Table for material data tab
HI,
what is the table for material data tab in PO?
Regards,
Data at item level i.e. may be material data, invoice data is stored in EKPO.
Regards,
Sarang
Similar Messages
-
ECC table for material date information ?
Is there any table in ECC where i can find out the last sale date of Material and Last recieve date of material ?
I was trying to find out the dates from mseg table ..but couldn't get is so far .
could you please help me .We have to show the below fields in our report .
Coulmns -
Company Code
Plant
Product Heirarchy
Supplier Code
Material
Material Type
Stock Setting
Last Receipt Date
Last Sale Date
Rows -
Quantity on Hand
Average Cost
Total Sales
Total Cost
PLease suggest me which , datasource / Cube we can used for this ? -
Table for Material and Inspecton lot together?
Dear SAPIENTS,
Please tell me table for Material and Inspecton lot together.
Regards,
Kaushal RaiHi Kaushal,
- Run trx QA08.
- Select the option Activate inspection type. (This tab should be green)
- Enter material type at least to not have a junk of data at a single execution. You can set other fields as per your requirement.
- Check the Box "Assign Inspection type", Don't check/activate any of the rest three
- Enter the inspection type, here is an limitation you can know the status inspection type by type.
- Execute.
- The system will give you the list of the materials that are note activated for the inspection type you feed in the selection screen.
Hope it satisfy you. at the other way me and you both will search for the better option.
Regards,
Shyamal -
Material field not getting displayed on Material Data tab in ME51n or ME21N
Material Field was missing in ME51n/ME21n.
I went into SPRO ->PReq-> Define Screen Layout at Document Level and checked Optional for Material field. Now it's showing up on the ITEM overview section of the Preq.
But its still missing on Material Data tab in ME51n or ME21N but I can see the Material field on the Item Overiew section of the Req/PO Screen.
Where exactly do I make the settings for the item level in SPRO?We use the Enjoy screens and document types for ME51N/ME21N pretty much out of the box. We do not have the material master number on any of the detailed item tabs either. I do not think you can show it in the details unless you activate the customer specific fields tab.
Regards -
Hi all,
if you know any tables for contract data(For Contract report),
please tell me.....
Thanks,
kishore.VBAK-contract header
VBAP-contract item
VEDA-changed contracts
KONV-condition records
MARA-material related to contract -
Pricing table for Material pricing Group
Hi everyone
I have a problem related to pricing. In ECC, if we create a condition table for material pricing group, assign it to the Access sequence PR00 and then download the customizing data to CRM, the access sequence appears in CRM but without this table.
Could you please provide any clue to this??
Also, I had created another table with the Material/Material Prc Grp, assigned it to another Z-Access sequence and assigned the access seq to a Condition type. Again I had downloaded the customizing and in this case, only the Condition type has arrived. Neither the access sequence nor the table has come.
Could you please guide me as to what needs to be done??
Please help!!
Regards
DebolinaHello,
Please check your replication object e.g. DNL_CUST_CNDALL and see if you have filters defined there.
You might have put filters which are preventing the download.
Also, you have to define the new field mappings in CRM before you download the tables.
V_CND_MAP_CNVFLD (transaction SM30).: This view contains the mapping between R/3 data structure (maintained in CND_MAPT_ACS_REM_CUST) to CRM data structure (Field Catalog).
The relationship between R/3 field names and CRM field names must be defined in either CND_MAPC_CNV_FLM or CND_MAPM_CNV_FLM
Let me know if still issues.
Koshal -
Hi all,
please tell me the tables for Credit data.
Thanks,
kishore.1) Check to see if there are any entries in table S066 and S067. These SIS tables hold the credit data for sales order value and delivery order value.
hope it helps -
Hi,
Please provide the base tables for Budget data
thankshi Arun,
check these
BPGE (overall budgets),
BPJA (annual budgets) and
BPPE (period budgets). -
The table for storing data for infocube and ODS
Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit. -
Method :Want to Use Z-Table for Accessing Data
Dear All,
I am new to BADI. I have implented one HR-PAYROLL Badi.
In this BADI I am having one method . I want to Use One Z-table for accessing data from
that table . Not able define the table in method.
Kindly tell me how to do it .
Thanking you in Advance
SiladityaHello Siladitya
I assume your problem is the definition of an itab for selecting data from your Z-table. In case of classes you have to use table types and workareas, e.g.:
METHOD name_of_interface_method.
DATA:
lt_itab TYPE TABLE OF <name of z-table>,
ls_record TYPE <name of z-table>.
SELECT * FROM <name of z-table> INTO TABLE lt_itab.
LOOP AT lt_itab INTO ls_record.
ENDLOOP.
ENDMETHOD.
Regards
Uwe -
Dynamic Internal Table for reading data from external file
Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
KumarHi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards -
System table for Additional Data - Basic data text (MM03)
Hi
How can I get the system table for stroring data in MM03 in "Additional Data" the "basic data text" ?
Thanks in advance.Hi,
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'Z610'
LANGUAGE = SY-LANGU
NAME = V_TDNAME
OBJECT = 'VBBK'
ARCHIVE_HANDLE = 0
IMPORTING
HEADER = I_TEXT_HEAD
TABLES
LINES = I_TEXT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
Regards,
Bharani -
Error while filling set up tables for 2LIS_11 data sources
hello All ,
I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
Job started
Step 001 started (program RMCVNEUA, variant &0000000000005, )
Start of order processing
Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
Job cancelled
Is there any setting required in R3 side before filling setup tables of SD ?
I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
Regards ,
Amol Kulkarni
Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AMHi,
one of the sales document currencies is not maintained properly in the system and therefore its failing.
you need to correct those documents before filling the set up tables.
Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
generally you will see the sales doc number in the error for which its failing.
May be at the time of filling some óne was working on some sales document and tried it save it.
correct that doc and fill the set up tables again.
Thanks
Ajeet -
Table for Sales datas assinged to Equip/Floc
Hi
I need a table for Sales datas like sales org,distribution channel,divition,sales office,sales group assigned to equipment master,
Points assured
Thanks
Seenuhi seenu
yes you are wright the sales organisation, DC,Divison is strored under the ILOA table only , since in equipment its being picked from the view table,you can interrelate with FL and equipment
regards
thyagarajan -
TO FIND TABLES FOR MASTER DATA TRANSACTIONS
HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
How can we find the tables for master data transactions.?
please reply...
thanks.Hi,
I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
Thanks
SK SIDDIQUI
Maybe you are looking for
-
I bought stuff off the cloud but it's not showing up on my computer, what do I do?
I've bought a number of items (Movies, music, ect.) off iTunes through the app on my iPad. Yet, when I return to my computer it doesn't show up. I tried going to the store and looking it up but all it says it that "I already own this." I have no idea
-
Can we show blank lines for transient VO?
I'm a newbie.. Using JDev 11.1.1.2.0. I have a requirement like this (simplified): On first page show an editable table with 2 columns: part no and date, and 10 blank rows. On hitting submit, it should go to a second page which has the part number, d
-
Error accessing worklist in 10.1.2.0.2
Hi I am getting the following error while trying to access the worklist in bpel mid tier - 10.1.2.0.2 500 Internal Server Errorjava.lang.NoClassDefFoundError at oracle.tip.pc.services.hw.worklist.WorklistService.<init>(WorklistService.java:201)
-
Zone data expires not updating in DNS
I am struggling a bit with the Lion DNS system. Using Lion Server 10.7.3 no matter what I set as the hours for "zone data expires", it reverts to 4 hrs. I opened the db.zone file in /var/named . The other three fields update fine. But the expire entr
-
Reg:-nQSError: 1005(metadata consistency warnings)
Hi all, I tried to modify one report by adding a new column Supplier Account Number. But when I added this column to the report,I am getting this error.Same is the case if I add any column from Dim - Supplier Account to the report. *State: HY000. Cod