Table for manage cube
Dear Experts
I need to find out what table stores the information for Selection Conditions in RSA1 > right-mouse-click on cube> Manage .
Its now invisible even though invisibility is not turned on.
Please advise. Thanks.
regards
Pascal
Dear Venkatesh
I found that the table RSBKSELECT can show only the DTP selection for some DTP of the same staging but not for other DTP selections using slightly different routine logic for the same field.
What I meant is, not all request IDs in the cube I can find the selections from the table.
Is there a constraint?
Thanks.
Regards
Pascal
Similar Messages
-
hi,
I am designing a stock cube with non-cumulative values.
Data for amounts of stock movements I plan to get from Transfer Order documents.
Data will be extracted on daily basis and in cube I want to have among others following chars: quant, storage bin, storage type and warehouse nr.
I would like to include in validity table such all of chars mentioned above (i.e. quant, storage bin, storage type, warehouse nr and date).
I am wondering is it ok to include so many chars in this table. Are there any guidelines for designing this table?
Can you suggest any documentation?
Regards,
AndrzejYou can use RSDG_CUBE_VALT_MODIFY report for this.
See:
http://help.sap.com/saphelp_bw31/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/content.htm
Also take a look on notes:
360249
534865
419490
Regards -
How to View master data & Trasaction data tables for Puchasing Cube
Hi BW masters,
How should I check which tables (Master data tables and Transaction data tables) are involved with Business Content Cube(Purchasing data 0PUR_C01). I would like to know this information in order to go to that table and browse the data in that table. Where should we go and check this out.
I will reward the points for the good answers.:-)
Thanks
Syed.hi Syed,
to view tables' content you can use SE16,
you can try infocube name, dimension tables of cube are store in *d[infocube name]1 to F, fact tables are f[infocube name] and e[infocube name]-compress,
infocube data are stored in star schema, you can use LISTCUBE to view the content (to see the structure/tables in cube, use LISTSCHEMA),
master data (not time-dependent) are stored in text table t[infoobject name], attribute - p[infoobject name] and hierarchy - h[infoobject name],
take a look bw multidimensional data modeling for detail
http://help.sap.com/bp_biv235/BI_EN/documentation/Multi-dimensional_modeling_EN.doc
hope this helps. -
Hi guys,
im trying to activate a cube, but the process fails, saying there was no primary key for the table /BIC/L<CubeName> .
Now i wonder what kind of table that is. Is there any complete List of tables for Cubes? I know about those:
/BIC/F<CubeName> Fact table,
/BIC/E<CubeName> compressed Fact table
/BIC/D<CubeName>T Time dimension table
/BIC/D<CubeName>P Requenst dimension
/BIC/D<CubeName>U Unit dimension
/BIC/D<CubeName>1 User dimension 1 and so on
/BIC/L<CubeName> ????
What is the purpose of table L? Are there any other important tables for the cube?
cheers...Hi,
This is the validity table. which is /BIC/L(cube name). If u have any non cumulative key figures then a validity table will be created for the same. But am not sure about the error.
Khaja -
The table for storing data for infocube and ODS
Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit. -
How to identify the source column and source table for a measure
Does anyone have a query that I can use to positively identify the source column and source table for a cube measure in an SSAS cube? Visual Studio shows ID, Name, and Source, but it is nearly worthless in a large cube and database.
Also - the same for a dimension would be great.
If no query exists for this, can someone please explain how to find the source column/table for a measure and for a dimension?
Thanks.DMVs don’t expose the DataSourceView content. AMO is much better suited for object model operations like
this than the DMVs. PowerShell is also sometimes an option, but in this case C# code would be much easier because analyzing the contents of the DataSourceView is much easier using the .Net DataSet class.
Hope this helps.
Reeves
Denver, CO -
How to find rows in F table of a cube for a given request ID
Can someone tell me how to find the rows in the F table of a cube for a given request id?
Hi,
Copy the Request ID number of that cube and go to manage of the cube and select contents tab, select Infocube content,
select list of objects to be displayed with results and in that screen give Request ID at Request ID row and at bottom Max no. of Hits keep blank and execute at the top.
this will display all the data rows loaded with that request. this is records from cube.
from Fact table, go to SE11, give /BIC/FXXXX "XXXX" is cube name for custom cube.
get the SID of that cube from the Cube contents as mentioned above, for field select for output along with Request ID select Request SID also.
from SE11 give table /BIC/DXXXXXP "XXXX" is cube name for custom cube. P for Packet Dimension. here pass reqest SID in 'SID_0REQUID' and get value for DIMID.
pass this DIMID into KEY_XXXXP, this give the fact table rows for that request DIM ID.
hope this helps
Regards
Daya Sagar -
Why no table for Line manager in SAP HCM
Hi ,
I am a ABAP technical consultant , I am aware about the program and Function modules required for fetching an employees line manager . My question is why SAP has not made a table for line manager info . As every time I need that info I put in redundant coding efforts to fetch that details . I would like to get your views on this one .
Thanks
Gaurav DeepHi Gaurav Deep,
I think it would be too easy if there would be direct table for finding line manager Seriously speaking I think SAP HR is clever compared to other modules using the object-oriented concept. When relationship between position and person is updated standard function modules find the new line manager without going to specific table. Maybe if other modules would have as clever built we wouldn't have that many tables in SAP? My favourite function module in HR is RH_STRUC_GET. If you can't find fitting evaluation path to return what you want to get then it is easy to create one in tcode OOAW.
cheers, s -
Help required in finding out the tables for FS-Claims Management module
Hi All,
In FS - claims Management module, i need to find out from which tables we can fetch the following fields,
INSURED : insured person
DESCINSURED : Description of insured person
CLAIMANT : person eligible for benefits
DESCCLAIMANT : Description of insured claimant
OUTSTRES : Outstanding reserve
PAID : paid amount
INCURRED : paid amount + outstanding reserve LOSSDESC : loss description
Thanks & Regards,
AnilHi Anil,
I was searching for the fields you mentioned using SE15 and came up with lot of hits. I thought, it would be good if you do the same thing and you can find the relevant tables as might you have good idea in this area.
I will tell you the procedure and I hope it will give you good results.
1) Go to SE15 (Repository Info System)
2) Click on "ABAP Dictionary"
3) Click on "Fields"
4) Select "Table Fields" and enter description as "insured" on the right hand side panel with Application component as "FS"
5) Click "Execute" (F8) and you will lot of hits.
You need to search through it to find relevant tables for your purpose.
Hope this will give you an idea.
Regards,
Vicky
PS: Award points if helpful -
Missing content for inventory management (cube 0IC_C03)
Hi everybody,
I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
How can I find this missing content. We are using BI Content Release 704 Level 1.
Thanks for your help!
ThomasHi Oscar,
unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
Thanks in advance!
Thomas -
Tables for Collection, dispute and credit management
Hi SAP Gurus,
I would appreciate if any one could provide the list of tables for collection, dispute and credit management. Thanks!
Regards,
ajI think you mean the tables for FSCM.
The easiest way to find it is to do SE16 FDM*
FDM_AR_WRITEOFFS FSCM-DM: Automatic Write-Offs Not Executed
FDM_BUFFER Cluster for Decoupling in 1-System Scenari
FDM_BW_INV_DELTA Delta Queue for BI Invoice Extractor
FDM_COLL_CCOLOAD Company Codes for which Initial Load Perfo
FDM_COLL_CFIELD FSCM-COL: Relevant Fields for Document Cha
FDM_COLL_COMPCOD FSCM-COL: Active Company Codes of Collecti
FDM_COLL_DUNNLEV Harmonized Dunning Levels
FDM_COLL_LASTPAY Last Payments of Business Partner
FDM_COLL_LTRIG Missing Entries of Table FDM_COLL_STRIG
FDM_COLL_SFIELD FSCM-COL: Relevant Fields for Document Cha
FDM_COLL_STRIG FSCM-COL: Control of Trigger Update in TRO
FDM_COLL_TROBJ FSCM-COL: Trigger Table for Collections Ma
FDM_CONTACT_BUF Personalization of Contact Person Data
FDM_DCOBJ FSCM-DM Integration: Disputed Objects
FDM_DCPROC FSCM-DM Integration: Dispute Case Processe
FDM_P2P_ATTR Attributes of Promise to Pay; Required for
FDM_PERSONALIZE Personalization of Collections Management
FDM1 Cash Management & Forecast: Line Items of
FDM2 Cash management line items from MM purchas
FDMV Cash Planning Line Items of Earmarked Fund
Hope this helps, award points if useful. -
Documentation on Interface tables for lease management
Hi i found out the following interface tables for lease management
but couldn't find any documentation or information of the mandatory columns to be populated in these tables
is there any documentation provided in R12 for the following tables?
PN_LEASE_OPTIONS_ITF
PN_RENT_ROLL_LEASE_EXP_ITF
PN_SPACE_ASSIGN_LEASE_ITF
PN_SPACE_UTIL_LEASE_ITF
thanks
Arshadhi
thanks for quick reply...
etrm is more generic..
i would like to know the validations that are performed on the columns
the concurrent programs which does the import of data from these tables to base tables
something which oracle provides for interface tables in their user guides or implementation guide. (Example for GL_INTERFACE the column level validations are given in GL user guide).
i couldnt find such document for lease management.
thanks
Arshad
Edited by: Arshad on Dec 2, 2008 7:24 PM -
Where to see dim and fact table names for a cube.
Hello Experts,
Where to see dim and fact table names for a cube.Do a wild character search with the cube name (with '*' on both sides of the cube name) in transaction code SE11 or LISTSCHEMA...
For Eg : Cube Name is ZFIN_C111
Goto transaction code SE11
Tables - ZFIN_C111 & then F4 would give you all the associated tables for the InfoCube. -
Status control table - 'Perform update for status control table for cube '
Hello Experts,
While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
What is status control table ? and can I have some inputs as to how to solve this issue
Regards,
arjunHi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap -
Tables for Qurey names and cube
hi,
I want to know the list cubes against each query.
can any one tell me what are tables for the folllowing
1) to get list generic queries avalible .?
2) cube against each of that query?
3) Data source against each cube?
4) generic web templates against each query?
regards
LaxmanHi Olin,
RSZELTDIR: filter by: OBJVERS = 'A', DEFTP: REP - query, CKF - Calculated key figureReporting component elements, query, variable, structure, formula, etc
RSZELTTXT: Similar to RSZELTDIR.
Texts of reporting component elementsTo get a list of query elements built on that cube:RSZELTXREF:
filter by: OBJVERS = 'A', INFOCUBE= [cubename]
To get all queries of a cube:RSRREPDIR: filter by: OBJVERS = 'A', INFOCUBE= [cubename]To get query change status (version, last changed by, owner) of a cube:RSZCOMPDIR: OBJVERS = 'A' .
Web templates
RSZWOBJ - Storage of the Web Objects
RSZWOBJTXT - Texts for Templates/Items/Views
RSZWOBJXREF - Structure of the BW Objects in a Template
RSZWTEMPLATE - Header Table for BW HTML Templates
Regards
KP
Maybe you are looking for
-
Data selection in info package using ABAP routine.
Hi, when we are scheduling the info package(Infp package name is like XYZ),we want to load past 6 months data from the current date(INFO OBJECT(0CREATEDON) BETWEEN (Sy-Datum - 6 months TO Sy-Datum),in the selection tab in schedule i want to write t
-
ISync won't even launch- MacBook
I just got a lovely Macbook 17" It's perfect but for one thing- I can't get my Palm Zire 31 to sync with the macbook, and I suspect this has something to do with the fact that iSync won't even launch. It bounces a few times, and then nothing when I a
-
Can't get to slideshow module in 1.3
I can't get to slideshow module in 1.3 "an error occurred when attempting to change modules". I am running Leopard 10.5.1. Can anyone help? Dan
-
Bapi's for creating Maintenance order in IW31 with notification
Hi All, Is there any bapi's for creating Maintenance order with Notification number in the transaction iw31. Also is there any bapi's for creating measurement document. Points will be awarded. Regards, vinoth
-
[iPhone 2.x] How to set text of a label from another classfile?
I've a iPhone application (tabbar application) with some UIViewControllers. Per UIViewController i've created another .xib file. In one of the .xib files, i've created an UIView with an UILabel and created an outlet called "lblStatus" and connected i