Table for storage location from MIGO in the index "where"

Hi,
I would like to know the in which table is saved the storage location.
I would like to take the storage location from MIGO in the tab index Where.
Thanks.
Dede

Hi Glen,
If I got it right... You want table MSEG for movement (table T001L for Sto. Location master - tcode OX09).
Cheers.

Similar Messages

  • Table for Storage location name..

    Hi frnds,
    I have a storage location number.. Now how do i find the name or Description for that?
    How to find the table? ,, If anybody knows the table name plz let me know..
    Thank you.
    Sree.

    Hi,
       CHeck Table MARD for storage Location
    Regards,
    Prashant

  • Table for storage location addresses

    Hi
    I am trying to find the table where addresses for storage locations are found. I have found the storage locations in T001L and the addresses in ADRC, but cannot find the link between these tables.
    In which table can I find the link between storage locations and addresses?
    Any help is greatly appreciated.
    Regards

    Hi,
    check TWLAD table.
    Regards,
    Chandra

  • Table for storage location address

    Hi Folks,
    I want to download the list of all storage locations assigned to a very Particular Plant along with its address.
    From which table can this be fetched ??

    Hi
    Goto SE16N
    Enter Table name T001L and press enter
    Enter plant and execute.
    It will display all the storage locations assigned to plant
    Thanks
    Raman

  • Table for storage location stock data

    Hi All,
    I have a report in which i have to pull the data for all storage locations.
    I need to display the Quantity of each material in storage location , Total price of individual materials(amount), and the plant information.
    Thanks:
    Siddharth

    Hi
    Always stock (Quantity and Valu) is always maintained at Plant level as we define Valuation Area as Plant, Now if u want to generate a ABAP report, u can use MSEG and build ur logic with Debit credit indicator, material, sloc etc.
    Best regards
    Vineet Baweja

  • Problem in Address update for storage location via LSMW

    I am trying to update the address of storage location thru LSMW,
    Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
    How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
    Currently my recording only takes me to the create storage location & no LHS 'dialogue structure'  for 'Addressees for storage location'
    Please give the suggestions as I its on urgent for me to update 1000 storage location.

    Dearrrrrrr Prasoooon,
    U got it Right Again!!!!!
    Thank you so much.
    I resolved with above Note & now i can happily go on leave from tomorrow.
    Salute to you!!!!!!!!

  • Table name or report to download materials for storage location

    Hi ,
    Please let me know table name or report or tcode to download material for storage location . I know MARD only. Apart from that table any other please let me knw
    Thanks in advance
    Smitha

    Hello,
    For Material , Plant and storage location report, in SAP Std reports are available.
    1)MC.6
    2)MC.9
    3)MB5b
    4)MB52
    or else get directly from table MARD through SE16 tcode.
    Regards
    Mahesh Naik

  • Exclude stock at a storage location from the Productionn Planning run

    Hi,
    We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
    Please suggest a way so that it is excluded from the Production planning
    Regards,
    Sireesh

    Hi Sireesh,
    Please try these following options.
    1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
    2) Try anyof these user exists
    APOBP011 Enhancement for Stock BAPIs (BUS10504)
    APOCF011 Inbound Processing: Stock
    APOCF027 Customer-Specific Enhancements: Stock
    3) Exclude the category from the ATD receipts category group maintained in the master data
    Regards
    R. Senthil Mareeswaran.

  • Exclude storage locations from the MRP run

    Hi all,
    Is it possible to exclude stock of specific storage location from the MRP run?
    Thanks for your help
    Thomas

    Hi,
    2 things,
    1. In OMIR for the storage location set that this location is excluded from MRP run (if am right the value to be maintained is 1)
    2. In MM02 go to MRP-4 view of the material master, specify plant & the storage location which you want to exclude & in the field SLoc MRP indicator specify that this is excluded for MRP run (if am right the indicator is 1).
    The step 1 ensures that all materials which are extended to this storage location will by default have the value 1. And step 2 ensures the materials already having this storage location view are excluded from MRP run.
    Regards,
    Vivek

  • Default Storage location from the Material master

    Can we default the storage location from the material master into the reservation line item in trasaction MB21?

    enter the production storage location in material master MRP2 view.
    Edited by: Jürgen L. on May 7, 2008 6:52 PM

  • HU Configuration for Storage Location

    Hi everyone.
    In the following point of config, there is something I do not understand.
    I hope somebody can explain it to me.
    HU Requirement for Storage Locations and Default Values for Deliveries
    Are the Vendor and Customer needed in this table?
    If they are, what purpose do they serve? What are they needed for?
    And again, if they are, do they represent the Plant? or what?
    Should they be created with special characteristics?
    I know a lot of questions, But I do not understand.....
    Thanks,
    Alain

    Hello Alain,
    When you are making the storage location is HU managed, and when you try to execute any IM transactions like stock transfer, transfer posting, system doesn't directly post a material document unlike in regular non HU managed locations.
    For example if you try to execute MB1B-311 from HU managed location to non HU location, system tries to create an outbound delivery document. And to create this outbound delivery document you need a customer and this is the place where system gets that customer information. Same is the case for vendor in inbound delivery.
    And it doesn't require to create deliveries all the time if you want to execute these inventory transactions. VLMOVE transaction can be used to posting material document without deliveries.. But not all business scenarios will use VLMOVE as it has its own limitations.
    Regards
    Gopal

  • Negative stock  for storage location M7 021

    Hello
    I use negative stock for some materials
    When I want to post document in MIGO - 551 scrapping, I have error message M7 021: Deficit of BA Unrestricted-use 1.100 EA:   24000641 XXXX 9999 YYYYYYY
    This is ERROR. When I change storage location from 9999 to 0002 message have status WARNING.
    I set - allowed negative stock in material master data MM02 and for plant in WB02
    Where should I set "allowed negative stock" for storage location, because I need warning for location 0002?
    Could You help me?
    Thank You in advance
    Arek

    Go to SPRO>MM>IM>Goods Issue/Transfer posting>Allow negitive stock allowed for plant and then chose the plant and then go for the storage location --> mark the same.
    If use ful award points

  • Default Storage location from PO to GR

    Dear All,
    How i can made storage location from to come automatic while i am doing the GR through MIGO movement type 101, but it should be changeable but main thing it should appear from PO while i am doing GR.
    regards,
    qsm sap

    Hi,
    First Storage location should be extended in Material master.
    Then you can include this Storage location in PR . If you are creating PO based on PR then it will copy to PO.
    While doing GR in MIGO with respect to PO the system will default this Storage location & stock will be posted to that Storage location.
    If you extended in Material master but not inputed in PR/PO system will not default in MIGO.
    One other option is In IMG settings if you set the checkbox set storage location automatically.
    Then in MIGO you can directly choose any storage location which is created for your plant.(Make sure the str loc should be part of Plant)
    No matter if you extended in material master/PR/PO
    rgds
    Chidanand

  • QM exclude storage location from QM

    Dear All,
    is it possible in some way to exclude a storage location from QM in a plant managed with QM.
    The case is this:
    We have the material AAA with QM active for good receipt.
    -If the material arrive in st. location 10 we want have stock in Q status.
    -If the material arrive in st. location 20 we want have stock in Free status.
    St location 10 and 20 belong to same plant.
    If it is not possible, do you have some suggestion to solve this case (u.exit?)?
    Thanks in advance. Best regards.

    Tanks,
    but finally we have used another u.exit, EXIT_SAPLQAAT_002.
    This one is called directly in the MIGO and allow to deactivate QM setting X in the parameter NO_INSPECTION.
    Best Regards.
    Alby

  • Excluding storage location from MRP run in Long Term Planning

    Hi,friends,
         In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
    Regards
    Joey

    Hi,
    Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
    ==========================================================================
    Symptom
    In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
    The storage locations excluded by MRP or planned separately are also planned in the plant segment.
    Additional key words
    LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
    Cause and prerequisites
    The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
    The long-term planning occurs exclusively at plant level.
    Solution
    This is no error. The system works as intended.
    The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
    This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
    ==========================================================================
    Regards,
    Siva

Maybe you are looking for

  • How can I create subfolders in Mac Mail for an Exchange account?

    I use Mac Mail on OS X 10.8.4 to download my Exchange mail, which is hosted on Office 365. I can create folders inside existing subfolders in my Inbox, but if I try to create one as a first-level subfolder of the Inbox the option does not exist. Inst

  • Hooked up to internet?

    I am producing a Cap4 project that will be installed on laptops that may or may not be connected to the Internet.  Would it make more sense to publish as an .exe file or html.  If html, does the laptop have to be connected to the Internet?  Also, the

  • Unreverse a reverse document (or voided check that was cashed)

    The company reversed a payment document but did not void the check. The check was later cashed by the vendor. The company subsequently mark the check as voided but the check has already the bank. What to do now? The best solution is to unreverse the

  • Does not copy new text

    If I try to copy some text from somewhere and paste it, it does not paste. instead, the previous item that i copied appears. This is so so so annoying. I never expected Apple iOS would be this glitchy. Where is the PERFECTIONISM and the SIMPLICITY? E

  • Lightroom 3.4 undoing settings / ratings after save in Photoshop

    Lightroom used to retain my settings / adjustments in Lightroom, regardless of edits in Photoshop. For example, I would do color correction, and vignetting in Lightroom but do skin blemish retrouching in Photoshop. Before I was able to edit in Photos