Table for viewing SHC details and Confirmation details

Hi All,
I would like to ask in which table can i get SHC details in SRM (SHC Num, Company Code, Business Area, Created By)
I would also like to get same details for Confirmations in SRM.
Thanks!

Hi,
Go to T.code: BBP_PD
Enter the object type : BUS 2121 for shopping cart
and execute and click on the shopping cart no
You can see  all the tables for the shopping cart no.
For Confirmation check :BBP_PDCON this is also appearing in the above t.code
Please check and reply
Regards
Ganesh Kumar .G

Similar Messages

  • Tables for SD partner details

    hi,
    Can anybody help me to get tables for SD partner details?
    Any useful answer will be rewarded.
    Thanks & Regards
    Naveen

    Hi,
    For order related parnter you can use the table VBPA
    For general customer master you can use the table KNA1
    Thanks
    Naren

  • When we go for view ,fm,infosetquery,and tables

    Hi Masters,
    1)when we go for view ,fm,infosetquery,and tables ?
    & how to create view ,fm,infosetquery,and tables ?
    2)what is user of numeric pointer?
    3)what is different between view ,fm,infosetquery,and tables ?
    4) what is user of view ,fm,infosetquery,and tables ?
    please help on this issue by give good understading answer

    Hi Kumar,
    1. Maintaining Generic DataSources.
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
    Create View:
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
    Create FM:
    http://help.sap.com/saphelp_nw04s/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/frameset.htm
    Create Table:
    http://help.sap.com/saphelp_nw04/helpdata/en/87/773a55f35a65409009e87261c84eb2/frameset.htm
    Create Infoset query:
    How to create infoset query
    what is an infoset and infoset query?
    Create Generic Delta:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    2. Numeric pointer:
    Generic Delta with Numeric pointer.
    Generic Delta Extraction
    Delta specific fields
    You can have the differences and the uses of View, FM, Infoset query and table from above links itself.
    Hope these helps u...
    Regards,
    KK.

  • Table for storing inventory details in FIFO base

    HI All,
    Can anyone help me in finding where I can get the Table for storing inventory details in FIFO base othe rthan OINM.
    Any kind of help will appreciated.
    Regards:
    Swati

    Hi Darius,
    I checked tables CIFV, OIVQ,SIVQ or UIVQ table.
    CIFV                                   - We can not fetch data from SQL.
    SIVQ, UIVQ                        - No records found
    OIVQ                                  - There is only 6607 records in this table but OINM is having 14085 so not all the transcation are in this      table.
    Still i am waiting for any help.
    I am using SAP 8.8 PL19.
    regards:
    Swati
    Edited by: SwatiGupta on Sep 16, 2011 7:52 AM

  • Tables for linking sales organization and customers

    Dear Sir,
    I am Nikhil. I want to know the tables for linking sales organization and customer.
    Please do help me.
    Regards,
    Nikhil

    you mean table KNVV?
    please post more details
    A.

  • Controller for View, Window, Interface, and Configuration Cannot Be Created

    Hi All,
      In our  Web Dynpro ABAP applicaton we  have a window and when we edit the conent of window and try to press "Cancel" button we are getting below error.
    Controller for View, Window, Interface, and Configuration Cannot Be Created
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: GET_CONTROLLER of program CL_WDR_COMPONENT==============CP
    Method: GET_ACTION_FROM_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================
    Do any one have idea regarding this error.
    Regards
    CB

    Hi,
    Sounds bit strange to me, if you edit your window and do not want to save your changes then i would not expect this error. assuming that the component does not have activation problem.
    Just for making sure.
    I assume that your problem is on design time and not runtime.
    If it is a design time and problem still exists, try to delete this window, save ,activate and then recreate this window,embed your view(s).
    If it is runtime problem then i would suggest you to do debugging and find out where it is getting this error.

  • Transaction code for viewing invoice document and Claims document

    Hi Experts,
    Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
    I am in CRM and i do not know about the ECC transaction codes.
    request you 2 help.
    Thanks and Regards
    Shilpi

    hi,
    MM flow:
    purchase Requestion (ME51)
    Request for Quatation (ME41)
    Quatation from different vendors (ME47)
    price comparision (ME49)
    purchase order send to vendors (ME22)
    goods reciepts (MIGO)
    logistic invoice verification (MIRO)
    SD flow:
    Enquirey (VA11)
    Quatation (VA21)
    sales order processing (VA01)
    delivery (VL01)
    billing (VF01)
    Also follow this link.
    The specified item was not found.
    i hope this will help you out
    -Thanks & regards
    Saurabh Goel

  • Table for total actual cost and total actual revenue.

    Hi Gurus,
    Can anybody pls tell me what is the table for total acutal cost and total actual revenue for a service order.
    Thanks in advance.
    Regards
    Satish

    Check COSP

  • [svn:cairngorm3:] 17872: Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup .

    Revision: 17872
    Revision: 17872
    Author:   [email protected]
    Date:     2010-09-27 08:04:40 -0700 (Mon, 27 Sep 2010)
    Log Message:
    Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup. http://www.spicefactory.org/forum/viewtopic.php?p=3932. Added new sample to show model and view state interactions.
    Modified Paths:
        cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpBase.as
        cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpFactory.as
        cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpWrapper.as
        cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
        cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopup.mxml
        cairngorm3/trunk/libraries/PopupTest/src/samples/PopUpPM.as
    Added Paths:
        cairngorm3/trunk/libraries/PopupTest/src/PopUpModelExample.mxml
        cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopupWithModel.mxml

    Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
    Sadly, the following issue is NOT fixed for me. Is it with new projects only?  I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
    On the list above...
    Switching between sequences can turn the render bar red.
    This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
    1) Create two sequences with multiple short clips (the more clips the better)
    2) Make sure GPU acceleration is enabled.
    3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
    4) Hit SAVE.
    5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
    6) Toggle back to the original sequence and the delay occurs again.
    7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
    Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
    Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
    Sigh.

  • Table for total planned hrs and total confirmed hrs in prodution order

    Hi guys,
    I am creating a report for which i need total planned hrs (set up + machine + any other) and confirmed hrs.
    For eg., a production order has 10 qty. Standard values are Set up time is 20 min and machine time 5 min for a base quantitiy of 1. So here the planned hrs are 20 + (5*10) = 70 min.
    In which table can i find this planned hrs. I can see the standard value in AFVV table. But what logic can i use for calculating the total planned hrs.
    Is there any function module for this ?
    Thanks
    Srini

    Hi Srini,
    The following details are available in the table AFVV,
    Standard value, operation qty & Base qty.
    With this values create a formula Standard value * operation qty/ Base qty , this will equal to the planned hours for that particular activity type. Similarlt planned hours for other activities can be calculated.
    The actual/confirmed hours are available in the table AFRU.
    Regards,
    Senthilkumar

  • Table for C form Details in sales order

    Hi Experts,
    what is the table for details of C, H, I, etc forms against sales order.
    Thanks,
    Anu

    Hi
    yes i checked by step no. but step of this value in not available in KONV
    like ZDCM is on 125 step value available and JASS is on 170 value is available but
    NET EX MILL PRICE is on 160 and this 160 step is not available.
    Regards
    Abhi

  • Table to view the details of Load Process

    Hi All,
    Can anyone give me the 'table name' to see the time taken by each component involved in Extraction & Loading process like start time and end time of Extraction, Transfer, Update to PSA, Transfer Rules, Update Rules and Update to Data Target. Or else suggest me the best way to get this details.(Apart from DETAILS tabstrip in Monitor/RSMO) I need to notedown the time for more than 30 cubes and for 30 days.
    Thanks in Advance
    Regards,
    -Adhi.

    Hi,
       If you need more details regarding the complete setup of tables for the WHM activies etc, let me know u r email address or mail me at [email protected]
    regards,
    ravi

  • Tcode or table to view the details of user

    Hello Experts
    Can anybody tell the TCode or Table which tells the details of user with the report used by them on last used date.
    Thanks in Advance
    Neha

    Ha ve a look at all the RSDDSTAT* tables if BI statistics is active, you might also want to install the relevant BI content to facilitate its analysis.  If BI statistics is inactive you'll need to activate it before you can do any such analysis (RSA1: Tools menu).
    Eric

  • Transaction code for viewing billing details of a customer.

    Hi
    Do we have any tansaction code where we can view all the invoices related with a customer for a particular month.
    Please advise.
    Kind regards.
    Kate

    hi
    In R/3 VF05 will show list of all the invoices for the date chosen by the user entry
    This will show only list for a particular payer and material combination
    Regards
    N Ganesh

  • Tables for previous emp exp and present.

    Hi experts,
    I created a view based on 2 tables i.e PA0023 - HR Master Record: Infotype 0023 (Other/Previous
    Employers) and PA0000 - HR Master Record: Infotype 0000 (Actions).
    But I am unable to get the records of employees who are freshers.
    Bcz PA0023 does not hold freshers data.
    Is there any table which holds both the Previous employers data as well as freshers data.
    Regards,
    Nishuv.

    hi
    depends what freshers data you are wanting to update, there is no separate table for freshers employment data (as they are freshers) you can use the same infotype to store their apprentice ship details etc.......if you do not want the same to be counted as experience in some report that you may have developed for experience you may have to put a custom field for maintaining the same or configure the work/contract type here.
    hope this helps.....or give more details
    best regards

Maybe you are looking for

  • How can I move data from one loop to another?

    I am using LabVIEW to record and display data.  The problem that I have run into is that if I try to collect and display the data all in one loop data points are lost because the loop takes so long to execute.  I decided to break my program into two 

  • Cannot install itunes 10.6, or quicktime 7, tried the system config utility, uninstalled itunes

    I've uninstalled all security programs, followed the apple instructions using the system configuration utility, run windows update on my XP SP3 system, and I've uninstalled all apple programs including itunes and quicktime.  i cannot install the new

  • Timestamp problem on electronic signatures

    On time stamps for electronic signatures, it adds -05'00'. We don't want that in the date stamp. How do we resolve this issue? Adobe Acrobat X Pro Version 10.1.13

  • Convert Outlook Contacts to Address Book - Help

    I am trying to convert Outlook Contracts to Snow Leopard Mac Address Book. I have been successful in converting and importing all contacts, but contacts with multiple e-mail addresses in Outlook Contacts only imported one e-mail per contact. My sourc

  • 2 different emails - Photoshop / Behance

    hello. I bought photoshop with an email but for years I have a Behance account with another email. how do I change email in the cloud that I see my accout Behance but I can also make updates with the other mail address? is it possible? thank you