Table for seeing the Views maintained for a material in material master

i have maintained CLASSIFICATION view for certain materials, but when i go to table MARC and check the maintenance status, i cannot see the letter "C" which stands for classification.
I need to sort out the materials for which classifiction view has been maintained.
Is there any other way to do it?
Pls help
Thanks
Neeraj

Hi
U Can check the status of Veiws maintained in  MSTA
The views are
A Work scheduling
B Accounting
C Classification
D MRP
E Purchasing
F Production resources/tools
G Costing
K Basic data
L Storage
P Forecasting
Q Quality management
S Warehouse management
V Sales
X Plant stocks
Z Storage location stocks
thanks

Similar Messages

  • Table to see the line items for cost center-ECC 6.0

    Hi,
    Which is the table to get the line items in controlling with cost center & WBS information.
    Regards,
    Vipin

    Check with below tables :
    COSS, COSPP, COSSP, COSL, COSR ,COSP.
    Check with below link
    http://www.sap-img.com/financial/important-tables-in-sap-co.htm
    Thanks
    Seshu

  • When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed.

    When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed. Iphoto '08 has worked perfectly for years. Suddenly it's balky~

    Have you tried moving the thumbnail size slider at the botton on the screen?
    LN

  • Table Name to see the Document Flow for Service Order - T. Code IW33?

    Hi,
    can u advise the Table Name to see the Document Flow for Service Order - T. Code IW33?
    Ravi.

    Hi,
    From SERVICE ORDER you cant get the INVOCIE NUMBER,
    You will get the SALES ORDER number for that Service order in QMEL table and fetch the Sales order and then goto VBFA to get the Invoice number for the sales order with the DOCUMENT CATEGORY M.
    hope it will serve you.
    thanks,
    santosh

  • List of Views Maintained for Material

    Hi Friends,
    Is there any transaction or table where I can check views maintained for particular Material ?
    I want to see exactly which views are there,as I have seen MM50 where I see some view which are not maintained for that material.
    Please let me know.
    With Best Regards,
    Rajesh

    Hi,
    You can check the field MARA-VPSTA, in which views maintained are shown as follows
    A      Work scheduling
    B     Accounting
    C    Classification
    D   MRP
    E    Purchasing
    F     Prod. resouces/tools
    G    Costing
    K   Basic data
    L  Storage
    P    Forecasting
    Q     Quality Management
    V    Sales
    Z   Storage location stocks
    Y    Plant stock
    Regards,
    Amol

  • SQL reporting - An internal error occurred on the report server. See the error log for more details. (rsInternalError)

    I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
    Error: Sub report cannot be shown.
    An internal error occurred on the report server. See the error log for more details. (rsInternalError)
    When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
    Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
    Any Suggestion/feedback is highly appreciated.
    Thank You.
    The code of the sample RDL is shown below:
    <?xml version="1.0" encoding="utf-8"?>
    <Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
      <DataSources>
        <DataSource Name="DataSource1">
          <DataSourceReference>DataSource1</DataSourceReference>
          <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
        </DataSource>
      </DataSources>
      <BottomMargin>0.25in</BottomMargin>
      <RightMargin>0.25in</RightMargin>
      <PageWidth>11in</PageWidth>
      <ReportParameters>
        <ReportParameter Name="machine_id">
          <DataType>String</DataType>
          <Prompt>machine_id</Prompt>
        </ReportParameter>
        <ReportParameter Name="from_date">
          <DataType>String</DataType>
          <AllowBlank>true</AllowBlank>
          <Prompt>From Date</Prompt>
        </ReportParameter>
        <ReportParameter Name="to_date">
          <DataType>String</DataType>
          <AllowBlank>true</AllowBlank>
          <Prompt>To Date</Prompt>
        </ReportParameter>
      </ReportParameters>
      <rd:DrawGrid>true</rd:DrawGrid>
      <InteractiveWidth>8.5in</InteractiveWidth>
      <rd:SnapToGrid>true</rd:SnapToGrid>
      <Body>
        <ReportItems>
          <Table Name="table1">
            <DataSetName>Main_Report</DataSetName>
            <TableGroups>
              <TableGroup>
                <Header>
                  <TableRows>
                    <TableRow>
                      <TableCells>
                        <TableCell>
                          <ReportItems>
                            <Textbox Name="textbox2">
                              <rd:DefaultName>textbox2</rd:DefaultName>
                              <ZIndex>1</ZIndex>
                              <Style>
                                <TextAlign>Left</TextAlign>
                                <PaddingLeft>2pt</PaddingLeft>
                                <PaddingBottom>2pt</PaddingBottom>
                                <PaddingRight>2pt</PaddingRight>
                                <PaddingTop>2pt</PaddingTop>
                              </Style>
                              <CanGrow>true</CanGrow>
                              <Value>=Fields!syscode.Value</Value>
                            </Textbox>
                          </ReportItems>
                        </TableCell>
                      </TableCells>
                      <Height>0.25in</Height>
                    </TableRow>
                  </TableRows>
                  <RepeatOnNewPage>true</RepeatOnNewPage>
                </Header>
                <Grouping Name="table1_Group1">
                  <PageBreakAtEnd>true</PageBreakAtEnd>
                  <GroupExpressions>
                    <GroupExpression>=Fields!syscode.Value</GroupExpression>
                  </GroupExpressions>
                </Grouping>
              </TableGroup>
            </TableGroups>
            <Details>
              <TableRows>
                <TableRow>
                  <TableCells>
                    <TableCell>
                      <ReportItems>
                        <Subreport Name="subreport1">
                          <Parameters>
                            <Parameter Name="machine_id">
                              <Value>=Fields!machine_ip.Value</Value>
                            </Parameter>
                            <Parameter Name="syscode">
                              <Value>=Fields!syscode.Value</Value>
                            </Parameter>
                            <Parameter Name="from_date">
                              <Value>=Parameters!from_date.Value</Value>
                            </Parameter>
                            <Parameter Name="to_date">
                              <Value>=Parameters!to_date.Value</Value>
                            </Parameter>
                          </Parameters>
                          <ReportName>Holding_Summary_Multi_Period</ReportName>
                        </Subreport>
                      </ReportItems>
                    </TableCell>
                  </TableCells>
                  <Height>0.25in</Height>
                </TableRow>
              </TableRows>
            </Details>
            <TableColumns>
              <TableColumn>
                <Width>10.5in</Width>
              </TableColumn>
            </TableColumns>
            <Height>0.5in</Height>
          </Table>
        </ReportItems>
        <Height>0.75in</Height>
      </Body>
      <rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
      <LeftMargin>0.25in</LeftMargin>
      <DataSets>
        <DataSet Name="Main_Report">
          <Query>
            <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
            <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
    where machine_ip = @machine_id</CommandText>
            <QueryParameters>
              <QueryParameter Name="@machine_id">
                <Value>=Parameters!machine_id.Value</Value>
              </QueryParameter>
            </QueryParameters>
            <DataSourceName>DataSource1</DataSourceName>
          </Query>
          <Fields>
            <Field Name="syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>syscode</DataField>
            </Field>
            <Field Name="display_name">
              <rd:TypeName>System.String</rd:TypeName>
              <DataField>display_name</DataField>
            </Field>
            <Field Name="customer_syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>customer_syscode</DataField>
            </Field>
            <Field Name="account_syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>account_syscode</DataField>
            </Field>
            <Field Name="machine_ip">
              <rd:TypeName>System.String</rd:TypeName>
              <DataField>machine_ip</DataField>
            </Field>
          </Fields>
        </DataSet>
      </DataSets>
      <Code>Shared offset As Integer
    Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
      If reset
        offset = pagenumber - 1
      End If
      Return pagenumber - offset
    End Function
    </Code>
      <Width>10.5in</Width>
      <InteractiveHeight>11in</InteractiveHeight>
      <Language>en-US</Language>
      <PageFooter>
        <ReportItems>
          <Image Name="image1">
            <Sizing>Fit</Sizing>
            <Left>8.875in</Left>
            <MIMEType />
            <Width>1.5in</Width>
            <Source>External</Source>
            <Style />
            <Value>bottom_right_logo.gif</Value>
          </Image>
        </ReportItems>
        <Height>0.5in</Height>
        <PrintOnLastPage>true</PrintOnLastPage>
        <PrintOnFirstPage>true</PrintOnFirstPage>
      </PageFooter>
      <TopMargin>0.5in</TopMargin>
      <PageHeight>8.5in</PageHeight>
    </Report>

    i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
    when i click on manage for .rdl file, its throwing error , as
    "An internal error occurred on the report server. See the error log for more details. (rsInternalError)
    Object reference not set to an instance of an object.
    please help me with this

  • Failed to retrieve a schema URI (document namespace) for /userprofiles/emailNotification.usr; please see the following exception for details

    I get this exception (and long stack trace) when attempting to start my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm using Oracle 8.1.7. I upgraded this application from weblogic portal 4.0, and never had this problem there. As part of the migration process, I ran the tool to migrate all of the database tables, and I re-synched the EBCC project using version 7 of EBCC. I did a search for this problem and found a few mentions of it that seemed to be related to Oracle's handling of CLOB data. Apparently, there is a patch, but I can't seem to find this patch. I'm also not sure if this is indeed the problem since I didn't have this issue with the older version of weblogic using the same database. Any suggestions?

    If you have a support contract please open a case so we can work through
    this problem.
    Can you run an sqlplus session on your database, execute the commands
    "delete from data_sync_item" and "commit", then resync to see if it will
    get you around the problem. The data_sync_item table will be fully
    populated after you sync. This should get you running.
    Between 4.0 and 7.0 the DefaultRequestPropertySet.req file was reduced
    in size -- the CLOB would be smaller in the data_sync_item table.
    I would recommend using the Version Checker against your installation --
    find it on the dev2dev.bea.com site to see if the upgrade installer work
    ed properly. Also consider running the full installer to avoid possible
    problems that might occur with upgrade installers.
    As a result of that patch you referenced in 4.0 the CLOB handling logic
    was changed in 7.0 -- this is why it is strange you are seeing cleaving
    errors. In 7.0 SP2 to be release next week the data sync and
    persistence code was changed also.
    Are you using the OCI or Thin driver?
    -- Jim
    Rob Goldie wrote:
    Jim Litton <replyto@newsgroup> wrote:
    Rob,
    The CLOB issue was related to wlportal4.0 and should not be a factor
    in
    7.0.
    Could you post the entire stack trace?
    ####<Jan 27, 2003 4:21:47 PM EST> <Warning> <Data Synchronization> <PFIDEV5> <pfeAricept1Server>
    <main> <kernel identity> <> <000000> <Application: gmiAriceptApp; Failed to retrieve
    a schema URI (document namespace) for /request/DefaultRequestPropertySet.req;
    please see the following exception for details.>
    Exception[com.bea.p13n.management.data.doc.DocumentProcessingException: Unable
    to analyze and/or cleave document]
         at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:94)
         at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
         at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
         at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
         at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
         at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
         at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
         at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
         at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
         at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
         at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
         at weblogic.j2ee.Application.addComponent(Application.java:294)
         at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
         at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
         at $Proxy9.updateDeployments(Unknown Source)
         at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
         at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
         at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
         at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
         at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
         at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
         at weblogic.Server.main(Server.java:32)
    Caused by: org.xml.sax.SAXException: No message available. Resource not found:
    repository.cleaver.no.xsi.namespace.exception Resource bundle: com/bea/p13n/management/data/datasync
         at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.mapNamespaces(DocumentCleaver.java:135)
         at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.startElement(DocumentCleaver.java:235)
         at weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1384)
         at weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValidator.java:1299)
         at weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentScanner.java:1821)
         at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:964)
         at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
         at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
         at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
         at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
         at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:80)
         at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
         at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
         at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
         at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
         at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
         at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
         at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
         at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
         at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
         at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
         at weblogic.j2ee.Application.addComponent(Application.java:294)
         at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
         at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
         at $Proxy9.updateDeployments(Unknown Source)
         at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
         at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
         at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
         at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
         at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
         at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
         at weblogic.Server.main(Server.java:32)
    Are you using a UTF-8 Oracle database?
    Yes
    If you create a new User Profile in the EBCC and compare it to your
    migrated .usr file do you see differences in the DTD's?
    I recreated a new version of the .usr in the EBCC, and still got the same error.
    I also tried deleting everything from the data-sync-item table and re-synching.
    What does the DocumentManager section of your application-config.xml
    look like?
    <DocumentManager
    ContentCacheName="documentContentCache"
    ContentCaching="true"
    DocumentConnectionPoolName="default"
    MaxCachedContentSize="32768"
    MetadataCacheName="documentMetadataCache"
    MetadataCaching="true"
    Name="default"
    PropertyCase="none"
    UserIdInCacheKey="false"
    />
    What does the document.jar Targets="" parameter look like in config.xml?
    <EJBComponent Name="document" Targets="pfeCluster" URI="document.jar"/>
    -- Jim
    Rob Goldie wrote:
    I get this exception (and long stack trace) when attempting to start
    my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm
    using Oracle 8.1.7. I upgraded this application from weblogic portal
    4.0, and never had this problem there. As part of the migration process,
    I ran the tool to migrate all of the database tables, and I re-synched
    the EBCC project using version 7 of EBCC. I did a search for this problem
    and found a few mentions of it that seemed to be related to Oracle's
    handling
    of CLOB data. Apparently, there is a patch, but I can't seem to find
    this patch. I'm also not sure if this is indeed the problem since I
    didn't have this issue with the older version of weblogic using the
    same database. Any suggestions?

  • Where to see the transaction code for a script

    Hai my dout is  where to see the transaction code for a script after assigning to  a drive programm for example i see output for medruck in me11 and for other standard scripts where can i see the  output is there any table avaible to check it

    Hi masthan,
       for sd and mm related scripts. u can use tnapr.
    Otherwise go to nace transaction u can find the script name as well as program name.
    Or u can try with TSTC table, which will give the t/c's.
    Regards...
    Arun.

  • How to see all statuses maintained for campaigns in Customization.

    Dear all,
    Where can we see all statuses maintained for Campaign in Customization.
    Under Basic Data in Campaign Screen, I can see Open, Approved and Released campaigns but when I search for these campaigns in customization, I couldn't find.
    Where we are maintaining these statuses and how we assigning it to the Campaign Object.
    Your suggestions will be highly appreciated.
    Best regards
    Raghu ram

    Hi,
    I have checked there(Transaction CRMBS02), but I can not see the system statuses over there.
    How can I see the following system statuses visible in campaign-->Basic Data Screen.
            Created
    ·        Released
    ·        Finished or Rejected
    ·        Locked
    ·        In Process
    ·        Approved
    Your help will be highly appreciated.
    Best regards
    Raghu ram

  • Report where i can see the invoice price for every material

    Dear.
    In purchase order history of me22n I can see the invoice price for every purchase order material.
    Do you know a massive report where i can see the invoice price for every material ?
    Thanks.

    hi,
    Check few below options:
    1. MIR6 / MIR5 - For the invoice overview and list of invoice documents...
    2. If access to SE16, then check table EKBE
    3. ME1P : Purchase order price history...
    Regards
    Priyanka.P

  • Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

    Hi all,
    I have TFS2012 and run several projects.
    We encounterwed with such an error while using Build server.
    Overall Build Process
    Initial Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    00:00
    Get the Build
    00:00
    Update Build Number
    Initial Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Final Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Result = Ephone_DIT_Deploy_20150424.1
    01:56
    Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
    Initial Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    00:00
    Get the Build Directory
    Initial Property Values
    Result = d:\temp\217\CTI\Ephone_DIT_Deploy
    01:53
    If Not String.IsNullOrEmpty(ConfigurationFolderPath)
    Initial Property Values
    Condition = True
    01:53
    Run TfsBuild for Configuration Folder
    Initial Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp" 
    00:08
    Getting sources
    00:02
    Labeling sources
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
    00:19
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:10
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    MSBuild Log File
    00:08
    Generating list of changesets
    00:20
    Built Skins\SkinEPhone.cs for default targets.
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
    Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
       at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
       at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
       at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
       at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
       at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
       at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
    00:03
    Creating work item
     Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
    Exception Stack Trace:    at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
       at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
       at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    Final Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    Final Property Values
    Condition = True
    Final Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
    Final Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    Please have a look and guide where to find a problem
    Thanks ahead

    Hi Hooi,
    I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
    From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
    Best regards,

  • How can I get the default value of a particular preference programatically. I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.

    <blockquote>Locked by Moderator as a duplicate/re-post.
    Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
    Thanks - c</blockquote>
    == Issue
    ==
    I have a problem with my bookmarks, cookies, history or settings
    == Description
    ==
    How can I get the default value of a particular preference in FireFox?.
    I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
    I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
    Any help towards acheiving this programtically is greatly appreciated.
    If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
    == User Agent
    ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    Dear Friend,
    Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
    Then you can get the value from the outparameter using callablestatement.getXXX().
    Try that way.
    For free tral versions of JDBC Drivers go to www.Atinav.com

  • How to see the change logs for billing document

    Dears,
    Could you please how to see the change logs for billing document.
    My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
    Thanks in advance
    Ranjan

    hello, friend.
    you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes.  try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
    normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document,  as saving the document after creation will post this to Accounting.  of course, inclusion of a posting block in the billing type will provide you the opportunity for changes. 
    regards.

  • When i try to activate iMessage i could see the comment "waiting for activation" for more than 24hrs.Is this because of mobile device problem or someother issue ? My mobile is just 20 days old

    When i try to activate iMessage i could see the comment "waiting for activation" for more than 24hrs.
    Is this because of mobile device problem or someother issue ?
    My mobile is just 20 days old

    The following discusses that error message and may help: iOS: Troubleshooting FaceTime and iMessage activation

  • How to see the changes made for iPad in iTunes on my iPad?

    How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?

    Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
    Thanks for your help, it works now :-)

Maybe you are looking for

  • Can't Send Email from Iphone Using Pop Account

    I have check our host names, ports, user name, passwords etc (all the account mail settings are OK) for incoming and outgoing servers. I can receive email fine but can't send them back out through the outgoing server. I am using the identical setting

  • How does a record type and table type works

    Hi, How a record type and table type work for the ref cursor, below i m giving an example but its giving me errors can any one help me for this? declare type empcurtyp is ref cursor; type rectype is record (veid t.emp_id%type, vename t.ename%type); T

  • Allow SET button on 6D to change White Balance Preset

    On the EOS 6D right now, there is no fast/easy way to change/set the White Balance. Even my old 30D camera has a WB button where you press it, then rotate the main dial to change the WB presets. On the 6D right now, you can customize the SET button t

  • OC4J Logging into Application.log

    Hi someone, i try to log into the Application.log configure in the orion-application.xml. how can do this in Java? Thanks to all for help Matthias

  • SAPNWRFC on Windows XP

    Hello, Could someone have the sapnwrfc working fine on Windows XP or tell me how to configure it with VC++? I am new in programming with this so i don't really understand how to deal with ... Reagrds. Landryx ...