link to more about the Hierarchy/Attribute Change Run in BWA indexes,
http://help.sap.com/saphelp_nw70/helpdata/en/9a/e1914206d7a970e10000000a155106/frameset.htm
Regards,
Balajee

Table for Demands and Supplies after CTM run

Hi Gurus,
I want to get number of demands and supplies after CTM run .
I can see these details from opt11 . But i want to use these data points further for a custom developments .
So please let me know , in which table these entries sit ? There has to be a standard table for the same .
Regards
Bhupendra

Vikas,
You can also improve changing the data points in CTM global setting /SAPAPO/CTMCUST...
Enable check box : Asynchronous Update and Define appropriate Packet Size and also update
Package Size for Creating Orders
Package Size for Creating Pegging Rels
Package Size for Order Selection
Below example illustrates the improved performance by enabling check box : Asynchronous Update and Define appropriate Packet Size
If you set the indicator, CTM first plans the number of demands
specified in the Package size field. Then the system creates the
corresponding orders in the liveCache. At the same time, CTM continues
with the planning for the remaining demands.
If you do not set the indicator, the system first plans all demands and
then creates the orders in the liveCache.
Example
You want to use the asynchronous liveCache update for 20000 demands.
Enter 1000 as the package size. The system attempts to fulfill the first
1000 demands. The orders for these demands are created in the liveCache,
whilst CTM planning continues for the remaining 19000 demands."
We had similar issue and CTM performance improved significantly after updating the above setting.
Thukral

System Tables for Logs

Does anybody know what system tables store the logs displayed in ST22 and SM37? Trying to programmatically read and display the logs.
Thanks a bunch for your help.

Hi,
These are tables for Job scheduling
Once jobs are defined, they are stored in the R/3 database, in the following principal tables in the background processing system:
TBTCO: The job header table (job management data)
TBTCP: The job step table (individual processing steps in jobs) -to describe the detailed level for each job.
TBTCS: The control table for the time-driven job scheduler

Tables for char and attributes

Hi ,
How to identify that a characteristic for an inspection lot has long term characteristics ?
We want to retrieve the characteristic attributes for qualitative characteristics . What is the table link for the qualitative characteristics and the characteristic attributes ?

Check following thread--->
Control Indicator field in Inspection plan characteristics
for tables
Results Recording QAKL Results table for value classes
Results Recording QAMR Characteristic results during inspection processing
check bapi
BAPI_INSPCHAR_GETRESULT
Edited by: Sujit Gujar on Mar 15, 2011 9:35 PM

Tables for the marketing attributes

Hi Experts
I want to know in which table marketing attributes data are saved
sri

Sri,
The easiest way to retrieve this data is the following:
Use the function module CRM_MKTBP_READ_BP_DATA to get the values set for a particular business partner. You will need to pass in the guid of the business partner and the name of profile set The exporting parameters should be IV_BP_GUID and IV_PROFILE_TEMPLATE_ID respectively.
You will then get a table returned called ET_ALLOCVALUES to retrieve those values.
To get the "meta-data" of an attribute set you can call the function module CRM_MKTPFTPL_READ. You will need to pass in the attribute set name and then you will receive the ET_ATTRIBUTES which contains the meta data for that attribute set.
This method is a lot eaiser than trying to read the tables directly in system, which is a really not a good idea in CRM, as you should use the BAPI's/API's instead.
To update attribute set values for a business partner use the function module:
CRM_MKTBP_CHANGE_BP
Take care,
Stephen

Difference between Activating Master Data and Attribute Change Run

Hi
Is there any difference between Atribute change run and Activating Master data functionaaly???
if wha it is???
can any one explain clearly?
Thanks
Chinna

When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
When u create a characteristic and if u keep it as master data and activated..it is master data activation
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
2. Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

Attribute change run error in daily job (BI 7.0 SP 23)

Hi All,
We are facing an Attribute Change Run error in one of our daily batch job.we donnot see any locks in SM12.and a dump occurs in ST22.we also donnot have any master data load running at that time .We executed the the FM RSDDS_AGGR_MOD_CLOSE,but the Change run error occurs frequently .How to get the root cause of this issue as we donnot have any master data load running at that time.
regards,
maria

If you are sure that your master data is 0MATERIAL then GOTO-RSA1>Tools in Top>Select Attribute Hiearchy Change Run>Select Info Object List>Select 0MATERIAL>Execute.Then message "Attribute/Hierarchy change run scheduled" will appear in the Tab on your User ID.Once its finished your masterdata is activated.
For Activate Master Data we can do another method like "Right click on the particular Infoobject which need to activate and click "Activate Master Data".
The above steps is for manual activation of master data changes..
If you want to automaize the above steps "Need to add Attribute/Hierarchy Change Run" in the process chain.When execution of Processchain it will activate all the master data in the list one by one and also realign the Aggregates which using the master data objects.

Error in Change Run for 0cust_sales

Hello Experts
In master data load process chain for 0cust_sales it fails at change run step.
with ABAP error short text "Exception condition "TREX_ACCESS_ERROR" raised."
and error analysis
" A RAISE statement in the program "CL_RSDDTREX_TABLSERVICE=======CP" raised the
exception
condition "TREX_ACCESS_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls."
Please help me understand and resolv issue here
Thanks in advance.
Regards
Sudeep

Hi,
This seems to be related to BIA.
Please check the below thread & link.
[Attribute Change run was terminated;
[http://help.sap.com/saphelp_nw2004s/helpdata/en/6b/cda64246c6c96ae10000000a155106/content.htm]
Regards
Vishal

Change run for Compounding infoobjects

Hi Experts,
I need a solution.My question is that do we have any option like attribute change run for compounded infoobjects.Ex.Componding change run??.
Issue is that.I have Characteristic infoObject ZBOMM i.e for Bill of material.It has attributes and compounded infoobjects.The componded infoobjects are 0plant and 0material.We know these compounded objects acts as an primary key for ZBOMM infoobject.When the changes happen for attributes,because of attribute change run it over writes all attributes of ZBOMM which will be available for reporting.But when it comes to compounding infobjects (0plant and 0 material) it will retain the old data and also reflects the new changed data.this is shows double entry in reports.I want the old data not to be present as it happens for attributes.
Is there any solution for this problem?.
Please let me know.
Thanks and Rgds
ACE

Hi!
Run RSDDS_AGGREGATES_MAINTAIN for 0plant and 0material.
Hope it helps!
Adwin

Attribute change run---imp--urgent

hi experts,
when i am trying to run attribute change run for master data infoobject, always it gets cancelled, the reason system shows for cancelled attribute change run is <b>"Hierarchy/Attribute change cancelled (protocol/Shortdump)"</b>
what is the reason for this and secondly when i try to do the manual activation of that particular infoobject, it gives a pop-up window saying " The infoobject XXXX is already active" which means that though we are doing the manual activation, it is not doing the activation. Why i am strong in saying this is beacuse there were new records entered into that infoobject and after the data loading when i activate it manually because attribute change run is not running successully, it shows that infoobject data is already active.
why is it so ? what could be the reason?
would appreciate your quick responce

Hi,
Are you able to schedule the Attribute change run from Tools-> attribute Hierarchy change run? I hope you still able to see your Info object in the list.
Check the shortdump. May be you can find a clue as sometimes some aggrgetaes cause problem while adjusting. If you find such aggrgeate, deactivate it and run teh change run.
You can also check in the Attribute change run monitor. There also youw ill find clues as which aggrgeate is causing the problem.
Regards
Srini

Attribute Change Run Process

Dear All,
I have scheduled a Process Chain Run in BI7. All the Process has run successfully. But there is some problem with the Attribute Change Run.
At the start of the Process Chain all the colors of Process was green and gradually all the Successful process is turning from Green to Normal Color,but in the attribute process change run the Green color is not yet gone. So i am not getting any idea if my attribute change run has run successful or it is still running?
Plz help

Hi Anup,
What is the status of the attribute change run for your infoobject? whether it is successful?
If it successful then no issues. The attribute change run happened.
coming to process chain. there might be some problem in updating the process chain coloring.
Dont worry about the process chain coloring just chk whether the described job is completed or not.
orelse chck in SM37(background jobs) so that you can know whether the process event attribute change run happened or not?
Rgrds,
Ravi

Problem with hierarchy change run in aggregates

Hi,
I have made changes in Cost center hierarchy (infact I have included 2 cost centers in a seperate node). After it I loaded hierarchy into BW through Process chain. Process chain uses Attribute/hierarchy change run process. Consequently Cost center hierarchy is loaded into BW successfully.
In Cost center master data, hierarchy table, i can see two new records for these added costcenters in Active status. It means hierarchy change has worked properly.
I have also read that hierarchy change run automatically reflects the changes in Aggregates, that are using Cost center info objects.
But my problem is I did not find new added cost centers in any aggregate using cost center info object. Though it should be taken care by Attribute/hierarchy change run.
Please suggest, if I make any change in source system hierarchy, then how and when it will impact aggregates ? How can I test that hierarchy change has impacted aggregates ?
Thanks and Regards
Saurabh

Hi Fede
Did you manage to solve your problem?
I have a similar situation where the technical ID of the hierarchy is set as default value for the hierarchy variable in the variable input screen.
I have noticed that if I un-check the option "Suppress 'Unassigned' Node" in the Hierarchy Attributes Settings in RSH1, then the default value is gone, but I would like to have it checked in order not to display the unassigned nodes for the end users.
Any help or comments on what you have done to overcome this problem would be jhighly appriciated.
Thanks.
Regards
Peter

Continuation of aborted change run failed in BW 3.5

Hello experts,
everytime when an attribute / hierarchy change run has been aborted (by means of unexpected runtime errors) I failed in starting it next time. Error RSENQ 2 ("Lock not set for: activation of hierarchy") occured in this case. I found a way to overcome this by manually setting flag CLOSEDFL = X in table RSDDAGGRMODSTATE.
Now I found SAP note 903886 which forbids to do so by reason of potential inconsistencies.
Does anybody know how to handle the specified situation in a right way?
Thanks in advance for your help,
Oliver

Hello Shabar,
I implicitly postulate that the reasons for the failure always have been detected before trying once more.
For example, implementing a wrong SAP note (1006192) caused runtime errors. After resetting the note implementation the error disappeared.
Sorry, this was not my question!
The point is that change run failes as long as the flag has not been set in RSDDAGGRMODSTATE even if the reason for the failure has been fixed.
Yours,
Oliver

Table for log of attribute/hierarch change run

Similar Messages

Maybe you are looking for