Table for userid and person name

Hi,
I want a table in which I can find two fields user id and person name.
can any body plz help me in this??
Thanks,
Satish.

hi
use the following
USR01 User master record (runtime data)
USR02 Logon Data (Kernel-Side Use)
USR03 User address data
USR04 User master authorizations
USR05 User Master Parameter ID
USR06 Additional Data per User
and USR21 and adrp!!
plz reward points if it helped and close the thread!!
Regards,
Gunjan

Similar Messages

How to find R/3 table for FI and PS Datasources

Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
Shanthi

Hi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK

Table for preceding and Susequent documents .

hi experts,
Please tell me the name of table which contains all preceding and subsequent documents of purchase order or sales order.
Answer will be rewarded by Max points.
regards,
Sandeep

Hi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka

Table for Customer and vendor open balance on a key date

Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.

Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu

SSO Configuration not working - Still asking for Userid and password

Hi Guys,
I have configured Portal to use with backend server. Configured WAS & ITS and created System Alias.
For Testing SSO I did following steps on portal:
System Administration > Support > SAP Appliction > SAP Transaction
Selected system Alias and tcode se12. Selected SAPGUI for HTML. Pressed Go.
Instead of SE12 screen, I get Logon Screen asking for USERID and password.
I should be getting SE12 screen directly without entering USERID and PASSWORD.
I tested with Transaction iView (SE12) and getting the same logon screen. After entering userid/password it displays SAP Easy Access menu instead of displaying SE12
Please help.
Thanks a lot.
mini

Hi Sandeep.
Thanks for your reply. Here are the answers to your questions:
1. Is the username same in the portal and the backend that you are trying to connect, ensure that there is the same username that exists in the system you want to connect to. YES
2. The ticket is imported properly- check the ACL and Certificate list in Tcode STRUSTSSO2.
Ticket is valid from 01 Jan 2009 to 14 Mar 2012.
3. Check for the parameters in place login_accept_ticket = 1 and login_create_ticket = 2 and icm_hostname_full is set to FQDN.
In RZ10 it has 3 parameters:
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 2
icm/host_name_full = sapecc6.tri.com
4. What is the result when you test the system connection?
WAS & ITS Connections are successful.
Connection test for Connectors is giving following results:
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
My Connectors Details:
Application Host : sapecc6
Gateway Host : sapecc6.tri.com
Gateway Host : 3301
SAP Client : 800
SAP Client : EC7
SAP System Number : 01
Server Port: 3201
System Type: SAP_R3
I am using same userid for Portal and backend.
5. Are the 2 systems that you want to configure SSO in the same domain?
I am trying to connect R3 to Portal.
Please give me directions to fix the problem.

Need table for customer and vendor carry forward balance

Hi,
I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
Thanks in advance.
Regards,
Swati

Hi Gurus
The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
and my 2nd query is how to get these opening balance in Z report, at Header Level.
Thanks and Regards
Dnyanesh

Source tables for forms and tabular forms must have a primary key.

Why does HTML DB 2.0 return the message
"Source tables for forms and tabular forms must have a primary key."
when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
bw - Christian

Christian,
In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
Regards,
Marc

Taking long time filling the setup tables for sales and shipment

Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .

Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth

Table for BW formula technical name

Hi experts,
In my transport i have entries tagged as BW Formula, most likely the generated program for any existing formulas in our update rules. Is there a table were I can find what update rule this formula belongs to, what is the source and target infoprovider? somthing similar to RSUPDINFO...
mark

Hi,
the tables for URules and their objects are:
RSUPDDAT
RSUPDINFO (here you can see the ISource and target)
RSUPDKEY
RSUPDROUT
Formulas are maitained in the follwing tbls:
RSAFORM
RSAFORMMAP
RSAFORMT
RSFOBUEV000
RSFOBUEV001
Routines:
RSAABAP
RSAABAPINV
RSARFIELDS
RSAROUT
RSAROUTT
hope this helps,
Olivier.

Table for terms and conditions

what is table for terms and conditiions??
regards
jyoti

Hi Jyoti,
If u are looking for the payment terms then the table T052 and T052U.
Regards
Kiran Sure

Base tables for aggragates and Multiproviders

Is RSDICMULTIIOBJ the base table for Multiproviders?
What is the base table for Aggragates and units?

Multiproviders
RSDCUBEMULTI
RSDICMULTIIOBJ
Aggregates
RSDDAGGREF
RSDDAGGRT
RSDDCVERREPAGGR
RSDDAGGR
RSDDAGGRCOMP
RSDDAGGRDIR
RSDDAGGRDIR_M

How to fill up set up tables for 2lis_03_UM and BF?

Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanks

Hi,
I think you can follow the same procedure. After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM

Table for shipping and billing documents ?

hi experts,
how can we come to know that what shipping (VL01n), and billing(VF01) documents has been created for any particular date.
actually the problem is that i want to modify some documents that i have created a few days ago, plz help me?
thanks in advance.

Hi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka

Table for Material and Inspecton lot together?

Dear SAPIENTS,
Please tell me table for Material and Inspecton lot together.
Regards,
Kaushal Rai

Hi Kaushal,
- Run trx QA08.
- Select the option Activate inspection type. (This tab should be green)
- Enter material type at least to not have a junk of data at a single execution. You can set other fields as per your requirement.
- Check the Box "Assign Inspection type", Don't check/activate any of the rest three
- Enter the inspection type, here is an limitation you can know the status inspection type by type.
- Execute.
- The system will give you the list of the materials that are note activated for the inspection type you feed in the selection screen.
Hope it satisfy you. at the other way me and you both will search for the better option.
Regards,
Shyamal

Webdynpro for ABAP - Popup apearing for userid and pwd

Hi Experts,
We have implemented ESS and gone live. Now we have created one custom application in webdynpro for ABAP and attached with portal.
Initially there was a problem, the application was not getting executed because of system configuration, then I have configured the host name, port number correctly. Then the iView is getting loaded in the portal.
The problem is, when I am trying to access the iView, the popup apearing for the user id and password. This is happening only the webdynpro abap application, this is not happening for all sap standard iViews.
Could anyone help me with this issue?
Thanks
Jay

Hi Jayanthi,
as you had mentioned this is not happening for sap standard iViews(do you mean simple transaction iViews for which you have used a system alias, which was the same you had used for ABAP web dynpro iview)?
Of courese ESS iViews works with their own JCOs which is no way helpful or connected with wd ABAP.
So I believe if your SAP id and Portal id are different(or if they are same but SAP Logon ticket is not configured properly) then only it woudl ask for the authentication again- for Wd ABAP to work fine, only the connector property and WAS to tbe configured in the system object(aka system alias) used for ABAP iview. Now once you enter the login credentials, it is working fine right, then could you please test the user mapping under the user you are logged in, select the alias that you had used while creating the abap wd iView and provide userid/password here, then run the wd ABAP application, it definitely would work.
N.B: if you had provided the credentials once, then it woud be stored in the browser cache, so if you perform the user mapping in user admin, log off from portal, close all your browser windows, then clear cache,(cookies etc). then login to portal, run the wdABAP application, I am sure this would work(it worked for me!!!).
Thanks,
Jakes.

Table for userid and person name

Similar Messages

Maybe you are looking for