Table for the structure RIHEQUI_LIST
Hello,
I want the table name for the structure RIHEQUI_LIST.I searched but i didn't get the table name. Please help me on this.
Regards,
Rajesh
Hi , Please find some of the table names below , and you are very specific what you want from this structure.
EQUI Equipment master data
EGERR Device data: Info record for point of delivery - historical
EGERS IS-U Device Master Data
EGTUR Periodic Replacement List
EIKE Index for Removed Device
EQBS Serial Number Stock Segment
EQKT Equipment Short Texts
EQST Equipment to BOM Link
EQUZ Equipment time segment
A270 Euqipment/Document Type
A272 Equipment/Standard Dummy Customer/Document Type
Similar Messages
-
Need Table name for the structure
hello guru's,
I am using the tcode AW01N , In that i need to fetch a field that field contanis structure named
AW01_DEP_PAR. My field name is RSTNDJ,RSTNDP . can u tell me from which table its stored .
AW01_DEP_PAR-RSTNDJ, AW01_DEP_PAR-RSTNDP.
Regards
vinoth.vVinoth,
We can find it using ST05.
Activate the trace in ST05
Run the transaction in which you want to find the table for the corresponding structure.
After completing the entire transaction Process go to ST05 decactivate the trace and display the trace.
Now in the menu bar go to Trace List>>Summarise trace by tables or press Ctrl+F8.This you will get to know all the tables that are getting updated when a particular transaction is Executed.If you explore it then you will be able to find out the corresponding table for a structure.Hope this may give you some lead.
K.Kiran. -
Table name for the structure MEPO1211
Hi Friends,
I want to find out the the Purchase Orders created with USD currency. This currency indicator is not available in the table EKPO. On checking the PO, the currency field is in the strucure MEPO1211.
Kindly let me know the table name where the PO with currency is stored or the table name for the structure MEPO1211.
Thanks in advance.
Regards,
Mark KHello Mark
If the fields belong to the PO header then EKKO is the table you should look for.
In case of item related data the table is EKPO.
In any case structure MEPO1211 just belongs to screen 1211 in the PO application.
Further Reading:
[Purchase order item - cl_po_header_handle_mm|https://wiki.sdn.sap.com/wiki/display/ABAP/Purchaseorderitem-cl_po_header_handle_mm]
Regards
Uwe -
How to trace the database table for a structure
hi
am trying to find the database table for a structure unfortunately am failing to use the sql tracer any one know howelse i can do that the structure name is 'busbankcheck' and 'bus000flds'.
thanx in advanceHi florence,
1) U can go to tcode sldb and give ur structure name or if u can find which logical database it is from u can get the tables of the structure....
Suppose it is of HR it may be like pnp logical database and then to sldb and give pnp and u can get all the table of that....
2)If u know which fields u want from the stucture....then go to table DD03L and give ur fields name and it iwll bring where all tables this field is avaialble and u can find them......
3) the st05 sql trace can help u.....
I hope any one of the three will definetely help uuu
Regards
vamsi
Edited by: vamsi talluri on Jan 22, 2009 1:24 PM -
Report or table for the changed sales orders
Hi Friends,
Does anyone know of the standard report with which we can track all the sales orders where the changes have been made in particular date range?
If not standard report then atleast the table or the structure where the value is stored.
I know that we can track the orders one by one but I am looking for a list of orders.
Thanks in advance.
Regards
KaranHi,
Try CDHDR for header and CDPOS for items.
The only trick here is finding the object.
Reward points if useful
Regards,
Amrish Purohit -
How to find out name of table for a structure.
hello all,
I want to find out name of table for a structure ADDR1_DATA. can anybody pls tell me how to find out it?
Thanks,
AshuHi Ashu,
You write the structure name in se11
after selecting the database table radio button
click on the where used list button in the application tool bar.
You will find the table name if it is used else where.
Check out the website at:
http://sap-idoc2edi-consulting.com/
Read the blog at:
http://blogs.ittoolbox.com/sap/ehadzipetros
Regards,
Jagadish -
Retrival of Control Key of Operation & Table underneeth the structure
Hi Experts,
Right now i'm working on PP and PM related stuff, I'm in the middle of the project and stucked down at a point in how to retrive the control key of operation that triggered the update in production order: opoerational view. (CO03).
Also i have a small question on how to findout the underlying table for a particular field(any field in a screen), when done F1 on that particular field the technical details says as table name but it is actuallya structure. So how should i find the table underneeth the structure where the particular data is being stored.
Or how should i retrieve the data if i couldn't figure out the table, is there some way that i can retrie the data using the structure.
Thanks for your contribution.
Regards
RichHi Rich,
This is a common problem.One of the best and easy way is use the transaction ST05 for trace.lemme explain in detail.
1.go to ST05 transaction
2.switch trace on
3.take your screen where the field resides
4.enter value in this field and other required field
5.then save the screen
6.go to ST05.
7.stop the trace
8.click on display trace
9.you will get a detailed log what all happend
10.search the log with 'update' or 'insert' word or search with the field.
11.you can find some table name.
12.check that table contains the record which you saved.
Sure this will help
Another Way
1.go to transaction se84.
2.take ABAP dictionary
3.go to Fields
4.Give the field name in table field /structure field
if you are lucky you will get in this
Regards
Shibu Kurian -
Inconsistency in the Dictionary for the structure "MC02M_0ITM".
Hi Expert,
we are applying ehp3 for ERP 6.0. I am getting the below abap dump DDIC_TYPE_INCONSISTENCY.
Runtime Errors DDIC_TYPE_INCONSISTENCY
Date and Time 29.08.2011 10:12:27
Short text
Inconsistency in the Dictionary for the structure "MC02M_0ITM".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLMCEX" program had to be terminated because the
ABAP processor detected an internal system error.
Error analysis
There is an internal system error.
eliminated with ABAP/4.
How to correct the error
The internal system error cannot be fixed by ABAP means only.
You may be able to find a solution in the SAP note system. If you have
access to the SAP note system, try searching for the following terms:
"DDIC_TYPE_INCONSISTENCY" " "
"SAPLMCEX" or "LMCEXTOP"
I can see there is error on Table MC02M_0ITM:
Table MC02M_0ITM could not be activated (E- Field ZZUNDTSORT in table MC02M_0ITM is specified twice. Please check )
when I run the program RSDDCHECK in your system, for check the structure "MC02M_0ITM".
There is som error.
Any Idea how can I solve this kind of error. Is it some repport for help this?
RegardsHi Srikishan,
Thanks for reply.
There is just one field ZZUNDTSORT on talbe.
When I try to check the table I get this log:
Check table/structure MC02M_0ITM
Check table MC02M_0ITM (REZ/29.08.11/11:14)
Enhancement category 3 possible, but include or subty. not yet classified
Field ZZAFHENTFORM in table MC02M_0ITM is specified twice. Please check
Field ZZAFHKVANTUM in table MC02M_0ITM is specified twice. Please check
Field ZZAFHTERMFRA in table MC02M_0ITM is specified twice. Please check
Field ZZAFHTERMTIL in table MC02M_0ITM is specified twice. Please check
Field ZZAFREGNDATO in table MC02M_0ITM is specified twice. Please check
Field ZZAFREGNKVAMTUM in table MC02M_0ITM is specified twice. Please check
Field ZZAFREGNMEINS in table MC02M_0ITM is specified twice. Please check
Field ZZALTMATNR in table MC02M_0ITM is specified twice. Please check
Field ZZALTMPRIS in table MC02M_0ITM is specified twice. Please check
Field ZZANSOEGNR in table MC02M_0ITM is specified twice. Please check
Field ZZANTHA in table MC02M_0ITM is specified twice. Please check
Field ZZBK_DUMMY1 in table MC02M_0ITM is specified twice. Please check
Field ZZBK_DUMMY2 in table MC02M_0ITM is specified twice. Please check
Field ZZBK_GRKERN in table MC02M_0ITM is specified twice. Please check
Field ZZBK_KNKERN in table MC02M_0ITM is specified twice. Please check
Field ZZBK_MELDR in table MC02M_0ITM is specified twice. Please check
Field ZZBK_OLIEIND in table MC02M_0ITM is specified twice. Please check
Field ZZBK_RENS in table MC02M_0ITM is specified twice. Please check
Field ZZBK_RENTFRO in table MC02M_0ITM is specified twice. Please check
Field ZZBK_RENTIL in table MC02M_0ITM is specified twice. Please check
Field ZZBK_TOR in table MC02M_0ITM is specified twice. Please check
Field ZZBK_TORTIL in table MC02M_0ITM is specified twice. Please check
Field ZZBPROT in table MC02M_0ITM is specified twice. Please check
Field ZZBUREN in table MC02M_0ITM is specified twice. Please check
Field ZZBVAND in table MC02M_0ITM is specified twice. Please check
Field ZZFORBELNR in table MC02M_0ITM is specified twice. Please check
Field ZZFORFALDSDATO in table MC02M_0ITM is specified twice. Please check
Field ZZFORVUDB in table MC02M_0ITM is specified twice. Please check
Field ZZGJAHR in table MC02M_0ITM is specified twice. Please check
Field ZZKONCEPTNR in table MC02M_0ITM is specified twice. Please check
Field ZZLAESSELV in table MC02M_0ITM is specified twice. Please check
Field ZZLAGERLEJDATO in table MC02M_0ITM is specified twice. Please check
Field ZZLAGERLEJSATS in table MC02M_0ITM is specified twice. Please check
Field ZZLAGERSATSDATO in table MC02M_0ITM is specified twice. Please check
Field ZZLAGERSATSDATO2 in table MC02M_0ITM is specified twice. Please check
Field ZZLAGERSATSDATO3 in table MC02M_0ITM is specified twice. Please check
Regards -
Find table for a structure field
Hi,
I need to find table for field Q0743-OFFR1. I tried using tcode SE15, but was not able to find any table where the field is used.
Is there any other method of finding a table for a structure field.
Any pointers in this regard would be helpful.
Thanks,
SaherHi,
when u open the structure , u will find the tab " Component " in that you
will find "Data Element" column which hold the data element of the structure
component , now double click on the respective "Data Element " and that will
open up the Data Element Page in which u will find a "Where Used List" icon
, click on that, this will now display you the list, select the TABLE LIST
Check box and execute, which will subsequently display you all the the table
names which has "specified" data element's component as field
Hope this will Help you.
Regards,
Kiran -
hello everyone,
Can anyone please let me know what is the Database table for KOMK structure.
I want to get field STCEG(Vat Reg number ) from KOMK structure.
AS i cannot use the select statement on KOMK structure i need Database table.
thanks in advence,
regards,
cheruku.Hi Ashish,
I have one doubt
I want to transfer STCEG field from TKOMK to VBAP table Field(zz_stceg).
so in user exit "userexit_move_field_to_vbap" i coded like below.
VBAP-zz_stceg = TKOMK-stceg.
is this ok or do i need to code anything Extra.
Thanks in advance,
regards,
cheruku. -
Problem while filling the Setup Table for the DS 2LIS_02_SCL.
Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM -
How to create internal table for a structure in BSP
hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
include type zuvendstr.
data:end of itab_1.
data wa_str like line of itab_1.
loop at itab_1 into wa_str. %>
<tr>
<td><%=wa_str-name%> </td>
<%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPSHi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy -
R/3 tables for the fields of 0fi_gl_40
How to find the r/3 tables for the fields of the datasource 0FI_GL_40.For example this datasource has ANLN1(Asset),ANLN2(Asset Subnumber) and AUFNR(Order)
fields.Is there any tcode or table that gives the r/3 tables for the the fields of the above datasource?Sometimes the help really does provide the information
http://help.sap.com/saphelp_nw70/helpdata/EN/88/3c36861f874739a916df63ab6d7ca0/content.htm -
Tables for the following fields
what are the tables for the fields cartonization,intro month,supply end month,delete month and non-colloboration.All are from MM.
hI,
Go to table DD03T.
See the Contents of the Table(CtrlShiftF10)
In DDTEXT give Your Field Description
Like totalAmount*
Then Press F8.
You will get all the fields related to it.
Regards
Sandipan -
Inconsistency in the Dictionary for the structure "VXO2APPL"
Hi gurus,
I started with SP stack upgrade to 10(Install SAP EHP1 for SAP NetWeaver 7.0 Stack 10 with Kernel 7.20).
--First i did kernel upgrade from 701 patch 111 to 720 patch 105 which was successfull.
--Now when i tried to upgrade the stack it gives me below error:
Runtime Errors DDIC_TYPE_INCONSISTENCY
Date and Time 22.02.2012 14:16:39
Short text
Inconsistency in the Dictionary for the structure "VXO2APPL".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLSDOC" program had to be terminated because the
ABAP processor detected an internal system error.
Error analysis
There is an internal system error.
eliminated with ABAP/4.
Trigger Location of Runtime Error
Program SAPLSDOC
Include LSVRXPIN
Row 1.096
**************************************************************************8
I am able to login to the system in 000 client but when i give any tcode i get this error....(i am only able to fire st22 and no other t code)
Anyone who can help or has got the same problem earlier?
Thanks
SiddharthHi Siddharth,
Is Kernel upgrade to 720 really required for Support package stack upgrade ?
because information clearly states "Error in the SAP kernel" rather i would suggest to upgrade your SAP system kernel to latest of 701 patch level 150
Once you revert kernel to 701 , then try applying Support packages via client 000.
Let us know results
Regards,
Maybe you are looking for
-
E61i no longer connects successfully
Hi, I'm having a very frustrating problem with my E61i, which has worked perfectly with Bluetooth File Exchange, Nokia Multimedia transfer etc., but now fails to connect. It seems something is corrupted on the phone such that this no longer works. Re
-
Issue with report S_ALR_87011964
Hi Gurus I have executed teh report S_ALR_87011964 but some assets not shown assets such as 25698 (class 4000). Compare this to asset 25650 (class 2000) which is also rs0 value but this asset is shown in the report any idea why it is not shown? ki
-
I have bought Adobe Photoshop ver. 12 and would like to install it. I already have Photoshop Ver. 10 on my laptop. Do I need to un-install Ver. 10 first or can I install ver. 12 without removing ver. 10? THanks
-
Okay, so my initial post was on my gmail issues (hope you can help with that issue!). Now I thought to just add my hotmail account in the meantime. Guess what?! Error message "your device had a problem connecting to the server"..... is my BB malfunct
-
Issue with Oracle Application Adapter (11g) for SAP
Hi, I need to call a WSDL file that is generated through Oracle Application Adapter Application Explorer from a BPEL Composite in SOA 11g. The wsdl files are stored under the path $SOA_HOME/soa/thirdparty/ApplicationAdapters/wsdls by default. I'm not