Table for view and its description
Hi,
Is there any table which can have the view and its description in R/3?
These views are primarily used in Generic extractor Definition!
I am preparing a list of the views used in Gneric extraction and for that i need the description of the view in question!
Raj
Hi,
I have nearly 1200 Views .
It is just not possible to enter each entry of the view and to know the description manually.
I know that we can find the description in SE11. but if there is a table which can have the viewid along with the description my job is lot easiler.
Any ideas?
Raj
Similar Messages
-
TABLE FOR DIVISION AND ITS DESCRIPTION
Dear Mates,
My client wants to add a Division and its Description to the Z report -Daily Collection Report from Customers.
Can anybody help out for table name and its fields for Division and Description
Thanks in anticipation
SubbuHi,
I guess your question is about divisions within a Sales Organization. The related tables are listed below:
TSPAT - organizational unit: Sales Divisions (Text)
TVTA - Organizational Unit: Sales Area(s)
TVKOS -Organizational Unit: Divisions per Sales Organization
Hope you find the information relevant and useful. If so, please close the message.
Muraleedharan.R -
Table for queries and their descriptions!
Hi,
Can anybody disclose me table name for queries and their descriptions?
RajHI,
Check the table RSZCOMPDIR.
Also RSZELTTXT and RSRREPDIR
Hope this helps... -
Table for Component and Component Description in CS03
Hi,
I want to know the table associated with CS03 Transaction.I mean from which table we can get component and component description. And Is there any way that we can pull all the characterstic Values for that particular component.
Thanks in advanceHi
see the tables
MAST
STKO and
STPO
all related to BOM
Bill of materials
to pull all characteristic values
use tables CAWN and AUSP or
Use the following BAPI's:
BAPI_OBJCL_GETDETAIL
or use the fun module:
CLAF_CLASSIFICATION_OF_OBJECTS.
Regards
ANJI
Message was edited by:
Anji Reddy Vangala -
Table for queries and their descriptions under 4.6C
Hello experts,
does anyone know the above mentioned tables. Unfortunately V_COMPDIR_COMPIC and
-RSZCOMPDIR
-RSZCOMPIC
-RSZELTTXT
-RSZELTDIR
don´t seem to work under 4.6C.
Thanks in advance.
Regards,
F.H.HI,
Check the table RSZCOMPDIR.
Also RSZELTTXT and RSRREPDIR
Hope this helps... -
Table for TDS sections and its description
Hi,
Is there any table where both TDS section and its description is getting stored? If this is possible can we relate the same to Vendor through any link?
Thanks & Regards,
TapanHI
J_1ITDSSEC is the table for TDS section and description.
TDS sections will be assigned to tax codes, so you can link through tax codes whatever is assigned to a vendor.
Relation will be -- Vendor-- Taxcode--tDS section.
Cheers
Mukta -
Tables for Defect type and its description while defect recording for a MIC
Dear Experts,
Kindly suggest the tables name in system by which we can get Defect type and its description that we have used while performing defect recording for a MIC in system at the time of result reording for an inspection lot.
Thanks in advance for your inputs ...
Best regards ,
Nitishjhii,
Check
QPAC - Inspection catalog codes for selected sets
QPAM - Inspection catalog selected sets
QPMK-CODEQUAL- Defect code grp for rejection at MIC level
Link above table field name with QAVE for UD code & QAMR for Results recording
Edited by: Lokesh K on Sep 29, 2010 10:43 AM
Edited by: Lokesh K on Sep 29, 2010 10:45 AM -
Which table if for BADI and its implementation
Which table if for BADI and its implementation
I want to know which implementations have already been created and actived for one BADI.Hi
check the tables for BADI
SXC_ATTR
SXC_ATTRT
SXC_CLASS
SXC_COCO
SXC_EXIT
SXC_FCODE
SXC_FCODET
SXC_IMPSWH
SXC_SCRN
SXC_TABLE
SXC_TABLET
Regards
Anji -
How to find R/3 table for FI and PS Datasources
Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
ShanthiHi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK -
Source tables for forms and tabular forms must have a primary key.
Why does HTML DB 2.0 return the message
"Source tables for forms and tabular forms must have a primary key."
when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
bw - ChristianChristian,
In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
Regards,
Marc -
Peoplecode to get dropdownlist box value and its description
Hi,
I have assigned a value and its description to dropdownlist box. when try to get the value and description in somewhere, i didn't get the description. i got only the value of the current row in a rowset. but i want to fetch the description which i assigned to the dropdownlist for the corresponding value. Is there any way to get the description?Since it is not a XLAT bound to the field, you cannot use the field class properties.
What is the source of the dropdownlist?
If it comes from a database record, you could fetch the description from the database using the &Field.Value as input.
But this would cause a lot of database roundtrips.
You could store the value and description in a two dimensional component array variable and load this array with the values and descriptions at PostBuild Event.
This will only fires ones during the component build.
Suppose the values are "hardcoded", something like this
/* Create component 2-dim array */
Component array of array of string &DropdownArray;
&DropdownArray = CreateArrayRept("", 0);
&DropdownArray.Push(CreateArray("value1", "descr1");
&DropdownArray.Push(CreateArray("value2", "descr2");
&DropdownArray.Push(CreateArray("value3", "descr3");
After this populate the dropdownlist with values and descriptions from the array.
For &i = 1 To &DropdownArray.Len
&Field.AddDropDownItem(&DropdownArray[&i][1], &DropdownArray[&i][2]);
End-For;
Whenever you need to fetch the description of the dropdownlist value, first find the value by &Field.Value and then search within the array for the description.
/*Get value from dropdown */
&Value = &Field.Value;
/*Find index for value*/
&Ind = &DropdownArray.Find(&Value);
/*Get description (second index in subarray)*/
&Descr = &DropdownArray [&Ind][2];
I am writing the code without an environment, so typos could exist
Hope this helps. -
To fetch proj.definition and its description
Hai Friends,
From CJ03 i want to fetch project definition and its description. i have WBS and AUC number.how can i fetch this?.
I checked in PROJ table but i could not able to take from WBS or AUC. where can i fetch this?.hi vennila,
i refered the tables in my ides. I think following information will be of use to u.
try out in the table PRPS
in this table there is a field PSPHI (project)
Regards
Sajid -
Hi.
i want to find batch for material and the description for that particular batch.so in which table i get it?
can anyone help me...try to Use FM <b>read_text</b> with following EXports
text name : batch name(proper format )
text Lang : EN / Hindi /telugu like that
text Id : VERM
text Object : CHARGE
for more Details check the Tcode <b>BMBC</b>
Regards
Prabhu
Njoy SAP
Message was edited by: Prabhu Peram -
How to fill up set up tables for 2lis_03_UM and BF?
Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanksHi,
I think you can follow the same procedure. After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM -
Table for Customer and vendor open balance on a key date
Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu
Maybe you are looking for
-
it is possible to write something approaching an if..then..else statement in SQL with 'generalized' conditions in the if statement. Attached is the query for the payment register, in which I've written a series of decode statements, one for each poss
-
How to enable traffic between VPN clients in Windows Server 2012 R2?
Hello, I installed Remote Access role with VPN. IPv4 Router is enabled: http://snag.gy/UAMY2.jpg VPN clients should use static ip pool: http://snag.gy/REjkB.jpg One VPN user is configured to have static ip: http://snag.gy/TWwq0.jpg VPN server uses W
-
How i can show the user input in alv list on the top
hi all, please tell me how i can show the user input in alv list on the top. and also tell me how i can hide the toolbar in alv. regards vikas saini
-
Hello, I have a Lexmark all-in-1, S400 Series. Has worked fine up to a few days ago. Nothing is printing. I am getting the message: "There is a problem communicating with the printer" although the MBP printer window also indicates "printer ready" I'v
-
TS1372 my i pod nano will not sync keeps saying unknown error -123
cannot sync i pod nano