Table for Material and Inspecton lot together?

Dear SAPIENTS,
Please tell me table for Material and Inspecton lot together.
Regards,
Kaushal Rai

Hi Kaushal,
- Run trx QA08.
- Select the option Activate inspection type. (This tab should be green)
- Enter material type at least to not have a junk of data at a single execution. You can set other fields as per your requirement.
- Check the Box "Assign Inspection type", Don't check/activate any of the rest three
- Enter the inspection type, here is an limitation you can know the status inspection type by type.
- Execute.
- The system will give you the list of the materials that are note activated for the inspection type you feed in the selection screen.
Hope it satisfy you. at the other way me and you both will search for the better option.
Regards,
Shyamal

Similar Messages

  • Table for material and classification

    Hi Experts,
    I have a list of materials and I want to know if those materials has a classification tab in MM03. Is there any table where I can check it?because I have a bulk of materials to be check.
    Thanks.
    Ellen

    Hi,
    Below are the table list for Classification,
    CABS Result of the Statistical Analysis of Table AUSP
    CUFM Customising: Class/Config: Screendesigner Form
    TCME Validity for Global Characteristics
    KLAH Class Header Data
    KLAT Classes: long texts
    KSML Characteristics of a Class
    AUSP Characteristic values
    SWOR Classification System: Catchwords
    KSSK Allocation Table: Object to Class
    TCLG Class groups
    Aprt from this tabels you can find Classification status of Materials by use of T.code Cl24N , CL30.
    Regards,
    Dhaval

  • Tables for production order number for material and Batch combination

    Dear Experts,
    Please suggest the table names for finding the production order for material and batch combination .
    Thanks in advance for your help...
    Best regards
    Nitishj

    Dear
    Please check in  AFPO-CHARG
    AFPO          Order Item Detail -Batch Number -CHARG
    AFFW         Confirmations -- Goods Movements w
    AFRD          Confirmations -- Defaults for Collective Confirmation
    AFRH          Confirmations -- Header Info for Confirmation
    Regards
    JH

  • Taking long time filling the setup tables for sales and shipment

    Hi ,
    I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
    It took 16 hours just to bring 6 months of  sales history  data in the test environment .
    Cn anybody help on this issue why it is taking that much of time ...
    I am trying to  load the sales data from R/3 into APO-BW from 2005 to 2007 .......
    It is taking 16 hours to fill the data for only 6 months .

    Hi,
    1. delete data and refill the setuptables again by spliting to several small pieces.
    2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
    you need to check with PSA and base tables.
    keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
    correct if i'm wrong.
    either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
    User exit not a good solution. it's one possibility.
    ****Assign Points If Helpful****
    Regards,
    Ravikanth

  • BAPI or FM for Material and ChapterID Combination(J1ID Transaction)

    Dear All,
                    I need BAPI or FM  for Creation of Material and ChapterID combination. I dont need for other options present in J1ID Transaction.
    I cannot use Insert statement  for Material and ChapterID  Creation  as it contains only few fields.
    Please let me know regarding this.
    Regards,
    Anilkumar

    Hello
    The bapi BAPI_INSPECTIONPLAN_CREATE is used for creation. There you can assign several materials through structure MATERIALTASKALLOCATION (BAPI1191_MTK_C). There is no bapi for modifications so you can assign other materials using LSMW or BDC as Gururaj told you or in this special case populate table MAPL directly (better talk to your ABAP to decide it); I did it without issues and I checked and the function CZ_VB_MAPL_POST could update the information you need (talk to your ABAP to validate it).
    Best regards
    Carlos Díaz

  • Pricing table for Material pricing Group

    Hi everyone
    I have a problem related to pricing. In ECC, if we create a condition table for material pricing group, assign it to the Access sequence PR00 and then download the customizing data to CRM, the access sequence appears in CRM but without this table.
    Could you please provide any clue to this??
    Also, I had created another table with the Material/Material Prc Grp, assigned it to another Z-Access sequence and assigned the access seq to a Condition type. Again I had downloaded the customizing and in this case, only the Condition type has arrived. Neither the access sequence nor the table has come.
    Could you please guide me as to what needs to be done??
    Please help!!
    Regards
    Debolina

    Hello,
    Please check your replication object e.g. DNL_CUST_CNDALL and see if you have filters defined there.
    You might have put filters which are preventing the download.
    Also, you have to define the new field mappings in CRM before you download the tables.
    V_CND_MAP_CNVFLD (transaction SM30).: This view contains the mapping between R/3 data structure (maintained in CND_MAPT_ACS_REM_CUST) to CRM data structure (Field Catalog).
    The relationship between R/3 field names and CRM field names must be defined in either  CND_MAPC_CNV_FLM or CND_MAPM_CNV_FLM
    Let me know if still issues.
    Koshal

  • How to fill up set up tables for 2lis_03_UM and BF?

    Hi,
    I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
    Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
    OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
    please help.
    thanks

    Hi,
    I think you can follow the same procedure.  After completion of setup table filling you can check the result in RSA3.
    In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM

  • Table for Customer and vendor open balance on a key date

    Dear All,
    Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
    I have checked with the below table :
    Customer-KNC1, KNC3,BSID, BSAD
    Vendor-LFC1, LFC3, BSIK, BSAK.
    But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
    Plesae let me know, how to go for it.
    Please suggest.

    Hi
    Use BSID and BSIK for open items
    And pass company code, year and from date and to date range in Posting date selection option
    Reg
    Vishnu

  • MB5L Report Discrepacy for Material and Stock Account Currency

    I have found in the MB Report Discrepancy for Material and Stock Account Currency. Why is this happening? Why is there a variance between total price in materials and stock account? Anyone please help me. I'm abaper but now been pushed to do logistic. I need help for this issue.

    Hi,
    Here's some information from help. Variances can occur for the following reasons:
    You have entered postings to the stock account manually.
    The stock account includes not only stock postings, but also other postings. In this case, you should check the account determination in the Customizing for Valuation and Account Assignment. Make sure that the stock accounts are used solely for the transaction key BSX (stock postings).
    Check Account Determination - OMWB
    The account assignment for the stock accounts (transaction key BSX) was changed during productive operation; the respective stocks, however, were not deducted from the old account (movement type 562) and posted to the new one (movement type 561).
    Cheers !

  • Need table for customer and vendor carry forward balance

    Hi,
    I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
    I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
    Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
    Thanks in advance.
    Regards,
    Swati

    Hi Gurus
    The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
    Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
    and my 2nd query is how to get these opening balance in Z report, at Header Level.
    Thanks and Regards
    Dnyanesh

  • What are the T-codes that contain the master data for material and vendor?

    what are the T-codes that contain the master data for material and vendor?

    hi ,
    - Display Material  tcodes...
    MM01 - Create Material
    MM02 - Change Material
    MM03 - Display Material
    MM50 - List Extendable Materials
    MMBE - Stock Overview
    MMI1 - Create Operating Supplies
    MMN1 - Create Non-Stock Material
    MMS1 - Create Service
    MMU1 - Create Non-Valuated Material
    ME51N - Create Purchase Requisition
    ME52N - Change Purchase Requisition
    ME53N - Display Purchase Requisition
    ME5A - Purchase Requisitions: List Display
    ME5J - Purchase Requisitions for Project
    ME5K - Requisitions by Account Assignment
    MELB - Purch. Transactions by Tracking No.
    ME56 - Assign Source to Purch. Requisition
    ME57 - Assign and Process Requisitions
    ME58 - Ordering: Assigned Requisitions
    ME59 - Automatic Generation of POs
    ME54 - Release Purchase Requisition
    ME55 - Collective Release of Purchase Reqs.
    ME5F - Release Reminder: Purch. Requisition
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MBRL - Return Delivery per Mat. Document
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB1B - Transfer Posting
    MIBC - ABC Analysis for Cycle Counting
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI21 - Print physical inventory document
    MI04 - Enter Inventory Count with Document
    MI05 - Change Inventory Count
    MI06 - Display Inventory Count
    MI09 - Enter Inventory Count w/o Document
    MI34 - Batch Input: Enter Count
    MI35 - Batch Input: Post Zero Stock Balance
    MI38 - Batch Input: Count and Differences
    MI39 - Batch Input: Document and Count
    MI40 - Batch Input: Doc., Count and Diff.
    MI08 - Create List of Differences with Doc.
    MI10 - Create List of Differences w/o Doc.
    MI20 - Print List of Differences
    MI11 - Physical Inventory Document Recount
    MI07 - Process List of Differences
    MI37 - Batch Input: Post Differences
    for vendor..
    XKN1  Display Number Ranges (Vendor)
    XK01  Create vendor (centrally)
    XK02  Change vendor (centrally)
    XK03  Display vendor (centrally)
    XK04  Vendor Changes (Centrally)
    XK05  Block Vendor (Centrally)
    XK06 Mark vendor for deletion (centrally
    XK07  Change vendor account group
    XK11  Create Condition
    XK12  Change Condition
    XK13  Display Condition
    XK14  Create with cond. ref. (cond. list)
    XK15  Create Conditions (background job)
    reward points if useful,
    venkat.

  • How to find R/3 table  for FI and PS Datasources

    Hi,
    Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
    Thanks
    Shanthi

    Hi,
    To find DS assigned to a table.
    How to find the Datasources for the given table names ?
    How to find the Datasources for the given table names ?
    To find Tables assigned to a DS.
    USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
    switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
    retrieve data and present it to you.
    Note: Set the break point in the Extractor Function module.
    View the ST05 Extended Trace list. The Object name shows the Tables accessed.
    Thanks,
    JituK

  • Function modules for material and description

    Hi,
    Pls let me know the function module for material and description.
    Regards,
    Bala

    Hi,
    Please use FM: MD_MATERIAL_GET_TEXT
    Reagrds
    Raju

  • Source tables for forms and tabular forms must have a primary key.

    Why does HTML DB 2.0 return the message
    "Source tables for forms and tabular forms must have a primary key."
    when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
    It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
    bw - Christian

    Christian,
    In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
    Regards,
    Marc

  • UWL Integration for Material and Customer Repositories

    Hello all,
    Has someone done the UWL Integration for Material or Customer repositories? Do we have to write own XML Configuration file for UWL and upload? or is that supplied by SAP somewherer for Material and Customer repositories?
    Any pointers in this direction are highly appreciated.
    Thanks
    Suman

    Hi Suman,
    You can create your UWL Configuration file through UWL Cofiguration file wizard.
    The path is navigate to System Administration  System Configuration   Universal Worklist – Administration.
    Under Universal Worklist Content Configuration select Click to configure item types and customize views using a wizard.
    Thanks
    Namrata

Maybe you are looking for