Table for Normal Duration of the activity

Hi all,
In which table ( not structure), is the normal duration of the activity is stored ?. How do we really understand this information from looking at the structure AFVGD?
Warm regards,
Srinivas Potluri

Hi Sreenivas,
Thanks for a quick reply. Initially I did check in the table AFVV, but overlooked the field.
Thanks once again.
Warm regards,
Srinivas Potluri

Similar Messages

Table for milestone attached to the activity

Dear all,
This is regarding the SAP table for Milestone in project. I need to fetch the data for the milestone attached to the activity of the project. Table MLST for milestone has the WBS no. as one of the field and gives the details of milestones attached directly to WBS but it doesnot give the details of milestones attached to the network activity.
If anybody knows about the table please help.

A/c to me there is no tables availabe for your requirment I think this data is being stored in structure MLSTI. You can get details from ABAP consultant.
however your requirement can be solved by txn CN53n. Give * in all input field. Download report in excle filter /sort and use the data. For the further details you can use MLST table.
Regards
Nitin

What are the tables for Partner Fuction regarding the Vendors Purchasing ?

Hello Gurus,
What are the tables for Partner Fuction regarding the Vendors Purchasing Organisation. I need the Partner Function Key, Parner Function Name, Number and the Name of the Number.
Thanx in advance,
Ramona

Hi Jürgen,
I know that table but it is only showing me the technical name of the Partner Function and I need also the rest: the text(name), number and the number name (text). I presume there are other tables for those infos.
I am not sure if I understand what are these. I just want the table to upload the data to BW.

Approximate time needed for normal shutdown of the instance

how to figure out how much time needed to stop the oracle instance?
do the oracle "shutdown immediate" in case when OS is shutting down or "shutdown normal"?
What will be the result if there are still long-running transactions when OS shutdown initiated?

Anton Kharus wrote:
how to figure out how much time needed to stop the oracle instance?
By measuring the shutdown timings from time to time.
do the oracle "shutdown immediate" in case when OS is shutting down or "shutdown normal"?
What will be the result if there are still long-running transactions when OS shutdown initiated?
Oracle is only shutdown at a system shutdown if you configure shutdown scripts to do so.
Depending on the OS you have these scripts must be placed somewhere in /etc/rc?.d or /sbin/rc?.d
It is ofcourse depending on the shutdown type, and the amount of running session.
Shutdown normal will wait until all users have disconnected
Shutdown immediate will wait until all users have ended their running statement
Shutdown transactional will wit for users to and an active transaction
Shutdown abort will not wait, but leave the database in a to-be recovered state.
Shutdown abort should only be used in case all other shutdown commands do not work, or there has been some kind of error leaving some database processes running.
HTH,
FJFranken
My Blog: http://managingoracle.blogspot.com

SAP table for finding Quant from the Handling unit

Hi All,
I would like to know the SAP table name - from the handling unit (where the stock received in the Warehouse), i would like to corresponding Quant ?
PSS

Hi,
To know the QUANT for handling unit, use the table LQUA.

Table for characteristics values in the sales order

Hi Experts
I am entering the characteristics values in the classification screen in the sales order.
I want to capture the characteristics & values with reference to the individual sales order for reports.
Please let me know the tables for the same as it doesn't get capture in the item table..
Thanks
Ganesh
Edited by: jganesh on May 4, 2011 1:26 PM

Hiii,
you may use VELO01_GET_CONFIGURATION function module to pass VBAP-CUOBJ value
Hope it will solve your problem.
Regards
Shambhu Sarkar

(Help!) Free subscription magazine app - rejected twice for same bug - Specifically, the activity in

Hi,
Here's the rejection response for the app.
2.2
We found that your app exhibited one or more bugs, when reviewed on iPad running iOS 7.1, on both Wi-Fi and cellular networks, which is not in compliance with the App Store Review Guidelines.
Specifically, the activity indicator spins indefinitely purchasing a subscription. Please see the attached screenshot for details.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.
Screenshot_0.png
I had the same rejection the first time. After looking online at Adobe I thought it was a billing issue, so managed to get that rectifed. I hadnt used a shared secret (as it hadnt shown up because, I thought, the billing wasnt setup correctly). After we corrected the billing, I had access to the shared secret which I have used.
Any ideas what else this could be?
The app is a magazine app which is for free subscription. That's the inapp purchase. No folio in app purchases, because they are free. Sent with the first version on the magazine published, although Apple coulnt have got to it as the subscription time's out.
Help! Because this is the second rejection, it's two weeks on and I am getting close to an event which I must have the app live for.
Thanks for any help,
Matt

Hi Neil,
I used the guide to make the issue — so I think everything is in place.
The first time around our billing wasn't setup so I didn't get to generate a shared secret. The second time I did.
I generated the secret — which I can view under the in app purchase for the (free) subscription in manage in-app purchases. That code I pasted into the admin account iTunes Connect Shared Secret panel for the same customer ID (Account ID). I opened the Folio Producer Organiser afterward — how do you know it registers the code? I didn't see anything to indicate such.
One thing — not sure if it's relevant — whenever the app fails it highlights in yellow the languages in the in-app purchase. I selected more languages this time to cover all the different kinds of English. Again, not sure if that's relevant?
Plus when I click the link to view the app in the app store it says it’s not in the UK store and tries to switch to the US, which if you allow it then says it can’t find. I think this is because it’s not approved and the link will be good when that happens (hence I copied that into the section just below the shared secret on the DPS account admin panel).
Honestly, I am a wee bit stumped now.

Table for Open items of the customer

Hi all ,
In whch table can the open items of the customer are stored.
thanks

check BSID table for open items and BSAD for cleared items
alll the best

Need related table for some subject in the primavera contact management

Please I want to know the related table for the subject contact or contract or cost ... in the primavera application,
if someone have any idea let me know
Thanks

If you are looking for the database relationships (to assist in building forms/reports or using web services) you should look in the Oracke Knowledgbase. You should find the joins document here:
https://support.oracle.com/epmos/faces/DocumentDisplay?id=1210307.1&displayIndex=8

BDC for transaction AC02, output the activity number on screen

HI,
how to get the system created activity number on to the output screen after completion of BDC, data transfer using call transaction.
with regards,
sagar.

Hi,
Do you want that once the BDC is finished then it should stay on same screen with activity number if yes you will get the activity number in your BDCMSG table. Using that you can set paramter id ASN and do a call transaction again.
Please let us know if your requirement is different from the above one.
thanks
Nabheet

EXP: Export all tables for one user except the contents of one table

I need to export all tables (> 100 Tables) of an user except the contents of one table. Is there a possibility to call the EXP command and exclude the one table ??
Thanks in advance .-)
(Oracle11G)
Edited by: gromit on Feb 14, 2011 4:41 AM

It is not possible to perform it from a client. Is this correct? The datapump task itself can be started from a client, but - you are right - datapump is server-based. Especially that refers to the dumpfile location, which has to be defined as DIRECTORY on the server:
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/dp_overview.htm#i1007107
Werner

Table for price produced in the invoice-SD module

hi friends is there any table(not structure) from which i can find the value for
total Basic price(without any tax of frieght etc)
of an item in the invoice.like if the per unit value is 100/- nd qty is 10/- then total =1000/-
i want this basic total. in where clause i can use vbeln and posnr , i mean i have biiling document no and the item no
like in vbrp i am having the total net value for the billing document no and item no. but i want the total basic value for that item .
Edited by: achalmehra on Jan 20, 2010 11:29 AM

First go to table T685 anf findout the condition type(like ZPBP = base price) for basic price. then take VBELN goto table VBRK get the value for field KNUMV based on this value goto KONV table get the base price( field KAWRT or KBETR) using the basic price condition type.....

How do I position my layer/table for my header in the center and up top?

I have designed a site before on my dreamweaver 4 site and
decided to design a new one. I just tried to insert my header into
the website and it worked fine. However, how to I align it directly
in the center and all the way to the top so their is no space from
the top of my site and header? My header is about 960 pixels wide
and was hoping to have it centered when viewed with a few inches of
background on each side. My last sight it just worked out when I
did but not this time.
Just so you know, I set a header layer down first, then put
in a single row and column table, then inserted my Gif header.
Header looks great but placement is wrong. Thanks

Good grief - DW3? It's not there. You will have to do it in
code view.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dontsettle22" <[email protected]> wrote in
message
news:fm1p83$pql$[email protected]..
> Darn it, this is what I was looking for, however, I am
on dreamweaver 3.
> I can't find an insert ....layout....div. Any other
ideas where I find
> div?

TABLE for components issued to the order

Hello all,
I have a requirement where I am asked to create a report which picks up all the open orders and and all the Actual quantities of components that have been issued to the order and the currency value for it. Would you know what tables I can use for this report? One table that I found useful is COSP (CO Object: Cost Totals for External Postings). It gives me the dollar value of components issued and quantity but we dont get the material number for those components.
If you have any suggestion plz let me know.
Regards

For actual
Check AUFM table
selection criteria movement type 261 -(AUFM- BWART)
posting date:( AUFM- BUDAT)
you can find the actual posting quantity (AUFM-ERFMG) relevant to production order and value (AUFM-SHKZG)
for plan
use RESB table.

Is this graphs are for normal performance or the app leaking the memory ?!!

Hey there,
I'm new to java profiling and testing and I faced some hang ups so i made some fixes to my code .
It's medium sized application and i captured some shots of the Memory Heap, Memory GC, Threads/Loaded classes Graphs From NetBeans Profiler.
If any one may see them and say if this is normal performance or I need some more fixing in the come.
Note that the graphs are captured when I was doing Load Test on the program
The Memory Heap Graphs
http://islamelhosary.mufix.org/profiler/3.png
http://islamelhosary.mufix.org/profiler/4.png
http://islamelhosary.mufix.org/profiler/7.png
The Memory GC Graphs
http://islamelhosary.mufix.org/profiler/2.png
http://islamelhosary.mufix.org/profiler/5.png
http://islamelhosary.mufix.org/profiler/8.png
The Threads/Loaded classes Graphs
http://islamelhosary.mufix.org/profiler/1.png
http://islamelhosary.mufix.org/profiler/6.png
http://islamelhosary.mufix.org/profiler/9.pngThanks for your time
Islam El Hosary

It's always hard to tell if memory is leaking by graphs alone... of course if your memory graph is always increasing and never returning to some base value after GC, then you probably have a leak. You should use a tool like JProfiler on your app server to watch for leaks from a particular application (object within some app). But, in general... watch all graphs Memory, Threads, and CPU usage for abnormal trends. An app can also leak via over usage of resources (spawning threads that are never completing or never released).

Table for Normal Duration of the activity

Similar Messages

Maybe you are looking for