Table for system status
Hi,
Does anyone know in which table, does the CRM register the status (and the previous status history) for a service order at header leavel. (in the r/3 system it's the vbuk table).
Thanks in advance.
Hugo.
Hi,
check table CRM_JEST with the service order's GUID.
Regards
Wolfgang
Similar Messages
-
Table for system status for an order
Hi Gurus,
we are displaying a report in which list of orders we are displaying in that system status also we need to dispaly for that the logic we have used is take OBJNR from AUFK by passing AUFNR and get all the active status for that AUFNR by passing AUFNR in to JEST by setting the inactive status is equal to space and then by comparing those system status with table TJ02 and we are taking the system status codes from that table. But my requirement is to display the user status in the order how we will get in order screen? In JCDS table am getting the entries based on date and time but unwanted status also it is showing. tell me is there any way to get the exact order how we will get in the order screen.
Thanks in advance.
Regards
SatishHi,
Its client requirement. we need to show list of orders in a alv report for a particular selection. There for each and every order we are displaying the system status but it is not coming in proper sequence as compared with the order screen system status.
Please do the needful.
Regards
satish -
Tables for Opportunity "Status" and "Reason"
Hi,
Can someone help me in finding the tables for determining "Status" and "Reason" for an opportunity along with the relvant text descriptions?
Regards,
SandeepHi Sandeep,
Status- code in field stat of CRM_JEST table
OBJNR = guid opportunity
INACT = SPACE
Text of status in TJ30T with your status profile
Reason- code in field code of CRMD_SRV_SUBJECT with
guid_ref equal to guid_set( of crmd_link with objtype_set = 29 )
Text of reason in QPCT
I hope this way help you.
Regards.
Manuel -
Table for user status field in CJ20n transaction project defination
HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1) TYPE c VALUE 'X',
gc_no(1) TYPE c VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
objnr LIKE jest-objnr,
stat LIKE jest-stat,
END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
objnr LIKE jsto-objnr,
stsma LIKE jsto-stsma,
END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0, "Combination of JEST & JSTO
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE jest-stat,
END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0, "Uer status for all wbs
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0, "User Status text - TJ30T
stsma LIKE tj30t-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
objnr FROM prps
INTO l_objnr
WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
objnr
stat
FROM jest INTO TABLE lit_jest
WHERE objnr = l_objnr AND
inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
objnr
stsma FROM jsto
INTO TABLE lit_jsto
WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
READ TABLE lit_jsto WITH KEY
objnr = l_objnr.
IF sy-subrc = 0.
lit_status-objnr = lit_jest-objnr.
lit_status-stsma = lit_jsto-stsma.
lit_status-stat = lit_jest-stat.
APPEND lit_status.
ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
stsma
estat
txt04 FROM tj30t
INTO TABLE lit_usrtxt
FOR ALL ENTRIES IN lit_status
WHERE stsma = lit_status-stsma AND
estat = lit_status-stat AND
spras = sy-langu.
Let me know if you have any question.
Regards,
RS -
Hi
what is the table for field status. I want to down load data for all the company code field sttus setting in the client. In which table i can get all the fields setting for the field status.
CHEERSHello,
Your question is not clear.
There are number of field statuses in company codes.
You can see the field status groups details in table T004F
If you can elaborate your requirement, I can give you more details.
Regards,
Ravi -
hi
Please tell anybody what is the table for User Status Profile in Sales Orders? where it will stores?
Regards
RajendraHi,
Use table JEST
Here you will have to enter the object number as an input field
Get object number from table VBAK or VBAP based on whether the status profile is attached at sales order header or at sales order item.
Status which is active will start with letter E and the status inactive flag will be blank.
Regards
Ravi -
Table name & field name for System status of an order
Hi,
Can any body pl tell me what is the table name for PM order System status
Regards
AmarDear Amar,
Please check it in JEST table. For that you have to find first OBJNR for order from AUFK or AFPO table for order number & then pass it in JEST so that with INACT = BLANK.
You will get all active system status for the order starting with I.
I hope this will resolve your query.
Regards -
Table for Inventory Status for Serialized materials
Hello,
Can anyone please provide the table name for finding out inventory status (i.e. unrestricted, Quality Inspection, Blocked) for serial numbers. I am trying to find out, in which inventory status does a particular serial# belonging to a particular material# is in?Hello Azz:
Regarding the serial number status, you have to check the combination of three different tables:
EQUI - Equipment master data. In this table make note of the field 'Object number' (OBJNR), which is the primary key for:
JEST - Individual Object Status. This table contains the technical expression of the status in field 'Object status' (STAT), which is the primary key for:
TJ02 - System status. In this table you can find the texts for the system status in the fields TXT04 and TXT30.
Then, here you have some other tables which you might also need:
EQBS - Serial Number Stock Segment.
SER01 - Document Header for Serial Numbers for Delivery.
SER02 - Document Header for Serial Nos for Maint.Contract (SD Order).
SER03 - Document Header for Serial Numbers for Goods Movements.
SER04 - Document Header for Serial Numbers for Inspection Lot.
SER05 - Document Header for Serial Numbers for PP Order.
SER06 - Document Header for Serial Numbers for Handling Unit-Content.
SER07 - Document Header for Serial Numbers in Physical Inventory.
SER08 - Document Header for Purchase Order Item Serial Numbers.
I hope this helps!
Esther. -
Technical Abbreviations for System Status in stwb_2
Hello Gurus,
We have created a custom transaction with different user statuses.
Not able to find, where & how these user statuses are aligned with system statuses.
In service desk, we assign the user status. But when we look at the status report from test plan management screen(stwb_2), it displays the system status.
Some issue with these system statuses that their actual textual representations are not displayed, and instead their technical abbreviations like E0009, E0010, E0011, E0012 are getting displayed.
Can anybody throw some light in solving this issue? Your help will be greatly appreciated.
Thanks & best regds,
Alagammai.Hi Xavier,
Pls ignore my last reply. I have checked in the wrong system. I was able to see the custom transaction created by me. I was also able to see the textual representations as below for the technical abbreviations in table TJ30 as below.
E0009 Fixed
E0010 Retest
E0011 Re-Open
E0012 Closed
FYI, I am able to see the correct textual representations like "Fixed / Retest / Re-Open / Closed" in the crm_dno_monitor screen.
The problem is only when I try to see the same service desk messages from the "Messages Tab" of stwb_work transaction. Hope now I am clear about where I am getting the issue.
Again I am assuring you that the text equivalents are not missed out or blank anywhere. They are present in the table TJ30. Do you have any clue that can solve my issue?
Thanks & Best regds,
Alagammai. -
Field and Table for PGI status updation
Hi All,
I want to know in which field and table the PGI status will get updated.
i.e. once we do the PGI for a delivery in which table will this PGI status gets updated.
Thanks in advance for help.
HariniHi Harini,
In Table VBUK you 3 different status related fields for sales documents.
Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
A Not yet processed ( This means its complete open)
B Partially processed ( This means the sales doc is partially processed)
C Completely processed ( This means the sales doc is completly processed)
Delivery status and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
A Not yet processed ( This means its completly open)
B Partially processed ( This means the delivery doc is partially processed)
C Completely processed ( This means the delivery doc is completly processed)
So overall status can be different then delivery or overall delivery status.
If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
Then over all status field name GBSTK will be B Partially processed and delivery and overall delivery will be C Completely processed .
Regards
vK -
Function Modules for System Status update and reservation for service order
I am sending the service orders data using IDOCS.
once the IDOC is received successfully i need to do 2 things:
1. Update the system status of the service order with the status 'SPV2'.
2. Create the reservation for the service order.
Is there any function modules avilable for both of these process.
If not how i can do these two things in ABAP Code.
please help me out in it.check whether this Fm's helps you
STATUS_CHANGE_INTERN
CO_IH_SET_STATUS_EXTERNAL
CO_IH_STATUS_FM_SET
BAPI_ORDER_CHANGE_STATUS_GET
BAPI_APPREQUEST_SETSTATUSVARNT
BAPI_ALM_ORDER_MAINTAIN
BAPI_RESERVATION_CREATE
Edited by: Keshu Thekkillam on Oct 26, 2009 5:10 PM -
Table for WBS status change with date
Hi,
Please assist me with a table name which should have WBS status with date on which statis was changed.
Thanks,
Manish.Hi
You can use program (SE38) RBSVCDOC to track these changes. Else go manually in CJ20N to track these status changes.
Use JCDS and JEST table for any other reporting on it.
*Kindly mark your thread once your query is resolved.*
Regards
Saurabh -
Table for IO status in DBM order
Hi All,
I need to come out with the IO tracking report for IO in DBM order (status is open for IO header or IO split). Appreciate if anyone could assist me to provide the table name for IO status.
ThanksHi
Please check the tables...
VBUK - for Header status
VBUP - Item status.
Thanks,
Ravi -
Hi all,
Can you tell what table is for <b>staffing status</b>. I can c this in transaction <b>PPOME</b> but couldnt find table for this.
Just I am trying to find status of possition. is there any function module for this?
Thanks
ShivaHi
Every staff Position (employee) status is stored in Infotype <b>PA0000
in STAT2 field only.</b>
Reward points for useful Answers
Regards
Anji -
Table for position status in sales order?
Hi veryone,
I would be veru grateful if someone could help me to find a table in which I can find the status of a certain position in a sales order.
Thanks in advance and best regards.
BenHi
Please check the tables...
VBUK - for Header status
VBUP - Item status.
Thanks,
Ravi
Maybe you are looking for
-
JSPs and Servlets do not work on Apache HTTP- Procesor Intel P4
Computer description: Intel Pentium 4 processor with 20GB HD drive, 1GB RAM, Windows 2000Pro, Service pack II Before installation: We created a temporary directory on our Intel Pentium. 4 processor server (e.g. \TEMP). Copied the contents of the Orac
-
Replace not latin characters from file name.
Dear friends, I tried a lot but even after reading the documentation about all the available CF functions I could not find a way to accomplish this: As you already know from my previous post I'm trying to finish an application which manages multiple
-
Error in VL10I Standard Program
Hi All, I was asked to debug standard program VL10i where not all deliveries are getting created when done together. some of them misses out.When I run then individually it works. Sometimes if you run in small batches it works..sometimes it
-
Hi, Does the ACE 4710 supports ssl-offloading of FTPS Application ? If so please provide me with the configurations.
-
How much do I need to know in order to create this
I've thinking about this thing for a very long time - a thing that's really bugging me: the swatches panel's "list types". Currently you can list your swatches as small or large thumbnails - or in a small or large list. Neither is really "satisfactor