Table For Role relevant TCodes & its Description

Hi,
There is any Table to get the Details of TCodes available in particular Role with its description.
If table is not there,There is any simple method to get TCode details with role.
Pls help me.Thanks in Advance.
Regards
Karthika

Hi Karthika,
Use table AGR_PROF to get profiles for the requried roles.
and run the table USTSTCAP, from this table you can get Tcodes for the profiles...
hope this information can help you.
thanks,
kishore

Similar Messages

  • Table for TDS sections and its description

    Hi,
    Is there any table where both TDS section and its description is getting stored? If this is possible can we relate the same to Vendor through any link?
    Thanks & Regards,
    Tapan

    HI
    J_1ITDSSEC is the table for TDS section and description.
    TDS sections will be assigned to tax codes, so you can link through tax codes whatever is assigned to a vendor.
    Relation will be -- Vendor-- Taxcode--tDS section.
    Cheers
    Mukta

  • Tables for Defect type and its description while defect recording for a MIC

    Dear Experts,
    Kindly suggest the tables name  in  system by which we can get Defect type and its description that we have used while  performing defect recording for a MIC in system at the time of result reording for an inspection lot.
    Thanks in advance for your inputs ...
    Best regards ,
    Nitishj

    hii,
    Check
    QPAC - Inspection catalog codes for selected sets
    QPAM - Inspection catalog selected sets
    QPMK-CODEQUAL- Defect code grp for rejection at MIC level
    Link above table field name with QAVE for UD code & QAMR for Results recording
    Edited by: Lokesh K on Sep 29, 2010 10:43 AM
    Edited by: Lokesh K on Sep 29, 2010 10:45 AM

  • Table for role description

    Hello All
    I can't find the right table for role description.
    Can someone tell me the table name showing role description ?
    Thanks &
    Regards
    CB

    I've finally find it, it's AGR_TEXTS

  • Table for Role & Authorization group

    Hi Gurus,
    I am looking for a table or FM to get all roles for Authorization group.
    I tried in SUIM tcode but could not able to find exact DB table for these.
    Giri
    P.S.: To Moderator:
           My earlier thread was locked for the same question, I was searching in SDN and google from last 3 days and could not able to find enough information on it. AGR_USERS, TBRG, TACT are the tables i found. But still there is a link missed between Role & Authorization Group.

    Thomas,
    My report have selection screen with Auth group and user.
    If user provides Auth. Group then need to find all roles linked to auth group and users assigned to that role.
    In my investigation, there is link between Auth. Group <--> Auth. object.
    Also Auth. Object <--> Role.
    but still there is a fine link missing between Auth Group <--> Role.
    For Eg: Auth Object S_TABU_DIS will be associated to all Auth. Groups but assigned to only limited roles.
    I tried to debug the SUIM transaction multiple times but couldn't find the tables to find the link and not able to find the FM's.
    if anybody have any idea to find that link between Auth. Group & Role then it will be helpful....
    Giri

  • Tables for Role Name created through Tcode pfcg

    User would Input Role Name and to that what users are attach and what value they are authorized to u2026?? Is there function module to this..

    Hi,
    Use this table AGR_USERS                      Assignment of roles to users
    or try this FMs
    CNV_GET_USER_ROLE
    ROLE_ANALYSE_FOR_USER
    Regards,
    Jyothi CH.

  • TABLE for roles !

    Hey a quick question --> which is table that gives all the roles and who created them? I did try a list of AGR* but nothing mentioning this.I treid the SUIM too that too says none !
    Thanks

    >
    george G wrote:
    > Hey a quick question --> which is table that gives all the roles and who created them? I did try a list of AGR* but nothing mentioning this.I treid the SUIM too that too says none !
    >
    > Thanks
    I always enjoy reading your questions.  It's like watching American Idol, you never know what you get...

  • Master table for Qualification ID (In SERVICE Product)

    Hi friends,
    Could you please help me out with master table for Qualification ID and its description?
    Thanks,
    Debasish

    HRP1000

  • Where  can i find table for field condition rating

    hi all ,
    where  can i find table for field condition rating& its decription, please help me
    thanks in advance to all

    Hi Jurgen
    thanks for the Quick reply and what shoud be the table for the field
    gopal

  • Base tables for datasource 1cl_obat001 ?

    hi all ,
    how to know the base tables for   datasource 1cl_obat001 ?
    Thanks

    HI ,
    Ok fine , its a classification datasource , its is generated one ,you can find the details in the table CLBW_SOURCES
    in your source system (ECC ) ,
    Provide the datasource name in the infosource field , and the field OBTAB shows the source table for the extractor
    Hope its clear,
    Regards,
    Sathya

  • TABLE FOR DIVISION AND ITS DESCRIPTION

    Dear Mates,
    My client wants to add a Division and its Description to the Z report -Daily Collection Report from Customers.
    Can anybody help out for table name and its fields for Division and Description
    Thanks in anticipation
    Subbu

    Hi,
    I guess your question is about divisions within a Sales Organization. The related tables are listed below:
    TSPAT - organizational unit: Sales Divisions (Text)
    TVTA - Organizational Unit: Sales Area(s)
    TVKOS -Organizational Unit: Divisions per Sales Organization
    Hope you find the information relevant and useful. If so, please close the message.
    Muraleedharan.R

  • Table for view and its description

    Hi,
    Is there any table which can have the view and its description in R/3?
    These views are primarily used in Generic extractor Definition!
    I am preparing a list of the views used in Gneric extraction and for that i need the description of the view in question!
    Raj

    Hi,
    I have nearly 1200 Views .
    It is just not possible to enter each entry of the view and to know the description manually.
    I know that we can find the description in SE11. but if there is a table which can have the viewid along with the description  my job is lot easiler.
    Any ideas?
    Raj

  • Text table for long text of product catalog area and product description

    Hi experts,
    I'm a new comer in CRM, what my current job is to do the translation for CRM system and its portal, e.g. webshop.  Now I met some questions as below, Could you please give me some advices?
    1. Long text for product catalog area (t-code: COMM_PCAT_ADM; Product Catalog: PCSHOP)
    I found a  table named STXL(STXD SAPscript text file lines), maybe, it is related to the long text(product catalog area), but I can not get anything from the field CLUSTD of the table STXL as  its data type is RAW. Maybe, there is a text table in CRM to store these long text information, but I dont know, Could you please give me some ideas?
    2. Long text for product description (t-code: COMM_PCAT_ADM; Product Catalog: PCSHOP)
    I found a table named COMM_CFGLNGTXT(Long Texts for Different Objects),  I can find some long texts(product description) in this table, but some others, I can not find them. I dont know why? Maybe it is not a correct text table. Could you please give me some advices?
    Thank you very much.
    Quanyin

    Hi Uwe,
    Implement the BADI DOC_PERSONALIZE_BCS and use method PERSONALIZE_DOCUMENT. In this method therz an parameter FLT_VAL, this can be used to derive the description.
    Award points if its useful....
    Regards,
    B Raju

  • Table for loyalty management reward rule with description

    Hi All,
    Could anybody of you please tell me which is the table where I can see the reward rule ID along with its description?. Or at least where the description comes from?.
    Please note that,
    CGPL_PROJECT is the table which has reward rule id but no description.
    I found the type of description CRM_MKTPL_IB_RRL_TEXT via GENIL_MODEL_BROWSER. However this is not used in any tables.
    All helps highly appreciated.
    Thanks,
    Faisal

    Hi Faisal,
    Please find the table : CGPL_TEXT
    we have TEXT1 is the filed which is meant for description.
    You can pass GUID and you will get description.
    Thanks,
    Prabhanjan Reddy G

  • I need the sap bw table names for ROLE's

    I need the sap bw table names for ROLE's .
    thanks

    Hi,
    AGR_1251 - Authorization data for the activity group
    AGR_USERS - Assignment of roles to users
    AGR_TCODES - Assignment of roles to Tcodes
    You can also try putting AGR* in ur search.
    -Vikram

Maybe you are looking for

  • Do I need a mount to instal a 2.5 inch solid state drive in my iMac?

    Hello all, I need to replace the hd in my iMac and was thinking of replacing it with a solid state drive. I found a 2.5 inch hard drive but before I purchase the drive I was wondering if I am going to need a different mounting plate as well? The driv

  • Runtime error in '/' application???

    Only when I try to login to my Myspace account do I get this error... It just started. Had no problem until yesterday. Can anyone help?

  • How to send a mail while saving va02

    Hi experts, i have to send a mail while saving the VA02. The mail id s are maintained in Custom table based on the plant. Regards Ramakrishna L

  • Structural authorization with Context Solution

    Hey Guys, I have a requirement. For an example, I would like to restrict IT 0001 access for write access. A Manager should have read and write access to IT 0001 only for personnel#s under his org unit (for which he has a 'chief' position). For other

  • How to add data

    hi everyone ! i have created a view object based on 2 entities objects (EMP and Departaments of hr schema) but i have also modified the sql query of the view in this way : SELECT Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Emplo