Table for Original Values in Results Recording

Hi,
Where are the original values of the results recording of the inspection lot (inspection type 04) stored?
Or, is there any function module to fetch this data?
Regards
Ramakanth

it's in table QASE
original value (Data Element- QORIGINAL_INPUT )

Similar Messages

Table for Rebate Condition Types( Condition Records)

Hello All,
I need the table and the FM name which stores the values of the Key Combination of the Rebate Condition Type maintained in a Rebate Agreement.
If not, at least, give me the name of the FM which stores the values of the key combination maintained in condition records for pricing.
Regards,
Raghu.

I'll give an example,what am looking for..:
I've a Condition Type: ZBAX for ex. it has a key combination: Sales OrgCustomerMaterial.
I maintain condition records as:
For CU70/21100043/3456 the value of the condition record is say 100 euro.
My question is where will I get the values CU70/21100043/3456 ?
FYI..in T685 the defintion of the Condition Type is stored. in SAP, no T-table is meant to store condition record values.
KONA contains data on Rebate Agreements i.e. RA no, Rebate Recepient etc..
I know that KONP stores the accrual %, scale base, scale values etc..
but, I want to know where are the values for the key stored? Or, the FM that would fetch me these details?
I hope am clear..
Regards,
Raghu.

Table for characteristics values in the sales order

Hi Experts
I am entering the characteristics values in the classification screen in the sales order.
I want to capture the characteristics & values with reference to the individual sales order for reports.
Please let me know the tables for the same as it doesn't get capture in the item table..
Thanks
Ganesh
Edited by: jganesh on May 4, 2011 1:26 PM

Hiii,
you may use VELO01_GET_CONFIGURATION function module to pass VBAP-CUOBJ value
Hope it will solve your problem.
Regards
Shambhu Sarkar

Assets table for Acquisition value and Equipment number

Hi,
What is the table that store the Acquisition value and the Equipment number of the assets ?
Please help
Regards.

Hi Jehade,
ITOB table records the changes made in the equipment master records.
But I think it is better for you to use the view V_EQUI instead of ITOB table. If you use the table ITOB in any report it may hamper the performance of the report.
Please refer the SAP NOTE # 335537 - ITOB Should not be used
Hope this can help you
Tarek

Table for Condition Value in VF03

Dear all,
Im creating the output format for Billing Document(INVOICE) through VFO3,
i need to put the unit price and different Taxes(Condition values) miantained in VF03,
CAN ANY ONE TELL ME FROM WHERE i need to fetch all condition values based on billing document No.
i.e from which tables and whts the conditions
IM AN ABAPER SO KINDLY GIVE THE TABLES FLOW AS POSSIBLE.
Regards,
Niranja.G

Komv-kwert is the value which depends on condition type (KOMV-KSCHL).
regards,
Manish

Table for configuration values

Hi,
My Sales Order/Invoice Material has is configured. In the VBRP table i can get the configuration(filed CUOBJ).
Please tell me the table to find the values for this configuration Object.
Thanks in advance.
Challa

U can use WHERE USED LIST for this filed, then u identify the config tables from normal tables, from the displayed list......these days i dont hv SAP access, so, i can not!!!
thanq

Entering Angular Values in results recording

Dear All ,
My incomming inspection is done for a prism , where angle of the prisim is measured.
I will get the results as 30 Deg , 60 Min and 10 Sec . ie 30D60"10' . If we enter 30.60.10 or 30'60"10 system is not accpeting. How to enter this type of values in a sisngle character.
Thanks in advance
Regards
Srihari

You can also convert them all into decimal degree and the update the MIC.
Formula;
dn = d + m/60 + s/3600 where Dn is decimal degree..
hope this helps.

To display all tables for particular value

hi All
I know one column value(Suppose ename as SMITH in emp table). So now I want to display all the tables which will contain ename as SMITH.
Thanks
null

Hi Smiller
Its displaying the tables which has column name what we are giving in Query . But here instead of passing column name(ename) I want to pass column value(SMITH). If I pass this SMITH to the query I want do display the tables where smith exists. Hope You got.
Thanks
Devender
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by smiller ():
select table_name from user_tab_columns where column_name like 'ename';
OR
select table_name from dba_tab_columns
where column_name like 'ename';
<HR></BLOCKQUOTE>
null

Tables for threshold value in GTS 11

Good morning,
to get away from our old ERP preference calculation we bought a license for GTS. At the moment we are discussing implementing version 10.1 or even 11.
I am worrying as I am not sure, how to put data out of GTS to BI (BW) with version 11. We need the price and the threshold value (former table MMPREF_PRO_....) and those for the vendor declaration from supplier and the compression. (LFEI/MAPE).
Does anybody has experience with getting this into BI? And the "new" tablenames in GTS?
Hope, my questions are not too dumb, but we are just starting.
Thanks for any help and have a nice day.
Rgds Alex Linck
Kostal Germany

Hi ,
Customize as per the path given below for the GTS to BI(BW) data replication.
IMG : Integration with Other mySAP.com Components >> Data Transfer to the SAP Business Information Warehouse >> General Settings >> Maintain Control Parameters for Data Transfer.
GTS > General Setting > Document Structure > Define Document Types Turn on > Transfer to SAP Netweaver BI Active flag .
GTS > General Setting > Document Structure > Define Item Categories > Transfer to SAP Netweaver BI Active flag .
GTS > General Setting > Organizational Structure > Control at Foreign Trade Organization [FTO] for SAP NW BI > In the BI Active column, this flag is turned on for active FTOs.
Ashish

Org. Structure - table for inherited values (general attributes) ?

Hello,
I need to read all general attributes maintained at the selected
position (objid), including inherited values.
Do you know where inherited values are stored in ?
In table HRT1222 I can see only locally maintained attributes.
Best regards,
Robert

Hi Robert,
How can you make the inherited values available to a user. I would assume that there would be a report but I could not find one. Can this fm be made available for a SAP Query?
It seems to be an obvious requirement by users but yet not easily available.
Thanks
Pascal
Edited by: Pascal Menezes on Feb 25, 2011 2:57 PM

Tables for Costing values in Sales

Dear SAP experts ,
I have values in trasaction KKAC and CN41N that I need to capture in a report.
Do you guys know what tables I can access these values the fastest ?
In KKAC , I would like to see the total Cost and Revenue, so going thru COEP would be a pain . Any other suggestion ?
IN CN41N I need to look at the Total Cost and Total Revenue as well based on the WBS. - Any suggestions ?
Thanks a million
regards
Moon

Hi ,
Thanks for your reply but this is not what I want.
I know the transaction codes, but I need SAP tables now because I am creating my own customised report.
My reports need to look something like what I see in KKAC and CN41N, hence I need SAP tables that I can use to extract this same data.
KKAC - to look at cost and revenue as a whole ( not line item ) anything else besides COEP ?
CN41N - to look at the cost and revenue at WBS level - what table can I use ?
rgds
Moon

Is it possible to filter a table for NULL values in a column? (11g)

I am using the out-of-the box table filtering provided by ADF Faces RC, but cannot figure out how to filter on Null value that are in the table.
I have tried "IS NULL" and "= NULL", but nothing works.
I have a backing bean that intercepts the filtered values before the filter is applied, and I can't set it there either.
Does anyone know how this is accomplished?

No, it is not. Worse, many people will view this in any old PDF viewer, most of which won't have overprint preview at all.
You need to send very clear instructions about this, with specific screen shots - or better, avoid tools and constructions that require it. Probably some wording about "need to view with suitable professional tools" will make the message more palatable.

Table for Tax Values in PO

Dear Experts,
PLease let me know, the values of taxes in Purchase order is tored in which table..
I've identified, the Pricing conditions are stored in KONV table..
But where the Tax conditions are stored.. Which Table..
let me know.. Thanks in Advance

Hi,
Go to SE37 to get list of Function Modules
Refer links;
[Creating a Function module|http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm]
[Calling Function Modules|http://help.sap.com/saphelp_nw70/helpdata/en/9f/db98ef35c111d1829f0000e829fbfe/content.htm]

Result Recording QA32

Dear Experts,
In QA32 when we want to enter result for particular inspection lot, there is column for result and original value, whenever a user enter some values in the result text field, the original value column automatically inserted.
My questions are:
1. I found some inspection lots that had all the result value filled in but the original values are blank, what may caused this situation?
assuming that the original values are updated automatically each time the result columns are filled in.
2. Where do I found the table column to store this result field? because I can't find it in QASR or in QAMR tables.
Please help, any help will be highly appreciated.
Sincerely,
Sammy

Hi
Original Value Before Input Processing
In this field, the system saves the original value that was actually entered during results recording. Attributes that may have been entered are also saved (for
Means
1.suppose you entered 10.200 value but the data you have maintained allows you to only aceept 10.2 as a vlaue.
then Measured value: 10.2 & Original value will be :10.200
Original Value : This is what you have entered during result recording.
2.
Results Recording QAKL Results table for value classes
Results Recording QAMR Characteristic results during inspection processing
Results Recording QAMV Characteristic specifications for inspection processing
Results Recording QASE Results table for the sample unit
Results Recording QASR Sample results for inspection characteristics
Results Recording QASV Sample specifications for inspection processing
Regards
Sujit

How to Incorporate formula in QE51 (result recording screen for insp char)?

Hi,
    Kindly help me in incorporating a formula field in QE51 screen where we record results for inspection characteristics. I need to add a formula in a field which should be a qualitative characteristics which should make calculations of few quantitative fields
EX:
Field 1 = xxx
Field 2 = yyy
Field 3 = zzz
Field 4 = Field 1 - field 2 - field 3
If the Field 4 has someother value other than zero upon saving the result it should throw some error.
How can i add this formula in the system.. can anyone help me?
Thanks in Advance
Best Regards
P.K.Senthil Kumar
Edited by: senthil kumar on Apr 5, 2008 10:55 AM

See the std sap help, then if you have any aboubt come back
Formula Evaluation
Use
You can have the measured values of a characteristic (calculated characteristic) automatically calculated from the input and results of other characteristics (calculation input characteristics). The formula is automatically evaluated when the characteristic is valuated. You can trigger the formula evaluation before the characteristic valuation.
You can determine the weight of a glass bottle, by determining the weight of the empty bottle and the volume of water needed to fill it. Both these measurements are represented as calculation input characteristics; the total weight is then the calculated characteristic.
Prerequisites
For formula calculation, the following prerequisites must be fulfilled:
     You have defined the formula that is used in the inspection characteristic for the task list.
You can use standard mathematical functions in this formula, as well as the following operands:
o     Numerical constants
o     The specifications and results of other characteristics in the same operation
o     External function modules
     For inspection lots with an assigned serial number profile or units to be inspected with external numbering, the following applies:
To evaluate the formula for original values, you must ensure that a reference is made to the same serial number for the calculation input characteristics. The "Serial number - original value" assignment is the decisive factor for the first (leading) calculation input characteristic. If a serial number is not available for the first calculation input characteristic in another calculation input characteristic, you cannot evaluate the formula.
Activities
To calculate the formula from the valuation, choose:
     Evaluate formula on the characteristic overview screen
     Extras  Formula  Evaluate formula on the characteristic single screen
If values from other characteristics are used in the formula, these calculation input characteristics must have already been valuated before the formula can be calculated.
To display the formula, choose Extras  Formula  Display formula on the characteristic overview screen or the characteristic single screen.
The formula printout is then displayed in a window.

Table for Original Values in Results Recording

Similar Messages

Maybe you are looking for