Table for Storage location name..
Hi frnds,
I have a storage location number.. Now how do i find the name or Description for that?
How to find the table? ,, If anybody knows the table name plz let me know..
Thank you.
Sree.
Hi,
CHeck Table MARD for storage Location
Regards,
Prashant
Similar Messages
-
Table for storage location addresses
Hi
I am trying to find the table where addresses for storage locations are found. I have found the storage locations in T001L and the addresses in ADRC, but cannot find the link between these tables.
In which table can I find the link between storage locations and addresses?
Any help is greatly appreciated.
RegardsHi,
check TWLAD table.
Regards,
Chandra -
Table for storage location address
Hi Folks,
I want to download the list of all storage locations assigned to a very Particular Plant along with its address.
From which table can this be fetched ??Hi
Goto SE16N
Enter Table name T001L and press enter
Enter plant and execute.
It will display all the storage locations assigned to plant
Thanks
Raman -
Table for storage location from MIGO in the index "where"
Hi,
I would like to know the in which table is saved the storage location.
I would like to take the storage location from MIGO in the tab index Where.
Thanks.
DedeHi Glen,
If I got it right... You want table MSEG for movement (table T001L for Sto. Location master - tcode OX09).
Cheers. -
Table for storage location stock data
Hi All,
I have a report in which i have to pull the data for all storage locations.
I need to display the Quantity of each material in storage location , Total price of individual materials(amount), and the plant information.
Thanks:
SiddharthHi
Always stock (Quantity and Valu) is always maintained at Plant level as we define Valuation Area as Plant, Now if u want to generate a ABAP report, u can use MSEG and build ur logic with Debit credit indicator, material, sloc etc.
Best regards
Vineet Baweja -
Table name or report to download materials for storage location
Hi ,
Please let me know table name or report or tcode to download material for storage location . I know MARD only. Apart from that table any other please let me knw
Thanks in advance
SmithaHello,
For Material , Plant and storage location report, in SAP Std reports are available.
1)MC.6
2)MC.9
3)MB5b
4)MB52
or else get directly from table MARD through SE16 tcode.
Regards
Mahesh Naik -
HU Configuration for Storage Location
Hi everyone.
In the following point of config, there is something I do not understand.
I hope somebody can explain it to me.
HU Requirement for Storage Locations and Default Values for Deliveries
Are the Vendor and Customer needed in this table?
If they are, what purpose do they serve? What are they needed for?
And again, if they are, do they represent the Plant? or what?
Should they be created with special characteristics?
I know a lot of questions, But I do not understand.....
Thanks,
AlainHello Alain,
When you are making the storage location is HU managed, and when you try to execute any IM transactions like stock transfer, transfer posting, system doesn't directly post a material document unlike in regular non HU managed locations.
For example if you try to execute MB1B-311 from HU managed location to non HU location, system tries to create an outbound delivery document. And to create this outbound delivery document you need a customer and this is the place where system gets that customer information. Same is the case for vendor in inbound delivery.
And it doesn't require to create deliveries all the time if you want to execute these inventory transactions. VLMOVE transaction can be used to posting material document without deliveries.. But not all business scenarios will use VLMOVE as it has its own limitations.
Regards
Gopal -
Report for Storage location wise Stock with value..?
Hi guru's
Can anybody explain me what is T.code i want to use to get a report for STORAGE LOCATION STOCK with VALUE..?
Urgent reply me ..
Thanks
sap-mmSorry Mr chetan,
I want to see only the stock available in my company with Value and storage location wise..
Please try to get report for this
Thanks
sap-mm -
System asking for storage location in case of Asset GR,
dear all,
In our case system is asking for Storage Location in case of Asset GR, though PO was account assigned.
I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
Pls guide,
Regards.Hi,
Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
Reg
dheeraj -
Use of Vendor and Customer in 'Define Shipping Data for Storage Location"
Under the stock transfer order configuration, there is a IMG step <b>"Define Shipping Data for Storage Location".</b>
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
<b>But I am not able to figure out what's the use of VENDOR number we are specifying in this step.</b>
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
<b>Also I need to know what vendor account group I will use for creating this storage location vendor.</b> I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
<b>So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.</b>
ThanksHi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L -
Negative stock for storage location M7 021
Hello
I use negative stock for some materials
When I want to post document in MIGO - 551 scrapping, I have error message M7 021: Deficit of BA Unrestricted-use 1.100 EA: 24000641 XXXX 9999 YYYYYYY
This is ERROR. When I change storage location from 9999 to 0002 message have status WARNING.
I set - allowed negative stock in material master data MM02 and for plant in WB02
Where should I set "allowed negative stock" for storage location, because I need warning for location 0002?
Could You help me?
Thank You in advance
ArekGo to SPRO>MM>IM>Goods Issue/Transfer posting>Allow negitive stock allowed for plant and then chose the plant and then go for the storage location --> mark the same.
If use ful award points -
Tables for Functional location/equipment in Sales Area
Hi ,This is sivakumar ...
h2.
I wanna know Tables for Functional Location/equipment in Sales area under the Customer Service erena.I know the sales order number, header and item ..
I need other parameters to use this table.... -
Problem in Address update for storage location via LSMW
I am trying to update the address of storage location thru LSMW,
Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
Currently my recording only takes me to the create storage location & no LHS 'dialogue structure' for 'Addressees for storage location'
Please give the suggestions as I its on urgent for me to update 1000 storage location.Dearrrrrrr Prasoooon,
U got it Right Again!!!!!
Thank you so much.
I resolved with above Note & now i can happily go on leave from tomorrow.
Salute to you!!!!!!!! -
Classification System for Storage location
Hello,
I would like to know if you can apply the classification system (as we know it well from the material master), to classify the storage location configuration. I need this for a client who wants to analyze his information system with the possibility to drilldown the characterics of his storage locations. But to do this, he first would have to apply the classification system to these storage locations, but I can not figure out if it is possible, and where to customize it.
Thank you in advance for your help,
Dominik Ley
DTI Consultores
Chileyk,
perhaps it is even some kind of weird, but for 2 reasons I dared to make the question:
- Classification system is a cross-application component (Material Management, Project System, etc.), so why not for something like storage location.
- For Plants you DO HAVE this classification. Go to CL02 and have a look on matchcode of 'Class type' field. So, my idea was to check if there was something similar for storage location.
If you do have any other idea, or anyone else, I appreciate a lot your help.
Regards,
Dominik Ley -
MRP Relevance for Storage Location
All SAP Gurus,
In SPRO where we need to maintain MRP Relevance for Storage Location?
Regards,Dear,
Check transaction OMIR - Storage location - MRP relevance.
In detail:
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run follow the steps:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. 1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not. You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards,
Syed Hussain.
Edited by: Syed Hussain on Sep 20, 2008 12:51 PM
Maybe you are looking for
-
Hello, our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well. ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI). Is it possible to use variant
-
Hi, Scenario: I have to Count --> Profit Making Deals on KF BOOK_VALUE. KF: BOOK_VALUE Char: UPDATE_TYPE so for Profit Making Deals I have to Restrict BOOK_VALUE on UPDATE_TYPE with DBT_B001(Profit). then I have to Count. what is the procedure and wh
-
Why would I get an operation not allowed message when I try to do a ripple delete? There are 4 video tracks I have them all selected and mark and in and an out. Then shift delete and I get the error message. Help.
-
DSPCon is looking for a Software Engineer/LabVIEW-based application development
E-mail resume to [email protected] Please Visit Our Web-Site for full job description. www.dspcon.com DSPCon specializes in the development of real-time data acquisition and analysis systems for use in a variety of Digital Signal Processing intensive
-
How do I find and accept the end user agreement?