Table For OBYU and OBYG transactions

Hi all,
I need to create a report in HR, where i need entries maintained through transaction OBYU and OBYG.
Could anyone tell me the table names to get the contents of those transactions.
Thanks in Advance.
Regards
Ravi

Hi All,
I Got a FM which gives the Details og OBYE and OBYG transactions .
HRPP_FI_ACCT_DET_HR
But we need to read record wise.
If we get table name , that would be better.
Thanks and Regards
Sunil

Similar Messages

User Exit for VA01 and VA02 transaction codes

Hi,
I am writing a userexit for PO number checking for VA01 and VA02 transaction codes.The PO number should be unique in the table (vbkd-bstkd).Duplicate PO number entries can be checked with Sold-to Party.If anybody written something like this....please advice me...
Thanks in advance.
fractal

Hi Fractel,
Why are you looking for a user exit to do this duplicate PO check?
This can be achieved through configuration of your sales order document type and message control. Follow the path below for configuration of the document type.
Implementation Guide for R/3 Customizing (IMG)
-->Sales and Distribution
   -->Sales
      -->Sales Documents
         -->Sales Document Header
            -->Define Sales Document Types
Once you execute this node, you will see all the available document types. Select the one you are interested in and click the details icon. In the subsequent screen, under "General Control" section, there is a field "Check purch.order no". Pick the value 'A' from the drop-down list.
Once you do this, system will check for duplicate PO numbers whenever you are creating or changing the sales order with that document type. If duplicate, it issues a message.

Table for shipping and billing documents ?

hi experts,
how can we come to know that what shipping (VL01n), and billing(VF01) documents has been created for any particular date.
actually the problem is that i want to modify some documents that i have created a few days ago, plz help me?
thanks in advance.

Hi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka

Table for preceding and Susequent documents .

hi experts,
Please tell me the name of table which contains all preceding and subsequent documents of purchase order or sales order.
Answer will be rewarded by Max points.
regards,
Sandeep

Hi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka

Table for Customer and vendor open balance on a key date

Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.

Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu

Need table for customer and vendor carry forward balance

Hi,
I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
Thanks in advance.
Regards,
Swati

Hi Gurus
The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
and my 2nd query is how to get these opening balance in Z report, at Header Level.
Thanks and Regards
Dnyanesh

How to find R/3 table for FI and PS Datasources

Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
Shanthi

Hi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK

Source tables for forms and tabular forms must have a primary key.

Why does HTML DB 2.0 return the message
"Source tables for forms and tabular forms must have a primary key."
when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
bw - Christian

Christian,
In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
Regards,
Marc

Taking long time filling the setup tables for sales and shipment

Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .

Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth

Is there any userexit for MIR7 and   MIRO transaction?

Hai friends,
       Is there any userexit for MIR7 and MIRO transaction at the time of pressing "save as completed" or "save" button. I want to check the sales certificate and invoice verification for the document number entered in MIR7 and MIRO.
Regards,
safiq
NOTE:useful points will be rewarded.

hi,
these r the exits related to mir7.
Transaction Code - MIR7                     Park Invoice
Enhancement/ Business Add-in            Description
Enhancement
LMR1M001                                User exits in Logistics Invoice Verification
LMR1M002                                Account grouping for GR/IR account maintenance
LMR1M003                                Number assignment in Logistics Invoice Verification
LMR1M004                                Logistics Invoice Verification: item text for follow-on docs
LMR1M005                                Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006                                Logistics Invoice Verification: Process XML Invoice
MRMH0001                                Logistics Invoice Verification: ERS procedure
MRMH0002                                Logistics Invoice Verification: EDI inbound
MRMH0003                                Logistics Invoice Verification: Revaluation/RAP
MRMN0001                                Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE                          Business Add-In: Logistics Invoice Verification
put a break point in each exit,like break username and test the transaction .

Find smartform or sapscript for me2s and me9f transaction

HI, i want to find smartform or sapscript for me2s and me9f transactions, because i want to do z smartforms for those transactions.
How can i find it?
How can i use NACE to customize the smartforms?
thanks
REward POints

Hi Gurus
I can able to open the form from t code f.64 but what is the form name how do i know............It make me crazy I am searching to find but unable to locate the name
please help
regards

Table for terms and conditions

what is table for terms and conditiions??
regards
jyoti

Hi Jyoti,
If u are looking for the payment terms then the table T052 and T052U.
Regards
Kiran Sure

Base tables for aggragates and Multiproviders

Is RSDICMULTIIOBJ the base table for Multiproviders?
What is the base table for Aggragates and units?

Multiproviders
RSDCUBEMULTI
RSDICMULTIIOBJ
Aggregates
RSDDAGGREF
RSDDAGGRT
RSDDCVERREPAGGR
RSDDAGGR
RSDDAGGRCOMP
RSDDAGGRDIR
RSDDAGGRDIR_M

How to fill up set up tables for 2lis_03_UM and BF?

Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanks

Hi,
I think you can follow the same procedure. After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM

Table for Material and Inspecton lot together?

Dear SAPIENTS,
Please tell me table for Material and Inspecton lot together.
Regards,
Kaushal Rai

Hi Kaushal,
- Run trx QA08.
- Select the option Activate inspection type. (This tab should be green)
- Enter material type at least to not have a junk of data at a single execution. You can set other fields as per your requirement.
- Check the Box "Assign Inspection type", Don't check/activate any of the rest three
- Enter the inspection type, here is an limitation you can know the status inspection type by type.
- Execute.
- The system will give you the list of the materials that are note activated for the inspection type you feed in the selection screen.
Hope it satisfy you. at the other way me and you both will search for the better option.
Regards,
Shyamal

Table For OBYU and OBYG transactions

Similar Messages

Maybe you are looking for