Table for Purchase Requisition Item Text

I would like to know, what is the table which stores the item text in tab texts for Purchase Requisition?

Hai,
the table is STXH.
CALL FUNCTION 'READ_TEXT'
      EXPORTING
CLIENT                        = SY-MANDT
        ID                            = IT_STXH-TDID "ID
        LANGUAGE                      = IT_STXH-TDSPRAS " LANGUAGE
        NAME                          = IT_STXH-TDNAME
        OBJECT                        = IT_STXH-TDOBJECT
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
      TABLES
        LINES                         = L_LINES
Regards,
Venkat

Similar Messages

Detect purchase requisition item text changes

Hi Abap Gurus,
During a PR modification (ME52N), I need to read the purchase requisition item text at runtime to compare with the stored item text (read text) and detect if it have changes.
Actually, I am using the badi ME_REQ_POSTED.
How could I detect the PR item text changes? or How could I read the item text at runtime.
Somebody could help me with this....
Other ideas will be welcome.....
Regards,
Jaya Sankar.M

Hi,
But can you change the purchase requisition item text using the badi?

Nested table for PO Output (Item texts) - trying again.

Hi experts
I posted this question already, but the formatting disappeared, so trying again.
I have created a PDF version of the Purchase Order output. Everything works well, except for the last step - a nested table where I want to display Item texts from the PO for every item.
The steps I followed:
1. In the Interface, I read the item texts, and placed them in an internal table, where the table has a field EBELP (item number) and a field for the text. So, for a PO with 5 items, where 2 items have texts, the table might look like this:
     00010    First line of text for item 10.
     00010    Second line of text for item 10.
     00040    Only line of text for item 40.
2. In the context of the form, I put this table 'under' the existing 'ITEM' entry. In other words, for every item, the texts must be displayed. Obviously I then put in an entry under the WHERE CONDITIONS to say that EBELP = ITEM-EBELP, otherwise it would repeat every line of text for every item.
The problem is that it does not behave quite as I expected. It currently prints:
Item 10 information
         First line of text for item 10.
         Second line of text for item 10.
Item 20 information
         Only line of text for item 40.
Item 30 information
Item 40 information
Item 50 information
Where it should print:
Item 10 information
         First line of text for item 10.
         Second line of text for item 10.
Item 20 information
Item 30 information
+Item 40 information+
         Only line of text for item 40.
Item 50 information
In other words, it simply 'breaks' on change of EBELP, and moves the text to the next line, as opposed to the correct line.
I tried debugging, and it does appear to be doing things in the right order, but it is still doing the output incorrectly. I also searched the forums for similar problems, but I could not find a solution to the problem I am experiencing.
I also put 'dummy' (empty) rows into the table - that fixes it, but then it messes with my layout and I get something like:
Item 10 information
         First line of text for item 10.
         Second line of text for item 10.
Item 20 information
Item 30 information
Item 40 information
         Only line of text for item 40.
Item 50 information
In the above, I don't want the gaps where the empty rows are.
Please advise?
Thanks and kind regards
Casper

Reposted without formatting...
I have created a PDF version of the Purchase Order output. Everything works well, except for the last step - a nested table where I want to display Item texts from the PO for every item.
The steps I followed:
1. In the Interface, I read the item texts, and placed them in an internal table, where the table has a field EBELP (item number) and a field for the text. So, for a PO with 5 items, where 2 items have texts, the table might look like this:
     00010    First line of text for item 10.
     00010    Second line of text for item 10.
     00040    Only line of text for item 40.
2. In the context of the form, I put this table 'under' the existing 'ITEM' entry. In other words, for every item, the texts must be displayed. Obviously I then put in an entry under the WHERE CONDITIONS to say that EBELP = ITEM-EBELP, otherwise it would repeat every line of text for every item.
The problem is that it does not behave quite as I expected. It currently prints:
Item 10 information
         First line of text for item 10.
         Second line of text for item 10.
Item 20 information
         Only line of text for item 40.
Item 30 information
Item 40 information
Item 50 information
Where it should print:
Item 10 information
         First line of text for item 10.
         Second line of text for item 10.
Item 20 information
Item 30 information
Item 40 information
         Only line of text for item 40.
Item 50 information
In other words, it simply 'breaks' on change of EBELP, and moves the text to the next line, as opposed to the correct line.
I tried debugging, and it does appear to be doing things in the right order, but it is still doing the output incorrectly. I also searched the forums for similar problems, but I could not find a solution to the problem I am experiencing.
I also put 'dummy' (empty) rows into the table - that fixes it, but then it messes with my layout and I get something like:
Item 10 information
         First line of text for item 10.
         Second line of text for item 10.
Item 20 information
Item 30 information
Item 40 information
         Only line of text for item 40.
Item 50 information
In the above, I don't want the gaps where the empty rows are.
Please advise?
Thanks and kind regards
Casper

Purchase Requisition item Text

Sir,
IN PR WHEN I IGO TO ITEM DETAILS in TEXT TAB
1 Item text
2 item note
3 Delivery Text
3 material Po text
were are the inputs reflected
Regards

Hi,
The setting for this inputs field are in below path.
SPRO-MM-Purchasing-Purchase requisitionTexts for PRDefine Text Types and Define Copying rules.
Define text types are cross client configuration.
Where in copying rules you can define from where those texts to adopted in PR.
Hope it will help you.
Thanks

To display standard text in purchase requistion item text.

Hi,
My requirement is display standard text in purchase requisition item text(text type 02). Please let me know where should i write the code and what it the code?
Thanks
Alka
Moderator message: please work yourself first on your requirement, if necessary return with specific problems that have not been frequently solved before, remember these forums are not a replacement for ABAP training.
Edited by: Thomas Zloch on Dec 1, 2010 11:52 AM

Hi Kiran,
As you stated its correct that the deletion indicator has to be set only after the document is closed. But your case is different, how did that deletion indicator got set for that "Purchase Requisitions".
As per my knowledge is that the deletion flag ca be changed, but not the deletion indicator. In case if I get soem thing I will respond to you.
Also I got this from SAP:
Set the indicator if you wish to archive documents using the one-step procedure.
Do not set the indicator if you wish to carry out your archiving using the two-step procedure.
--Thanks
Pankaj.K.S

Creating structured texts for purchase requisitions

Hello,
I would like to know if it's possible to define structured texts for purchase requisitions. By example, the item text would be like this :
Building :
Room :
and the user should only complete the missing information.
Does anybody have an idea on how to realize this ?
Thanks in advance.

Hi,
It is not a simple thing to do.
The item text comes from the material master (if you are using one) and so you could easily have the text for that as "Building Room" and the material text can be changed (if you configure the system correctly) so they could just add the information.
But you are limited to the size of the material text and so many people just use a non-material approach and manually key in the information in the text options rather than the Item text on the requisition line on the main screen. But in this case it is not a standard option to preformat the text as you require.
It is almost as if configurable materials may help, these use the classification function and so they have characteristics, it would be easy enough to have a characteristic for room and one for building. The user would then be prompted to enter just the values for each and so it would do exactly what you need.
But I don't have enough detailed experience of configurable materials to know for sure that you could use them like this, perhaps someone who knows them well could confirm if this would work?
Whatever happens it is not a simple standard option, but SAP is very flexible and so there may be a reasonable work-around option.
Steve B

No selectable items exist for purchase requisition l_banfn

Hi,
While creating PO with ref to PR getting the below error :
no selectable items exist for purchase requisition l'banf .
Checked if the PO is created, its not created,.
checked if the item is blocked/cancelled/deleted. Nothing is set.
PR looks fine. Dont know if any authorization data is missing?

Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM

"No selectable item exist for purchase requisition I_Banfn"

Dear all
While creating Po system show a massage"no selectable item exist for purchase requisition I_Banfn"
Please help.

Hi,
PR status in status TAB in item details You have following:
Processing status :Specifies the current processing status of the purchase requisition: IS PO Created or RFQ created etc...
Block ID:The requester (PR creator)can block a requisition item to prevent it from being converted to a purchase order
Processing State: Released or not Released
You need check above & then act to unblock if blocked , release it if it is not released or check if this PR already converted to PO.
Follow the steps to create PO from PR:
Enter ME21N T.Code
Click u201CDocument Overview onu201D
Click u201CSelection Variantu201D and Select Purchase requisition and double click & Execute
Now you will PR Numbers,Select your PR Number , you will have line items(10,20,30 etc..) , you will have all the details of PR (like item category,material , quanitites for each line items) and Now click u201CAdoptu201D and u will see all PR related copy to PO.
Regards,
Biju K

User exit/BADI for Purchase requisition through release of Process order

Hi ,
i need to add some text to the Pur Req.
The Pur Req will be created THROUGH the release of PROCESS order. Please let me know any exits are available for the same.
regards

Hi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MM06E011                                Activate PReq Block
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
M06B0003                                Number range and document number
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST                      Enhancements to Price Determination: Customer
ME_PO_PRICING                           Enhancements to Price Determination: Internal
ME_INFOREC_SEND                         Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED                      Purchasing Document Posted
SMOD_MRFLB001                           Control Items for Contract Release Order
EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
ME_REQ_POSTED                           Purchase Requisition Posted
ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
ME_BSART_DET                            Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN                    Commitment for return item
ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
ME_CHECK_OA                             Check BAdI for Contracts
Reward points if useful
Regards
Anji

Release strategy for purchase requisition does not kick in

Hi Gurus!
I've been struggling with this issue for some weeks now.
I have set up the release strategy configuration for purchase requisitions with classifications.
However, if I create a purchase requisition the release functionality is not taken into account by the system.
See below some more information regarding my configuration:
1. I've created a new characteristic "REL_PR_GROUP". Status: released, Multiple values, Number of Chars 3, 7 values (TR1, TR2, TR3....TR7), Table name: CEBAN, Field name: EKGRP, Procedure for value assignment set to not ready for input.
2. I've created a new class: "REL_PR_ANPC". Class type 032, Status: released, Same classification: do not check, Char: "REL_PR_GROUP"
3. I have one release group "T1", Rel. object 1, OverReqRel is marked, Class: "REL_PR_ANPC"
4. I have 5 release codes. Grp: T1, Code: 01....05
5. I have 2 release indicators:
"R = Released", Rel. for ordering is marked, Changeabil: 4, Value chgs. 100,0
"X = Blocked", Changeabil: 4, Value chgs. 100,0
6. I have 1 release strategy:
"T1 with Grp T1"
- one release group, 01 Manager
- release prerequisites not applicable because of only one release group
- release status, nothing marked = blocked, 01 marked = released
- classification, purchasing group is TR1 or TR2 or TR3 or TR4 or TR5 or TR6 or TR7
I intentionally kept the configuration as simple as possible so I can try to get it working first.
Now if I create a purchase requisition for an item with release group T1, I would expect the release strategy to be activated. However, this is not the case. I don't see the "release status" tab in the PR, and if I try to relase via ME54 the system says the PR is not relevant for release.
Could you please assist in getting this working?

Hi,
Have you checked in CL30/CL30N if your release strategy is derived successfully?
See section 3 of Note 365604. A small section of it:
You can use transaction CL30 search for an object using the data
of the purchase requisition/purchase order. Here, it is important
that the object search determines exactly one strategy. If this
is not the case, this indicates that there are overlapping
strategies in the system or that the release strategies in
Customizing do not correspond with those from transaction CL24.
See the previous point. If the object search returns more than
one result, the system subsequently determines an incorrect
release strategy or no release strategy at all.
If it is derived successfully, next, check the user exit EXIT_SAPLEBND_001 as per Note 371667:
The following assignment statement has to exist within activated SAP
enhancements M06B0002 (include zxm06u13) and M06B0005 (include zxm06u31)
for purchase requisitions:
E_CEBAN = I_CEBAN.
Regards,
Purnima.

BAPI_PO_CHANGE me22n add profit center for purchase requisition number

Hello all,
I have to add an item line for a specific sales order( p_vbeln ).
for that i use BAPI_SALESORDER_CHANGE and it works and the item is inserted.
( p_posnr = sales order item and ln_etnr = schedule_line = 1 )
Now I have to maintain the specific po item line and to insert the Profit Center related to the Purchase Requisition Number that was assigned to the above sales order item like using transaction ME22N.
when i use the transaction all i have to do is to ADD the Purchase requisition number to the PO Order Number and to add the PROFIT CENTER.
for this i use BAPI_PO_CHANGE.
i colect the folowing data:
from table VBFA( vbelv = sales order number vbeln = l_ebeln)
PO Number = p_ebeln.
from table VBEP ( vbeln = sales order number, posnr = the previously inserted sales order item )
Purchase Requisition Number = l_banfn
Purchase Requisition Item = l_bnfpo
from table VBAP (vbeln = sales order number, posnr = the previously inserted sales order item )
Profit Center = l_prctr
from table EKKN
select max( ebelp )
from ekkn
into l_ebelp
where ebeln = l_ebeln.
add 10 to l_ebelp
Purchase Order Item = l_ebelp .
and i move the data:
i_t_poitem-po_item = l_ebelp.
i_t_poitem-preq_no = l_banfn.
i_t_poitem-preq_item = l_bnfpo.
i_t_poitem-acctasscat = cc_x.
APPEND i_t_poitem.
i_t_poitemx-po_item = l_ebelp.
i_t_poitemx-po_itemx = cc_x.
i_t_poitemx-preq_no = cc_x.
i_t_poitemx-preq_item = cc_x.
i_t_poitemx-acctasscat = cc_x.
APPEND i_t_poitemx.
i_t_poaccount-po_item = l_ebelp.
i_t_poaccount-itm_number = p_posnr.
i_t_poaccount-SCHED_LINE = ln_etnr.
i_t_poaccount-profit_ctr = l_prctr.
APPEND i_t_poaccount.
i_t_poaccountx-po_item = l_ebelp.
i_t_poaccountx-profit_ctr = cc_x.
APPEND i_t_poaccountx.
then i use the function BAPI_PO_CHANGE:
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      purchaseorder                = p_ebeln
      testrun                          = l_test
   TABLES
     return                            = i_t_return_po
     poitem                          = i_t_poitem
     poitemx                        = i_t_poitemx
     poaccount                    = i_t_poaccount
     poaccountx                   = i_t_poaccountx.
BUT i get the folowing result ( messages in return table)
Insert item for PO-order
Message: Changing of PO using Enjoy BAPI unsuccessful ;
Message: Purchase order item 00120 still contains faulty account assignments ;
Message: Enter Profit Center ;
what should i do?
best regards,
emilia

hello,
i debugged the function.
first the data from poaccount is copied in lt_account.
then this happens:
PERFORM get_current_data
      TABLES    poitem               poschedule               poaccount
                pocondheader         pocond
                extensionout
                poexpimpitem         allversions              popartner
                potextheader         potextitem               return
      USING
                l_po                 lf_header_currency
      CHANGING
                expheader            exppoexpimpheader.
exppoexpimpheader = poexpimpheader. "foreign trade export workaround
after this form is executed poaccount-profit_ctr is empty.
lt_account-profit_ctr in not empty but then it is not anymore.
in the form this happens:
item data
CALL METHOD im_po->get_items
    IMPORTING
      ex_items = lt_items.
LOOP AT lt_items INTO an_item.
    l_item ?= an_item-model.
    CALL METHOD l_item->get_data
      IMPORTING
        ex_data = ls_mepoitem.
    ls_mepoitem-ebeln = ls_header-ebeln.
    APPEND ls_mepoitem TO lt_item.
schedules
accountings*
    CALL METHOD l_item->get_po_accountings
      IMPORTING
        ex_accountings = lt_accountings.
    LOOP AT lt_accountings INTO an_item.
      l_accounting ?= an_item-model.
      CALL METHOD l_accounting->get_data
        IMPORTING
          ex_data = ls_mepoaccounting.
      ls_mepoaccounting-ebeln = ls_header-ebeln.
      APPEND ls_mepoaccounting TO lt_account.
    ENDLOOP.
item conditions
foreign trade (item data; EIPO)
ENDLOOP.
so it acctualy copies every item from purchase number ebeln in lt_item.
for each one of them it copies the account data into lt_account.
so the last loop is for the item that i want to enhance.
here it copies all the necessary data in lt_account except of course the profit center because that's the one that i need to insert.
after this loop there is a form:
PERFORM move_account_out TABLES lt_account
                                                            ext_poaccount
                           USING header_currency.
where the ext_poaccount is the poaccount parameter.
this form:
clears ext_poaccount.
copies the data from lt_account into ext_poaccount.
and returns the ext_poaccount with the empty Profit center field
and so after performing get_current_data my parameter is deleted.
then it's almost the end of the function and nothing else related to the poaccount parameter.
so it's no use for me to insert the field Profit_Center?
is there another FM that i should use to be able to insert the profit center?
what should i do?
Best regards,
Emilia

BADI FOR PURCHASE REQUISITION

CAN I GET A SIMPLE EXAMPLE FOR ACTIVATING A BADI FOR PURCHASE REQUISITION ?

HI
Populate PO Item Text -User Exit or BADI
[Steps to Activate BAdI|http://help.sap.com/saphelp_nw04/helpdata/en/5f/071eed117c11d5b37d0050dadef62b/content.htm]
Regards
Pavan

Can't use Overall Release for Purchase Requisitions

I have two groups, AA and ZZ. Each group has it's own Class.
Group AA uses Cost Center Class (CN) (uses Characteristics Cost Center and Line Amount)
Group ZZ uses Order Class (OC) (uses Characteristic Order)
I have built one and only one Release Strategy for each of these Groups. These Strategies both work successfully when I select the other group to be the group for Overall Release. That is, if I set ZZ to be for Overall Release, then create a requisition, the release strategy for Group AA is applied successfully. However, if I modify the req the strategy for ZZ, does not get applied.
The opposite is true. When AA is set to be for Overall release, then ZZ works. However, if I modify the req, then AA's release strategy does not get applied.
Again, both strategies work correctly when the other Group is set to be the one to use for Overall Release. However, neither strategy works if its group is set to be the one for Overall Release.
What am I missing? I only have two classes, two groups, and two release strategies.

SAP Standard system allows only 8 levels of release codes.If client requirement is more than 8 then for excess release codes customisation is done by the technical team (Abapers).Lets take an example of 15 release levels required for a client according to his Business needs then in this case initial 7 codes are customised and remaining 8 release codes are configured in the system.
Release procedure is of two types
Release Procedure without classification
             This procedure is applicable only for Purchase Requisitions.
             Here PR is released Item by Item only.
Release Procedure with classification
            This procedure is applicable to PR,RFQ,Service Entry sheet,RFQ,PO,Contract and scheduling agreements.
            Item by Item and Header level releases can be configured
            For PR - both item by item and Header level release can be configured
            For external purchasing documents - Release is possible only at Header level.
Step 1:
Create Characteristics
In this step we need to create characteristics - conditions to be satisfied for triggering Release startegy.For example client has asked to set release strategy based on 3 inputs.Combination of value, Plant and Purchasing group
            1) Total value of PR more than Rs 50,000
               create characteristic as "Release_PR_total_value" in transaction code CT04.
              Tab - Basic data " Data type --- CURR currency format", "Decimal places - eg. 2 " and "currency eg. INR or USD"
              Tab -values key in > 50000 INR
              Tab - Additional Data- Table Name "CEBAN" and Field Name "GSWRT"
              Tab - Restrictions - class type - 032 - Release strategy
            2) Plant
                 Create characteristic "Release_PR_plant" in transaction code CT04.
                 Tab - Basic data - Data type - CHAR; Number of chars - 4
                 Tab - Values - Key in all the plants for which you are required to configure release proc. eg. 1000,2000,3000
                 Tab - Additional data - Table name CEBAN and Field Name is WERKS.
            3) Purchaisng Group
                 Create characteristic "Release_PR_PurchasingGroup" in TCode CT04
                Tab - Basic data - Data Type - char, Number of chars eg. 3
                Tab - values - Key in all the purchasing Groups for which Release proc. is to be configured as required by Client.
                Tab - Addnl Data - Table Name CEKKO and field name - EKGRP
Step 2:
Define class in transaction code CL02
Menu path SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Edit classes
Here we assign all the above created Characteristics to a CLASS so that a release strategy to be triggered when all the conditions are met.
Create a new class with free choice of names as "PR_Release_proc" in transaction code CL02.*Key in the class name and select class type as 032 - RELEASE STRATEGY then click on symbol create to enter all the details as mentioned below.
Tab - Basic data - Enter description as "PR_Release-Proc",
status- Released, Same classification - check the push button - Warning Message
Tab- CHAR Enter above created 3 characteristics
1.Release_PR_total_value
2.Release_PR_plant
3.Release_PR_PurchasingGroup
step3:
Menu path is
SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>set up procedure with classification>
here define
1.Release Groups
Release group 01 is used for Purchase requisitions and 02 for Purchase orders.
Here assign class "PR_Release_proc" against release code "01"
check "OvRelPReq" indicator for over all release (All line items )of document in one shot else it will be released line item wise.
2.Release codes
Release codes are assigned to Release groups, in Workflow these release codes are tagged to users' SAP IDs through which they will be able to approve or reject a PR in SBWP(Inbox in SAP Business workplace.
PRs are released by users in transaction code ME54N.
Eg
Type of user            - Level -             Release code
PR creator - clerk or Business user -
Approver    - Supervisor                 -   R1
Approver -   Project Lead              -   R2
Approver   - Asst. Manager             - R3
Approver   - HOD/General Manager - R4
Release codes R1 to R5 are assigned to corresponding users.Manager R4 can only approve the PR if prior approvals till R3 are completed else not in ideal situation.
For detailed info please refer
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
3. Release Indicator:
Release indicators show the release status of a Purchase Requisition.
For detailed info please refer SAP Help official site
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
4.Release Pre requisites:
These define the order in which individuals or departments release the PR in sequence.
3.Release strategies
Create a new release startegy eg ."A1" or "U1" , write its description PR release for value >1 lakh
Now select release codes according to the Chart of Authority set by your client.
Eg.
Release startegy " A1 - PR release for value >1 lakh"
R1 - Supervisor
R2- Project Lead
R3- Asst. Manager
R4- General Manager
Now click on" Release Prerequisites "push button and check all the boxes in ascending order.Save the document
click on "Release statuses" push button, check release statuses then click on "Continue" push button.
In third push button you can maintain CLASSIFICATION data or later you can directly mainatain in transaction code CL20N for this strategy.
Classification data for example
1. Value - > 100000
2. Plant - 1000,2000,3000 etc
3. Purchasing groups - 101,102,103 etc
By clicking on "Release Simulation" push button you can check whether release is getting affected for configured release codes or not.
In this way you can configure all the required Release startegies.
Now create a PR in T code ME51N with the above conditions then a new tab will appear in PR creation screen at the time of check.Save the document and this can be released by respective users in TCode ME54N.
Tcode - ME54N - For Individual Release
Tcode - ME55 - For Collective Release
For detailed info please visit SAP HELP website
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Regards,
Indranil

Purchase Order Item Text

Hi..
I need to have an report similar to the Output as in the ME2l ( Purchasing Documents per Vendor ) along with a field ( Long Item Text Field in the PO)
added to the report. I am not sure how i should proceed further...
Can anyone of please guide me how to proceed further...
Thanks
Balaji

Hi Anji...
Thanks for the Logic. As you said i went into the Goto --Header and i got the below info.
Text name       950001604400001
Language        ES
Text ID         F01 Item text
Text object     EKPO       Purchasing doc. item texts
Now this info has to be passed on to the Functional Module READ_TEXT.
and the text obtained should be plugged in the Loop of EKPO Internal table.
Can you say me how to look at the Internal Table of the Std Report ( ME2L)..
Thanks for the support ..
Regards
Balaji

Customer Subscreen for Purchase Requisition

Hello All,
I need a custom subscreen on requisition at <b>HEADER</b> level. 'MEREQ001' adds a screen at item level. Is there any Screen Exit / BADI to add a custom screen at header level? Any kind of help is really appreciated.
Thank you all,
Chandni

Hi Chandi Reddy,
The t.code is ME51 For this available exits are :
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting
LMELA010 Inbound shipping notification: Transfer item data from
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Rece
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition rel
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requi
M06E0004 Changes to communication structure for release purch. d
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., previe
MEFLD004 Determine earliest delivery date f. check w. GR (only P
MELAB001 Gen. forecast delivery schedules: Transfer schedule imp
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toler
MM06E001 User exits for EDI inbound and outbound purchasing docu
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into P
MM06E008 Monitoring of contr. target value in case of release or
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound proces
MMAL0004 ALE purchasing info record distribution: Inbound proces
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001
For t.code we51n the available exits and badi are :
Enhancement/ Business Add-in            Description
Enhancement
MEREQ001                                Customers' Own Data in Purchase Requisition
Business Add-in
ME_COMMITMNT_PARKING                    BAdI for Redefining Commitment Interface When Parking
ME_MEREQ_PARKING                        BAdI Purchase Requisition: "Hold"
ME_REQ_HEADER_TEXT                      Copy Header Text: Enjoy Purchase Requisition
o.of Exits:          1
o.of BADis:          3
Rewards some points.
Rgds,
P.Naganjana Reddy

Table for Purchase Requisition Item Text

Similar Messages

Maybe you are looking for