Table for user's default data
HI all,
Is there a table to find out the 'date format' of the users in BW/ BI?
Regards,
Adarsh
Adarsha
Go to TCODE SE16, enter table USR01, for the "User" field select "Multiple Selection" ( arrow sign).
In the "single vals" tab put user name one bye one. Click on execute-----again execute.
Now you can see one field called "Data Format" and values can be 1, 2, 3, 4 , 5......A.B.
Meaning of these digits are given below..
1 DD.MM.YYYY
2 MM/DD/YYYY
3 MM-DD-YYYY
4 YYYY.MM.DD
5 YYYY/MM/DD
6 YYYY-MM-DD
You can get the whole list by selecting a particular user and then press F1 on the digit in the "date format"
Hope this helps...
Similar Messages
-
Hi All,
Does anyone know the Table for User Parameter IDs?
Thanks in AdvanceHi Duke,
USR01 User master record (runtime data)
USR02 Logon data
USR03 User address data
USR04 User master authorizations
USR05 User Master Parameter ID
Regards,
Ashok -
Table for user status field in CJ20n transaction project defination
HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1) TYPE c VALUE 'X',
gc_no(1) TYPE c VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
objnr LIKE jest-objnr,
stat LIKE jest-stat,
END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
objnr LIKE jsto-objnr,
stsma LIKE jsto-stsma,
END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0, "Combination of JEST & JSTO
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE jest-stat,
END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0, "Uer status for all wbs
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0, "User Status text - TJ30T
stsma LIKE tj30t-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
objnr FROM prps
INTO l_objnr
WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
objnr
stat
FROM jest INTO TABLE lit_jest
WHERE objnr = l_objnr AND
inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
objnr
stsma FROM jsto
INTO TABLE lit_jsto
WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
READ TABLE lit_jsto WITH KEY
objnr = l_objnr.
IF sy-subrc = 0.
lit_status-objnr = lit_jest-objnr.
lit_status-stsma = lit_jsto-stsma.
lit_status-stat = lit_jest-stat.
APPEND lit_status.
ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
stsma
estat
txt04 FROM tj30t
INTO TABLE lit_usrtxt
FOR ALL ENTRIES IN lit_status
WHERE stsma = lit_status-stsma AND
estat = lit_status-stat AND
spras = sy-langu.
Let me know if you have any question.
Regards,
RS -
hi
Please tell anybody what is the table for User Status Profile in Sales Orders? where it will stores?
Regards
RajendraHi,
Use table JEST
Here you will have to enter the object number as an input field
Get object number from table VBAK or VBAP based on whether the status profile is attached at sales order header or at sales order item.
Status which is active will start with letter E and the status inactive flag will be blank.
Regards
Ravi -
Hello Experts,
I am new for SAP.I have a problem i need that standard table which store user working history. Actually i was using a table in my one application but someone by mistake has been deleted that table and i don't know who do that. Now i want to know that when and who deleted that table.Or tell me the procedure how i can know that.
Thanks in advance.
VishuHi,
U can see tables:
USR01 User master record (runtime data)
USR02 Logon data
USR03 User address data
USR05 User Master Parameter ID
USR12 User master authorization values
cheers,
Simha.
<b>Reward if it is needful..</b> -
How to list all available tables for user "karl"
How can I list all available tables (=table names) for user "karl"?
Nice to have would be if (after each table name in another column of each row) the number of data rows in this table can be listed similar to:
TABLE NUM ROWS
TESTA 12
TESTB 3455
ANOTHERTAB 234
How can I do this?from Laurent Schneider
http://laurentschneider.com/wordpress/2007/04/how-do-i-store-the-counts-of-all-tables.html
SQL> select
2 table_name,
3 to_number(
4 extractvalue(
5 xmltype(
6 dbms_xmlgen.getxml('select count(*) c from '||table_name))
7 ,'/ROWSET/ROW/C')) count
8 from user_tables;
TABLE_NAME COUNT
DEPT 4
EMP 14
BONUS 0
SALGRADE 5 -
Table for Stock on Specific Date in the Past.
Hi ..,
Please give me the Name of the Table to find the stock on Specific Date for a given material in the Past. like the T.code we use MB5B.
regards.Hi
MB5B uses a list of tables & logic to get the Stock for a particular posting date.
if you want the stock run this report in your Z- report & export the Values to your Z-report & use them accordingly.
Hope this helps
Thanks & Regards
Kishore -
Tables for sales & purchase order data relating to delivery
hi all,
i am writing a report to download all the delivery data after the delivery is created.i have to download the sales order data & purchase order data relating to this delivery also.
i am using likp & lips table for delivery.which tables i
should use to get the sales order data & PO data for the same delivery (likp-vbeln). i.e i need the sales & purchase order related tables which has link with delivery tables like likp & lips etc.
plz advice me. it is very urgent.
any idea is highly appreaciated.
Regards
pabitrain Addition to NM ,
in case of STO there is no Sales Order , Process will be like this
PO-->Delivery->PGI--->Billing then u have to
link
*getting the History data of the PO
select ebeln
ebelp
belnr
menge
from ekbe
into corresponding fields of table w_ekbe
where ebeln eq w_lips-vgbel
and ebelp eq w_lips-vgpos
and bewtp eq 'L'.
Regards
Prabhu -
To fix the length of a textfield for user to enter date
hi,
i need to display a textfield for user to enter the date in the format MM/DD/YY.With the slash in between present and fixed and the possibility of entering only 2 digit figures for the month,day n' year.I am using JTextField .how can i acheive that pls help.You must design you own document where you will manage the text that will be entered/displayed in your textfield
here's a sample of the code I use to do this:
import javax.swing.JTextField;
import java.io.*;
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
import java.awt.event.*;
public class MaskedTextField extends JTextField
private String initStr;
public MaskedTextField (String mask, String initStr)
super();
setDocument(new MaskedDocument(initStr, mask, this));
setText(initStr);
this.initStr = initStr;
this.addMouseListener(new java.awt.event.MouseAdapter()
public void mouseClicked(MouseEvent m)
this_mouseClicked(m);
private void this_mouseClicked(MouseEvent m)
if (getText().equals(initStr)) setCaretPosition(0);
class MaskedDocument extends PlainDocument
String mask;
String initStr;
JTextField tf;
public MaskedDocument(String initStr, String mask,
MaskedTextField container)
this.mask = mask;
this.initStr = initStr;
tf = container;
void replace(int offset, char ch, AttributeSet a)
throws BadLocationException
super.remove(offset,1);
if (capitalised) super.insertString(offset,
String.valueOf(ch).toUpperCase(),a);
else super.insertString(offset, "" + ch, a);
public void remove(int offs, int len) throws BadLocationException
if (len==0)
return;
// Remove current contents
super.remove(offs, len);
// Replace the removed part by init string
super.insertString(offs,initStr.substring(offs,offs+len),
getAttributeContext().getEmptySet());
tf.setCaretPosition(offs);
public void insertString(int offset, String str, AttributeSet a)
throws BadLocationException
if ((offset==0) && str.equals(initStr))
// Initialisation of text field
super.insertString(offset,str,a);
return;
if (str.length()==0)
super.insertString(offset,str,a);
return;
for (int i=0;i<str.length();i++)
while ((offset+i) < mask.length())
if (mask.charAt(offset+i)=='-')
// Skip fixed parts
offset++;
else
// Check if character is allowed according to mask
if (str.charAt(i) != this.initStr.charAt(i))
switch (mask.charAt(offset+i))
case 'D': // Only digitis allowed
if (!Character.isDigit(str.charAt(i)))
return;
break;
case 'C': // Only alphabetic characters allowed
if (!Character.isLetter(str.charAt(i)))
return;
break;
case 'A': // Only letters or digits characters allowed
if (!Character.isLetterOrDigit(str.charAt(i)))
return;
break;
replace(offset+i, str.charAt(i),a);
break;
else
i++;
offset--;
// Skip over "fixed" characters
offset += str.length();
while ((offset<mask.length()) && (mask.charAt(offset)=='-'))
offset++;
if (offset<mask.length())
tf.setCaretPosition(offset);
if (offset == mask.length()) tf.setCaretPosition(offset);
Enjoy
Bernie -
Querying CMS tables for users' security, history & favorites
Hello,
We are running BOBJ over a BW environment, and we've been asked to help design a Webdynpro interface that reads a user's security credentials in both BW and BOBJ servers and pulls in all reports, Bex or BOBJ, that they have access to.
To do this, we would need to query the CMS tables for:
All reports a user is authorized to view
Groups a user is associated with
User's History
User's Favorites
Does anyone have suggestions? I've researched Query Builder, but I'm not sure if it can help us, as it accesses three virtual tables instead of the physical tables in the CMS. The option I am guessing we will need to use is SDK.
I'm fairly new to both BW and BOBJ, so any advice is appreciated.
Thanks
ScottHello Scott,
Did you check the possibility of using Audit universe and reports? Please check below link for some useful sample files.
http://scn.sap.com/docs/DOC-53904
Regards,
Nikhil Joy -
Tables for User Details & User Tcode Details.
Hi all,
I'm need of the tables as per the criteria given below.
1. User List
2. Tcodes associated with the User.
Also let me know if there is any Standard Report that returns list of users with tcodes associated with them.
Can anyone help me out?
Thank You.Hi Shrilath,
You can use tcode SUIM - (User info system- most user related report can be found here).
SAP has provided you with the SUIM tool for these kind of generic requirement, so avoid using this than creating your own custom program(no reinvention of the WHEEL).
As about you requirement, execute tcode SUIM
Execute the selection "Executable for User" and Enter user name
You will be listed with all the tcode the user can execute in the system.
As about your initial requirement to get all users in the system.
You can execute the User section (drill down on first screenshot), and execute without any filter values on address or user name. You should get all the users in the system
Thanks & Regards,
Tashi -
Hello All,
I have been trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
Below are the steps i have followed,
1.Deleted the setup tables using tcode-LBWG- Application-11
2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
3.Checked the data in RSA3-No data found.
4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
Do i need clear all the queues for SD-Billings,Orders e.t.c since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
Could you please suggest any other option to fillup the setup tables.
Regards,
SivaDid you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
Regards,
AL -
Dear Experts,
I want the table to get the Telephone phone number of all users to send an SMS.
Actuall i am getting the telephone number of a user from "BAPI_USER_GET_DETAIL".
But i want all user phone numbers at a time.
For that i need table to get all the phone numbers.
Please tell me if there is any table.
Regards,
Eswar.Hi Eswar,
I think the table you're looking for is ADR2, and stores telephone numbers from users and business partners.
For consulting the table, you'll need an address number.
For users addresses numbers, please consult table USR21
For business partners addresses numbers, please consult table BUT020
Kind regads,
Garcia -
once we add additional functionality to predefined tranction(enchancenement) where it will be saved?(is there any table for store that data . plz help me
once we add additional functionality to predefined tranction(enchancenement) where it will be saved?(is there any table for store that data . plz help me
-
Table for qualitative and quantitative data in qa33
Hi which table store the qualitative data and quantitative data of SAP QM , t-code qa33, in the t-code qe03 where display the records in qualtitative, I want the specification of qualitative data so please tell me which table store the qualitative specification data which is shown in qe033??
Solved
Maybe you are looking for
-
Fault message in synchronous scenario
I defined an integreationprocess with synchronous send step and an exception branch. And I specified an exception for a fault message which I defined in the synchronous interface. My problem is, that the exception is not triggered by application erro
-
Hi! Can anybody tell me if there any difference in configuring SSO for APEX 4.1 depending on which HTTP Server it is using (Embedded PL/SQL Gateway or Oracle HTTP Server). And also, if I have several applications in the same domain and I have created
-
Special Procurement using External Procurement & Subcontracting
Hello everyone! We currently have a material that is set up as "F" Procurement Type (External) with Special Procurement Type "30" (Subcontracting). We have active scheduling agreements for subcontracting procurement of this material. User also need
-
Business Process integration Carreer in coming future
Hi all, Recently i came across BPI, i googled it but i got very limited understanding about this like , which talks about major core modules knowlege, SD,MM,FICO,PP etc, but don't know the future of this course. So kindly let me know how is the futur
-
Java, JSTL and Tomcat Auto Installation( Windows)
Anyone know of a program that installs the Java SDK, Tomca and JSTL all in one go? I'm fed up of messing about with all this manual configuration to no avail. Cheers guys. Jamie